AG — Agricultural
Minimum lot area 10 acres, minimum lot width 200 feet. Confirm the current zoning map, any overlay district, PUD or development agreement conditions, and the cited section text before acting.
Lot size and width in Round Rock, TX
What the Round Rock zoning ordinance says about lot size and width, district by district. Section numbers link to the official ordinance.
SF-R — Single-Family - Rural
Minimum lot area 2 acres, minimum lot width 200 feet. Confirm the current zoning map, any overlay district, PUD or development agreement conditions, and the cited section text before acting.
SF-1 — Single-Family - Large Lot
Minimum lot area 10,000 square feet, minimum lot width 70 feet. Confirm the current zoning map, any overlay district, PUD or development agreement conditions, and the cited section text before acting.
SF-2 — Single-Family - Standard Lot
Conventional lot: minimum 6,500 square feet and 50 feet wide. Zero lot line: 5,500 square feet and 45 feet. Village residential: 5,000 square feet and 40 feet. Which option applies depends on how the subdivision was approved. Confirm the current zoning map, any overlay district, PUD or development agreement conditions, and the cited section text before acting.
SF-3 — Single-Family - Mixed Lot
Estate lot: minimum 10,000 square feet and 70 feet wide. Standard lot: 6,500 square feet and 50 feet. Small lot: 5,000 square feet and 40 feet. Confirm the current zoning map, any overlay district, PUD or development agreement conditions, and the cited section text before acting.
SF-D — Single-Family - Downtown
Minimum lot area 4,356 square feet. No minimum lot width is listed in the Sec. 2-26 chart. Confirm the current zoning map, any overlay district, PUD or development agreement conditions, and the cited section text before acting.
MH — Manufactured Housing
Minimum lot area 6,500 square feet, minimum lot width 50 feet, minimum lot depth 110 feet. Confirm the current zoning map, any overlay district, PUD or development agreement conditions, and the cited section text before acting.
TF — Two-Family
Minimum lot area 3,500 square feet, minimum lot width 35 feet. Confirm the current zoning map, any overlay district, PUD or development agreement conditions, and the cited section text before acting.
TH — Townhouse
Single-lot (fee simple) townhouses: minimum 2,500 square feet per unit and 25 feet of width per unit. Common-lot development: minimum 20,000 square feet and 150 feet wide. Confirm the current zoning map, any overlay district, PUD or development agreement conditions, and the cited section text before acting.
SR — Senior
Minimum lot area 20,000 square feet, minimum lot width 50 feet. Confirm the current zoning map, any overlay district, PUD or development agreement conditions, and the cited section text before acting.
MF-1 — Multifamily - Low Density
Minimum lot area 10,000 square feet for buildings with four or fewer units, 20,000 square feet otherwise, with minimum lot width 100 feet. Confirm the current zoning map, any overlay district, PUD or development agreement conditions, and the cited section text before acting.
MF-2 — Multifamily - Medium Density
Minimum lot area 1 acre, minimum lot width 200 feet. Confirm the current zoning map, any overlay district, PUD or development agreement conditions, and the cited section text before acting.
MF-3 — Multifamily - Urban
Lot standards are set in each approved PUD, not in the citywide chart (Sec. 2-24(c)). Check the adopting PUD ordinance for the property. Confirm the current zoning map, any overlay district, PUD or development agreement conditions, and the cited section text before acting.
Get the full picture for your property
Enter an address. We identify the zoning district and assemble what the ordinance says about it: permitted uses, dimensional rules, accessory structures, and the approval process.
District identification is free. The full brief is $79.