What the Kyle zoning ordinance says about lot size and width, district by district. Section numbers link to the official ordinance.
Chart 1 in Sec. 53-33(k) sets a 43,500 square foot minimum lot area and 150 foot minimum street line width for District A. Sec. 53-36 separately states a minimum one acre tract (43,560 square feet), a 60 square foot difference the code does not reconcile. Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.
Chart 1 lists a 22,500 square foot minimum lot area and 100 foot minimum width for UE, while Sec. 53-37 requires lots of at least one acre. The two provisions conflict and the code does not say which controls. Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.
Chart 1: minimum lot area 5,000 square feet, minimum street line width 50 feet, for existing R-1 lots only (note 16). Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.
Chart 1: minimum lot area 8,190 square feet and minimum width 80 feet. Note 1 lets the city council approve up to 25 percent of lots in a section or phase at not less than 7,200 square feet and 65 feet wide. Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.
Chart 1: minimum lot area 6,825 square feet and minimum width 65 feet. Note 1 lets the council approve up to 25 percent of lots at not less than 5,825 square feet and 55 feet wide. Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.
Chart 1: minimum lot area 5,540 square feet and minimum width 50 feet. Note 1 lets the council approve up to 25 percent of lots at not less than 4,740 square feet and 45 feet wide. Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.
Chart 1: minimum lot area 4,550 square feet and minimum width 35 feet, with note 1 allowing up to 25 percent of lots at not less than 4,000 square feet and 30 feet wide. Sec. 53-111 separately recites a 4,800 square foot minimum lot size, a conflict the code does not resolve. Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.
Chart 1: minimum lot area 880 square feet per townhouse lot and minimum width 22 feet. Note 1 lets the council approve up to 25 percent of lots at not less than 800 square feet and 20 feet wide. Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.
Sec. 53-174 density: 9,000 square foot lot for two units, 10,000 square feet for four units, and for acreage tracts up to 36 units per buildable acre with a three unit minimum. Chart 1 lists 9,000 square feet minimum lot area and 80 feet minimum width. Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.
Chart 1: minimum lot area 9,000 square feet and minimum width 80 feet. Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.
Chart 1 note 5: minimum lot area is 12,000 square feet plus 1,500 square feet for each dwelling unit over four, with minimum lot width 80 feet, subject to the 12 units per buildable acre density cap (Sec. 53-240). Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.
Chart 1 note 5: minimum lot area 12,000 square feet plus 1,500 square feet per dwelling unit over four, minimum width 80 feet, subject to the 21 unit per acre density cap. Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.
Chart 1 note 12: minimum lot area for R-3-3 is 12,000 square feet plus 1,500 square feet for each residential unit, and minimum lot width is 90 feet. The chart row cross references a misnumbered note, so read notes 12 and 13 together. Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.
Chart 1: minimum lot area 8,190 square feet and minimum width 80 feet. Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.
Chart 1: minimum lot area 8,190 square feet and minimum width 80 feet. Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.
Chart 1 has no M-3 row. Sec. 53-384(3) requires a park development to meet all M-2 district requirements (8,190 square feet, 80 foot width in chart 1) plus the manufactured home park ordinance and chapter 41 subdivision rules. Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.
Sec. 53-655: each RV lot must be at least 2,500 square feet and 35 feet wide, with at least 25 feet of clearance between vehicles (10 feet end to end) and at least 10 feet from any park building or boundary line. Lots must abut an internal driveway at least 36 feet wide with hard surfacing. Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.
Enter an address. We identify the zoning district and assemble what the ordinance says about it: permitted uses, dimensional rules, accessory structures, and the approval process.
District identification is free. The full brief is $79.