ZoningVerdict

Lot size and width in Wylie, TX

What the Wylie zoning ordinance says about lot size and width, district by district. Section numbers link to the official ordinance.

AG/30 — Agricultural District

Minimum lot area is 2 acres, minimum lot width 200 ft (corner lots 230 ft), minimum lot depth 300 ft. Minimum dwelling floor area 3,000 sq ft.

SF-ED — Single Family - Estate District

Minimum lot area is 1 acre (43,560 sq ft), minimum lot width 100 ft (corner lots 175 ft), minimum lot depth 200 ft. Minimum dwelling floor area 1,900 sq ft.

SF-20/26 — Single Family - 20 District

Minimum lot area is 20,000 sq ft, minimum lot width 100 ft (corner lots 115 ft), minimum lot depth 150 ft. Minimum dwelling floor area 2,600 sq ft.

SF-10/24 — Single Family - 10 District

Minimum lot area is 10,000 sq ft, minimum lot width 75 ft (corner lots 90 ft), minimum lot depth 100 ft. Minimum dwelling floor area 2,400 sq ft.

TH — Townhouse District

Minimum lot area is 3,500 sq ft for exterior lots with side yards and 3,000 sq ft for interior lots with no side yards; minimum lot width 30 ft (corner lots 45 ft), minimum lot depth 100 ft. Minimum floor area 1,000 sq ft for duplex units and 1,200 sq ft for units in buildings of three or more dwellings.

MF — Multifamily District

Minimum lot area is 43,560 sq ft, minimum lot width 100 ft at the street (length-to-width ratio 1:3 or less), minimum lot depth 150 ft. Maximum density 15 dwelling units per gross acre. Minimum unit floor area: efficiency 750 sf, one bedroom 900 sf, two bedroom 1,000 sf, three bedroom 1,200 sf.

MH — Manufactured Home District

Minimum subdivision area is 2 acres; minimum individual lot area is 7,200 sq ft, minimum lot width 60 ft (corner lots 70 ft), minimum lot depth 100 ft. Minimum dwelling floor area 1,000 sq ft.

NS — Neighborhood Service

Figure 4-1 states height, stories, setbacks, and lot coverage for this district but does not tabulate a minimum lot area. Confirm any lot area requirement in the cited section and with Planning and Zoning before relying on one.

CR — Community Retail

Figure 4-2 states height, stories, setbacks, and lot coverage for this district but does not tabulate a minimum lot area. Confirm any lot area requirement in the cited section and with Planning and Zoning before relying on one.

CC — Corridor Commercial District

Figure 4-3 states height, stories, setbacks, and lot coverage for this district but does not tabulate a minimum lot area. Confirm any lot area requirement in the cited section and with Planning and Zoning before relying on one.

BG — Business Government

Figure 4-4 states height, stories, setbacks, and lot coverage for this district but does not tabulate a minimum lot area. Confirm any lot area requirement in the cited section and with Planning and Zoning before relying on one.

LI — Light Industrial District

Figure 4-5 states height, stories, setbacks, and lot coverage for this district but does not tabulate a minimum lot area. Confirm any lot area requirement in the cited section and with Planning and Zoning before relying on one.

HI — Heavy Industrial District

Figure 4-6 states height, stories, setbacks, and lot coverage for this district but does not tabulate a minimum lot area. Confirm any lot area requirement in the cited section and with Planning and Zoning before relying on one.

Get alerted when Wylie zoning rules change

$49/month. An email when a human-reviewed rule change is published for Wylie — with the citation, the date, and a link to the updated page. Quiet months get a short note confirming we checked. Cancel any time.

Alerts come only from reviewed changes, never from raw ordinance-site noise. Billing via Stripe; unsubscribe and cancellation links in every email.

Get the full picture for your property

Enter an address. We identify the zoning district and assemble what the ordinance says about it: permitted uses, dimensional rules, accessory structures, and the approval process.

District identification is free. The full brief is $79.