SF-4 — Single-Family 4 District
Minimum lot area 6,000 sq. ft., minimum lot width (at building line) 60 feet, minimum floor area 1,200 sq. ft. (Article III, Table J).
Lot size and width in Little Elm, TX
What the Little Elm zoning ordinance says about lot size and width, district by district. Section numbers link to the official ordinance.
A-1 — Single-Family A-1 District
Minimum lot area 10,000 sq. ft., minimum lot width (at building line) 80 feet, minimum floor area 1,500 sq. ft. (Article III, Table D).
A-2 — Single-Family A-2 District
Minimum lot area 6,000 sq. ft. with public sewer, 1 acre without. Minimum lot width (at building line) 60 feet. Minimum floor area 1,000 sq. ft. (Article III, Table E).
SF-RE — Single-Family Ranchette Estate District
Minimum lot area 1 acre. Minimum lot width (at building line) 120 feet. Minimum floor area 2,400 sq. ft. (Article III, Table F).
SF-1 — Single-Family 1 District
Minimum lot area 10,000 sq. ft., minimum lot width (at building line) 60 feet, minimum floor area 2,000 sq. ft. (Article III, Table G).
SF-2 — Single-Family 2 District
Minimum lot area 8,000 sq. ft., minimum lot width (at building line) 60 feet, minimum floor area 1,600 sq. ft. (Article III, Table H).
SF-3 — Single-Family 3 District
Minimum lot area 7,000 sq. ft., minimum lot width (at building line) 60 feet, minimum floor area 1,400 sq. ft. (Article III, Table I).
SF-X — Single-Family Mixed Size District
Three tiers within the same subdivision: smallest lot 60 feet wide / 10,000 sq. ft. / 1,800 sq. ft. floor area (up to 50 percent of lots), medium lot 75 feet wide / 14,520 sq. ft. (1/3 acre) / 2,000 sq. ft. floor area, largest lot 90 feet wide / 21,780 sq. ft. (1/2 acre) / 2,400 sq. ft. floor area (at least 20 percent of lots) (Article III, Table K).
D — Duplex District
Minimum lot width 60 feet (or two 30-foot lots if the shared wall is a fire wall). Minimum lot area 2,500 sq. ft. per family with sewer, 10,000 sq. ft. per family without. Minimum floor area 700 sq. ft. per family (Article III, Table L).
TH — Townhome District
Minimum lot width (at building line) 25 feet, minimum lot depth 100 feet, maximum block length 600 feet (Article III, Table M).
PH — Patio Home District
Minimum lot width (at building line) 35 feet, minimum lot depth 100 feet, maximum block length 600 feet (Article III, Table N).
MF — Multifamily District
Maximum density 16 dwelling units per acre. Maximum lot coverage 40 percent. Minimum lot width 70 feet (at property line and on curve at building line). Minimum floor area by unit size: one bedroom 650 sq. ft., two bedroom 800 sq. ft., three bedroom 1,000 sq. ft., each additional bedroom over three adds 200 sq. ft. (Article III, Table O).
MH-1 — Manufactured Home District
Minimum lot area 6,000 sq. ft., minimum lot width (at building line) 60 feet, minimum floor area 1,000 sq. ft. (Article III, Table P).
AG — Agricultural District
Minimum lot area 5 acres, minimum lot width (at building line) 60 feet, minimum floor area 1,600 sq. ft. (Article III, Table Q).
O — Office District
Minimum lot width 50 feet, minimum lot area 1 acre (Article III, Table R).
NS — Neighborhood Services District
Minimum lot width 50 feet. Minimum lot area 1 acre, unless otherwise approved through the site plan process (Article III, Table S, Note 3).
CF — Community Facilities District
No minimum lot width or lot area. Minimum open space 15 percent, maximum impervious area 75 percent (Article III, Table T).
LC — Light Commercial District
Minimum lot width 50 feet. Minimum lot area 1 acre, unless otherwise approved through the site plan process. Maximum lot coverage 70 percent (Article III, Table U). Standards allow administrative modification of up to 10 percent (Sec. 106.03.03(e)(2)).
HC — Heavy Commercial District
Minimum lot width 50 feet. Minimum lot area 1 acre, unless otherwise approved through the site plan process (Article III, Table V).
LI — Light Industrial District
No minimum lot width. Minimum lot area 1 acre, unless otherwise approved through the site plan process (Article III, Table W).
HI — Heavy Industrial District
No minimum lot width. Minimum lot area 1 acre, unless otherwise approved through the site plan process (Article III, Table X).
Get the full picture for your property
Enter an address. We identify the zoning district and assemble what the ordinance says about it: permitted uses, dimensional rules, accessory structures, and the approval process.
District identification is free. The full brief is $79.