What the Hutto zoning ordinance says about lot size and width, district by district. Section numbers link to the official ordinance.
SF-R minimum lot area is 87,120 sq. ft. (2 acres) with a minimum lot width of 200 ft. at the building line (UDC 10.403.3). Flag lots need at least 50 ft. of frontage on a public right-of-way. Confirm plat notes and any PUD or overlay conditions before relying on these figures.
SF-1 minimum lot area is 7,800 sq. ft. with 60 ft. minimum width at the building line (UDC 10.403.3). The chart lists variant columns: 5,500 sq. ft. and 50 ft. width for alley load, cul-de-sac, or detached garage lots; 5,000 sq. ft. and 45 ft. width for zero lot line; 4,500 sq. ft. and 45 ft. width for village lots. Width to depth ratio for single household lots must be at least 1:3. Confirm which column applies to your lot type before relying on a figure.
SF-2 minimum lot area is 4,500 sq. ft. with 45 ft. minimum width at the building line (UDC 10.403.3). Within a townhouse development, internal lots for individual ownership with undivided interest in common areas may be smaller than 4,500 sq. ft. and narrower than 45 ft. Confirm plat notes and the exact chart cell before relying on these figures.
MF minimum lot area is 20,000 sq. ft. with 100 ft. minimum width at the building line (UDC 10.403.3). Density must range from 14 to 20 dwelling units per acre net (UDC 10.303.5). Confirm the chart cell and any PUD or site plan conditions before relying on these figures.
MH minimum site area is 217,800 sq. ft. (5 acres) with 200 ft. minimum width at the building line (UDC 10.403.3). Internal manufactured home spaces are governed by the park standards in UDC 10.306.17 rather than the district lot chart. Confirm both layers before relying on a figure.
Enter an address. We identify the zoning district and assemble what the ordinance says about it: permitted uses, dimensional rules, accessory structures, and the approval process.
District identification is free. The full brief is $79.