Lot size and width in Anna, TX

What the Anna zoning ordinance says about lot size and width, district by district. Section numbers link to the official ordinance.

AG — Agricultural

Minimum lot area 43,560 square feet (1 acre). Minimum lot width 100 feet. Minimum lot depth 150 feet. Maximum lot coverage 30 percent.

Table 2 (Sec. 9.04.009(c))

SF-20.0 — Single-Family Residential (SF-20.0)

Minimum lot area 20,000 square feet. Minimum lot width 100 feet. Minimum lot depth 150 feet. Maximum lot coverage 35 percent.

Table 3 (Sec. 9.04.010(c))

SF-14.5 — Single-Family Residential (SF-14.5)

Minimum lot area 14,500 square feet. Minimum lot width 90 feet. Minimum lot depth 135 feet. Maximum lot coverage 35 percent.

Table 4 (Sec. 9.04.011(c))

SF-12.0 — Single-Family Residential (SF-12.0)

Minimum lot area 12,000 square feet. Minimum lot width 80 feet. Minimum lot depth 120 feet. Maximum lot coverage 45 percent.

Table 5 (Sec. 9.04.012(c))

SF-10.5 — Single-Family Residential (SF-10.5)

Minimum lot area 10,500 square feet. Minimum lot width 80 feet. Minimum lot depth 120 feet. Maximum lot coverage 40 percent.

Table 6 (Sec. 9.04.013(c))

SF-8.4 — Single-Family Residential (SF-8.4)

Minimum lot area 8,400 square feet. Minimum lot width 70 feet. Minimum lot depth 120 feet. Maximum lot coverage 50 percent.

Table 7 (Sec. 9.04.014(c))

SF-7.2 — Single-Family Residential (SF-7.2)

Minimum lot area 7,200 square feet. Minimum lot width 60 feet. Minimum lot depth 120 feet. Maximum lot coverage 50 percent.

Table 8 (Sec. 9.04.015(c))

SF-6.0 — Single-Family Residential (SF-6.0)

Minimum lot area 6,000 square feet. Minimum lot width 50 feet. Minimum lot depth 120 feet. Maximum lot coverage 50 percent.

Table 9 (Sec. 9.04.016(c))

MD — Mixed-Density Residential

Minimum lot area 4,500 square feet. Minimum lot width 25 feet. Minimum lot depth 80 feet. Maximum lot coverage 60 percent. Attached single-family and two-family dwellings: minimum 2,400 square feet per unit, minimum lot width 20 feet per ground floor unit plus side yard requirements (Sec. 9.04.017(d)(1)-(2)).

Table 10 (Sec. 9.04.017(c))

MF — Multi-Family Residential

Minimum lot area 5,000 square feet. Minimum lot width 50 feet. Minimum lot depth 120 feet. Maximum lot coverage 50 percent. No lot with multifamily units may be under 10,000 square feet, and no lot with a Single-Unit or Duplex Unit Park may be under 20,000 square feet (Sec. 9.04.018(d)(3)-(4)). Maximum density: 25 units per acre for multifamily dwellings, 12 units per acre for Townhome Units and Single-Unit or Duplex Unit Parks (Sec. 9.04.018(d)(8)-(9)).

Table 11 (Sec. 9.04.018(c))

C-1 — Local Commercial

Minimum lot area 7,000 square feet. Minimum lot width 50 feet. Minimum lot depth 100 feet. Maximum lot coverage 50 percent.

Table 12 (Sec. 9.04.019(c))

C-2 — Regional Commercial

Minimum lot area 10,000 square feet. Minimum lot width 60 feet. Lot depth: not applicable. Maximum lot coverage 70 percent.

Table 13 (Sec. 9.04.020(c))

MU — Mixed-Use

Minimum lot area: not applicable. Minimum lot width 25 feet. Lot depth: not applicable. Minimum lot coverage 35 percent.

Table 14 (Sec. 9.04.021(c))

I-1 — Light Industrial

Minimum lot area 10,000 square feet. Minimum lot width 50 feet. Lot depth: not applicable. Maximum lot coverage 50 percent.

Table 16 (Sec. 9.04.023(c))

I-2 — Heavy Industrial

Minimum lot area 10,000 square feet. Minimum lot width 50 feet. Lot depth: not applicable. Maximum lot coverage 50 percent.

Table 17 (Sec. 9.04.024(c))

PD — Planned Development

A Planned Development (PD) district requires a minimum of 5 contiguous acres. All other dimensional standards (density, lot area, lot width, lot depth, yard depths and widths, building height, coverage, floor area ratio) are set individually in each PD's adopting ordinance (Sec. 9.04.026(d)(1)). Confirm the specific adopting ordinance for the property.

Sec. 9.04.026(c)

Get the full picture for your property

Enter an address. We identify the zoning district and assemble what the ordinance says about it: permitted uses, dimensional rules, accessory structures, and the approval process.

District identification is free. The full brief is $79.