What the Mount Juliet zoning ordinance says about lot coverage, district by district. Section numbers link to the official ordinance.
Maximum building coverage in AR-40 is 15 percent of lot area. The maximum impervious-surface ratio is N/A where Table 5-103a gives a number; where the table says N/A, confirm any stormwater or site-design limit separately (Section 5-103, Table 5-103a).
Maximum building coverage in RS-40 is 15 percent of lot area. The maximum impervious-surface ratio is N/A where Table 5-103a gives a number; where the table says N/A, confirm any stormwater or site-design limit separately (Section 5-103, Table 5-103a).
Maximum building coverage in RS-30 is 18 percent of lot area. The maximum impervious-surface ratio is N/A where Table 5-103a gives a number; where the table says N/A, confirm any stormwater or site-design limit separately (Section 5-103, Table 5-103a).
Maximum building coverage in RS-20 is 25 percent of lot area. The maximum impervious-surface ratio is N/A where Table 5-103a gives a number; where the table says N/A, confirm any stormwater or site-design limit separately (Section 5-103, Table 5-103a).
Maximum building coverage in RS-15 is 30 percent of lot area. The maximum impervious-surface ratio is N/A where Table 5-103a gives a number; where the table says N/A, confirm any stormwater or site-design limit separately (Section 5-103, Table 5-103a).
Maximum building coverage in RS-10 is 35 percent of lot area. The maximum impervious-surface ratio is N/A where Table 5-103a gives a number; where the table says N/A, confirm any stormwater or site-design limit separately (Section 5-103, Table 5-103a).
Maximum building coverage in R-10 is 40 percent of lot area. The maximum impervious-surface ratio is N/A where Table 5-103a gives a number; where the table says N/A, confirm any stormwater or site-design limit separately (Section 5-103, Table 5-103a).
Maximum building coverage in R-MHP is see Section 5-104.2 of lot area. The maximum impervious-surface ratio is 60 percent where Table 5-103a gives a number; where the table says N/A, confirm any stormwater or site-design limit separately (Section 5-103, Table 5-103a).
Maximum building coverage in RM-8 is 50 percent of lot area. The maximum impervious-surface ratio is 70 percent where Table 5-103a gives a number; where the table says N/A, confirm any stormwater or site-design limit separately (Section 5-103, Table 5-103a).
Maximum building coverage in RM-16 is 50 percent of lot area. The maximum impervious-surface ratio is 70 percent where Table 5-103a gives a number; where the table says N/A, confirm any stormwater or site-design limit separately (Section 5-103, Table 5-103a).
Maximum building coverage in CG is 50 percent. Maximum impervious surface ratio is 80 percent (Section 6-103, Table 6-103a).
Maximum building coverage in CI is 50 percent. Maximum impervious surface ratio is 80 percent (Section 6-103, Table 6-103a).
Maximum building coverage in CMU is 50 percent. Maximum impervious surface ratio is 80 percent (Section 6-103, Table 6-103a).
Maximum building coverage in CNS is 30 percent. Maximum impervious surface ratio is 70 percent (Section 6-103, Table 6-103a).
Maximum building coverage in OPS is 40 percent. Maximum impervious surface ratio is 70 percent (Section 6-103, Table 6-103a).
Maximum building coverage in CTC is 50 percent. Maximum impervious surface ratio is 70 percent (Section 6-103, Table 6-103a).
Maximum building coverage in CRC is 50 percent. Maximum impervious surface ratio is 70 percent (Section 6-103, Table 6-103a).
Maximum building coverage is 50 percent. Maximum impervious surface ratio is 80 percent for lots of two acres or less and 70 percent for lots greater than two acres (Section 7-103, Table 7-103A).
Maximum building coverage is 50 percent. Maximum impervious surface ratio is 80 percent for lots of two acres or less and 70 percent for lots greater than two acres (Section 7-103, Table 7-103A).
Enter an address. We identify the zoning district and assemble what the ordinance says about it: permitted uses, dimensional rules, accessory structures, and the approval process.
District identification is free. The full brief is $79.