What the Port St. Lucie zoning ordinance says about lot size and width, district by district. Section numbers link to the official ordinance.
Multifamily: 20,000 sq. ft. and 150 feet wide, capped at 11 du/acre gross project density. Single-family: 7,500 sq. ft. and 60 feet wide (5 du/acre cap). Single-family cluster: 4,000 sq. ft. per unit and 40 feet wide (11 du/acre cap). Townhouse: per Sec. 158.218 (11 du/acre cap). All other uses: 20,000 sq. ft. and 100 feet wide.
Multifamily: 30,000 sq. ft. and 150 feet wide, capped at 15 du/acre gross project density. Single-family: 7,500 sq. ft. and 60 feet wide (5 du/acre cap). Single-family cluster: 3,500 sq. ft. per unit and 40 feet wide (15 du/acre cap). Townhouse: per Sec. 158.218 (15 du/acre cap). All other uses: 20,000 sq. ft. and 100 feet wide.
Single-family dwelling: minimum 10 acres and 330 feet of width. All other permitted or special exception uses: minimum 20,000 square feet and 100 feet of width.
20,000 square feet minimum, 100 feet minimum width.
Single-family dwelling: 15,000 square feet minimum, 75 feet minimum width. All other permitted or special exception uses: 20,000 square feet, 100 feet width.
Single-family dwelling: 10,000 square feet minimum, 60 feet minimum width. All other permitted or special exception uses: 20,000 square feet, 100 feet width.
Single-family dwelling: 7,500 square feet minimum, 60 feet minimum width. All other permitted or special exception uses: 20,000 square feet, 100 feet width.
Multifamily: 20,000 sq. ft. and 100 feet wide, capped at 5 dwelling units/acre gross project density. Single-family: 7,500 sq. ft. and 60 feet wide (5 du/acre cap). Single-family cluster: 4,000 sq. ft. per unit and 40 feet wide (5 du/acre cap). Townhouse: per Sec. 158.218 (5 du/acre cap). All other uses: 20,000 sq. ft. and 100 feet wide.
Multifamily: 20,000 sq. ft. and 100 feet wide, capped at 8 du/acre gross project density. Single-family: 7,500 sq. ft. and 60 feet wide (5 du/acre cap). Single-family cluster: 4,000 sq. ft. per unit and 40 feet wide (8 du/acre cap). Townhouse: per Sec. 158.218 (8 du/acre cap). All other uses: 20,000 sq. ft. and 100 feet wide.
Mobile home park: 10 acres minimum, 175 feet minimum frontage, capped at 5 dwelling units/acre gross project density. All other permitted uses: 20,000 square feet, 100 feet width.
Not less than 20,000 square feet and 100 feet of width.
No minimum lot requirement.
20,000 square feet minimum, 100 feet minimum width; more than one use may share a lot as a single designed development under common ownership.
20,000 square feet minimum, 100 feet minimum width; more than one use may share a lot as a single designed development under common ownership.
Minimum 20,000 square feet and 100 feet of width; maximum lot size 4 acres. More than one use may share a lot as a single designed development under common ownership.
20,000 square feet minimum, 100 feet minimum width; more than one use may share a lot as a single designed development.
20,000 square feet minimum, 100 feet minimum width.
20,000 square feet minimum, 100 feet minimum width; more than one use may share a lot as a single designed development.
20,000 square feet minimum, 100 feet minimum width; more than one use may share a lot as a single designed development.
20,000 square feet minimum, 160 feet minimum width; more than one use may share a lot as a single designed development.
10,000 square feet minimum, 80 feet minimum width; billboards, transmission towers, and pumping/relay facilities may sit on smaller lots.
Per the Comprehensive Plan and conceptual plan approval, minimum 20,000 square feet. Maximum gross project density 11 units per acre.
Minimum PUD district size is 2 acres. No minimum lot size or yard is fixed by this chapter for individual lots within a PUD; the City Council may stipulate minimum lot sizes and yards as part of the rezoning approval, and land within a PUD abutting a conventional zoning district must meet that district's yard standards.
Set by the MPUD's approved conceptual master plan and regulation book rather than a fixed citywide number; review-gated per MPUD.
Enter an address. We identify the zoning district and assemble what the ordinance says about it: permitted uses, dimensional rules, accessory structures, and the approval process.
District identification is free. The full brief is $79.