Lot size and width in Pembroke Pines, FL

Minimum lot width 125 feet, minimum lot area 35,000 square feet (lots for utility uses are exempt from minimum lot size but must still meet setbacks). Confirm the current zoning map and the cited section text before acting.

Minimum lot width 100 feet, minimum lot area 10,000 square feet (a smaller lot of record may be used for a one-family dwelling if platted before 1969).

Minimum lot width 75 feet, minimum lot area 7,500 square feet (a smaller lot of record may be used for a one-family dwelling if platted before March 1969).

Minimum lot width 70 feet, minimum lot area 7,000 square feet (a smaller lot of record may be used for a one-family dwelling if platted before March 1969).

Minimum development size 5 acres. Minimum lot width 30 feet, minimum lot area 4,500 square feet.

Minimum lot width 40 feet, minimum lot depth 80 feet. Each R-MH district must be at least 5 acres in gross area and each lot must abut a public street at least 50 feet wide (LDC 155.423(D)).

Minimum lot width 70 feet, minimum lot area 7,000 square feet (if each half of a two-family dwelling is on separate adjoining lots, each lot must be at least 35 feet wide and 3,500 square feet).

Minimum lot size 1.5 acres. Maximum density 12 units per gross acre. Minimum unit size 800 square feet, minimum unit width 16 feet. A grouping of townhouses may not exceed 160 feet in length. See LDC 155.651 for additional townhouse development criteria.

Minimum lot size 12 gross acres (or 12 acres or less as a portion of a PUD); non-residential minimum width 100 feet and 10,000 square feet.

No minimum lot area or coverage specified. Minimum floor area 1,500 square feet.

Minimum lot area 15,000 square feet, with 150 feet of frontage on the primary traffic artery and 100 feet in depth. Minimum floor area 1,500 square feet per structure (exemption for outparcels platted before February 6, 1985 for a shopping facility).

Minimum lot area 15,000 square feet, with 150 feet of frontage on the primary traffic artery and 100 feet in depth. Minimum floor area 1,500 square feet per structure, or 325 square feet per dwelling unit, or 150 square feet per hotel/lodging sleeping room.

Minimum lot area 1 acre (43,560 square feet). No minimum lot dimensions specified.

Minimum lot area 6,000 square feet, minimum lot dimensions 60 feet wide by 100 feet deep.

No minimum lot area or dimensions specified. Minimum floor area 1,500 square feet.

Minimum lot area 10,000 square feet, minimum lot width 100 feet.

Minimum lot area 40,000 square feet, minimum lot width 200 feet. A special exception use under Table 155.442.2 needs a minimum lot area of 5 acres and minimum width of 500 feet.

Normally requires a minimum of 120 contiguous acres. The Planning and Zoning Board may consider a smaller parcel, but never less than 50 acres, if the applicant demonstrates the project meets PUD objectives.