{
  "design": {
    "drawn_at": "2026-10-19T18:58:28.938Z",
    "seed": "bcfe1f60d503d997109a9d198b12270c8c67c5a66b0ec8aaf7bfd4feab0c5027",
    "population_size": 6450,
    "sample_size": 385,
    "population_sha256": "75514eef4de077a9abb2f5d7c59a600248dbb5e9edfb5d078e6d80d046d70fef",
    "method": "Stratified random allocation (multivariate hypergeometric), SRS without replacement within city/topic/district-category strata; equal inclusion probability n/N.",
    "target": "95% Wilson interval; worst-case half-width <5 percentage points at n=385; no finite-population correction used.",
    "independent_pass": "Primary-source extraction without published body, citation, or golden facts; inaccessible selections remain unassessed, never replaced.",
    "strata": [
      {
        "key": "anna-tx|parking|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "anna-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "anna-tx|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "anna-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "anna-tx|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "anna-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "anna-tx|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "anna-tx|permitted_uses|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "anna-tx|setbacks|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "anna-tx|height|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "anna-tx|lot_size|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "anna-tx|permitted_uses|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "anna-tx|setbacks|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "anna-tx|height|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "anna-tx|lot_size|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "anna-tx|permitted_uses|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "anna-tx|setbacks|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "anna-tx|height|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "anna-tx|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "anna-tx|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "anna-tx|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "anna-tx|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "anna-tx|lot_size|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "anna-tx|permitted_uses|special",
        "population": 2,
        "selected": 1
      },
      {
        "key": "anna-tx|lot_size|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "anna-tx|setbacks|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "apex-nc|special_land_uses|special",
        "population": 2,
        "selected": 1
      },
      {
        "key": "apex-nc|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "apex-nc|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "apex-nc|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "apex-nc|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "apex-nc|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "apex-nc|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "apex-nc|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "apex-nc|permitted_uses|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "apex-nc|setbacks|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "apex-nc|height|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "apex-nc|lot_coverage|commercial",
        "population": 6,
        "selected": 1
      },
      {
        "key": "apex-nc|parking|commercial",
        "population": 2,
        "selected": 1
      },
      {
        "key": "apex-nc|signs|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "apex-nc|permitted_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "apex-nc|setbacks|special",
        "population": 5,
        "selected": 0
      },
      {
        "key": "apex-nc|height|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "apex-nc|lot_coverage|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "apex-nc|permitted_uses|residential",
        "population": 8,
        "selected": 0
      },
      {
        "key": "apex-nc|setbacks|residential",
        "population": 8,
        "selected": 1
      },
      {
        "key": "apex-nc|height|residential",
        "population": 8,
        "selected": 1
      },
      {
        "key": "apex-nc|lot_coverage|residential",
        "population": 8,
        "selected": 1
      },
      {
        "key": "apex-nc|lot_size|residential",
        "population": 8,
        "selected": 1
      },
      {
        "key": "apex-nc|permitted_uses|industrial",
        "population": 2,
        "selected": 1
      },
      {
        "key": "apex-nc|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "apex-nc|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "apex-nc|lot_coverage|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "apex-nc|permitted_uses|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "apex-nc|setbacks|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "apex-nc|height|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "apex-nc|lot_coverage|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "apex-nc|lot_size|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "apex-nc|lot_size|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "aubrey-tx|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "aubrey-tx|variance_process|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "aubrey-tx|setbacks|residential",
        "population": 6,
        "selected": 1
      },
      {
        "key": "aubrey-tx|height|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "aubrey-tx|lot_coverage|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "aubrey-tx|lot_size|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "aubrey-tx|setbacks|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "aubrey-tx|height|commercial",
        "population": 3,
        "selected": 1
      },
      {
        "key": "aubrey-tx|lot_coverage|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "aubrey-tx|lot_size|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "aubrey-tx|permitted_uses|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "aubrey-tx|setbacks|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "aubrey-tx|height|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "aubrey-tx|lot_coverage|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "aubrey-tx|lot_size|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "aubrey-tx|height|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "aubrey-tx|lot_size|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "aubrey-tx|setbacks|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "birmingham|height|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "birmingham|parking|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "birmingham|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "birmingham|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "birmingham|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "birmingham|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "birmingham|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "birmingham|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "birmingham|permitted_uses|commercial",
        "population": 6,
        "selected": 1
      },
      {
        "key": "birmingham|permitted_uses|mixed",
        "population": 6,
        "selected": 0
      },
      {
        "key": "birmingham|permitted_uses|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "birmingham|permitted_uses|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "birmingham|special_land_uses|residential",
        "population": 4,
        "selected": 1
      },
      {
        "key": "birmingham|setbacks|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "birmingham|height|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "birmingham|lot_coverage|residential",
        "population": 4,
        "selected": 0
      },
      {
        "key": "birmingham|lot_size|residential",
        "population": 6,
        "selected": 1
      },
      {
        "key": "buckeye-az|special_land_uses|special",
        "population": 4,
        "selected": 1
      },
      {
        "key": "buckeye-az|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "buckeye-az|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "buckeye-az|accessory_structures|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "buckeye-az|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "buckeye-az|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "buckeye-az|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "buckeye-az|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "buckeye-az|permitted_uses|residential",
        "population": 10,
        "selected": 1
      },
      {
        "key": "buckeye-az|setbacks|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "buckeye-az|height|residential",
        "population": 10,
        "selected": 1
      },
      {
        "key": "buckeye-az|lot_coverage|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "buckeye-az|lot_size|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "buckeye-az|permitted_uses|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "buckeye-az|setbacks|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "buckeye-az|height|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "buckeye-az|lot_size|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "buckeye-az|permitted_uses|special",
        "population": 8,
        "selected": 0
      },
      {
        "key": "buckeye-az|permitted_uses|mixed",
        "population": 6,
        "selected": 0
      },
      {
        "key": "buckeye-az|setbacks|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "buckeye-az|height|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "buckeye-az|lot_size|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "buckeye-az|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "buckeye-az|setbacks|industrial",
        "population": 2,
        "selected": 1
      },
      {
        "key": "buckeye-az|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "buckeye-az|lot_size|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "buda-tx|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "buda-tx|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "buda-tx|adu|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "buda-tx|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "buda-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "buda-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "buda-tx|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "buda-tx|permitted_uses|residential",
        "population": 7,
        "selected": 1
      },
      {
        "key": "buda-tx|setbacks|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "buda-tx|height|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "buda-tx|lot_coverage|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "buda-tx|lot_size|residential",
        "population": 7,
        "selected": 1
      },
      {
        "key": "buda-tx|permitted_uses|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "buda-tx|setbacks|commercial",
        "population": 3,
        "selected": 2
      },
      {
        "key": "buda-tx|height|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "buda-tx|lot_coverage|commercial",
        "population": 3,
        "selected": 1
      },
      {
        "key": "buda-tx|parking|commercial",
        "population": 3,
        "selected": 1
      },
      {
        "key": "buda-tx|permitted_uses|special",
        "population": 6,
        "selected": 1
      },
      {
        "key": "buda-tx|height|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "buda-tx|permitted_uses|mixed",
        "population": 6,
        "selected": 1
      },
      {
        "key": "buda-tx|height|mixed",
        "population": 6,
        "selected": 1
      },
      {
        "key": "buda-tx|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "buda-tx|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "buda-tx|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "buda-tx|lot_coverage|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "buda-tx|parking|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "buda-tx|setbacks|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "canton-township|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "canton-township|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "canton-township|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "canton-township|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "canton-township|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "canton-township|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "canton-township|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "canton-township|permitted_uses|commercial",
        "population": 5,
        "selected": 1
      },
      {
        "key": "canton-township|special_land_uses|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "canton-township|setbacks|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "canton-township|height|commercial",
        "population": 5,
        "selected": 1
      },
      {
        "key": "canton-township|lot_coverage|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "canton-township|parking|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "canton-township|permitted_uses|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "canton-township|special_land_uses|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "canton-township|setbacks|industrial",
        "population": 3,
        "selected": 1
      },
      {
        "key": "canton-township|height|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "canton-township|parking|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "canton-township|permitted_uses|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "canton-township|special_land_uses|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "canton-township|setbacks|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "canton-township|height|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "canton-township|lot_size|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "canton-township|lot_size|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "canton-township|permitted_uses|residential",
        "population": 11,
        "selected": 1
      },
      {
        "key": "canton-township|special_land_uses|residential",
        "population": 11,
        "selected": 0
      },
      {
        "key": "canton-township|setbacks|residential",
        "population": 11,
        "selected": 1
      },
      {
        "key": "canton-township|height|residential",
        "population": 11,
        "selected": 1
      },
      {
        "key": "canton-township|lot_size|residential",
        "population": 11,
        "selected": 1
      },
      {
        "key": "canton-township|parking|residential",
        "population": 1,
        "selected": 0
      },
      {
        "key": "canton-township|permitted_uses|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "canton-township|setbacks|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "canton-township|lot_coverage|residential",
        "population": 8,
        "selected": 1
      },
      {
        "key": "canton-township|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "canton-township|lot_size|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|permitted_uses|residential",
        "population": 5,
        "selected": 1
      },
      {
        "key": "cape-coral-fl|setbacks|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|height|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|lot_coverage|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|lot_size|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|permitted_uses|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|setbacks|commercial",
        "population": 2,
        "selected": 1
      },
      {
        "key": "cape-coral-fl|height|commercial",
        "population": 2,
        "selected": 1
      },
      {
        "key": "cape-coral-fl|lot_coverage|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|lot_size|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|permitted_uses|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|setbacks|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|height|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|lot_coverage|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|lot_size|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|permitted_uses|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|setbacks|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|height|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|lot_coverage|industrial",
        "population": 1,
        "selected": 1
      },
      {
        "key": "cape-coral-fl|lot_size|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|permitted_uses|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|setbacks|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|height|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|lot_coverage|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|lot_size|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "cape-coral-fl|accessory_structures|residential",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|parking|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|permitted_uses|special",
        "population": 8,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|setbacks|special",
        "population": 6,
        "selected": 2
      },
      {
        "key": "cedar-park-tx|height|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|lot_coverage|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|lot_size|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|permitted_uses|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|setbacks|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|height|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|lot_coverage|residential",
        "population": 5,
        "selected": 1
      },
      {
        "key": "cedar-park-tx|lot_size|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|permitted_uses|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|setbacks|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|height|commercial",
        "population": 5,
        "selected": 1
      },
      {
        "key": "cedar-park-tx|lot_size|commercial",
        "population": 5,
        "selected": 1
      },
      {
        "key": "cedar-park-tx|parking|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|signs|commercial",
        "population": 4,
        "selected": 2
      },
      {
        "key": "cedar-park-tx|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|parking|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|permitted_uses|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|setbacks|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|height|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|lot_size|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "cedar-park-tx|parking|mixed",
        "population": 1,
        "selected": 1
      },
      {
        "key": "cedar-park-tx|signs|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "celina-tx|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "celina-tx|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "celina-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "celina-tx|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "celina-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "celina-tx|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "celina-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "celina-tx|variance_process|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "celina-tx|permitted_uses|residential",
        "population": 9,
        "selected": 1
      },
      {
        "key": "celina-tx|setbacks|residential",
        "population": 9,
        "selected": 1
      },
      {
        "key": "celina-tx|height|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "celina-tx|lot_size|residential",
        "population": 8,
        "selected": 1
      },
      {
        "key": "celina-tx|permitted_uses|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "celina-tx|setbacks|commercial",
        "population": 1,
        "selected": 1
      },
      {
        "key": "celina-tx|height|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "celina-tx|lot_size|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "celina-tx|parking|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "celina-tx|signs|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "celina-tx|permitted_uses|special",
        "population": 5,
        "selected": 1
      },
      {
        "key": "celina-tx|setbacks|special",
        "population": 5,
        "selected": 0
      },
      {
        "key": "celina-tx|height|special",
        "population": 3,
        "selected": 1
      },
      {
        "key": "celina-tx|permitted_uses|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "celina-tx|setbacks|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "celina-tx|height|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "celina-tx|lot_size|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "celina-tx|lot_coverage|residential",
        "population": 6,
        "selected": 1
      },
      {
        "key": "celina-tx|parking|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "celina-tx|permitted_uses|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "celina-tx|setbacks|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "celina-tx|height|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "columbia-tn|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "columbia-tn|adu|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "columbia-tn|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "columbia-tn|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "columbia-tn|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "columbia-tn|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "columbia-tn|permitted_uses|residential",
        "population": 4,
        "selected": 0
      },
      {
        "key": "columbia-tn|setbacks|residential",
        "population": 4,
        "selected": 0
      },
      {
        "key": "columbia-tn|height|residential",
        "population": 4,
        "selected": 0
      },
      {
        "key": "columbia-tn|lot_coverage|residential",
        "population": 4,
        "selected": 1
      },
      {
        "key": "columbia-tn|lot_size|residential",
        "population": 4,
        "selected": 0
      },
      {
        "key": "columbia-tn|permitted_uses|mixed",
        "population": 4,
        "selected": 0
      },
      {
        "key": "columbia-tn|setbacks|mixed",
        "population": 4,
        "selected": 0
      },
      {
        "key": "columbia-tn|height|mixed",
        "population": 4,
        "selected": 0
      },
      {
        "key": "columbia-tn|lot_coverage|mixed",
        "population": 4,
        "selected": 0
      },
      {
        "key": "columbia-tn|parking|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "columbia-tn|signs|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "columbia-tn|permitted_uses|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "columbia-tn|setbacks|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "columbia-tn|height|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "columbia-tn|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "columbia-tn|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "columbia-tn|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "columbia-tn|parking|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "columbia-tn|permitted_uses|commercial",
        "population": 1,
        "selected": 1
      },
      {
        "key": "columbia-tn|setbacks|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "columbia-tn|height|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "columbia-tn|parking|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "columbia-tn|signs|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "concord-nc|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "concord-nc|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "concord-nc|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "concord-nc|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "concord-nc|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "concord-nc|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "concord-nc|home_occupation|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "concord-nc|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "concord-nc|permitted_uses|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "concord-nc|setbacks|residential",
        "population": 8,
        "selected": 2
      },
      {
        "key": "concord-nc|height|residential",
        "population": 8,
        "selected": 0
      },
      {
        "key": "concord-nc|lot_coverage|residential",
        "population": 8,
        "selected": 0
      },
      {
        "key": "concord-nc|lot_size|residential",
        "population": 8,
        "selected": 0
      },
      {
        "key": "concord-nc|permitted_uses|special",
        "population": 9,
        "selected": 0
      },
      {
        "key": "concord-nc|permitted_uses|commercial",
        "population": 4,
        "selected": 1
      },
      {
        "key": "concord-nc|setbacks|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "concord-nc|height|commercial",
        "population": 4,
        "selected": 1
      },
      {
        "key": "concord-nc|lot_coverage|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "concord-nc|lot_size|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "concord-nc|permitted_uses|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "concord-nc|setbacks|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "concord-nc|height|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "concord-nc|lot_coverage|mixed",
        "population": 1,
        "selected": 1
      },
      {
        "key": "concord-nc|lot_size|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "concord-nc|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "concord-nc|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "concord-nc|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "concord-nc|lot_coverage|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "concord-nc|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "fate-tx|permitted_uses|special",
        "population": 4,
        "selected": 0
      },
      {
        "key": "fate-tx|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "fate-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "fate-tx|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "fate-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "fate-tx|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "fate-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "fate-tx|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "fate-tx|permitted_uses|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "fate-tx|setbacks|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "fate-tx|height|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "fate-tx|lot_coverage|residential",
        "population": 7,
        "selected": 1
      },
      {
        "key": "fate-tx|lot_size|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "fate-tx|permitted_uses|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "fate-tx|setbacks|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "fate-tx|height|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "fate-tx|lot_coverage|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "fate-tx|lot_size|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "fate-tx|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "fate-tx|setbacks|industrial",
        "population": 2,
        "selected": 1
      },
      {
        "key": "fate-tx|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "fate-tx|lot_coverage|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "fate-tx|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "fate-tx|setbacks|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "fate-tx|height|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "fate-tx|lot_coverage|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "fate-tx|lot_size|special",
        "population": 3,
        "selected": 1
      },
      {
        "key": "fate-tx|permitted_uses|mixed",
        "population": 4,
        "selected": 1
      },
      {
        "key": "fate-tx|setbacks|mixed",
        "population": 4,
        "selected": 0
      },
      {
        "key": "fate-tx|height|mixed",
        "population": 4,
        "selected": 1
      },
      {
        "key": "fate-tx|lot_coverage|mixed",
        "population": 4,
        "selected": 0
      },
      {
        "key": "fate-tx|lot_size|mixed",
        "population": 4,
        "selected": 0
      },
      {
        "key": "ferndale|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "ferndale|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "ferndale|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "ferndale|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "ferndale|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "ferndale|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "ferndale|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "ferndale|permitted_uses|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "ferndale|setbacks|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "ferndale|height|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "ferndale|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "ferndale|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "ferndale|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "ferndale|permitted_uses|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "ferndale|setbacks|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "ferndale|height|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "ferndale|permitted_uses|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "ferndale|permitted_uses|residential",
        "population": 2,
        "selected": 0
      },
      {
        "key": "ferndale|special_land_uses|residential",
        "population": 2,
        "selected": 0
      },
      {
        "key": "ferndale|setbacks|residential",
        "population": 2,
        "selected": 0
      },
      {
        "key": "ferndale|height|residential",
        "population": 2,
        "selected": 0
      },
      {
        "key": "ferndale|lot_coverage|residential",
        "population": 2,
        "selected": 0
      },
      {
        "key": "ferndale|lot_size|residential",
        "population": 2,
        "selected": 0
      },
      {
        "key": "forney-tx|special_land_uses|special",
        "population": 7,
        "selected": 2
      },
      {
        "key": "forney-tx|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "forney-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "forney-tx|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "forney-tx|fences|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "forney-tx|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "forney-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "forney-tx|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "forney-tx|permitted_uses|residential",
        "population": 12,
        "selected": 1
      },
      {
        "key": "forney-tx|setbacks|residential",
        "population": 12,
        "selected": 0
      },
      {
        "key": "forney-tx|height|residential",
        "population": 12,
        "selected": 1
      },
      {
        "key": "forney-tx|lot_coverage|residential",
        "population": 12,
        "selected": 2
      },
      {
        "key": "forney-tx|lot_size|residential",
        "population": 12,
        "selected": 0
      },
      {
        "key": "forney-tx|permitted_uses|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "forney-tx|setbacks|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "forney-tx|height|commercial",
        "population": 5,
        "selected": 1
      },
      {
        "key": "forney-tx|lot_coverage|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "forney-tx|lot_size|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "forney-tx|parking|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "forney-tx|permitted_uses|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "forney-tx|setbacks|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "forney-tx|height|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "forney-tx|lot_coverage|industrial",
        "population": 1,
        "selected": 1
      },
      {
        "key": "forney-tx|lot_size|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "forney-tx|parking|residential",
        "population": 2,
        "selected": 0
      },
      {
        "key": "forney-tx|permitted_uses|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "forney-tx|setbacks|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "forney-tx|height|mixed",
        "population": 1,
        "selected": 1
      },
      {
        "key": "forney-tx|lot_coverage|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "forney-tx|lot_size|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "franklin-tn|parking|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "franklin-tn|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "franklin-tn|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "franklin-tn|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "franklin-tn|signs|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "franklin-tn|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "franklin-tn|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "franklin-tn|permitted_uses|mixed",
        "population": 4,
        "selected": 0
      },
      {
        "key": "franklin-tn|special_land_uses|mixed",
        "population": 4,
        "selected": 2
      },
      {
        "key": "franklin-tn|setbacks|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "franklin-tn|height|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "franklin-tn|lot_coverage|mixed",
        "population": 3,
        "selected": 1
      },
      {
        "key": "franklin-tn|lot_size|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "franklin-tn|permitted_uses|commercial",
        "population": 8,
        "selected": 0
      },
      {
        "key": "franklin-tn|special_land_uses|commercial",
        "population": 8,
        "selected": 2
      },
      {
        "key": "franklin-tn|setbacks|commercial",
        "population": 8,
        "selected": 0
      },
      {
        "key": "franklin-tn|height|commercial",
        "population": 8,
        "selected": 0
      },
      {
        "key": "franklin-tn|lot_coverage|commercial",
        "population": 8,
        "selected": 1
      },
      {
        "key": "franklin-tn|lot_size|commercial",
        "population": 8,
        "selected": 1
      },
      {
        "key": "franklin-tn|permitted_uses|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "franklin-tn|special_land_uses|residential",
        "population": 7,
        "selected": 1
      },
      {
        "key": "franklin-tn|setbacks|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "franklin-tn|height|residential",
        "population": 7,
        "selected": 1
      },
      {
        "key": "franklin-tn|lot_coverage|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "franklin-tn|lot_size|residential",
        "population": 7,
        "selected": 1
      },
      {
        "key": "franklin-tn|permitted_uses|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "franklin-tn|setbacks|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "franklin-tn|height|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "franklin-tn|lot_coverage|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "franklin-tn|lot_size|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "franklin-tn|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "franklin-tn|special_land_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "franklin-tn|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "franklin-tn|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "franklin-tn|lot_coverage|industrial",
        "population": 2,
        "selected": 1
      },
      {
        "key": "franklin-tn|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "frisco-tx|permitted_uses|special",
        "population": 2,
        "selected": 1
      },
      {
        "key": "frisco-tx|special_land_uses|special",
        "population": 2,
        "selected": 1
      },
      {
        "key": "frisco-tx|height|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "frisco-tx|lot_coverage|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "frisco-tx|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "frisco-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "frisco-tx|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "frisco-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "frisco-tx|signs|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "frisco-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "frisco-tx|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "frisco-tx|lot_size|residential",
        "population": 9,
        "selected": 1
      },
      {
        "key": "frisco-tx|lot_size|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "frisco-tx|lot_size|industrial",
        "population": 2,
        "selected": 2
      },
      {
        "key": "frisco-tx|accessory_structures|residential",
        "population": 1,
        "selected": 0
      },
      {
        "key": "frisco-tx|height|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "frisco-tx|parking|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "frisco-tx|setbacks|residential",
        "population": 2,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|adu|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "fuquay-varina-nc|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|permitted_uses|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|height|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|permitted_uses|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|setbacks|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|lot_size|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|permitted_uses|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|permitted_uses|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|setbacks|residential",
        "population": 4,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|height|residential",
        "population": 4,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|lot_size|residential",
        "population": 4,
        "selected": 1
      },
      {
        "key": "fuquay-varina-nc|setbacks|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|height|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "fuquay-varina-nc|lot_size|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "gallatin-tn|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "gallatin-tn|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "gallatin-tn|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "gallatin-tn|signs|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "gallatin-tn|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "gallatin-tn|permitted_uses|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "gallatin-tn|setbacks|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "gallatin-tn|height|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "gallatin-tn|lot_coverage|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "gallatin-tn|lot_size|residential",
        "population": 7,
        "selected": 1
      },
      {
        "key": "gallatin-tn|permitted_uses|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "gallatin-tn|setbacks|commercial",
        "population": 6,
        "selected": 1
      },
      {
        "key": "gallatin-tn|height|commercial",
        "population": 6,
        "selected": 1
      },
      {
        "key": "gallatin-tn|lot_coverage|commercial",
        "population": 6,
        "selected": 2
      },
      {
        "key": "gallatin-tn|lot_size|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "gallatin-tn|permitted_uses|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "gallatin-tn|setbacks|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "gallatin-tn|height|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "gallatin-tn|lot_coverage|industrial",
        "population": 3,
        "selected": 1
      },
      {
        "key": "gallatin-tn|lot_size|industrial",
        "population": 3,
        "selected": 1
      },
      {
        "key": "gallatin-tn|permitted_uses|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "gallatin-tn|setbacks|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "gallatin-tn|height|mixed",
        "population": 5,
        "selected": 2
      },
      {
        "key": "gallatin-tn|lot_coverage|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "gallatin-tn|lot_size|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "gallatin-tn|permitted_uses|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "gallatin-tn|setbacks|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "georgetown-tx|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "georgetown-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "georgetown-tx|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "georgetown-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "georgetown-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "georgetown-tx|variance_process|special",
        "population": 2,
        "selected": 1
      },
      {
        "key": "georgetown-tx|permitted_uses|special",
        "population": 4,
        "selected": 1
      },
      {
        "key": "georgetown-tx|setbacks|special",
        "population": 4,
        "selected": 1
      },
      {
        "key": "georgetown-tx|height|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "georgetown-tx|lot_coverage|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "georgetown-tx|lot_size|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "georgetown-tx|parking|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "georgetown-tx|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "georgetown-tx|permitted_uses|commercial",
        "population": 4,
        "selected": 1
      },
      {
        "key": "georgetown-tx|setbacks|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "georgetown-tx|height|commercial",
        "population": 4,
        "selected": 1
      },
      {
        "key": "georgetown-tx|parking|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "georgetown-tx|signs|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "georgetown-tx|permitted_uses|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "georgetown-tx|setbacks|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "georgetown-tx|height|industrial",
        "population": 1,
        "selected": 1
      },
      {
        "key": "georgetown-tx|parking|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "georgetown-tx|permitted_uses|residential",
        "population": 8,
        "selected": 1
      },
      {
        "key": "georgetown-tx|setbacks|residential",
        "population": 8,
        "selected": 1
      },
      {
        "key": "georgetown-tx|height|residential",
        "population": 8,
        "selected": 1
      },
      {
        "key": "georgetown-tx|lot_coverage|residential",
        "population": 8,
        "selected": 1
      },
      {
        "key": "georgetown-tx|lot_size|residential",
        "population": 8,
        "selected": 0
      },
      {
        "key": "georgetown-tx|permitted_uses|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "georgetown-tx|setbacks|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "georgetown-tx|height|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "georgetown-tx|parking|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "georgetown-tx|signs|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "goodyear-az|special_land_uses|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "goodyear-az|height|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "goodyear-az|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "goodyear-az|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "goodyear-az|accessory_structures|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "goodyear-az|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "goodyear-az|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "goodyear-az|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "goodyear-az|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "goodyear-az|permitted_uses|residential",
        "population": 14,
        "selected": 2
      },
      {
        "key": "goodyear-az|setbacks|residential",
        "population": 14,
        "selected": 1
      },
      {
        "key": "goodyear-az|height|residential",
        "population": 14,
        "selected": 1
      },
      {
        "key": "goodyear-az|lot_size|residential",
        "population": 14,
        "selected": 0
      },
      {
        "key": "goodyear-az|accessory_structures|residential",
        "population": 1,
        "selected": 0
      },
      {
        "key": "goodyear-az|permitted_uses|commercial",
        "population": 5,
        "selected": 1
      },
      {
        "key": "goodyear-az|setbacks|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "goodyear-az|height|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "goodyear-az|lot_size|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "goodyear-az|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "goodyear-az|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "goodyear-az|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "goodyear-az|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "goodyear-az|permitted_uses|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "goodyear-az|setbacks|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "goodyear-az|lot_size|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|permitted_uses|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|setbacks|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|height|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|lot_coverage|mixed",
        "population": 3,
        "selected": 1
      },
      {
        "key": "hendersonville-tn|lot_size|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|permitted_uses|residential",
        "population": 8,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|setbacks|residential",
        "population": 8,
        "selected": 1
      },
      {
        "key": "hendersonville-tn|height|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|lot_coverage|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|lot_size|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|permitted_uses|commercial",
        "population": 4,
        "selected": 1
      },
      {
        "key": "hendersonville-tn|setbacks|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|height|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|lot_coverage|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|lot_size|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|permitted_uses|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|setbacks|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|height|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|lot_coverage|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|lot_size|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|permitted_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "hendersonville-tn|setbacks|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|height|industrial",
        "population": 2,
        "selected": 1
      },
      {
        "key": "holly-springs-nc|lot_coverage|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|parking|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|permitted_uses|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|setbacks|commercial",
        "population": 1,
        "selected": 1
      },
      {
        "key": "holly-springs-nc|height|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|lot_coverage|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|lot_size|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|parking|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|permitted_uses|mixed",
        "population": 4,
        "selected": 1
      },
      {
        "key": "holly-springs-nc|setbacks|mixed",
        "population": 4,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|height|mixed",
        "population": 4,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|lot_coverage|mixed",
        "population": 4,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|lot_size|mixed",
        "population": 4,
        "selected": 1
      },
      {
        "key": "holly-springs-nc|parking|mixed",
        "population": 4,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|permitted_uses|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|setbacks|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|height|residential",
        "population": 5,
        "selected": 1
      },
      {
        "key": "holly-springs-nc|lot_coverage|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|lot_size|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|parking|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|permitted_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|setbacks|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|height|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "holly-springs-nc|lot_size|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "huntersville-nc|permitted_uses|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "huntersville-nc|permitted_uses|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "huntersville-nc|setbacks|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "huntersville-nc|permitted_uses|residential",
        "population": 4,
        "selected": 1
      },
      {
        "key": "huntersville-nc|lot_size|residential",
        "population": 4,
        "selected": 0
      },
      {
        "key": "huntersville-nc|permitted_uses|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "huntersville-nc|setbacks|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "huntersville-nc|height|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "huntersville-nc|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "huntersville-nc|permitted_uses|mixed",
        "population": 6,
        "selected": 0
      },
      {
        "key": "huntersville-nc|setbacks|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "huntersville-nc|height|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "huntersville-nc|lot_size|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "huntersville-nc|setbacks|residential",
        "population": 1,
        "selected": 0
      },
      {
        "key": "huntersville-nc|height|residential",
        "population": 2,
        "selected": 0
      },
      {
        "key": "hutto-tx|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "hutto-tx|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "hutto-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "hutto-tx|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "hutto-tx|fences|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "hutto-tx|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "hutto-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "hutto-tx|variance_process|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "hutto-tx|permitted_uses|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "hutto-tx|setbacks|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "hutto-tx|height|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "hutto-tx|parking|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "hutto-tx|signs|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "hutto-tx|permitted_uses|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "hutto-tx|setbacks|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "hutto-tx|height|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "hutto-tx|lot_coverage|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "hutto-tx|permitted_uses|special",
        "population": 4,
        "selected": 1
      },
      {
        "key": "hutto-tx|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "hutto-tx|setbacks|industrial",
        "population": 2,
        "selected": 1
      },
      {
        "key": "hutto-tx|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "hutto-tx|parking|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "hutto-tx|permitted_uses|residential",
        "population": 5,
        "selected": 1
      },
      {
        "key": "hutto-tx|setbacks|residential",
        "population": 5,
        "selected": 2
      },
      {
        "key": "hutto-tx|height|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "hutto-tx|lot_coverage|residential",
        "population": 4,
        "selected": 0
      },
      {
        "key": "hutto-tx|lot_size|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "hutto-tx|parking|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "hutto-tx|signs|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "hutto-tx|setbacks|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|accessory_structures|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "indian-trail-nc|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|home_occupation|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "indian-trail-nc|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|permitted_uses|special",
        "population": 6,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|permitted_uses|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|setbacks|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|height|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|lot_size|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|permitted_uses|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|setbacks|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|height|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|lot_size|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|setbacks|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|height|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|lot_size|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|permitted_uses|residential",
        "population": 7,
        "selected": 1
      },
      {
        "key": "indian-trail-nc|setbacks|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|height|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|lot_coverage|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "indian-trail-nc|lot_size|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "kyle-tx|special_land_uses|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "kyle-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "kyle-tx|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "kyle-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "kyle-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "kyle-tx|variance_process|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "kyle-tx|permitted_uses|residential",
        "population": 16,
        "selected": 2
      },
      {
        "key": "kyle-tx|setbacks|residential",
        "population": 16,
        "selected": 1
      },
      {
        "key": "kyle-tx|height|residential",
        "population": 16,
        "selected": 1
      },
      {
        "key": "kyle-tx|lot_coverage|residential",
        "population": 16,
        "selected": 0
      },
      {
        "key": "kyle-tx|lot_size|residential",
        "population": 16,
        "selected": 0
      },
      {
        "key": "kyle-tx|permitted_uses|special",
        "population": 6,
        "selected": 0
      },
      {
        "key": "kyle-tx|setbacks|special",
        "population": 4,
        "selected": 0
      },
      {
        "key": "kyle-tx|height|special",
        "population": 2,
        "selected": 1
      },
      {
        "key": "kyle-tx|signs|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "kyle-tx|permitted_uses|commercial",
        "population": 8,
        "selected": 1
      },
      {
        "key": "kyle-tx|setbacks|commercial",
        "population": 8,
        "selected": 1
      },
      {
        "key": "kyle-tx|height|commercial",
        "population": 8,
        "selected": 0
      },
      {
        "key": "kyle-tx|parking|commercial",
        "population": 8,
        "selected": 0
      },
      {
        "key": "kyle-tx|signs|commercial",
        "population": 8,
        "selected": 0
      },
      {
        "key": "kyle-tx|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "kyle-tx|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "kyle-tx|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "kyle-tx|parking|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "kyle-tx|signs|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "kyle-tx|permitted_uses|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "kyle-tx|setbacks|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "kyle-tx|height|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "kyle-tx|parking|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "kyle-tx|signs|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "kyle-tx|lot_size|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "kyle-tx|parking|special",
        "population": 2,
        "selected": 1
      },
      {
        "key": "leander-tx|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "leander-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "leander-tx|accessory_structures|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "leander-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "leander-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "leander-tx|variance_process|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "leander-tx|permitted_uses|residential",
        "population": 13,
        "selected": 1
      },
      {
        "key": "leander-tx|setbacks|residential",
        "population": 13,
        "selected": 0
      },
      {
        "key": "leander-tx|height|residential",
        "population": 13,
        "selected": 0
      },
      {
        "key": "leander-tx|lot_coverage|residential",
        "population": 13,
        "selected": 0
      },
      {
        "key": "leander-tx|lot_size|residential",
        "population": 13,
        "selected": 0
      },
      {
        "key": "leander-tx|permitted_uses|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "leander-tx|setbacks|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "leander-tx|height|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "leander-tx|parking|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "leander-tx|signs|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "leander-tx|permitted_uses|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "leander-tx|setbacks|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "leander-tx|height|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "leander-tx|parking|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "leander-tx|signs|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "leander-tx|permitted_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "leander-tx|setbacks|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "leander-tx|permitted_uses|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "leander-tx|setbacks|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "leander-tx|height|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "leander-tx|parking|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "leander-tx|signs|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "lebanon-tn|special_land_uses|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "lebanon-tn|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "lebanon-tn|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "lebanon-tn|accessory_structures|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "lebanon-tn|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "lebanon-tn|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "lebanon-tn|permitted_uses|commercial",
        "population": 4,
        "selected": 1
      },
      {
        "key": "lebanon-tn|setbacks|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "lebanon-tn|height|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "lebanon-tn|lot_coverage|commercial",
        "population": 4,
        "selected": 1
      },
      {
        "key": "lebanon-tn|lot_size|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "lebanon-tn|permitted_uses|mixed",
        "population": 5,
        "selected": 1
      },
      {
        "key": "lebanon-tn|setbacks|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "lebanon-tn|height|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "lebanon-tn|lot_coverage|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "lebanon-tn|lot_size|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "lebanon-tn|permitted_uses|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "lebanon-tn|setbacks|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "lebanon-tn|height|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "lebanon-tn|lot_coverage|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "lebanon-tn|lot_size|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "lebanon-tn|permitted_uses|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "lebanon-tn|setbacks|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "lebanon-tn|permitted_uses|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "lebanon-tn|setbacks|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "lebanon-tn|height|residential",
        "population": 9,
        "selected": 1
      },
      {
        "key": "lebanon-tn|lot_coverage|residential",
        "population": 9,
        "selected": 3
      },
      {
        "key": "lebanon-tn|lot_size|residential",
        "population": 9,
        "selected": 1
      },
      {
        "key": "little-elm-tx|special_land_uses|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "little-elm-tx|setbacks|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "little-elm-tx|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "little-elm-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "little-elm-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "little-elm-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "little-elm-tx|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "little-elm-tx|permitted_uses|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "little-elm-tx|height|special",
        "population": 3,
        "selected": 1
      },
      {
        "key": "little-elm-tx|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "little-elm-tx|permitted_uses|residential",
        "population": 14,
        "selected": 0
      },
      {
        "key": "little-elm-tx|setbacks|residential",
        "population": 14,
        "selected": 0
      },
      {
        "key": "little-elm-tx|height|residential",
        "population": 14,
        "selected": 1
      },
      {
        "key": "little-elm-tx|lot_size|residential",
        "population": 14,
        "selected": 0
      },
      {
        "key": "little-elm-tx|parking|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "little-elm-tx|lot_size|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "little-elm-tx|permitted_uses|commercial",
        "population": 4,
        "selected": 1
      },
      {
        "key": "little-elm-tx|setbacks|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "little-elm-tx|height|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "little-elm-tx|lot_size|commercial",
        "population": 4,
        "selected": 1
      },
      {
        "key": "little-elm-tx|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "little-elm-tx|setbacks|industrial",
        "population": 2,
        "selected": 2
      },
      {
        "key": "little-elm-tx|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "little-elm-tx|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "little-elm-tx|permitted_uses|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "little-elm-tx|setbacks|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "little-elm-tx|height|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "little-elm-tx|signs|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "little-elm-tx|special_land_uses|residential",
        "population": 1,
        "selected": 0
      },
      {
        "key": "little-elm-tx|lot_coverage|residential",
        "population": 1,
        "selected": 0
      },
      {
        "key": "macomb-township|setbacks|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "macomb-township|height|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "macomb-township|lot_size|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "macomb-township|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "macomb-township|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "macomb-township|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "macomb-township|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "macomb-township|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "macomb-township|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "macomb-township|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "macomb-township|permitted_uses|residential",
        "population": 8,
        "selected": 0
      },
      {
        "key": "macomb-township|special_land_uses|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "macomb-township|setbacks|residential",
        "population": 8,
        "selected": 0
      },
      {
        "key": "macomb-township|height|residential",
        "population": 8,
        "selected": 0
      },
      {
        "key": "macomb-township|lot_coverage|residential",
        "population": 7,
        "selected": 2
      },
      {
        "key": "macomb-township|lot_size|residential",
        "population": 8,
        "selected": 0
      },
      {
        "key": "macomb-township|permitted_uses|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "macomb-township|special_land_uses|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "macomb-township|setbacks|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "macomb-township|height|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "macomb-township|lot_coverage|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "macomb-township|lot_size|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "macomb-township|parking|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "macomb-township|permitted_uses|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "macomb-township|special_land_uses|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "macomb-township|lot_coverage|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "macomb-township|permitted_uses|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "macomb-township|setbacks|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "macomb-township|height|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "macomb-township|lot_size|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "macomb-township|permitted_uses|industrial",
        "population": 4,
        "selected": 1
      },
      {
        "key": "macomb-township|special_land_uses|industrial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "macomb-township|setbacks|industrial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "macomb-township|height|industrial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "macomb-township|lot_coverage|industrial",
        "population": 4,
        "selected": 1
      },
      {
        "key": "macomb-township|lot_size|industrial",
        "population": 4,
        "selected": 1
      },
      {
        "key": "macomb-township|parking|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "macomb-township|parking|residential",
        "population": 4,
        "selected": 0
      },
      {
        "key": "maricopa-az|special_land_uses|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "maricopa-az|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "maricopa-az|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "maricopa-az|accessory_structures|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "maricopa-az|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "maricopa-az|signs|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "maricopa-az|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "maricopa-az|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "maricopa-az|permitted_uses|special",
        "population": 5,
        "selected": 1
      },
      {
        "key": "maricopa-az|permitted_uses|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "maricopa-az|setbacks|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "maricopa-az|height|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "maricopa-az|lot_size|commercial",
        "population": 4,
        "selected": 1
      },
      {
        "key": "maricopa-az|permitted_uses|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "maricopa-az|setbacks|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "maricopa-az|height|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "maricopa-az|lot_size|industrial",
        "population": 3,
        "selected": 1
      },
      {
        "key": "maricopa-az|permitted_uses|residential",
        "population": 9,
        "selected": 1
      },
      {
        "key": "maricopa-az|setbacks|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "maricopa-az|height|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "maricopa-az|lot_size|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "maricopa-az|permitted_uses|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "maricopa-az|setbacks|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "maricopa-az|height|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "maricopa-az|lot_size|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "maricopa-az|signs|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "maricopa-az|lot_coverage|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "mckinney-tx|special_land_uses|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "mckinney-tx|setbacks|special",
        "population": 5,
        "selected": 0
      },
      {
        "key": "mckinney-tx|height|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "mckinney-tx|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mckinney-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mckinney-tx|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mckinney-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mckinney-tx|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mckinney-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mckinney-tx|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mckinney-tx|permitted_uses|residential",
        "population": 11,
        "selected": 0
      },
      {
        "key": "mckinney-tx|setbacks|residential",
        "population": 11,
        "selected": 0
      },
      {
        "key": "mckinney-tx|height|residential",
        "population": 11,
        "selected": 0
      },
      {
        "key": "mckinney-tx|lot_size|residential",
        "population": 11,
        "selected": 1
      },
      {
        "key": "mckinney-tx|permitted_uses|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "mckinney-tx|lot_size|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "mckinney-tx|permitted_uses|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "mckinney-tx|setbacks|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "mckinney-tx|height|commercial",
        "population": 5,
        "selected": 1
      },
      {
        "key": "mckinney-tx|lot_size|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "mckinney-tx|parking|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mckinney-tx|signs|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mckinney-tx|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "mckinney-tx|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "mckinney-tx|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "mckinney-tx|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "mckinney-tx|permitted_uses|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mckinney-tx|parking|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "mckinney-tx|lot_coverage|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "melissa-tx|special_land_uses|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "melissa-tx|parking|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "melissa-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "melissa-tx|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "melissa-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "melissa-tx|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "melissa-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "melissa-tx|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "melissa-tx|permitted_uses|residential",
        "population": 7,
        "selected": 1
      },
      {
        "key": "melissa-tx|setbacks|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "melissa-tx|height|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "melissa-tx|lot_coverage|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "melissa-tx|lot_size|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "melissa-tx|permitted_uses|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "melissa-tx|setbacks|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "melissa-tx|height|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "melissa-tx|lot_coverage|commercial",
        "population": 2,
        "selected": 1
      },
      {
        "key": "melissa-tx|lot_size|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "melissa-tx|signs|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "melissa-tx|parking|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "melissa-tx|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "melissa-tx|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "melissa-tx|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "melissa-tx|lot_coverage|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "melissa-tx|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "melissa-tx|permitted_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "melissa-tx|setbacks|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "melissa-tx|height|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "melissa-tx|lot_coverage|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "melissa-tx|lot_size|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "miramar-fl|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "miramar-fl|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "miramar-fl|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "miramar-fl|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "miramar-fl|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "miramar-fl|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "miramar-fl|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "miramar-fl|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "miramar-fl|permitted_uses|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "miramar-fl|setbacks|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "miramar-fl|height|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "miramar-fl|lot_coverage|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "miramar-fl|lot_size|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "miramar-fl|permitted_uses|special",
        "population": 6,
        "selected": 1
      },
      {
        "key": "miramar-fl|setbacks|special",
        "population": 6,
        "selected": 0
      },
      {
        "key": "miramar-fl|height|special",
        "population": 5,
        "selected": 0
      },
      {
        "key": "miramar-fl|lot_coverage|special",
        "population": 4,
        "selected": 0
      },
      {
        "key": "miramar-fl|lot_size|special",
        "population": 5,
        "selected": 0
      },
      {
        "key": "miramar-fl|permitted_uses|residential",
        "population": 17,
        "selected": 2
      },
      {
        "key": "miramar-fl|setbacks|residential",
        "population": 17,
        "selected": 0
      },
      {
        "key": "miramar-fl|height|residential",
        "population": 17,
        "selected": 0
      },
      {
        "key": "miramar-fl|lot_coverage|residential",
        "population": 15,
        "selected": 2
      },
      {
        "key": "miramar-fl|lot_size|residential",
        "population": 17,
        "selected": 1
      },
      {
        "key": "miramar-fl|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "miramar-fl|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "miramar-fl|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "miramar-fl|lot_coverage|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "miramar-fl|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "miramar-fl|permitted_uses|mixed",
        "population": 5,
        "selected": 1
      },
      {
        "key": "miramar-fl|setbacks|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "miramar-fl|height|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "miramar-fl|lot_coverage|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "miramar-fl|lot_size|mixed",
        "population": 4,
        "selected": 1
      },
      {
        "key": "mooresville-nc|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mooresville-nc|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mooresville-nc|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mooresville-nc|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mooresville-nc|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mooresville-nc|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mooresville-nc|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mooresville-nc|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mooresville-nc|permitted_uses|special",
        "population": 6,
        "selected": 1
      },
      {
        "key": "mooresville-nc|setbacks|special",
        "population": 6,
        "selected": 1
      },
      {
        "key": "mooresville-nc|permitted_uses|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mooresville-nc|setbacks|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mooresville-nc|height|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mooresville-nc|lot_coverage|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mooresville-nc|lot_size|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mooresville-nc|permitted_uses|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "mooresville-nc|setbacks|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "mooresville-nc|height|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "mooresville-nc|lot_coverage|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "mooresville-nc|lot_size|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "mooresville-nc|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "mooresville-nc|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "mooresville-nc|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "mooresville-nc|lot_coverage|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "mooresville-nc|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "mooresville-nc|permitted_uses|residential",
        "population": 6,
        "selected": 1
      },
      {
        "key": "mooresville-nc|setbacks|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "mooresville-nc|height|residential",
        "population": 6,
        "selected": 1
      },
      {
        "key": "mooresville-nc|lot_coverage|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "mooresville-nc|lot_size|residential",
        "population": 6,
        "selected": 1
      },
      {
        "key": "mooresville-nc|height|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mooresville-nc|lot_coverage|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mooresville-nc|lot_size|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|permitted_uses|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|setbacks|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|height|residential",
        "population": 10,
        "selected": 2
      },
      {
        "key": "mount-juliet-tn|lot_coverage|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|lot_size|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|permitted_uses|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|setbacks|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|height|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|lot_coverage|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|lot_size|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|permitted_uses|special",
        "population": 17,
        "selected": 1
      },
      {
        "key": "mount-juliet-tn|setbacks|special",
        "population": 15,
        "selected": 1
      },
      {
        "key": "mount-juliet-tn|permitted_uses|mixed",
        "population": 4,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|setbacks|mixed",
        "population": 4,
        "selected": 1
      },
      {
        "key": "mount-juliet-tn|height|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|lot_coverage|mixed",
        "population": 2,
        "selected": 1
      },
      {
        "key": "mount-juliet-tn|lot_size|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "mount-juliet-tn|lot_coverage|industrial",
        "population": 2,
        "selected": 1
      },
      {
        "key": "mount-juliet-tn|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "murfreesboro-tn|permitted_uses|special",
        "population": 17,
        "selected": 1
      },
      {
        "key": "murfreesboro-tn|special_land_uses|special",
        "population": 3,
        "selected": 1
      },
      {
        "key": "murfreesboro-tn|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "murfreesboro-tn|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "murfreesboro-tn|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "murfreesboro-tn|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "murfreesboro-tn|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "murfreesboro-tn|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "murfreesboro-tn|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "murfreesboro-tn|permitted_uses|commercial",
        "population": 6,
        "selected": 1
      },
      {
        "key": "murfreesboro-tn|special_land_uses|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "murfreesboro-tn|setbacks|commercial",
        "population": 6,
        "selected": 1
      },
      {
        "key": "murfreesboro-tn|height|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "murfreesboro-tn|lot_coverage|commercial",
        "population": 6,
        "selected": 1
      },
      {
        "key": "murfreesboro-tn|lot_size|commercial",
        "population": 6,
        "selected": 1
      },
      {
        "key": "murfreesboro-tn|permitted_uses|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "murfreesboro-tn|special_land_uses|mixed",
        "population": 4,
        "selected": 0
      },
      {
        "key": "murfreesboro-tn|setbacks|mixed",
        "population": 5,
        "selected": 1
      },
      {
        "key": "murfreesboro-tn|height|mixed",
        "population": 4,
        "selected": 1
      },
      {
        "key": "murfreesboro-tn|lot_coverage|mixed",
        "population": 4,
        "selected": 0
      },
      {
        "key": "murfreesboro-tn|lot_size|mixed",
        "population": 4,
        "selected": 0
      },
      {
        "key": "murfreesboro-tn|setbacks|special",
        "population": 6,
        "selected": 1
      },
      {
        "key": "murfreesboro-tn|height|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "murfreesboro-tn|lot_coverage|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "murfreesboro-tn|lot_size|special",
        "population": 2,
        "selected": 1
      },
      {
        "key": "murfreesboro-tn|permitted_uses|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "murfreesboro-tn|special_land_uses|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "murfreesboro-tn|setbacks|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "murfreesboro-tn|height|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "murfreesboro-tn|lot_coverage|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "murfreesboro-tn|lot_size|industrial",
        "population": 3,
        "selected": 1
      },
      {
        "key": "murfreesboro-tn|permitted_uses|residential",
        "population": 14,
        "selected": 1
      },
      {
        "key": "murfreesboro-tn|special_land_uses|residential",
        "population": 11,
        "selected": 1
      },
      {
        "key": "murfreesboro-tn|setbacks|residential",
        "population": 14,
        "selected": 1
      },
      {
        "key": "murfreesboro-tn|height|residential",
        "population": 14,
        "selected": 1
      },
      {
        "key": "murfreesboro-tn|lot_coverage|residential",
        "population": 11,
        "selected": 1
      },
      {
        "key": "murfreesboro-tn|lot_size|residential",
        "population": 14,
        "selected": 1
      },
      {
        "key": "novi|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "novi|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "novi|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "novi|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "novi|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "novi|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "novi|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "novi|permitted_uses|commercial",
        "population": 10,
        "selected": 0
      },
      {
        "key": "novi|special_land_uses|commercial",
        "population": 8,
        "selected": 0
      },
      {
        "key": "novi|setbacks|commercial",
        "population": 9,
        "selected": 0
      },
      {
        "key": "novi|height|commercial",
        "population": 9,
        "selected": 0
      },
      {
        "key": "novi|lot_size|commercial",
        "population": 9,
        "selected": 1
      },
      {
        "key": "novi|parking|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "novi|permitted_uses|mixed",
        "population": 5,
        "selected": 1
      },
      {
        "key": "novi|permitted_uses|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "novi|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "novi|special_land_uses|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "novi|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "novi|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "novi|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "novi|parking|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "novi|permitted_uses|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "novi|setbacks|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "novi|height|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "novi|lot_size|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "novi|special_land_uses|residential",
        "population": 8,
        "selected": 1
      },
      {
        "key": "novi|lot_coverage|residential",
        "population": 8,
        "selected": 0
      },
      {
        "key": "novi|parking|residential",
        "population": 2,
        "selected": 0
      },
      {
        "key": "novi|special_land_uses|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "novi|setbacks|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "novi|height|mixed",
        "population": 2,
        "selected": 1
      },
      {
        "key": "novi|lot_size|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "novi|parking|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "orion-township|parking|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "orion-township|adu|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "orion-township|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "orion-township|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "orion-township|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "orion-township|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "orion-township|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "orion-township|permitted_uses|mixed",
        "population": 2,
        "selected": 1
      },
      {
        "key": "orion-township|permitted_uses|commercial",
        "population": 3,
        "selected": 1
      },
      {
        "key": "orion-township|special_land_uses|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "orion-township|setbacks|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "orion-township|height|commercial",
        "population": 3,
        "selected": 1
      },
      {
        "key": "orion-township|lot_coverage|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "orion-township|lot_size|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "orion-township|parking|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "orion-township|permitted_uses|industrial",
        "population": 4,
        "selected": 2
      },
      {
        "key": "orion-township|setbacks|industrial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "orion-township|height|industrial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "orion-township|lot_size|industrial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "orion-township|lot_coverage|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "orion-township|special_land_uses|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "orion-township|parking|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "orion-township|permitted_uses|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "orion-township|setbacks|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "orion-township|height|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "orion-township|lot_size|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "orion-township|special_land_uses|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "orion-township|lot_coverage|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "orion-township|permitted_uses|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "orion-township|setbacks|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "orion-township|height|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "orion-township|lot_coverage|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "orion-township|lot_size|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "orion-township|parking|residential",
        "population": 2,
        "selected": 0
      },
      {
        "key": "orion-township|setbacks|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "orion-township|height|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "orion-township|lot_coverage|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "orion-township|lot_size|mixed",
        "population": 1,
        "selected": 1
      },
      {
        "key": "pembroke-pines-fl|special_land_uses|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "pembroke-pines-fl|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pembroke-pines-fl|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pembroke-pines-fl|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pembroke-pines-fl|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pembroke-pines-fl|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pembroke-pines-fl|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pembroke-pines-fl|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pembroke-pines-fl|setbacks|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "pembroke-pines-fl|height|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "pembroke-pines-fl|lot_size|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "pembroke-pines-fl|special_land_uses|mixed",
        "population": 6,
        "selected": 0
      },
      {
        "key": "pembroke-pines-fl|setbacks|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "pembroke-pines-fl|height|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "pembroke-pines-fl|lot_size|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "pembroke-pines-fl|setbacks|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pembroke-pines-fl|lot_size|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pembroke-pines-fl|setbacks|residential",
        "population": 9,
        "selected": 1
      },
      {
        "key": "pembroke-pines-fl|height|residential",
        "population": 9,
        "selected": 1
      },
      {
        "key": "pembroke-pines-fl|lot_coverage|residential",
        "population": 7,
        "selected": 1
      },
      {
        "key": "pembroke-pines-fl|lot_size|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "pembroke-pines-fl|fences|residential",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|variance_process|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|permitted_uses|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|setbacks|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|height|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|lot_coverage|residential",
        "population": 9,
        "selected": 1
      },
      {
        "key": "pflugerville-tx|lot_size|residential",
        "population": 9,
        "selected": 2
      },
      {
        "key": "pflugerville-tx|permitted_uses|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|setbacks|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|height|industrial",
        "population": 3,
        "selected": 1
      },
      {
        "key": "pflugerville-tx|lot_coverage|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|parking|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|signs|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|permitted_uses|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|setbacks|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|height|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|parking|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|signs|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|permitted_uses|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|setbacks|commercial",
        "population": 5,
        "selected": 1
      },
      {
        "key": "pflugerville-tx|height|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|lot_coverage|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|parking|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|signs|commercial",
        "population": 5,
        "selected": 1
      },
      {
        "key": "pflugerville-tx|permitted_uses|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|setbacks|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|height|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|lot_coverage|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pflugerville-tx|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pilot-point-tx|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pilot-point-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pilot-point-tx|accessory_structures|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "pilot-point-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pilot-point-tx|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pilot-point-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pilot-point-tx|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pilot-point-tx|setbacks|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "pilot-point-tx|height|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "pilot-point-tx|lot_coverage|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "pilot-point-tx|lot_size|residential",
        "population": 6,
        "selected": 1
      },
      {
        "key": "pilot-point-tx|permitted_uses|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "pilot-point-tx|setbacks|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "pilot-point-tx|height|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "pilot-point-tx|lot_coverage|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "pilot-point-tx|lot_size|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "pilot-point-tx|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "pilot-point-tx|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "pilot-point-tx|lot_coverage|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "pilot-point-tx|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "pilot-point-tx|special_land_uses|residential",
        "population": 1,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|permitted_uses|commercial",
        "population": 5,
        "selected": 1
      },
      {
        "key": "port-st-lucie-fl|setbacks|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|height|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|lot_coverage|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|lot_size|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|permitted_uses|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|setbacks|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|height|residential",
        "population": 10,
        "selected": 2
      },
      {
        "key": "port-st-lucie-fl|lot_coverage|residential",
        "population": 10,
        "selected": 1
      },
      {
        "key": "port-st-lucie-fl|lot_size|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|permitted_uses|special",
        "population": 5,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|setbacks|special",
        "population": 5,
        "selected": 1
      },
      {
        "key": "port-st-lucie-fl|height|special",
        "population": 5,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|lot_coverage|special",
        "population": 5,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|lot_size|special",
        "population": 5,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|permitted_uses|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|setbacks|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|height|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|lot_coverage|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|lot_size|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|permitted_uses|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|setbacks|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|height|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "port-st-lucie-fl|lot_coverage|mixed",
        "population": 1,
        "selected": 1
      },
      {
        "key": "port-st-lucie-fl|lot_size|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "princeton-tx|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "princeton-tx|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "princeton-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "princeton-tx|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "princeton-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "princeton-tx|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "princeton-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "princeton-tx|variance_process|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "princeton-tx|permitted_uses|residential",
        "population": 12,
        "selected": 0
      },
      {
        "key": "princeton-tx|setbacks|residential",
        "population": 12,
        "selected": 0
      },
      {
        "key": "princeton-tx|height|residential",
        "population": 12,
        "selected": 1
      },
      {
        "key": "princeton-tx|lot_coverage|residential",
        "population": 12,
        "selected": 1
      },
      {
        "key": "princeton-tx|lot_size|residential",
        "population": 12,
        "selected": 0
      },
      {
        "key": "princeton-tx|parking|residential",
        "population": 12,
        "selected": 1
      },
      {
        "key": "princeton-tx|permitted_uses|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "princeton-tx|setbacks|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "princeton-tx|height|commercial",
        "population": 3,
        "selected": 1
      },
      {
        "key": "princeton-tx|lot_coverage|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "princeton-tx|lot_size|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "princeton-tx|parking|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "princeton-tx|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "princeton-tx|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "princeton-tx|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "princeton-tx|lot_coverage|industrial",
        "population": 2,
        "selected": 1
      },
      {
        "key": "princeton-tx|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "princeton-tx|parking|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "princeton-tx|signs|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "princeton-tx|permitted_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "princeton-tx|setbacks|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "prosper-tx|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "prosper-tx|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "prosper-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "prosper-tx|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "prosper-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "prosper-tx|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "prosper-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "prosper-tx|variance_process|special",
        "population": 2,
        "selected": 1
      },
      {
        "key": "prosper-tx|permitted_uses|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "prosper-tx|setbacks|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "prosper-tx|height|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "prosper-tx|lot_coverage|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "prosper-tx|lot_size|residential",
        "population": 6,
        "selected": 1
      },
      {
        "key": "prosper-tx|permitted_uses|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "prosper-tx|setbacks|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "prosper-tx|height|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "prosper-tx|lot_coverage|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "prosper-tx|lot_size|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "prosper-tx|permitted_uses|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "prosper-tx|setbacks|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "prosper-tx|height|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "prosper-tx|lot_coverage|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "prosper-tx|lot_size|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "prosper-tx|permitted_uses|special",
        "population": 2,
        "selected": 1
      },
      {
        "key": "prosper-tx|setbacks|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "queen-creek-az|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "queen-creek-az|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "queen-creek-az|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "queen-creek-az|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "queen-creek-az|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "queen-creek-az|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "queen-creek-az|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "queen-creek-az|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "queen-creek-az|permitted_uses|residential",
        "population": 16,
        "selected": 1
      },
      {
        "key": "queen-creek-az|setbacks|residential",
        "population": 16,
        "selected": 0
      },
      {
        "key": "queen-creek-az|height|residential",
        "population": 16,
        "selected": 2
      },
      {
        "key": "queen-creek-az|lot_coverage|residential",
        "population": 16,
        "selected": 1
      },
      {
        "key": "queen-creek-az|lot_size|residential",
        "population": 16,
        "selected": 2
      },
      {
        "key": "queen-creek-az|permitted_uses|special",
        "population": 4,
        "selected": 0
      },
      {
        "key": "queen-creek-az|setbacks|special",
        "population": 4,
        "selected": 0
      },
      {
        "key": "queen-creek-az|permitted_uses|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "queen-creek-az|setbacks|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "queen-creek-az|height|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "queen-creek-az|lot_coverage|commercial",
        "population": 4,
        "selected": 2
      },
      {
        "key": "queen-creek-az|parking|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "queen-creek-az|permitted_uses|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "queen-creek-az|setbacks|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "queen-creek-az|height|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "queen-creek-az|lot_coverage|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "queen-creek-az|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "queen-creek-az|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "queen-creek-az|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "queen-creek-az|lot_coverage|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "queen-creek-az|height|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "queen-creek-az|lot_coverage|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rochester|permitted_uses|commercial",
        "population": 6,
        "selected": 2
      },
      {
        "key": "rochester|setbacks|commercial",
        "population": 8,
        "selected": 1
      },
      {
        "key": "rochester|height|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "rochester|lot_coverage|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "rochester|lot_size|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "rochester|parking|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "rochester|signs|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "rochester|variance_process|commercial",
        "population": 8,
        "selected": 1
      },
      {
        "key": "rochester|special_land_uses|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rochester|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "rochester|setbacks|industrial",
        "population": 2,
        "selected": 1
      },
      {
        "key": "rochester|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "rochester|lot_coverage|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "rochester|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "rochester|parking|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "rochester|signs|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "rochester|variance_process|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "rochester|permitted_uses|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "rochester|setbacks|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "rochester|height|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "rochester|lot_coverage|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "rochester|lot_size|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "rochester|parking|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "rochester|signs|residential",
        "population": 9,
        "selected": 2
      },
      {
        "key": "rochester|home_occupation|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "rochester|permitted_uses|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "rochester|setbacks|special",
        "population": 3,
        "selected": 1
      },
      {
        "key": "rochester|height|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "rochester|lot_coverage|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "rochester|lot_size|special",
        "population": 3,
        "selected": 1
      },
      {
        "key": "rochester|parking|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "rochester|signs|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "rochester|adu|residential",
        "population": 8,
        "selected": 1
      },
      {
        "key": "rochester|accessory_structures|residential",
        "population": 8,
        "selected": 0
      },
      {
        "key": "rochester|fences|residential",
        "population": 8,
        "selected": 1
      },
      {
        "key": "rochester|variance_process|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "rochester|special_land_uses|residential",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rochester|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rochester-hills|permitted_uses|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "rochester-hills|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rochester-hills|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rochester-hills|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rochester-hills|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rochester-hills|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rochester-hills|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rochester-hills|variance_process|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "rochester-hills|permitted_uses|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "rochester-hills|setbacks|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "rochester-hills|height|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "rochester-hills|lot_coverage|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "rochester-hills|lot_size|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "rochester-hills|permitted_uses|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "rochester-hills|setbacks|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "rochester-hills|height|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "rochester-hills|lot_coverage|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "rochester-hills|lot_size|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "rochester-hills|permitted_uses|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rochester-hills|setbacks|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rochester-hills|height|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rochester-hills|lot_coverage|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rochester-hills|lot_size|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rochester-hills|permitted_uses|residential",
        "population": 10,
        "selected": 1
      },
      {
        "key": "rochester-hills|setbacks|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "rochester-hills|height|residential",
        "population": 10,
        "selected": 1
      },
      {
        "key": "rochester-hills|lot_coverage|residential",
        "population": 10,
        "selected": 2
      },
      {
        "key": "rochester-hills|lot_size|residential",
        "population": 10,
        "selected": 1
      },
      {
        "key": "rochester-hills|special_land_uses|residential",
        "population": 5,
        "selected": 1
      },
      {
        "key": "rochester-hills|parking|residential",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rochester-hills|setbacks|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rochester-hills|height|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rochester-hills|lot_coverage|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rochester-hills|lot_size|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rockwall-tx|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rockwall-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rockwall-tx|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rockwall-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rockwall-tx|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rockwall-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rockwall-tx|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rockwall-tx|permitted_uses|residential",
        "population": 11,
        "selected": 0
      },
      {
        "key": "rockwall-tx|setbacks|residential",
        "population": 11,
        "selected": 1
      },
      {
        "key": "rockwall-tx|height|residential",
        "population": 11,
        "selected": 1
      },
      {
        "key": "rockwall-tx|lot_coverage|residential",
        "population": 11,
        "selected": 1
      },
      {
        "key": "rockwall-tx|lot_size|residential",
        "population": 11,
        "selected": 0
      },
      {
        "key": "rockwall-tx|permitted_uses|special",
        "population": 14,
        "selected": 1
      },
      {
        "key": "rockwall-tx|setbacks|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "rockwall-tx|height|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "rockwall-tx|lot_coverage|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rockwall-tx|lot_size|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rockwall-tx|permitted_uses|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "rockwall-tx|setbacks|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "rockwall-tx|height|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "rockwall-tx|lot_coverage|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "rockwall-tx|lot_size|commercial",
        "population": 5,
        "selected": 1
      },
      {
        "key": "rockwall-tx|permitted_uses|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rockwall-tx|setbacks|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rockwall-tx|height|mixed",
        "population": 1,
        "selected": 1
      },
      {
        "key": "rockwall-tx|lot_coverage|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rockwall-tx|lot_size|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "rockwall-tx|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "rockwall-tx|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "rockwall-tx|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "rockwall-tx|lot_coverage|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "rockwall-tx|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "round-rock-tx|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "round-rock-tx|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "round-rock-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "round-rock-tx|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "round-rock-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "round-rock-tx|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "round-rock-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "round-rock-tx|variance_process|special",
        "population": 2,
        "selected": 1
      },
      {
        "key": "round-rock-tx|permitted_uses|residential",
        "population": 13,
        "selected": 2
      },
      {
        "key": "round-rock-tx|setbacks|residential",
        "population": 13,
        "selected": 0
      },
      {
        "key": "round-rock-tx|height|residential",
        "population": 13,
        "selected": 0
      },
      {
        "key": "round-rock-tx|lot_coverage|residential",
        "population": 13,
        "selected": 1
      },
      {
        "key": "round-rock-tx|lot_size|residential",
        "population": 13,
        "selected": 1
      },
      {
        "key": "round-rock-tx|permitted_uses|industrial",
        "population": 4,
        "selected": 1
      },
      {
        "key": "round-rock-tx|setbacks|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "round-rock-tx|height|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "round-rock-tx|parking|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "round-rock-tx|permitted_uses|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "round-rock-tx|setbacks|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "round-rock-tx|height|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "round-rock-tx|parking|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "round-rock-tx|signs|commercial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "round-rock-tx|permitted_uses|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "round-rock-tx|special_land_uses|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "round-rock-tx|setbacks|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "round-rock-tx|height|mixed",
        "population": 5,
        "selected": 0
      },
      {
        "key": "round-rock-tx|permitted_uses|special",
        "population": 5,
        "selected": 2
      },
      {
        "key": "round-rock-tx|setbacks|special",
        "population": 4,
        "selected": 0
      },
      {
        "key": "round-rock-tx|height|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "royal-oak|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royal-oak|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royal-oak|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royal-oak|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royal-oak|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royal-oak|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royal-oak|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royal-oak|permitted_uses|residential",
        "population": 4,
        "selected": 0
      },
      {
        "key": "royal-oak|special_land_uses|residential",
        "population": 3,
        "selected": 2
      },
      {
        "key": "royal-oak|setbacks|residential",
        "population": 4,
        "selected": 1
      },
      {
        "key": "royal-oak|height|residential",
        "population": 4,
        "selected": 1
      },
      {
        "key": "royal-oak|lot_coverage|residential",
        "population": 4,
        "selected": 1
      },
      {
        "key": "royal-oak|lot_size|residential",
        "population": 4,
        "selected": 0
      },
      {
        "key": "royal-oak|permitted_uses|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "royal-oak|setbacks|commercial",
        "population": 6,
        "selected": 1
      },
      {
        "key": "royal-oak|height|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "royal-oak|lot_coverage|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "royal-oak|lot_size|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "royal-oak|permitted_uses|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royal-oak|setbacks|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royal-oak|height|industrial",
        "population": 1,
        "selected": 1
      },
      {
        "key": "royal-oak|lot_coverage|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royal-oak|lot_size|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royal-oak|permitted_uses|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "royal-oak|setbacks|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "royal-oak|height|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "royal-oak|lot_coverage|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "royal-oak|lot_size|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "royal-oak|permitted_uses|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "royal-oak|setbacks|special",
        "population": 2,
        "selected": 1
      },
      {
        "key": "royal-oak|height|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "royal-oak|lot_coverage|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "royal-oak|lot_size|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "royse-city-tx|permitted_uses|special",
        "population": 5,
        "selected": 0
      },
      {
        "key": "royse-city-tx|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royse-city-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royse-city-tx|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royse-city-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royse-city-tx|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royse-city-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royse-city-tx|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royse-city-tx|permitted_uses|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "royse-city-tx|setbacks|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "royse-city-tx|height|residential",
        "population": 6,
        "selected": 1
      },
      {
        "key": "royse-city-tx|lot_coverage|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "royse-city-tx|lot_size|residential",
        "population": 6,
        "selected": 1
      },
      {
        "key": "royse-city-tx|permitted_uses|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "royse-city-tx|setbacks|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "royse-city-tx|height|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "royse-city-tx|lot_coverage|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "royse-city-tx|lot_size|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "royse-city-tx|setbacks|special",
        "population": 4,
        "selected": 0
      },
      {
        "key": "royse-city-tx|height|special",
        "population": 4,
        "selected": 0
      },
      {
        "key": "royse-city-tx|lot_coverage|special",
        "population": 4,
        "selected": 0
      },
      {
        "key": "royse-city-tx|lot_size|special",
        "population": 4,
        "selected": 0
      },
      {
        "key": "royse-city-tx|permitted_uses|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royse-city-tx|setbacks|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royse-city-tx|height|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royse-city-tx|lot_coverage|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "royse-city-tx|lot_size|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "san-marcos-tx|special_land_uses|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "san-marcos-tx|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "san-marcos-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "san-marcos-tx|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "san-marcos-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "san-marcos-tx|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "san-marcos-tx|home_occupation|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "san-marcos-tx|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "san-marcos-tx|permitted_uses|residential",
        "population": 22,
        "selected": 2
      },
      {
        "key": "san-marcos-tx|setbacks|residential",
        "population": 22,
        "selected": 1
      },
      {
        "key": "san-marcos-tx|height|residential",
        "population": 22,
        "selected": 0
      },
      {
        "key": "san-marcos-tx|lot_coverage|residential",
        "population": 22,
        "selected": 0
      },
      {
        "key": "san-marcos-tx|lot_size|residential",
        "population": 22,
        "selected": 2
      },
      {
        "key": "san-marcos-tx|permitted_uses|commercial",
        "population": 7,
        "selected": 1
      },
      {
        "key": "san-marcos-tx|setbacks|commercial",
        "population": 7,
        "selected": 1
      },
      {
        "key": "san-marcos-tx|height|commercial",
        "population": 7,
        "selected": 1
      },
      {
        "key": "san-marcos-tx|lot_coverage|commercial",
        "population": 7,
        "selected": 0
      },
      {
        "key": "san-marcos-tx|lot_size|commercial",
        "population": 7,
        "selected": 0
      },
      {
        "key": "san-marcos-tx|permitted_uses|special",
        "population": 5,
        "selected": 0
      },
      {
        "key": "san-marcos-tx|lot_coverage|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "san-marcos-tx|permitted_uses|mixed",
        "population": 6,
        "selected": 1
      },
      {
        "key": "san-marcos-tx|setbacks|mixed",
        "population": 6,
        "selected": 1
      },
      {
        "key": "san-marcos-tx|height|mixed",
        "population": 6,
        "selected": 1
      },
      {
        "key": "san-marcos-tx|lot_coverage|mixed",
        "population": 6,
        "selected": 0
      },
      {
        "key": "san-marcos-tx|lot_size|mixed",
        "population": 6,
        "selected": 1
      },
      {
        "key": "san-marcos-tx|parking|mixed",
        "population": 4,
        "selected": 1
      },
      {
        "key": "san-marcos-tx|permitted_uses|industrial",
        "population": 2,
        "selected": 1
      },
      {
        "key": "san-marcos-tx|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "san-marcos-tx|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "san-marcos-tx|lot_coverage|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "san-marcos-tx|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "san-marcos-tx|setbacks|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "san-marcos-tx|height|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "san-marcos-tx|lot_size|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "shelby-township|permitted_uses|special",
        "population": 3,
        "selected": 1
      },
      {
        "key": "shelby-township|special_land_uses|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "shelby-township|setbacks|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "shelby-township|lot_size|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "shelby-township|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "shelby-township|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "shelby-township|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "shelby-township|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "shelby-township|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "shelby-township|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "shelby-township|variance_process|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "shelby-township|permitted_uses|commercial",
        "population": 6,
        "selected": 1
      },
      {
        "key": "shelby-township|special_land_uses|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "shelby-township|setbacks|commercial",
        "population": 6,
        "selected": 1
      },
      {
        "key": "shelby-township|height|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "shelby-township|lot_coverage|commercial",
        "population": 6,
        "selected": 2
      },
      {
        "key": "shelby-township|lot_size|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "shelby-township|permitted_uses|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "shelby-township|special_land_uses|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "shelby-township|setbacks|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "shelby-township|height|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "shelby-township|lot_coverage|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "shelby-township|lot_size|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "shelby-township|signs|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "shelby-township|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "shelby-township|special_land_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "shelby-township|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "shelby-township|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "shelby-township|lot_coverage|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "shelby-township|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "shelby-township|permitted_uses|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "shelby-township|special_land_uses|residential",
        "population": 8,
        "selected": 0
      },
      {
        "key": "shelby-township|setbacks|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "shelby-township|height|residential",
        "population": 9,
        "selected": 2
      },
      {
        "key": "shelby-township|lot_size|residential",
        "population": 17,
        "selected": 1
      },
      {
        "key": "shelby-township|lot_coverage|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "shelby-township|height|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "smyrna-tn|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "smyrna-tn|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "smyrna-tn|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "smyrna-tn|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "smyrna-tn|signs|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "smyrna-tn|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "smyrna-tn|variance_process|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "smyrna-tn|permitted_uses|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "smyrna-tn|setbacks|mixed",
        "population": 1,
        "selected": 1
      },
      {
        "key": "smyrna-tn|height|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "smyrna-tn|lot_coverage|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "smyrna-tn|lot_size|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "smyrna-tn|permitted_uses|commercial",
        "population": 7,
        "selected": 0
      },
      {
        "key": "smyrna-tn|setbacks|commercial",
        "population": 7,
        "selected": 0
      },
      {
        "key": "smyrna-tn|height|commercial",
        "population": 7,
        "selected": 1
      },
      {
        "key": "smyrna-tn|lot_coverage|commercial",
        "population": 7,
        "selected": 0
      },
      {
        "key": "smyrna-tn|lot_size|commercial",
        "population": 7,
        "selected": 1
      },
      {
        "key": "smyrna-tn|permitted_uses|special",
        "population": 8,
        "selected": 1
      },
      {
        "key": "smyrna-tn|height|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "smyrna-tn|permitted_uses|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "smyrna-tn|setbacks|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "smyrna-tn|height|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "smyrna-tn|lot_coverage|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "smyrna-tn|lot_size|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "smyrna-tn|setbacks|special",
        "population": 4,
        "selected": 1
      },
      {
        "key": "smyrna-tn|permitted_uses|residential",
        "population": 6,
        "selected": 1
      },
      {
        "key": "smyrna-tn|setbacks|residential",
        "population": 6,
        "selected": 1
      },
      {
        "key": "smyrna-tn|height|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "smyrna-tn|lot_coverage|residential",
        "population": 6,
        "selected": 1
      },
      {
        "key": "smyrna-tn|lot_size|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "southfield|parking|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "southfield|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "southfield|fences|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "southfield|signs|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "southfield|variance_process|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "southfield|permitted_uses|commercial",
        "population": 9,
        "selected": 0
      },
      {
        "key": "southfield|setbacks|commercial",
        "population": 8,
        "selected": 1
      },
      {
        "key": "southfield|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "southfield|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "southfield|setbacks|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "southfield|height|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "southfield|lot_coverage|residential",
        "population": 6,
        "selected": 1
      },
      {
        "key": "southfield|lot_size|residential",
        "population": 6,
        "selected": 2
      },
      {
        "key": "southfield|permitted_uses|residential",
        "population": 5,
        "selected": 1
      },
      {
        "key": "southfield|special_land_uses|residential",
        "population": 1,
        "selected": 0
      },
      {
        "key": "southfield|permitted_uses|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "southfield|setbacks|mixed",
        "population": 1,
        "selected": 1
      },
      {
        "key": "spring-hill-tn|permitted_uses|special",
        "population": 8,
        "selected": 1
      },
      {
        "key": "spring-hill-tn|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "spring-hill-tn|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "spring-hill-tn|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "spring-hill-tn|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "spring-hill-tn|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "spring-hill-tn|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "spring-hill-tn|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "spring-hill-tn|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "spring-hill-tn|setbacks|special",
        "population": 4,
        "selected": 0
      },
      {
        "key": "spring-hill-tn|height|special",
        "population": 4,
        "selected": 0
      },
      {
        "key": "spring-hill-tn|permitted_uses|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "spring-hill-tn|setbacks|commercial",
        "population": 6,
        "selected": 1
      },
      {
        "key": "spring-hill-tn|height|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "spring-hill-tn|lot_coverage|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "spring-hill-tn|lot_size|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "spring-hill-tn|permitted_uses|mixed",
        "population": 9,
        "selected": 1
      },
      {
        "key": "spring-hill-tn|setbacks|mixed",
        "population": 9,
        "selected": 0
      },
      {
        "key": "spring-hill-tn|height|mixed",
        "population": 3,
        "selected": 1
      },
      {
        "key": "spring-hill-tn|lot_coverage|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "spring-hill-tn|lot_size|mixed",
        "population": 3,
        "selected": 0
      },
      {
        "key": "spring-hill-tn|permitted_uses|industrial",
        "population": 3,
        "selected": 1
      },
      {
        "key": "spring-hill-tn|setbacks|industrial",
        "population": 3,
        "selected": 1
      },
      {
        "key": "spring-hill-tn|height|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "spring-hill-tn|lot_size|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "spring-hill-tn|permitted_uses|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "spring-hill-tn|setbacks|residential",
        "population": 10,
        "selected": 1
      },
      {
        "key": "spring-hill-tn|height|residential",
        "population": 9,
        "selected": 1
      },
      {
        "key": "spring-hill-tn|lot_coverage|residential",
        "population": 9,
        "selected": 1
      },
      {
        "key": "spring-hill-tn|lot_size|residential",
        "population": 10,
        "selected": 1
      },
      {
        "key": "spring-hill-tn|parking|residential",
        "population": 1,
        "selected": 0
      },
      {
        "key": "sterling-heights|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "sterling-heights|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "sterling-heights|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "sterling-heights|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "sterling-heights|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "sterling-heights|home_occupation|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "sterling-heights|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "sterling-heights|permitted_uses|commercial",
        "population": 8,
        "selected": 0
      },
      {
        "key": "sterling-heights|special_land_uses|commercial",
        "population": 8,
        "selected": 0
      },
      {
        "key": "sterling-heights|setbacks|commercial",
        "population": 8,
        "selected": 0
      },
      {
        "key": "sterling-heights|height|commercial",
        "population": 8,
        "selected": 1
      },
      {
        "key": "sterling-heights|lot_size|commercial",
        "population": 7,
        "selected": 0
      },
      {
        "key": "sterling-heights|permitted_uses|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "sterling-heights|setbacks|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "sterling-heights|lot_coverage|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "sterling-heights|lot_size|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "sterling-heights|parking|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "sterling-heights|permitted_uses|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "sterling-heights|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "sterling-heights|permitted_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "sterling-heights|special_land_uses|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "sterling-heights|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "sterling-heights|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "sterling-heights|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "sterling-heights|parking|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "sterling-heights|accessory_structures|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "sterling-heights|permitted_uses|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "sterling-heights|special_land_uses|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "sterling-heights|setbacks|residential",
        "population": 10,
        "selected": 1
      },
      {
        "key": "sterling-heights|height|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "sterling-heights|lot_size|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "sterling-heights|parking|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "sterling-heights|lot_coverage|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "sterling-heights|setbacks|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "sterling-heights|height|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "sterling-heights|lot_size|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "sterling-heights|special_land_uses|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "sterling-heights|lot_coverage|residential",
        "population": 9,
        "selected": 0
      },
      {
        "key": "sterling-heights|parking|residential",
        "population": 1,
        "selected": 0
      },
      {
        "key": "surprise-az|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "surprise-az|parking|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "surprise-az|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "surprise-az|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "surprise-az|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "surprise-az|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "surprise-az|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "surprise-az|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "surprise-az|permitted_uses|industrial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "surprise-az|setbacks|industrial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "surprise-az|permitted_uses|commercial",
        "population": 5,
        "selected": 1
      },
      {
        "key": "surprise-az|setbacks|commercial",
        "population": 5,
        "selected": 0
      },
      {
        "key": "surprise-az|permitted_uses|mixed",
        "population": 4,
        "selected": 0
      },
      {
        "key": "surprise-az|setbacks|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "surprise-az|permitted_uses|special",
        "population": 5,
        "selected": 0
      },
      {
        "key": "surprise-az|setbacks|special",
        "population": 3,
        "selected": 0
      },
      {
        "key": "surprise-az|permitted_uses|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "surprise-az|setbacks|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "surprise-az|height|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "surprise-az|lot_size|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "surprise-az|height|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "surprise-az|lot_coverage|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "surprise-az|lot_size|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "surprise-az|lot_coverage|residential",
        "population": 1,
        "selected": 0
      },
      {
        "key": "surprise-az|home_occupation|residential",
        "population": 1,
        "selected": 0
      },
      {
        "key": "troy|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "troy|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "troy|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "troy|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "troy|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "troy|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "troy|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "troy|permitted_uses|mixed",
        "population": 2,
        "selected": 0
      },
      {
        "key": "troy|permitted_uses|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "troy|permitted_uses|industrial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "troy|permitted_uses|residential",
        "population": 8,
        "selected": 1
      },
      {
        "key": "troy|setbacks|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "troy|height|residential",
        "population": 6,
        "selected": 1
      },
      {
        "key": "troy|lot_size|residential",
        "population": 6,
        "selected": 0
      },
      {
        "key": "troy|special_land_uses|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "troy|lot_coverage|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|special_land_uses|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|parking|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|permitted_uses|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|setbacks|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|height|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|lot_size|residential",
        "population": 5,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|permitted_uses|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|setbacks|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|height|commercial",
        "population": 2,
        "selected": 1
      },
      {
        "key": "wake-forest-nc|lot_size|commercial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|permitted_uses|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|setbacks|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|height|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|lot_size|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|permitted_uses|mixed",
        "population": 4,
        "selected": 1
      },
      {
        "key": "wake-forest-nc|setbacks|mixed",
        "population": 4,
        "selected": 2
      },
      {
        "key": "wake-forest-nc|height|mixed",
        "population": 4,
        "selected": 0
      },
      {
        "key": "wake-forest-nc|lot_size|mixed",
        "population": 1,
        "selected": 0
      },
      {
        "key": "waxahachie-tx|parking|special",
        "population": 2,
        "selected": 0
      },
      {
        "key": "waxahachie-tx|adu|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "waxahachie-tx|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "waxahachie-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "waxahachie-tx|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "waxahachie-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "waxahachie-tx|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "waxahachie-tx|setbacks|residential",
        "population": 11,
        "selected": 2
      },
      {
        "key": "waxahachie-tx|height|residential",
        "population": 10,
        "selected": 0
      },
      {
        "key": "waxahachie-tx|lot_coverage|residential",
        "population": 11,
        "selected": 2
      },
      {
        "key": "waxahachie-tx|lot_size|residential",
        "population": 11,
        "selected": 1
      },
      {
        "key": "waxahachie-tx|parking|residential",
        "population": 11,
        "selected": 0
      },
      {
        "key": "waxahachie-tx|setbacks|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "waxahachie-tx|height|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "waxahachie-tx|lot_coverage|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "waxahachie-tx|lot_size|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "waxahachie-tx|setbacks|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "waxahachie-tx|height|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "waxahachie-tx|lot_coverage|commercial",
        "population": 6,
        "selected": 1
      },
      {
        "key": "waxahachie-tx|lot_size|commercial",
        "population": 6,
        "selected": 0
      },
      {
        "key": "waxahachie-tx|parking|commercial",
        "population": 6,
        "selected": 1
      },
      {
        "key": "waxahachie-tx|permitted_uses|commercial",
        "population": 1,
        "selected": 0
      },
      {
        "key": "waxahachie-tx|setbacks|industrial",
        "population": 3,
        "selected": 1
      },
      {
        "key": "waxahachie-tx|height|industrial",
        "population": 3,
        "selected": 1
      },
      {
        "key": "waxahachie-tx|lot_coverage|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "waxahachie-tx|lot_size|industrial",
        "population": 3,
        "selected": 0
      },
      {
        "key": "waxahachie-tx|parking|industrial",
        "population": 3,
        "selected": 1
      },
      {
        "key": "wylie-tx|adu|special",
        "population": 1,
        "selected": 1
      },
      {
        "key": "wylie-tx|accessory_structures|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "wylie-tx|fences|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "wylie-tx|signs|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "wylie-tx|home_occupation|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "wylie-tx|variance_process|special",
        "population": 1,
        "selected": 0
      },
      {
        "key": "wylie-tx|setbacks|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "wylie-tx|height|residential",
        "population": 7,
        "selected": 1
      },
      {
        "key": "wylie-tx|lot_coverage|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "wylie-tx|lot_size|residential",
        "population": 7,
        "selected": 0
      },
      {
        "key": "wylie-tx|setbacks|commercial",
        "population": 4,
        "selected": 1
      },
      {
        "key": "wylie-tx|height|commercial",
        "population": 4,
        "selected": 1
      },
      {
        "key": "wylie-tx|lot_coverage|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "wylie-tx|lot_size|commercial",
        "population": 4,
        "selected": 0
      },
      {
        "key": "wylie-tx|setbacks|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "wylie-tx|height|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "wylie-tx|lot_coverage|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "wylie-tx|lot_size|industrial",
        "population": 2,
        "selected": 0
      },
      {
        "key": "wylie-tx|permitted_uses|residential",
        "population": 1,
        "selected": 0
      }
    ],
    "cities_selected": 63
  },
  "sample": [
    {
      "municipality_slug": "anna-tx",
      "district_code": "*",
      "topic": "parking",
      "body_md": "Off-street parking is set by use, not by district, in the Parking Standards column of Table 19: Use Table. Examples: single-family and two-family dwellings **2 spaces per dwelling unit**; multi-family **1 to 2 spaces per unit by bedroom count plus 0.25 per unit for visitors** (50 percent of required parking must be covered, not including visitor parking); retail store **4 per 1,000 square feet**; office **3 per 1,000 square feet**; restaurant **5 per 1,000 square feet (buildings 2,500 square feet or less) or 10 per 1,000 square feet (larger buildings)**. General parking design and reduction standards are in Sec. 9.04.043.",
      "citation": "Table 19: Use Table (Sec. 9.04.028); Sec. 9.04.043",
      "source_url": "https://www.annatexas.gov/DocumentCenter/View/10572/Anna-Zoning-Ordinance",
      "sort_order": 1,
      "id": "1949413172bdf5053ce1300b86955f786ac9b08b2579688073519084ac26bfa3",
      "frame_index": 0,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "anna-tx",
      "district_code": "PD",
      "topic": "permitted_uses",
      "body_md": "Any use specified in a PD district's adopting ordinance is permitted in that district; size, location, appearance, and method of operation may be further restricted in that ordinance. PD applications must list all requested variances from the standard citywide requirements with justification (Sec. 9.04.026(d)(2)). Confirm the specific adopting ordinance for the property before acting.",
      "citation": "Sec. 9.04.026(b)",
      "source_url": "https://www.annatexas.gov/DocumentCenter/View/10572/Anna-Zoning-Ordinance",
      "sort_order": 1,
      "id": "9622419d2a5f73fd41c568c1db1c8905536469bb45a5fbbabfaa196d3a626bc0",
      "frame_index": 42,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "anna-tx",
      "district_code": "THOR",
      "topic": "setbacks",
      "body_md": "Nonresidential minimum front yard setback **50 feet**, within the THOR corridor buffer. Nonresidential minimum lot width **100 feet**. Building lots along a Master Thoroughfare Plan highway must be at least **1 acre**.",
      "citation": "Sec. 9.04.025(c)",
      "source_url": "https://www.annatexas.gov/DocumentCenter/View/10572/Anna-Zoning-Ordinance",
      "sort_order": 1,
      "id": "e83c0c7925eb0c601a200940c9aea9b6b4e35a5168a3377a450ac80df43da6ad",
      "frame_index": 73,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "apex-nc",
      "district_code": "*",
      "topic": "special_land_uses",
      "body_md": "The UDO applies to all land within the Town of Apex's corporate limits AND its extraterritorial jurisdiction (ETJ), except a small area assigned to the Town of Cary's zoning jurisdiction under a 1969 boundary agreement between Apex and Cary. Bona fide farms as defined by the North Carolina General Statutes are exempt from the UDO (Sec. 1.4.4). Confirm ETJ boundary status with Planning for property near the town line.",
      "citation": "Sec. 1.4.1",
      "source_url": "https://apexnc.org/DocumentCenter/View/527",
      "sort_order": 1,
      "id": "a228afdb92fc2b4dc57acb240af73c08f1206396f3fdab2ff691a1fb8e49ed48",
      "frame_index": 74,
      "category": "special",
      "pack_version": 2
    },
    {
      "municipality_slug": "apex-nc",
      "district_code": "HDSF",
      "topic": "lot_coverage",
      "body_md": "Maximum built-upon area **65 percent** for single family, duplexes, townhouses, and townhouses (detached). Maximum density: duplexes **8 gross units per acre**; townhouses (detached) **7 gross units per acre** (Sec. 4.4.1.J); single family has no listed density cap in this chart.",
      "citation": "Sec. 5.1.1 chart (HDSF row)",
      "source_url": "https://apexnc.org/DocumentCenter/View/551",
      "sort_order": 1,
      "id": "a09bb946038ced13b25139d1c8798016e2c7d7c9c10d66ec6d01f140d582f3ed",
      "frame_index": 110,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "apex-nc",
      "district_code": "LD",
      "topic": "height",
      "body_md": "Maximum **40 feet** for single family. Church or place of worship: 48 feet. All other uses: 36 feet. Schools may reach 5 stories and 75 feet.",
      "citation": "Sec. 5.1.1 chart (LD row)",
      "source_url": "https://apexnc.org/DocumentCenter/View/551",
      "sort_order": 1,
      "id": "e1f3fa5b3caeb050585b681d860f665aa11fadb3e69fed7ec1ae9f92dd169156",
      "frame_index": 118,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "apex-nc",
      "district_code": "LD",
      "topic": "lot_size",
      "body_md": "Single family: minimum lot size **10,000 square feet**, minimum lot width **50 feet**.",
      "citation": "Sec. 5.1.1 chart (LD row)",
      "source_url": "https://apexnc.org/DocumentCenter/View/551",
      "sort_order": 1,
      "id": "4cc4d85e90441d1af40b5f5d1be57b465dd96f16722553e7b22510e1b80848af",
      "frame_index": 120,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "apex-nc",
      "district_code": "LI",
      "topic": "permitted_uses",
      "body_md": "Light manufacturing or processing uses sited to limit undesirable effects on residential or commercial lands (Sec. 3.3.3). Dispatching office, pilot plant (P), research facility, self-service storage, upholstery shop, automotive service/repair uses, and regional recreational complex are permitted. No hazardous or noxious uses (Sec. 4.2.2.H list: abattoirs, asphalt manufacture, explosives manufacture, and similar) are allowed in any district including LI. Exact use-table markings for every use type in LI are review-gated; see the full Use Table (Sec. 4.2.2).",
      "citation": "Sec. 3.3.3; Table 4.2.2",
      "source_url": "https://apexnc.org/DocumentCenter/View/540",
      "sort_order": 1,
      "id": "c9b7c1633265bf659f060caa33f81c18e9331d1ee87e4e5a9a73089f0d949a3d",
      "frame_index": 121,
      "category": "industrial",
      "pack_version": 2
    },
    {
      "municipality_slug": "apex-nc",
      "district_code": "MH",
      "topic": "setbacks",
      "body_md": "Manufactured home and single family home: front **25 feet**, side **8 feet**, rear **25 feet**, corner side **15 feet**.",
      "citation": "Sec. 5.1.1 chart (MH row)",
      "source_url": "https://apexnc.org/DocumentCenter/View/551",
      "sort_order": 1,
      "id": "bf089bfe67da1631278452994b631a28685a034d7c6db6b8efb6e954f2b670a7",
      "frame_index": 132,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "apex-nc",
      "district_code": "O&I",
      "topic": "parking",
      "body_md": "Off-street parking is set by use under the citywide Off-Street Parking Schedule A (Table 8.3-1), not by district. Office/business/professional and medical/dental clinic uses have their own ratios in that table.",
      "citation": "Table 8.3-1 (Sec. 8.3.2)",
      "source_url": "https://apexnc.org/DocumentCenter/View/564",
      "sort_order": 1,
      "id": "fc275dcd8a44881d7aa6c4811d36e6aecd2c9b8d38c27b10e990b9bb19098c9b",
      "frame_index": 151,
      "category": "commercial",
      "pack_version": 2
    },
    {
      "municipality_slug": "apex-nc",
      "district_code": "TF",
      "topic": "lot_coverage",
      "body_md": "Maximum built-upon area **70 percent**.",
      "citation": "Sec. 5.1.2 chart (TF row)",
      "source_url": "https://apexnc.org/DocumentCenter/View/551",
      "sort_order": 1,
      "id": "dd0a0b1755470f5be8965d234aae74906102be239aca5322be152c8634781e31",
      "frame_index": 171,
      "category": "commercial",
      "pack_version": 2
    },
    {
      "municipality_slug": "aubrey-tx",
      "district_code": "*",
      "topic": "variance_process",
      "body_md": "Variances are heard by the Board of Adjustment. A concurring vote of four members is necessary to authorize a variation from the ordinance. The applicant must show special conditions, that literal interpretation would deprive common rights, that the conditions do not result from the applicant's actions, and that the variance will not confer a special privilege.",
      "citation": "Sec. 3 Administration, Enforcement and Fees",
      "source_url": "https://ecode360.com/40431852",
      "sort_order": 1,
      "id": "d4ce63d353304e7e97be2fa833eb5f6b29628345a2b578f142ce593d6a042823",
      "frame_index": 174,
      "category": "special",
      "pack_version": 2
    },
    {
      "municipality_slug": "aubrey-tx",
      "district_code": "AG-R",
      "topic": "setbacks",
      "body_md": "Front yard 45 feet. Side yard 30 feet. Rear yard 50 feet.",
      "citation": "Sec. 22 Schedule of District Regulations",
      "source_url": "https://ecode360.com/40431852",
      "sort_order": 1,
      "id": "1e78da85c6f0b72e4b196f89d322625efb6406f70471fd38a19f86c7f16a3172",
      "frame_index": 175,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "aubrey-tx",
      "district_code": "GR",
      "topic": "height",
      "body_md": "Maximum height 45 feet.",
      "citation": "Sec. 22 Schedule of District Regulations",
      "source_url": "https://ecode360.com/40431852",
      "sort_order": 1,
      "id": "d64484631c737a701e0a768ba1b9bc4873a57ef6f5e8fe52bc457fe59f92a7eb",
      "frame_index": 185,
      "category": "commercial",
      "pack_version": 2
    },
    {
      "municipality_slug": "birmingham",
      "district_code": "*",
      "topic": "parking",
      "body_md": "Residential parking (§ 4.46 PK-02, Table A): **1.5 spaces** per unit with 2 or fewer rooms, **2 spaces** per unit with 3 or more rooms, in the PP, R1A through R7, O1, O2, P, and B1 districts. R8 needs **2 spaces** per unit. Residential uses in B2, B2B, B3, and MX need 1 to 1.25 spaces per unit; B4 needs 1.25 to 1.5. Residential buildings must provide their required spaces on the same lot (PK-02(B)).\n\n- A parking space is at least **180 square feet**, exclusive of aisles (§ 9.02). Chapter 126 sets no stall width, length, or aisle dimensions; those live in Chapter 110 of the City Code, so check there before drawing a parking layout.\n- Vehicles may stand in the front open space only on paved surfaces (§ 4.31 OS-02). In R8, parking in the front or side open space is limited to driveways, and required parking must be in a garage, carport, or under the building (§ 4.48 PK-04).\n- Commercial ratios: retail **1 per 300 square feet**; office **1 per 300**; medical **1 per 150**; restaurants **1 per 75 square feet** indoor and 1 per 50 outdoor; hotels 1 per room plus 1 per 25 rooms; theaters 1 per 3 seats.\n- The Planning Board may reduce requirements by up to **50 percent** for shared parking (§ 4.45 PK-01).",
      "citation": "§ 4.46 PK-02; § 4.45 PK-01; § 9.02",
      "source_url": "https://online.encodeplus.com/regs/birmingham-mi/index.aspx",
      "sort_order": 1,
      "id": "b2e66fbec6545fc7ea5d0a99141e4fbf5fac732009f971ef25a8dcf54189d050",
      "frame_index": 221,
      "category": "special",
      "pack_version": 3
    },
    {
      "municipality_slug": "birmingham",
      "district_code": "B2",
      "topic": "permitted_uses",
      "body_md": "The B2 family of districts allows broad retail plus dwellings: multiple-family, and one- and two-family with conditions. Live/work units, hotels, and theaters (with use-specific standards) are also allowed.\n\nSpecial land uses include on-premise alcohol, auto sales agencies, drive-ins, gas stations, and funeral homes (§ 2.29); the **City Commission** decides those after Planning Board review (§§ 7.33-7.34). Note: auto sales agencies need a special land use permit only in B2; in B2B and B2C they are permitted outright. Uses the ordinance designates as regulated uses also need City Commission approval. A use not listed in the district layout is not permitted (§ 1.13).",
      "citation": "§ 1.10; § 1.13; § 2.29; §§ 7.33-7.34",
      "source_url": "https://online.encodeplus.com/regs/birmingham-mi/index.aspx",
      "sort_order": 1,
      "id": "cd2930bb46ffdd4999a689b7a2f2b45f530e99ccea84fc4f7e171d4374bb1fc9",
      "frame_index": 229,
      "category": "commercial",
      "pack_version": 3
    },
    {
      "municipality_slug": "birmingham",
      "district_code": "R1",
      "topic": "special_land_uses",
      "body_md": "Special land uses in this district include religious institutions, private schools, assisted living, independent senior living, skilled nursing facilities, philanthropic uses, and public utility buildings.\n\nThe **City Commission** decides special land use permits, after the Planning Board reviews and recommends the site plan and design (§§ 7.33-7.34). Notice is published, mailed to owners within 300 feet, and posted (§ 7.35). A protest petition signed by **20 percent** of owners within 300 feet forces a five-sevenths Commission vote (§ 7.35). The Commission applies six standards (§ 7.36) and records any conditions in its minutes (§ 7.37).",
      "citation": "§ 2.06; §§ 7.33-7.37",
      "source_url": "https://online.encodeplus.com/regs/birmingham-mi/index.aspx",
      "sort_order": 1,
      "id": "22de0c9f98240557a3c60a6c0b588cd14e237dbfe3f1799ddbfb1f0e789c91c6",
      "frame_index": 240,
      "category": "residential",
      "pack_version": 3
    },
    {
      "municipality_slug": "birmingham",
      "district_code": "R8",
      "topic": "lot_size",
      "body_md": "R8 needs **3,000 square feet** of lot area per unit. Rear setback: **20 feet**. Sides: **7 feet** interior, **10 feet** on a corner. Minimum unit floor area: **900 square feet**. Height tops out at **30 feet or 2.5 stories**.",
      "citation": "§§ 2.12-2.20",
      "source_url": "https://online.encodeplus.com/regs/birmingham-mi/index.aspx",
      "sort_order": 1,
      "id": "e6358cdc111b2cf156d1db8901221c39b8df7dc687cdf3d8f97e4bf33b0c2875",
      "frame_index": 271,
      "category": "residential",
      "pack_version": 3
    },
    {
      "municipality_slug": "buckeye-az",
      "district_code": "*",
      "topic": "accessory_structures",
      "body_md": "General accessory uses and structures must be compatible with and complementary to the associated primary structure in building materials and architectural style, except that accessory structures in the R1-43, RR, and AG districts are exempt from architectural character requirements other than color (Sec. 3.3.3). Backyard fowl (up to six hens, no roosters) are allowed for single-family detached residences with a roofed enclosure of up to 200 square feet at least 20 feet from a neighboring property line (Sec. 3.3.4.B). Portable storage containers are capped at 8.5 feet high, 8 feet wide, 40 feet long, and are limited to 7 days per year on residential lots for household moves; permanent storage containers are allowed only in industrial districts, capped at 320 square feet and 10 feet high (Sec. 3.3.4.G). Domesticated farm animals are allowed in AG, R1-43, and R1-18 on lots of at least one-half acre (Sec. 3.3.4.B).",
      "citation": "Sec. 3.3.1; Sec. 3.3.4",
      "source_url": "https://library.municode.com/az/buckeye/codes/code_of_ordinances?nodeId=CD_ORD_CH7DECO_ART3USRE",
      "sort_order": 1,
      "id": "6391d977372b53e4cafff1174e235662884080075e39e2c54edea6b7fce68aa8",
      "frame_index": 278,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "buckeye-az",
      "district_code": "AREOD",
      "topic": "special_land_uses",
      "body_md": "Alternative industrial development standards apply in addition to the underlying base district (generally I-1 or I-2) within the mapped boundary near Southern Avenue, Apache Road, the Union Pacific Railroad, and Rainbow Road, covering building wall materials, landscaping buffers (up to 150 feet along arterials, with a mandatory 50-foot buffer along Watson Road), and wall/fence height and articulation rules distinct from the citywide standards.",
      "citation": "Sec. 2.8.1",
      "source_url": "https://library.municode.com/az/buckeye/codes/code_of_ordinances?nodeId=CD_ORD_CH7DECO_ART2ZODI",
      "sort_order": 1,
      "id": "a3c08d17035d8fb5e81feaad45cbbf7104395be973bb92713285d40359e75a34",
      "frame_index": 289,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "buckeye-az",
      "district_code": "I-1",
      "topic": "setbacks",
      "body_md": "Front/streetside: adjacent to arterial **40 feet**, all others **20 feet**. Side: adjacent to residential district **75 feet**, adjacent to rail right-of-way (blank in the table), all others **20 feet**. Rear: same pattern as side.",
      "citation": "Table 4.1-3",
      "source_url": "https://library.municode.com/az/buckeye/codes/code_of_ordinances?nodeId=CD_ORD_CH7DECO_ART4DIST",
      "sort_order": 1,
      "id": "49c8745a479e16a7655a2d58b2cccddb7ea9fa6fb27cb3fcf6570c4b5e000abd",
      "frame_index": 318,
      "category": "industrial",
      "pack_version": 1
    },
    {
      "municipality_slug": "buckeye-az",
      "district_code": "MF-2",
      "topic": "permitted_uses",
      "body_md": "Multi-family units at urban density in a mid- or high-rise configuration, intended for major corridors and business centers rather than areas adjacent to lower-density single-family development. The full use table is in Table 3.1-1.",
      "citation": "Sec. 2.3.8; Table 3.1-1",
      "source_url": "https://library.municode.com/az/buckeye/codes/code_of_ordinances?nodeId=CD_ORD_CH7DECO_ART2ZODI",
      "sort_order": 1,
      "id": "0f9df4fa6eb11db1f500e65ceaef507035b6259eeb45d258e125e050ff02c2f6",
      "frame_index": 332,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "buckeye-az",
      "district_code": "R1-10",
      "topic": "height",
      "body_md": "Maximum building height **35 feet**.",
      "citation": "Table 4.1-1",
      "source_url": "https://library.municode.com/az/buckeye/codes/code_of_ordinances?nodeId=CD_ORD_CH7DECO_ART4DIST",
      "sort_order": 1,
      "id": "9f35afa8521efeae9fdad0dae4bd0f729dafc224571fbc23b25482acb3b73589",
      "frame_index": 357,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "buda-tx",
      "district_code": "*",
      "topic": "adu",
      "body_md": "Accessory dwellings are permitted by right in AG and R-1 (P-2), require a Specific Use Permit in R-2, R-3, R-4, and R-5 (S-2), are not listed in R-MH, and are permitted in the F3 through F5H form districts (P-25). Conditions: not more than one accessory dwelling per lot; it may be rented or occupied by a guest; it must meet the setbacks of the principal dwelling. In R-2 the SUP is waived when the accessory dwelling sits at least 20 feet behind the front line of the primary structure on a lot at least 100 feet wide and at least 12,000 square feet. Parking is 1 space per unit, and Sec. 2.09.04.B.1 limits a lot to one accessory structure used as living quarters.",
      "citation": "UDC Secs. 2.06.05 (Dwelling, Accessory row) and 2.06.06 condition 2",
      "source_url": "https://ecode360.com/40956541",
      "sort_order": 1,
      "id": "a02bd52e26dd038d390babaf9017473b4a6b8441c1577c187391a37402e79cf9",
      "frame_index": 387,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "buda-tx",
      "district_code": "B-2",
      "topic": "setbacks",
      "body_md": "B-2 setbacks under Sec. 2.07.02: minimum front yard 40 feet, minimum side yard 0 feet interior and 25 feet corner, minimum rear yard 35 feet. A masonry screening wall of six to eight feet is required where a non-single-family use sides or backs to R-1, R-2, or R-3 (Sec. 2.09.02.B.2).",
      "citation": "UDC Sec. 2.07.02, Nonresidential Dimensional Regulations",
      "source_url": "https://ecode360.com/40956704",
      "sort_order": 1,
      "id": "ff615b383d0b85e7a7810a4a8bf7a38b8bd2275fbfb92c9b7fcc5e2908e9707e",
      "frame_index": 403,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "buda-tx",
      "district_code": "B-3",
      "topic": "setbacks",
      "body_md": "B-3 setbacks under Sec. 2.07.02: minimum front yard 50 feet, minimum side yard 0 feet interior and 30 feet corner, minimum rear yard 40 feet.",
      "citation": "UDC Sec. 2.07.02, Nonresidential Dimensional Regulations",
      "source_url": "https://ecode360.com/40956704",
      "sort_order": 1,
      "id": "3e9fefc921bb6085f549bd48986597cacf5071826cbf19efa1217b0cd8c47c19",
      "frame_index": 408,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "buda-tx",
      "district_code": "B-3",
      "topic": "lot_coverage",
      "body_md": "B-3 allows maximum building coverage of 40 percent and maximum impervious coverage of 75 percent, on lots with minimum frontage of 90 feet, minimum width of 180 feet interior and 185 feet corner, and minimum depth of 150 feet (Sec. 2.07.02).",
      "citation": "UDC Sec. 2.07.02, Nonresidential Dimensional Regulations",
      "source_url": "https://ecode360.com/40956704",
      "sort_order": 1,
      "id": "60d2b49f860efa9b947a6bc340cbc53eb34f0e2a4d8e24e72ead9c42dfbf961f",
      "frame_index": 410,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "buda-tx",
      "district_code": "B-3",
      "topic": "parking",
      "body_md": "Minimum parking follows the Use Chart ratio for each use: for example 1 space per 300 square feet for retail and big box, 1 per 200 for restaurants, 1 per 4 seats for cinemas, 1.1 per hotel guest room, and fueling bay spaces plus convenience store parking for gas stations. Stacking spaces per Table 15 apply to drive-thru lanes and car washes. Parking sub-lot, landscaping, and pedestrian walkway standards for large lots are in Sec. 2.09.03.E.",
      "citation": "UDC Secs. 2.06.05 (Use Chart parking column) and 2.09.03",
      "source_url": "https://ecode360.com/40957182",
      "sort_order": 1,
      "id": "d08a9ba48669c14d6d2f8e79fa7a7c9d22e91ef75042119ff774723600251b49",
      "frame_index": 411,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "buda-tx",
      "district_code": "F3",
      "topic": "permitted_uses",
      "body_md": "The F3 column of the Use Chart permits by right, among others: single family detached dwellings (P-25), duplexes (P-25), multiplexes (P-26), accessory dwellings (P-25), short-term residential rentals (P-7), home-based businesses (P-18), bed and breakfast inns, art galleries, career schools, churches, schools, and parks. Small commercial such as artisan's studios, banks (S-11), and daycare are Specific Use Permit items. Building placement and form follow the Form Based Code; multiplexes must follow the Sec. 2.08.07 building types with no accessory dwelling units (condition 26).",
      "citation": "UDC Secs. 2.05.05 and 2.06.05 (Use Chart, F3 column)",
      "source_url": "https://ecode360.com/40956540",
      "sort_order": 1,
      "id": "7d04c562fa889248fb58eb4d605349cb00a542f8f2e21208a28ec6a7a8df17a3",
      "frame_index": 415,
      "category": "mixed",
      "pack_version": 1
    },
    {
      "municipality_slug": "buda-tx",
      "district_code": "F3",
      "topic": "height",
      "body_md": "Heights and lot standards in F3 are set per building type in the Form Based Code rather than one district-wide figure; for example the single family detached building type in F3 requires a minimum lot area of 6,000 square feet and a minimum interior lot width of 55 feet. Read the Sec. 2.08.07 building type sheets and the regulating plan for the parcel before design.",
      "citation": "UDC Secs. 2.08.03, 2.08.06, and 2.08.07",
      "source_url": "https://ecode360.com/40956897",
      "sort_order": 1,
      "id": "622e6427a04156a4bd6e023232c94206ac7133ac468c045f4fbcf7f9e62b50b0",
      "frame_index": 416,
      "category": "mixed",
      "pack_version": 1
    },
    {
      "municipality_slug": "buda-tx",
      "district_code": "O-H",
      "topic": "permitted_uses",
      "body_md": "O-H preserves historic sites, structures, and landmarks; each individual overlay carries specific standards. Designation and development in the overlay, including review procedures, follow Sec. 2.10.10. Mixed use buildings inside the Historic Overlay have their own Use Chart row limited to the F4H, F5, and F5H columns. Confirm certificate-of-appropriateness style requirements with Development Services before exterior work on a property in O-H.",
      "citation": "UDC Secs. 2.05.03 and 2.10.10",
      "source_url": "https://ecode360.com/40958085",
      "sort_order": 1,
      "id": "80a40dd8bab722d1339397f63f9459a381ecc9ec6b2d9e17b68bd6470e39b523",
      "frame_index": 438,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "buda-tx",
      "district_code": "R-2",
      "topic": "permitted_uses",
      "body_md": "The R-2 column of the Use Chart permits by right, among others: single family detached dwellings, modular homes (P-6), short-term residential rentals (P-7), agricultural uses (P-10), home-based businesses (P-18), churches, schools, libraries, and parks. An accessory dwelling is S-2: it needs a Specific Use Permit unless it is at least 20 feet behind the front line of the primary structure on a lot at least 100 feet wide and at least 12,000 square feet (Sec. 2.06.06 condition 2.d). Bed and breakfast inns and transient food trucks on qualifying properties carry their own conditions.",
      "citation": "UDC Secs. 2.03.03 and 2.06.05 (Use Chart)",
      "source_url": "https://ecode360.com/40956540",
      "sort_order": 1,
      "id": "1eab1bc5223ae8aac24c5781dabdcebe72a052ec2acb6a0bf0842b1ce4dd6e4b",
      "frame_index": 447,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "buda-tx",
      "district_code": "R-MH",
      "topic": "lot_size",
      "body_md": "R-MH requires a minimum lot area of 7,500 square feet, minimum lot frontage of 40 feet, minimum lot width of 55 feet interior and 60 feet corner, and no minimum lot depth (Sec. 2.07.01).",
      "citation": "UDC Sec. 2.07.01, Residential Dimensional Regulations",
      "source_url": "https://ecode360.com/40956703",
      "sort_order": 1,
      "id": "6507443de0d088ae77afa20915f37d507eac090ff39d61a5e1862a9cedd8a790",
      "frame_index": 471,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "canton-township",
      "district_code": "C-1",
      "topic": "permitted_uses",
      "body_md": "Permitted by right in C-1 (Section 15.02.A): specialty retail such as apparel, bakery, bookstore, convenience grocery, delicatessen, drugstore, flower and gift shop, toy and hobby; personal services including hair salons, alterations, dry cleaning outlets, and licensed massage; professional and medical offices; banks and credit unions; carryout and standard restaurants (delivery only as an accessory); child and adult day care with screened rear or side play areas; planned shopping centers under Section 6.05; fitness centers, dance and music schools, and art studios; veterinary offices; similar uses; and accessory uses.\n\nRequired conditions (Section 15.03.A): retail and service dealings must be direct to customers, no wholesale activity, everything inside a fully enclosed building, and no outside storage. Outdoor display and sidewalk cafes are limited to sidewalk or patio areas shown on the site plan. Buildings and centers follow the village-scale design standards of Section 6.05, which is also where the **5,000 square foot** per-business size threshold lives (Section 6.05.B).",
      "citation": "Section 15.02.A; Section 15.03.A",
      "source_url": "https://library.municode.com/mi/canton_charter_township,_(wayne_co.)/codes/code_of_ordinances?nodeId=PTIILADERE_APXAZO_ART15.00VISHDI",
      "sort_order": 1,
      "id": "ac993d08a8fca07e2923feca80d1ca2e04fbaf11140313e382cffd40bf631510",
      "frame_index": 479,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "canton-township",
      "district_code": "C-2",
      "topic": "height",
      "body_md": "Maximum **3 stories and 35 feet** (Section 26.03).",
      "citation": "Section 26.03",
      "source_url": "https://library.municode.com/mi/canton_charter_township,_(wayne_co.)/codes/code_of_ordinances?nodeId=PTIILADERE_APXAZO_ART26.00SCRE",
      "sort_order": 1,
      "id": "f9cc732c5f76bbb93720acc059b4592121dbd8b2d0d86a08e254b47417fc97a2",
      "frame_index": 488,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "canton-township",
      "district_code": "LI",
      "topic": "setbacks",
      "body_md": "Front: **40 feet**, or **25 feet** on internal roads of a platted industrial park subdivision. Sides: **15 feet** least, **40 feet** total. Rear: **20 feet**. Minimum lot width **60 feet**, or 35 on an approved private road (Section 26.04, footnotes f, g).\n\nWhere the adjacent land is zoned agricultural or residential, a **40 foot** landscaped setback applies with no buildings, loading, drives, storage, or parking in it (Section 26.04, footnote d). Parking is barred from front yards on roads with 100 foot or wider rights-of-way, and loading areas may never occupy a required front yard (Section 26.04, footnote c).",
      "citation": "Section 26.04",
      "source_url": "https://library.municode.com/mi/canton_charter_township,_(wayne_co.)/codes/code_of_ordinances?nodeId=PTIILADERE_APXAZO_ART26.00SCRE",
      "sort_order": 1,
      "id": "416ad3ee16a8499adc3017cc316dac4bc2ec3db5969e062186f73a14dc595aad",
      "frame_index": 512,
      "category": "industrial",
      "pack_version": 1
    },
    {
      "municipality_slug": "canton-township",
      "district_code": "MR",
      "topic": "setbacks",
      "body_md": "Perimeter setbacks: front **50 feet**, rear **60 feet**, sides **60 feet** each with **120 feet** total (Section 26.02).\n\nBuilding separation inside a site (Section 6.03.A.2): **30 feet** side to side and **80 feet** rear to rear for 1 and 2 story buildings, 40 and 100 feet for 3 story buildings, 60 feet side to rear, and never less than 30 feet between buildings. Buildings are capped at **150 feet** in length (Section 6.03.A.1). Multiple-family developments need access to a road with a right-of-way over 60 feet (Section 6.03.A.4).",
      "citation": "Section 26.02; Section 6.03.A",
      "source_url": "https://library.municode.com/mi/canton_charter_township,_(wayne_co.)/codes/code_of_ordinances?nodeId=PTIILADERE_APXAZO_ART26.00SCRE",
      "sort_order": 1,
      "id": "e3c9661c535b604c20b0530231b75a6c7eade10e38cf0f690e0f55d147f54117",
      "frame_index": 523,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "canton-township",
      "district_code": "R-4",
      "topic": "lot_coverage",
      "body_md": "The Schedule of Regulations sets no maximum lot coverage percentage for this district; Canton Township controls bulk through setbacks and floor rules instead (Section 26.02). The practical caps: accessory buildings may not exceed 25 percent of the rear and side yards (Section 2.03.D.1), decks and terraces must leave 25 feet of open rear yard (Section 2.09.A.3.b), and paved parking may not exceed 50 percent of the front yard (Section 4.01.B.2). This is a reading of what the schedule does not contain, so confirm site-specific limits with Planning Services.",
      "citation": "Section 26.02; Section 2.03.D.1",
      "source_url": "https://library.municode.com/mi/canton_charter_township,_(wayne_co.)/codes/code_of_ordinances?nodeId=PTIILADERE_APXAZO_ART26.00SCRE",
      "sort_order": 1,
      "id": "55fe477ea41060fe876528169050fcdbbb5e2f5603983ce3ca93c51e65bd6f02",
      "frame_index": 561,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "canton-township",
      "district_code": "RA",
      "topic": "height",
      "body_md": "Maximum **3 stories and 35 feet** for a dwelling (Section 26.02). Accessory farm buildings on a bona fide farm may reach **45 feet**, and silos **100 feet**, if kept 100 feet from any off-site dwelling (Section 2.03.D.2). Chimneys, religious institution spires, and similar features may exceed the cap by up to 20 feet with added setbacks (Section 2.16.C).",
      "citation": "Section 26.02; Section 2.03.D.2; Section 2.16.C",
      "source_url": "https://library.municode.com/mi/canton_charter_township,_(wayne_co.)/codes/code_of_ordinances?nodeId=PTIILADERE_APXAZO_ART26.00SCRE",
      "sort_order": 1,
      "id": "04bb8ae5a28dda09614bbd05ae882ad4feae74b2a1caf8bbb8ce83ebdea941a8",
      "frame_index": 577,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "canton-township",
      "district_code": "RR",
      "topic": "permitted_uses",
      "body_md": "RE and RR share the single-family use list (Section 10.02.A): everything permitted in R-1 through R-5 under Section 11.02.A, which means single-family detached homes and site condominiums, public parks, homeowners' association parks, Class A mobile homes (Section 2.05.B), family day care homes (Section 6.02.E), and accessory uses under Section 2.03. The districts add idle cropland and religious institutions by right (Section 10.02.A).\n\nGeneral farming and livestock keeping are not in the RE or RR permitted use lists; they belong to the RA district (Section 9.02.A). Nurseries and tree farms are available only as special land uses (Section 10.02.B.9). A use not named in any district list may be allowed only through the Planning Official's similar-use determination under Section 2.08.",
      "citation": "Section 10.02.A; Section 11.02.A",
      "source_url": "https://library.municode.com/mi/canton_charter_township,_(wayne_co.)/codes/code_of_ordinances?nodeId=PTIILADERE_APXAZO_ART10.00REREESDIRRRUREDI",
      "sort_order": 1,
      "id": "c7e50185f898004e6b51ec2b076dcd57e7f45068aef51bf6850f8e8bec03fbd3",
      "frame_index": 591,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "canton-township",
      "district_code": "RR",
      "topic": "lot_size",
      "body_md": "A lot in this district needs at least **5 acres** of gross area and **250 feet** of width (Section 26.02). A new house needs at least **1,800 square feet** of floor area with a basement or **2,000 square feet** without one (Section 26.02). Minimum lot depth is 120 feet, and depth may not exceed four times the width (Section 26.02, footnote b). A nonconforming lot of record may still be built on with a conforming use and structure if it can be reasonably developed, does not significantly harm surroundings, and meets all setback requirements (Section 3.05.A). Contiguous undersized lots under the same ownership are treated as one parcel, though the Planning Commission can waive the merger for platted lots with public utilities (Section 3.05.C).",
      "citation": "Section 26.02",
      "source_url": "https://library.municode.com/mi/canton_charter_township,_(wayne_co.)/codes/code_of_ordinances?nodeId=PTIILADERE_APXAZO_ART26.00SCRE",
      "sort_order": 1,
      "id": "b9146e6354ef501ebc9f8e2f0fadbce0c0566a2c3c8b5b9287c7756b5cc59167",
      "frame_index": 596,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "cape-coral-fl",
      "district_code": "I",
      "topic": "lot_coverage",
      "body_md": "Controlled through the maximum floor area ratio of **1** rather than a percentage lot coverage figure (Table 4.1.3.B).",
      "citation": "Table 4.1.3.B",
      "source_url": "https://library.municode.com/fl/cape_coral/codes/code_of_ordinances?nodeId=ART4ZODI_CH1GEPR_S4.1.3ZODIDEDIST",
      "sort_order": 1,
      "id": "5405341acd57889dfb6260ef32d8f5226a86517d8fa630c693f30551b7d36b4a",
      "frame_index": 626,
      "category": "industrial",
      "pack_version": 1
    },
    {
      "municipality_slug": "cape-coral-fl",
      "district_code": "P",
      "topic": "setbacks",
      "body_md": "Front: **6 feet**. Side: **None**. Rear: **10 feet**. Double frontage: **10 feet**. Corner lot side: **6 feet**. No maximum height is listed for P in Table 4.1.3.B ('None').",
      "citation": "Table 4.1.3.B",
      "source_url": "https://library.municode.com/fl/cape_coral/codes/code_of_ordinances?nodeId=ART4ZODI_CH1GEPR_S4.1.3ZODIDEDIST",
      "sort_order": 1,
      "id": "ed8457a1a192283c2cca3529635303459d5b2d2ee7e9b476b70a2371176ad6c6",
      "frame_index": 649,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "cape-coral-fl",
      "district_code": "P",
      "topic": "height",
      "body_md": "No maximum height is listed for the P district in Table 4.1.3.B (shown as 'None'). Confirm whether an overlay, PUD condition, or airport height zoning applies to the specific parcel.",
      "citation": "Table 4.1.3.B",
      "source_url": "https://library.municode.com/fl/cape_coral/codes/code_of_ordinances?nodeId=ART4ZODI_CH1GEPR_S4.1.3ZODIDEDIST",
      "sort_order": 1,
      "id": "73736deedcf93cbbbb65771cba0470499c63aaa170a54f227972f6612027f286",
      "frame_index": 650,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "cape-coral-fl",
      "district_code": "RML",
      "topic": "permitted_uses",
      "body_md": "Single-family detached homes are permitted by right. Duplexes are permitted with specific regulations (P*, Sec. 5.10.3). Multi-family and single-family attached (3+ units) are conditional uses. Single-family semi-detached is permitted with specific regulations. Home-based businesses are a conditional use (Table 4.1.6; Sec. 5.11.10). Other use types are review-gated pending full table verification.",
      "citation": "Table 4.1.6; Sec. 4.2.2",
      "source_url": "https://library.municode.com/fl/cape_coral/codes/code_of_ordinances?nodeId=ART4ZODI_CH1GEPR_S4.1.3ZODIDEDIST",
      "sort_order": 1,
      "id": "dd8333a159e8118ec3afe3bbe172c879c9ba50f141eb2a95cfa6203432e0af44",
      "frame_index": 674,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "cedar-park-tx",
      "district_code": "ES",
      "topic": "lot_coverage",
      "body_md": "The residential chart sets no maximum lot coverage for ES; it sets a minimum living area of 4,000 square feet instead (Table 11.03.061A). Established-neighborhood rebuilds may match the prior building coverage (Sec. 11.03.033).",
      "citation": "Table 11.03.061A",
      "source_url": "https://ecode360.com/38612844",
      "sort_order": 1,
      "id": "0c146679d3dc9d9785730251447398dd52f5560c4c224b448a91d3273bd1aed8",
      "frame_index": 707,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "cedar-park-tx",
      "district_code": "GB",
      "topic": "signs",
      "body_md": "Signs are regulated by Chapter 13, Sign Regulations; GB has its own column in most sign-type tables with generally larger allowances than NB and LB. Sign permits are required under Article 13.05 unless a type is expressly exempt.",
      "citation": "Chapter 13; Sec. 13.05.001",
      "source_url": "https://ecode360.com/38619716",
      "sort_order": 1,
      "id": "140ed99baaebde1bc800d677509cd208dfc6d216bb7e1e2fd4fb80f757e54734",
      "frame_index": 714,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "cedar-park-tx",
      "district_code": "HC",
      "topic": "lot_size",
      "body_md": "Minimum lot area **43,560 square feet** (one acre), minimum lot width **200 feet**, minimum lot depth **200 feet** (Table 11.03.091).",
      "citation": "Table 11.03.091",
      "source_url": "https://ecode360.com/38612863",
      "sort_order": 1,
      "id": "386f927786bc308cab60dbf2177d9c07db884c9bbfec9e37311fd59a771f32b8",
      "frame_index": 723,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "cedar-park-tx",
      "district_code": "HC",
      "topic": "signs",
      "body_md": "Signs are regulated by Chapter 13, Sign Regulations; HC is grouped with LI in most sign-type tables. Sign permits are required under Article 13.05 unless a type is expressly exempt.",
      "citation": "Chapter 13; Sec. 13.05.001",
      "source_url": "https://ecode360.com/38619716",
      "sort_order": 1,
      "id": "59d71375e414e4caaec8eba95d43910b7e63262015eedbb9b31f827de9384dd8",
      "frame_index": 725,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "cedar-park-tx",
      "district_code": "LB",
      "topic": "height",
      "body_md": "Maximum building height **45 feet**, but no portion of a building within 100 feet of a single-family residential district property line may exceed 35 feet (Table 11.03.091 and note 1).",
      "citation": "Table 11.03.091 note 1",
      "source_url": "https://ecode360.com/38612863",
      "sort_order": 1,
      "id": "334244baae6fd982e3362bdb20909482188f943e7e59119bf1505aeee1fff5cd",
      "frame_index": 733,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "cedar-park-tx",
      "district_code": "MU",
      "topic": "parking",
      "body_md": "Off-street parking follows Sec. 14.05.005: apartments 1 space per efficiency, 1.5 for the first bedroom plus 0.5 per additional bedroom; retail 1 per 250 square feet; office 1 per 300; restaurant 1 per 100.",
      "citation": "Sec. 14.05.005",
      "source_url": "https://ecode360.com/38625187",
      "sort_order": 1,
      "id": "c62ed0a383e0c538b599529a62204fdf750b4dfc21c95493abc9946ba6621c7e",
      "frame_index": 751,
      "category": "mixed",
      "pack_version": 1
    },
    {
      "municipality_slug": "cedar-park-tx",
      "district_code": "OG",
      "topic": "setbacks",
      "body_md": "Lot area, width, depth, and building height are listed as not applicable for OG. Building setbacks: front **25 feet**, interior side **10 feet**, street side **10 feet**, rear **10 feet** to a property line and **10 feet** to street right-of-way (Table 11.03.091).",
      "citation": "Table 11.03.091",
      "source_url": "https://ecode360.com/38612863",
      "sort_order": 1,
      "id": "28f8f4f33eb74e16d61a26cee5aeec9086f129e2eb574c45a7ab9ce1d8157629",
      "frame_index": 760,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "cedar-park-tx",
      "district_code": "PS",
      "topic": "setbacks",
      "body_md": "Front **25 feet**, interior side **12 feet**, street side **25 feet**, rear **15 feet** to a property line and **20 feet** to street right-of-way, and **30 feet** from an ES, SR, or SU district boundary (Table 11.03.091). Outdoor storage may occupy up to 50 percent of the site.",
      "citation": "Table 11.03.091",
      "source_url": "https://ecode360.com/38612863",
      "sort_order": 1,
      "id": "7aa87637a60ab92e7abc0b835a92734993e017a2ae556196a3dfea6c96a38b38",
      "frame_index": 773,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "celina-tx",
      "district_code": "C",
      "topic": "setbacks",
      "body_md": "Minimum front yard **20 feet**. Other setbacks (adjacent to single-family or other district types) follow the citywide non-residential adjacency tables in Sec. 14.02.401(c)(2)-(3): 40 feet (1-2 story) to 100 feet (4+ story) next to single-family, or 10 feet next to non-single-family districts.",
      "citation": "Sec. 14.02.403(b); Sec. 14.02.401(c)(2)-(3)",
      "source_url": "https://www.celina-tx.gov/DocumentCenter/View/6218/Zoning-Ordinance---Amended-81324",
      "sort_order": 1,
      "id": "9702c31d098c66a2ac9f739856517fe20a87f33e7ea1f1c3cb8594a90c9cad67",
      "frame_index": 807,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "celina-tx",
      "district_code": "DNTO",
      "topic": "height",
      "body_md": "High-Rise subzone: no maximum height, **4-story minimum** (the Director may approve less than 4 stories as part of a larger mixed-use or office tower project). Suburban subzone: **6-story maximum**, 1-story minimum.",
      "citation": "Sec. 14.02.503(f)(2), Table 2",
      "source_url": "https://www.celina-tx.gov/DocumentCenter/View/6218/Zoning-Ordinance---Amended-81324",
      "sort_order": 1,
      "id": "67c49b815b04ed51b9fd8f8b7651cb2fd826bcac2cb9d6e78d16c68fdd165b3a",
      "frame_index": 820,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "celina-tx",
      "district_code": "MF-2",
      "topic": "permitted_uses",
      "body_md": "Apartments in a more urban, mid-density development, typically near major intersections such as the Dallas North Tollway (Sec. 14.02.303(a)-(b)). Should not be sited adjacent to single-family districts without spatial buffering. Multi-family uses generally are permitted, prohibited, or conditioned per the non-residential schedule of uses in Sec. 14.03.102. Accessory dwelling units are prohibited in MF-2 (Sec. 14.03.202(a)(2)).",
      "citation": "Sec. 14.02.301; Sec. 14.02.303; Sec. 14.03.102",
      "source_url": "https://www.celina-tx.gov/DocumentCenter/View/6218/Zoning-Ordinance---Amended-81324",
      "sort_order": 1,
      "id": "0e97fa9213c594fffca3744b690954e6e8b4ca6f14f7e5aedc270986e5d13969",
      "frame_index": 831,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "celina-tx",
      "district_code": "MF-2",
      "topic": "lot_size",
      "body_md": "Maximum density **28 units/acre**. No separate minimum lot area figure is given for MF-2 beyond the density cap and required 20 percent open space of gross acreage (Sec. 14.02.301(c)(4)).",
      "citation": "Sec. 14.02.303(c)(1)",
      "source_url": "https://www.celina-tx.gov/DocumentCenter/View/6218/Zoning-Ordinance---Amended-81324",
      "sort_order": 1,
      "id": "30f40261cd4e60e0de8d3c8160b63c93779010e06bda6a501b098a8256805c57",
      "frame_index": 835,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "celina-tx",
      "district_code": "PD",
      "topic": "permitted_uses",
      "body_md": "A Planned Development may contain any use or combination of uses permitted in the zoning districts and use regulations articles, but conforms to the standards in its own adopting ordinance, illustrated by a Concept Plan, unless that ordinance is silent, in which case the Zoning Ordinance applies (Sec. 14.02.501(b)-(c)). If the underlying base district's standards are later amended by a text amendment, the most recently amended standards apply to the PD at time of development (Sec. 14.02.501(f)(1)). Always get the specific numbered PD's adopting ordinance; do not assume base district rules control.",
      "citation": "Sec. 14.02.501",
      "source_url": "https://www.celina-tx.gov/DocumentCenter/View/6218/Zoning-Ordinance---Amended-81324",
      "sort_order": 1,
      "id": "1f315c8e05a4ec347044385203ea990edfe0a667aa4520deb0184f07cb1808c5",
      "frame_index": 852,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "celina-tx",
      "district_code": "SF-M",
      "topic": "setbacks",
      "body_md": "Front yard: **25 feet**. Side yard: **5 feet** (15 feet on a corner). Rear yard: **10 feet**.",
      "citation": "Sec. 14.02.205, Table 4",
      "source_url": "https://www.celina-tx.gov/DocumentCenter/View/6218/Zoning-Ordinance---Amended-81324",
      "sort_order": 1,
      "id": "c7c6e4012e05a2b306605fa4a907945c8c86b7d1d2fce8c5a343a9eff4e8de8b",
      "frame_index": 869,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "celina-tx",
      "district_code": "SF-R",
      "topic": "lot_coverage",
      "body_md": "No fixed maximum building lot coverage figure is given in the SF-R dimensional table. All residential districts require 20 percent open space citywide, at least half of it 'usable open space' (Sec. 14.02.201(c)(1)). Driveway and other flatwork paving is separately capped at 20 percent of total lot coverage (Sec. 14.03.202(c)(7)). Exact building lot coverage figure review-gated; confirm with Development Services.",
      "citation": "Sec. 14.02.201(c)(1)",
      "source_url": "https://www.celina-tx.gov/DocumentCenter/View/6218/Zoning-Ordinance---Amended-81324",
      "sort_order": 1,
      "id": "f3229172cbd4f0da690ee01f078bf962e8da09b45faac0fc6603cf96ed2df2a0",
      "frame_index": 875,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "columbia-tn",
      "district_code": "*",
      "topic": "adu",
      "body_md": "Accessory Dwellings are allowed where Table 4.3.9.A-2 designates them for the district, subject to the Section 4.3.9 standards: only one Accessory Dwelling per lot or building site; it must be accessory to a House or Townhouse used for household living; if detached, it must be at least 10 feet from the primary dwelling; habitable space is capped at 600 sq ft in all districts except CD-2, where the cap is 1,000 sq ft; and it must share ownership and utility connections with the primary dwelling. Confirm the district's designation in Table 4.3.9.A-2 and any overlay review before design.",
      "citation": "Section 4.3.9 (Accessory Dwelling standards) and Table 4.3.9.A-2 (Accessory Uses)",
      "source_url": "https://www.columbiatn.gov/DocumentCenter/View/3246/Zoning-Ordinance-4400-April-2025",
      "sort_order": 1,
      "id": "a7cf0c0347af2a22cfc5ffc12fd112fe6d1c03ce4e00b9727868433dca7558a2",
      "frame_index": 879,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "columbia-tn",
      "district_code": "CD-3L",
      "topic": "lot_coverage",
      "body_md": "CD-3L has no numeric impervious surface coverage cap in Table 4.3.1-B (shown as NR, not regulated). Stormwater management under Title 14 Chapter 4 of the municipal code still applies to land disturbance and drainage design.",
      "citation": "Table 4.3.1-B (District Standards), Impervious Surface Coverage row",
      "source_url": "https://www.columbiatn.gov/DocumentCenter/View/3246/Zoning-Ordinance-4400-April-2025",
      "sort_order": 1,
      "id": "9b84bb3d7975ea7f318a5b1546994fe849e39720a944c3e427e59a8613f0f83c",
      "frame_index": 897,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "columbia-tn",
      "district_code": "SD-INT",
      "topic": "permitted_uses",
      "body_md": "SD-INT is the interstate service special district for highway-serving commercial uses such as fuel, lodging, and food near the interchange. Use permissions are assigned in Tables 4.3.9.A-1 to A-3 with P, PL, and CU designations; confirm the exact use row and any limitation standards in Section 4.3.9.",
      "citation": "Table 4.3.1-I (District Standards) and Section 4.3.9, Tables 4.3.9.A-1 to A-3",
      "source_url": "https://www.columbiatn.gov/DocumentCenter/View/3246/Zoning-Ordinance-4400-April-2025",
      "sort_order": 1,
      "id": "6e41aa3d916b61229849ec021c6ebf73288c07eab75cee0686bff920975364ec",
      "frame_index": 931,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "concord-nc",
      "district_code": "*",
      "topic": "home_occupation",
      "body_md": "Home occupations must comply with Section 8.5 and the performance standards in Table 8.6-1. The table is snapshotted as article8_home_occupation_table-096.png and article8_home_occupation_table-097.png. Retail sales and listed high impact activities are not permitted as home occupations in residential zoning districts.",
      "citation": "CDO Sec. 8.5 and Table 8.6-1",
      "source_url": "https://apps.concordnc.gov/legacy/planningweb/CDO/Article%208.pdf",
      "sort_order": 1,
      "id": "f36690f1bfe75ae822a4cfd1c7a7c0b0edf32e680ae94e6069b03f9a143a9143",
      "frame_index": 951,
      "category": "special",
      "pack_version": 2
    },
    {
      "municipality_slug": "concord-nc",
      "district_code": "C-1",
      "topic": "permitted_uses",
      "body_md": "Permitted uses are controlled by the Article 8 Use Table snapshots in facts.md. This Stage 2 pack does not guess individual cells from the visually dense table. Treat each use as review gated until the specific row and district column are checked in article8_use_table-004.png through article8_use_table-012.png.",
      "citation": "CDO Table 8.1.8",
      "source_url": "https://apps.concordnc.gov/legacy/planningweb/CDO/Article%208.pdf",
      "sort_order": 1,
      "id": "91a20d616af02d7ed82febd2993cddd586562053c4e7d9afd65243945ffca184",
      "frame_index": 964,
      "category": "commercial",
      "pack_version": 2
    },
    {
      "municipality_slug": "concord-nc",
      "district_code": "C-2",
      "topic": "height",
      "body_md": "Maximum building height is 48 (1) feet per Table 7.6.2 A, subject to height measurement rules, airport overlay limits, exceptions, and transition provisions in Sec. 7.6.2 D to G.",
      "citation": "CDO Table 7.6.2 A; Sec. 7.6.2 D to G",
      "source_url": "https://apps.concordnc.gov/legacy/planningweb/CDO/Article%207.pdf",
      "sort_order": 1,
      "id": "f5603de238bb70c758390722efec7b445855af3359e2d0b0906d670de6558b31",
      "frame_index": 971,
      "category": "commercial",
      "pack_version": 2
    },
    {
      "municipality_slug": "concord-nc",
      "district_code": "CC",
      "topic": "lot_coverage",
      "body_md": "Impervious surface ratio in Table 7.6.2 A is -. A dash means no district-specific value was transcribed from the table and the cell is review gated.",
      "citation": "CDO Table 7.6.2 A",
      "source_url": "https://apps.concordnc.gov/legacy/planningweb/CDO/Article%207.pdf",
      "sort_order": 1,
      "id": "2006d3c4e6abf728182490440b59c0db47721227bbd04e86fba5dd3c364cd88a",
      "frame_index": 978,
      "category": "mixed",
      "pack_version": 2
    },
    {
      "municipality_slug": "concord-nc",
      "district_code": "RL",
      "topic": "setbacks",
      "body_md": "Principal structure setbacks from Table 7.6.2 B: minimum front 35 feet, maximum front -, minimum interior side 15 feet, minimum rear 30 feet. Accessory structure setbacks: minimum interior side 5 feet, minimum rear 5 feet. The source table is visually irregular, so verify against snapshot article7_table-18.png before relying on a cell.",
      "citation": "CDO Table 7.6.2 B",
      "source_url": "https://apps.concordnc.gov/legacy/planningweb/CDO/Article%207.pdf",
      "sort_order": 1,
      "id": "9494a0164768bc78547d80f5feaf900e67348c668c4daed7b2746ec742b3c379",
      "frame_index": 1020,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "concord-nc",
      "district_code": "RM-2",
      "topic": "setbacks",
      "body_md": "Principal structure setbacks from Table 7.6.2 B: minimum front 25 feet, maximum front -, minimum interior side 10 feet, minimum rear 25 feet. Accessory structure setbacks: minimum interior side 5 feet, minimum rear 5 feet. The source table is visually irregular, so verify against snapshot article7_table-18.png before relying on a cell.",
      "citation": "CDO Table 7.6.2 B",
      "source_url": "https://apps.concordnc.gov/legacy/planningweb/CDO/Article%207.pdf",
      "sort_order": 1,
      "id": "ce6b3c559108d6986dbb3ec0d9266971d67e22bc8c337d15666df9194b1e77f0",
      "frame_index": 1030,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "fate-tx",
      "district_code": "A",
      "topic": "lot_coverage",
      "body_md": "Lot coverage and open space for A are controlled by the Agricultural dimensional standards table in facts.md and sources/fate-tx/snapshots/article-iii-page-05.png. Landscaping, parking, screening, drainage, and open space articles can add separate site limits.",
      "citation": "Article III, A dimensional standards",
      "source_url": "https://www.fatetx.gov/DocumentCenter/View/4319/Article-III_Zoning-Districts_Final_20240701",
      "sort_order": 1,
      "id": "2b508f635ee2ffe5e048011fa0272257c698c31134ee6e263780be999a61e428",
      "frame_index": 1052,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "fate-tx",
      "district_code": "IND",
      "topic": "setbacks",
      "body_md": "Setbacks for IND are controlled by the Heavy Industrial dimensional standards table in facts.md and sources/fate-tx/snapshots/article-iii-page-27.png. Check street type, alley or private easement frontage, residential adjacency, pedestrian oriented street status, and any PD or concept plan before using a site layout.",
      "citation": "Article III, IND dimensional standards",
      "source_url": "https://www.fatetx.gov/DocumentCenter/View/4319/Article-III_Zoning-Districts_Final_20240701",
      "sort_order": 1,
      "id": "54821031d086711b33786480143cb808ff6edd36a36d3c1e9ed989b3fac72d74",
      "frame_index": 1060,
      "category": "industrial",
      "pack_version": 1
    },
    {
      "municipality_slug": "fate-tx",
      "district_code": "NT",
      "topic": "permitted_uses",
      "body_md": "Table 4.1-1 controls allowed uses for NT. The table defines by-right uses, Specific Use Permit uses, blank prohibited cells, and additional standards markers. Exact cells for NT are review-gated to sources/fate-tx/snapshots/article-iv-page-03.png through article-iv-page-23.png because PDF text extraction does not preserve all symbols reliably.",
      "citation": "Article IV, Section 36-4.1 Table of Allowed Uses",
      "source_url": "https://www.fatetx.gov/DocumentCenter/View/4320/Article-IV_Use-Standards_adopted-clean_20240701",
      "sort_order": 1,
      "id": "d1fcb46704c4408353cba77065dd53688b1cbb63a03a56d552fa2193dadac399",
      "frame_index": 1094,
      "category": "mixed",
      "pack_version": 1
    },
    {
      "municipality_slug": "fate-tx",
      "district_code": "OTC",
      "topic": "height",
      "body_md": "Height for OTC is controlled by the Old Town Core dimensional standards table in facts.md and sources/fate-tx/snapshots/article-iii-page-46.png. Some special districts include story minimums, foot limits, or SUP paths for additional stories.",
      "citation": "Article III, OTC dimensional standards",
      "source_url": "https://www.fatetx.gov/DocumentCenter/View/4319/Article-III_Zoning-Districts_Final_20240701",
      "sort_order": 1,
      "id": "7dddceb8ee2150db48ca423f708f7e7cd6151141da170e9074721616fca14591",
      "frame_index": 1101,
      "category": "mixed",
      "pack_version": 1
    },
    {
      "municipality_slug": "fate-tx",
      "district_code": "PD",
      "topic": "lot_size",
      "body_md": "Planned Development requires a concept plan, zoning change procedure, and 10 acre minimum. Standards are set through the approved PD. Area values are transcribed from the table area cell in facts.md and sources/fate-tx/snapshots/article-iii-page-49.png, not computed from width and depth.",
      "citation": "Article III, PD dimensional standards",
      "source_url": "https://www.fatetx.gov/DocumentCenter/View/4319/Article-III_Zoning-Districts_Final_20240701",
      "sort_order": 1,
      "id": "703caee380ce69ce0811ee404b5932e37bbc7aa410e85d300faac3a036751876",
      "frame_index": 1108,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "forney-tx",
      "district_code": "2F",
      "topic": "lot_coverage",
      "body_md": "Maximum lot coverage **45 percent**, including main and accessory buildings.",
      "citation": "Sec. 22.4.C",
      "source_url": "https://www.forneytx.gov/DocumentCenter/View/3790/Zoning-Ordinance-2026-2",
      "sort_order": 1,
      "id": "af5a5736ff2a3d2fb71a71ba43e2022cbb5fcbf7e95f6e79a212565233a57695",
      "frame_index": 1188,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "forney-tx",
      "district_code": "CBT",
      "topic": "special_land_uses",
      "body_md": "Base district use and dimensional standards apply (lot size, yards, coverage, FAR, parking are all \"as required in the base zoning district\"); the overlay adds architectural standards intended to visually connect the corridor to the adjacent CBD.",
      "citation": "Sec. 34c",
      "source_url": "https://www.forneytx.gov/DocumentCenter/View/3790/Zoning-Ordinance-2026-2",
      "sort_order": 1,
      "id": "f0951aa27cd444e4b860b5f81232d3175f4b9a51c2d80e89a3981d1b6a2bba2b",
      "frame_index": 1206,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "forney-tx",
      "district_code": "GR",
      "topic": "height",
      "body_md": "Main building(s): **70 feet**; any structure above 36 feet requires a Conditional Use Permit. Accessory buildings: 1 story.",
      "citation": "Sec. 29.3",
      "source_url": "https://www.forneytx.gov/DocumentCenter/View/3790/Zoning-Ordinance-2026-2",
      "sort_order": 1,
      "id": "bff3fa8eea6fd1e6058707b28f2fd5f8c088adc202548e6180221a4a104282b8",
      "frame_index": 1211,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "forney-tx",
      "district_code": "HOZ",
      "topic": "special_land_uses",
      "body_md": "Base district regulations apply except where HOZ standards conflict, in which case HOZ controls (Sec. 34e.2). Property in the original HOZ boundary (Exhibit A) may not be removed from the overlay, and once added, later-included property also cannot be removed.",
      "citation": "Sec. 34e",
      "source_url": "https://www.forneytx.gov/DocumentCenter/View/3790/Zoning-Ordinance-2026-2",
      "sort_order": 1,
      "id": "26f4c82d9deff46128b6e2b81429ba5bdb46a770a3daf2605d9a591d3dfd1b1d",
      "frame_index": 1214,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "forney-tx",
      "district_code": "LI",
      "topic": "lot_coverage",
      "body_md": "Maximum lot coverage **60 percent** (main and accessory buildings); maximum **90 percent** impervious coverage. Maximum floor-area-ratio **2:1**. Open storage limited to 20 percent of total lot area, screened from view (Sec. 33.5.E).",
      "citation": "Sec. 33.4.C, D",
      "source_url": "https://www.forneytx.gov/DocumentCenter/View/3790/Zoning-Ordinance-2026-2",
      "sort_order": 1,
      "id": "531702964cc749fd8ee278b50803e661291b9e3508ac3399a17b7a06a95f9273",
      "frame_index": 1218,
      "category": "industrial",
      "pack_version": 1
    },
    {
      "municipality_slug": "forney-tx",
      "district_code": "MF-15",
      "topic": "lot_coverage",
      "body_md": "Maximum lot coverage **45 percent** total, including main and accessory buildings.",
      "citation": "Sec. 24.4.D",
      "source_url": "https://www.forneytx.gov/DocumentCenter/View/3790/Zoning-Ordinance-2026-2",
      "sort_order": 1,
      "id": "88650b5e637f1f74df2573e95d75ec0ca33e29083dd85eba851bac690b7fe835",
      "frame_index": 1223,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "forney-tx",
      "district_code": "MU",
      "topic": "height",
      "body_md": "Main building(s): **70 feet**; any structure above 36 feet requires a Conditional Use Permit. Accessory buildings: 1 story.",
      "citation": "Sec. 32.3",
      "source_url": "https://www.forneytx.gov/DocumentCenter/View/3790/Zoning-Ordinance-2026-2",
      "sort_order": 1,
      "id": "fb8ce7b7ff754c43e9651e107e1f7f0390aae5862f316a6db5f44337f0ae6c0b",
      "frame_index": 1234,
      "category": "mixed",
      "pack_version": 1
    },
    {
      "municipality_slug": "forney-tx",
      "district_code": "SF-15",
      "topic": "height",
      "body_md": "Main building/house: **2.5 stories, not to exceed 36 feet**.",
      "citation": "Sec. 17.3",
      "source_url": "https://www.forneytx.gov/DocumentCenter/View/3790/Zoning-Ordinance-2026-2",
      "sort_order": 1,
      "id": "e239083173faf9c6619ce6f9671540daa65ca9c73c4d4e10eb34e9a7e924a816",
      "frame_index": 1260,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "forney-tx",
      "district_code": "SF-6",
      "topic": "permitted_uses",
      "body_md": "Single-family detached homes. Creation of new SF-6 area is not anticipated; the district continues to govern property already zoned and platted SF-6 (Sec. 20.1).",
      "citation": "Sec. 20.2; Sec. 37.2",
      "source_url": "https://www.forneytx.gov/DocumentCenter/View/3790/Zoning-Ordinance-2026-2",
      "sort_order": 1,
      "id": "5253534fe8f79c7b7a30ab6792b6f09cc94c8f3c4f09b5e907ea4ebe7bea9e36",
      "frame_index": 1268,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "franklin-tn",
      "district_code": "1ST",
      "topic": "special_land_uses",
      "body_md": "Franklin distinguishes uses permitted by right from uses permitted with additional use regulations in the Section 5.1.3 table. The pack does not infer permission for unlisted uses; use the table and the applicable Section 5.1.4 use-specific standard, then confirm close calls with Planning.",
      "citation": "Sections 5.1.1, 5.1.3, 20.2",
      "source_url": "https://web.franklintn.gov/FlippingBook/FranklinZoningOrdinance/85/",
      "sort_order": 2,
      "id": "f8d1e741d0b15d010aa5523bf8c695b15826f8f70a447e1c651649bac79c9a06",
      "frame_index": 1298,
      "category": "mixed",
      "pack_version": 2
    },
    {
      "municipality_slug": "franklin-tn",
      "district_code": "HI",
      "topic": "lot_coverage",
      "body_md": "The HI table uses landscape surface area rather than a simple lot-coverage number: minimum landscape surface area is 20% (Section 3.23.5).",
      "citation": "Section 3.23.5",
      "source_url": "https://web.franklintn.gov/FlippingBook/FranklinZoningOrdinance/67/",
      "sort_order": 1,
      "id": "36d6411cb73065897f734cdeef5f604fd910b253904cc66b00184149bdf2d680",
      "frame_index": 1348,
      "category": "industrial",
      "pack_version": 2
    },
    {
      "municipality_slug": "franklin-tn",
      "district_code": "MR",
      "topic": "special_land_uses",
      "body_md": "In new MR developments, the first building next to an existing house lot must be a house or duplex unless the houses are in the same development. If townhouses or multiplex units are included, they may not exceed 50 percent of total dwelling units, and the remainder must be a balanced mix of duplexes and houses.",
      "citation": "Section 3.9.5",
      "source_url": "https://web.franklintn.gov/FlippingBook/FranklinZoningOrdinance/36/",
      "sort_order": 1,
      "id": "d7313fcd8c66d36501b71d2d463e82e92aef92c87fe60daa804b7bfe35938450",
      "frame_index": 1357,
      "category": "mixed",
      "pack_version": 2
    },
    {
      "municipality_slug": "franklin-tn",
      "district_code": "MR",
      "topic": "lot_coverage",
      "body_md": "MR uses minimum landscape surface area: 30 percent for houses and multiplexes, and 20 percent for duplexes and townhouses.",
      "citation": "Sections 3.9.6, 3.9.7",
      "source_url": "https://web.franklintn.gov/FlippingBook/FranklinZoningOrdinance/37/",
      "sort_order": 1,
      "id": "a7af8cb088882185e5d9a3ab3b044105611c3f2cd4806dadf9959995c2e07e00",
      "frame_index": 1361,
      "category": "mixed",
      "pack_version": 2
    },
    {
      "municipality_slug": "franklin-tn",
      "district_code": "NC",
      "topic": "lot_size",
      "body_md": "NC lot standards: no fixed minimum lot size, width, or front lot line in the district table (Section 3.13.5).",
      "citation": "Section 3.13.5",
      "source_url": "https://web.franklintn.gov/FlippingBook/FranklinZoningOrdinance/47/",
      "sort_order": 1,
      "id": "8de9cd65bf5190626102efd4892934571aa13367d94cde1c3ea3d08d6ece50e5",
      "frame_index": 1368,
      "category": "commercial",
      "pack_version": 2
    },
    {
      "municipality_slug": "franklin-tn",
      "district_code": "R3",
      "topic": "special_land_uses",
      "body_md": "Franklin distinguishes uses permitted by right from uses permitted with additional use regulations in the Section 5.1.3 table. The pack does not infer permission for unlisted uses; use the table and the applicable Section 5.1.4 use-specific standard, then confirm close calls with Planning.",
      "citation": "Sections 5.1.1, 5.1.3, 20.2",
      "source_url": "https://web.franklintn.gov/FlippingBook/FranklinZoningOrdinance/85/",
      "sort_order": 2,
      "id": "c6afa94edb837f5a25bb125e69be249785cfeff63deb7435aad63b7a3ff3eba7",
      "frame_index": 1391,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "franklin-tn",
      "district_code": "R3",
      "topic": "lot_size",
      "body_md": "R3 lot standards: 9,000 sq ft; 65 ft width; 52 ft front lot line, reducible to 30 ft on cul-de-sac turning radius (Section 3.6.5).",
      "citation": "Section 3.6.5",
      "source_url": "https://web.franklintn.gov/FlippingBook/FranklinZoningOrdinance/31/",
      "sort_order": 1,
      "id": "d797b19b6d7c8fe89eb327b4660331a7a9799825c7577bd6b8dfd8c2a1012917",
      "frame_index": 1395,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "franklin-tn",
      "district_code": "R6",
      "topic": "height",
      "body_md": "R6 maximum principal-building height: contextual street-facing height, never over 2 stories (Section 3.8.5). Accessory-structure height is separately limited in the same section.",
      "citation": "Section 3.8.5",
      "source_url": "https://web.franklintn.gov/FlippingBook/FranklinZoningOrdinance/34-35/",
      "sort_order": 1,
      "id": "2708784a4dad23654686bcb030d238bceaf90e483fb51042bffd541af2711dcc",
      "frame_index": 1405,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "franklin-tn",
      "district_code": "RC4",
      "topic": "special_land_uses",
      "body_md": "Franklin distinguishes uses permitted by right from uses permitted with additional use regulations in the Section 5.1.3 table. The pack does not infer permission for unlisted uses; use the table and the applicable Section 5.1.4 use-specific standard, then confirm close calls with Planning.",
      "citation": "Sections 5.1.1, 5.1.3, 20.2",
      "source_url": "https://web.franklintn.gov/FlippingBook/FranklinZoningOrdinance/85/",
      "sort_order": 2,
      "id": "310a1ee8a2a5441887724f54da74189f978a3e94006439f67ed17999f1a067d6",
      "frame_index": 1415,
      "category": "commercial",
      "pack_version": 2
    },
    {
      "municipality_slug": "franklin-tn",
      "district_code": "RC6",
      "topic": "special_land_uses",
      "body_md": "Franklin distinguishes uses permitted by right from uses permitted with additional use regulations in the Section 5.1.3 table. The pack does not infer permission for unlisted uses; use the table and the applicable Section 5.1.4 use-specific standard, then confirm close calls with Planning.",
      "citation": "Sections 5.1.1, 5.1.3, 20.2",
      "source_url": "https://web.franklintn.gov/FlippingBook/FranklinZoningOrdinance/85/",
      "sort_order": 2,
      "id": "841e9436aa799d22d0c3b6d7ffea2680334a493daa093a836a686782ca039e40",
      "frame_index": 1421,
      "category": "commercial",
      "pack_version": 2
    },
    {
      "municipality_slug": "franklin-tn",
      "district_code": "RC6",
      "topic": "lot_coverage",
      "body_md": "The RC6 table uses landscape surface area rather than a simple lot-coverage number: minimum landscape surface area is 15% (Section 3.19.5).",
      "citation": "Section 3.19.5",
      "source_url": "https://web.franklintn.gov/FlippingBook/FranklinZoningOrdinance/59/",
      "sort_order": 1,
      "id": "f05585fb110d01339814beb06477223e0bf542a01cad70f5e85e535cef040153",
      "frame_index": 1424,
      "category": "commercial",
      "pack_version": 2
    },
    {
      "municipality_slug": "frisco-tx",
      "district_code": "*",
      "topic": "permitted_uses",
      "body_md": "Frisco uses a single citywide Use Chart in Subsection 3.02: land and buildings in each zoning district may be used only for uses marked as permitted (by right or with supplementary standards) or by Specific Use Permit in that district's column; anything not marked as allowed is prohibited absent a rezoning or SUP. This session fetched the full Use Chart directly (a single 40-column table spanning residential, nonresidential, and special/overlay districts) and confirmed the P/S/blank mechanism firsthand. A claim in an earlier version of this pack that beer sales are not permitted in residential zoning districts was not independently re-confirmed as isolated table text within the portion of the chart reviewed this session; treat that specific claim as still resting on the original WebSearch snippet rather than this session's direct fetch. The full use-by-use grid for every listed use type was not individually catalogued row by row in this pack; do not assume a use is allowed or prohibited in a specific district without confirming the current Sec. 3.02 chart directly.",
      "citation": "Subsection 3.01 (Use of Land and Buildings); Subsection 3.02 (Use Chart)",
      "source_url": "https://ecode360.com/45144913",
      "sort_order": 1,
      "id": "c280d791868f25b9edac57dcef74244919a3c39f308790aeb6953412e659ae80",
      "frame_index": 1426,
      "category": "special",
      "pack_version": 2
    },
    {
      "municipality_slug": "frisco-tx",
      "district_code": "*",
      "topic": "signs",
      "body_md": "Sign regulation is in a separate chapter of the Frisco Code of Ordinances, Chapter 70 (Signs), not in the Chapter 63 Zoning Ordinance. A sign permit from the building official is required for any sign except those exempted under Sec. 70-17. In residential zoning districts, a Monument (Residential) Sign requires a permit and may be placed on private property only at subdivision entrances; it may not be issued before a building permit or certificate of occupancy for the subdivision. Model homes may display one monument sign of no more than 32 square feet and 4 feet in height while a valid model home permit is active. Chapter 70 was most recently updated per the City of Frisco Sign Ordinance document available on the city website. Full permitted sign types, size, and height limits by district are review-gated; confirm Chapter 70 directly.",
      "citation": "Chapter 70 (Signs), Sec. 70-17 and following",
      "source_url": "https://ecode360.com/38352258",
      "sort_order": 1,
      "id": "2a88432a7c4ec81047dd3194947732b99cdbc8e0125c6102fdc9c3af1ed73db9",
      "frame_index": 1434,
      "category": "special",
      "pack_version": 2
    },
    {
      "municipality_slug": "frisco-tx",
      "district_code": "I",
      "topic": "lot_size",
      "body_md": "Per the Sec. 2.06.05 Nonresidential Districts Development Standards Chart (fetched directly this session): minimum lot area **43,560 square feet**; minimum lot width **200 feet**; minimum lot depth **200 feet**. Front yard **25 feet**; side yard **15 feet (25 feet on corner lots)**; rear yard **30 feet**; maximum height listed as **None**; maximum lot coverage **80 percent**; maximum FAR listed as **None**. Confirm the current chart before acting.",
      "citation": "Sec. 2.04.09; Sec. 2.06.05",
      "source_url": "https://ecode360.com/45144911",
      "sort_order": 1,
      "id": "02541bd3e5ffce2e24a7ceed537aa42292c0cf3ea6ded30c963f833cb445973b",
      "frame_index": 1441,
      "category": "industrial",
      "pack_version": 2
    },
    {
      "municipality_slug": "frisco-tx",
      "district_code": "IT",
      "topic": "lot_size",
      "body_md": "Minimum district size **25 gross acres**. Per the Sec. 2.06.05 Nonresidential Districts Development Standards Chart (fetched directly this session): minimum front yard **50 feet** (also see Sec. 2.04.08); minimum side yard **15 feet** (also see Sec. 2.04.08); minimum rear yard **30 feet** (also see Sec. 2.04.08); minimum lot area and minimum lot width are both listed as **None**; maximum height **175 feet**; maximum lot coverage **55 percent (70 percent if parking garages are constructed)**; maximum FAR **1:1**. Confirm the cited chart and Sec. 2.04.08 directly before acting.",
      "citation": "Sec. 2.04.08; Sec. 2.06.05",
      "source_url": "https://ecode360.com/45144320",
      "sort_order": 1,
      "id": "01a3627bf8ef291c082ea82452b75c1ba15b45b5266639d18fe0804b81215c02",
      "frame_index": 1442,
      "category": "industrial",
      "pack_version": 2
    },
    {
      "municipality_slug": "frisco-tx",
      "district_code": "SF-16",
      "topic": "lot_size",
      "body_md": "Minimum lot area **16,000 square feet**; minimum lot width **90 feet**; minimum lot depth **140 feet**; minimum dwelling area **800 square feet**, per the Sec. 2.06.04 Residential Districts Development Standards Chart (fetched directly this session). Front yard setback **40 feet**; side yard setback **15 feet (20 feet on corner lots)**; rear yard setback **30 feet**; maximum height **40 feet / 2.5 stories**; maximum lot coverage (all buildings) **30 percent**. Subsection 6.18 (Alternative Compliance Standards) can modify setbacks and heights. Confirm the current chart and any PD or SUP conditions before acting.",
      "citation": "Sec. 2.03.03; Sec. 2.06.04",
      "source_url": "https://ecode360.com/45144096",
      "sort_order": 1,
      "id": "2013f7a800b37ea075d32dbf3840c2dbe3653ecd3961e72b8b3d09cc633497dc",
      "frame_index": 1457,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "frisco-tx",
      "district_code": "SUP",
      "topic": "special_land_uses",
      "body_md": "Sec. 2.05.02 (SUP or \"S\" - Specific Use Permits), confirmed live on eCode360 this session as its own numbered district-level section (distinct from the general Subsection 6.15 SUP application procedure already covered in this pack), establishes the Specific Use Permit as a district-level tool layered on top of a base zoning district rather than a freestanding district. The Use Chart marks a use requiring an SUP with \"S\"; approval requires the Subsection 6.15 process (City Council and Planning & Zoning Commission finding that the use will not be detrimental to adjacent properties or the city as a whole). The city's zoning GIS layer carries a live SUP field per parcel; a non-null value (something other than SUP000) means an SUP has already been granted there. This session did not fetch the full text of Sec. 2.05.02 itself (only its title and existence were confirmed via the Chapter 63 TOC); treat any detail beyond this summary as review-gated. Confirm the current Sec. 2.05.02 text and any recorded SUP for the parcel before acting.",
      "citation": "Sec. 2.05.02",
      "source_url": "https://ecode360.com/45144492",
      "sort_order": 1,
      "id": "5634b177ccbbd10d12a61602d658e4a763cf10bc7d46db3bfcfbfbbb273f47bd",
      "frame_index": 1460,
      "category": "special",
      "pack_version": 2
    },
    {
      "municipality_slug": "fuquay-varina-nc",
      "district_code": "*",
      "topic": "adu",
      "body_md": "An accessory dwelling unit (ADU, formerly called an \"accessory apartment\" before a Town clean-up amendment renamed it) is a permitted accessory use under Sec. 9-1255(m)(1) and is confirmed as \"P\" (permitted) across most residential and mixed-use districts in the Sec. 9-1254 Permitted Use Table read during this review. As of LDO Amendment #26 (2024), an ADU may be rented separately from the principal structure, unlike ordinary accessory structures. This session located the subsection's structure directly in Ordinance No. M-25-09 (Amendment #30, CTA-2025-04, 2025-09-02), which amends other lettered parts of Sec. 9-1255(m)(1) without touching its size cap: the subsection runs A through J, and F. Setbacks confirms the ADU must comply with the applicable district setback requirements under Article G (the same standard as any accessory structure, per Sec. 9-1255(p)(1)(G)(v)). The same ordinance's Table - Parking Standards (Attachment D) confirms an ADU parking requirement of **1 space per unit**. Subsection C, Maximum Size, was not amended by any ordinance located this session and so its specific square-footage or percentage cap was not independently read from primary text; confirm that figure with Sec. 9-1255(m)(1)(C) directly or the Planning Department at 919-552-1429 before building.",
      "citation": "LDO Sec. 9-1255(m)(1) Accessory Dwelling Unit (ADU)",
      "source_url": "https://www.fuquay-varina.org/DocumentCenter/View/6520/Accessory-Structure-User-Guide-PDF",
      "sort_order": 1,
      "id": "a337a818cbf01197902d4a7d447bb8e01536de5eb682e1a564979e3a98f26402",
      "frame_index": 1463,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "fuquay-varina-nc",
      "district_code": "RMD",
      "topic": "lot_size",
      "body_md": "Minimum lot size **10,000 square feet**, minimum lot width **70 feet**. Single-family subdivision lots (not including townhome development) develop at a minimum of 10,000 square feet per lot, or **4.36 dwelling units per gross acre**, while the district's overall maximum density is **6 dwelling units per gross acre** with public utilities (LDO Sec. 9-1151(d), read directly from the flipbook, is the source for the two different density figures).",
      "citation": "LDO Art. G, Sec. 9-1300 Table - Dimensions & Standards, as adopted by Ordinance PZ-19-03 (CTA-2019-01)",
      "source_url": "https://d2kbkoa27fdvtw.cloudfront.net/fuquay-varina/f6b6e6e6e2eb0f1c9c1e3ad9d99a55a10.pdf",
      "sort_order": 1,
      "id": "82d6927cd5f71bcec2403fe71fc0651233c664064e9a0e129e98bbcbab50a1f4",
      "frame_index": 1511,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "gallatin-tn",
      "district_code": "*",
      "topic": "signs",
      "body_md": "Signs are regulated by §13.07 of the Zoning Ordinance together with the city's separately published Sign Ordinance (46-page PDF on the city site). Requirements vary by sign type, district, area, height, and lighting, and most signs need permits. Confirm current requirements with Planning staff before fabricating a sign.",
      "citation": "Article 13, §13.07; separate Sign Ordinance",
      "source_url": "https://gallatintn.gov/DocumentCenter/View/504",
      "sort_order": 1,
      "id": "4e57711eb833d830be8d7a527383fef0744bbbe12ebc34ea8c4c135b492c8e0f",
      "frame_index": 1517,
      "category": "special",
      "pack_version": 3
    },
    {
      "municipality_slug": "gallatin-tn",
      "district_code": "CC",
      "topic": "height",
      "body_md": "CC height is formula-based (§08.01.020.B): the maximum height of a front wall at the street line is **35 ft above curb level**, and the building may rise **1.5 ft for each 1 ft of setback** from the street line. No flat cap is stated.",
      "citation": "Article 8, §08.01.020.B",
      "source_url": "https://gallatintn.gov/DocumentCenter/View/1120",
      "sort_order": 1,
      "id": "ac7d85057dae8e0125dbc910d3652994d908f5a10755e7f529e4b1824187a20b",
      "frame_index": 1526,
      "category": "commercial",
      "pack_version": 3
    },
    {
      "municipality_slug": "gallatin-tn",
      "district_code": "CG",
      "topic": "lot_coverage",
      "body_md": "Maximum lot coverage in CG is **50 percent**; maximum floor area ratio is **2.0** (§08.03.020).",
      "citation": "Article 8, §08.03.020",
      "source_url": "https://gallatintn.gov/DocumentCenter/View/1120",
      "sort_order": 1,
      "id": "71bafd5fb27ea831a4ff2db67e2388bd1ff309127e7cf6db82660f20556035b7",
      "frame_index": 1532,
      "category": "commercial",
      "pack_version": 3
    },
    {
      "municipality_slug": "gallatin-tn",
      "district_code": "CS",
      "topic": "setbacks",
      "body_md": "CS minimum yards (§08.02.030): front **10 ft**, side **10 ft**, rear **20 ft**. Corner lots follow the greater adjoining-street setback; §13.03 bufferyards can add depth next to residential districts; widening-designated roadways follow the future right-of-way line.",
      "citation": "Article 8, §08.02.030",
      "source_url": "https://gallatintn.gov/DocumentCenter/View/1120",
      "sort_order": 1,
      "id": "704e7a2150cbb91b9b49e3138895e9b08f5722935d359180ffee3e884ceaaec0",
      "frame_index": 1535,
      "category": "commercial",
      "pack_version": 3
    },
    {
      "municipality_slug": "gallatin-tn",
      "district_code": "IR",
      "topic": "lot_coverage",
      "body_md": "Maximum lot coverage in IR is **50 percent** (§09.02.020.A). Storage areas must be surfaced, graded, and drained (§09.02.050.D).",
      "citation": "Article 9, §09.02.020.A",
      "source_url": "https://gallatintn.gov/DocumentCenter/View/1121",
      "sort_order": 1,
      "id": "fa9762e99d1bb6511c85b89ead8633cb0b5d6a9391f3f3adb216e4314679b4f9",
      "frame_index": 1552,
      "category": "industrial",
      "pack_version": 3
    },
    {
      "municipality_slug": "gallatin-tn",
      "district_code": "IR",
      "topic": "lot_size",
      "body_md": "IR has **no fixed minimum lot area**: sites must be sized so structures have “architectural unity and flexibility in arrangements” and meet all space requirements (§09.02.030.A). Yards, parking, loading, and buffering effectively size the lot.",
      "citation": "Article 9, §09.02.030.A",
      "source_url": "https://gallatintn.gov/DocumentCenter/View/1121",
      "sort_order": 1,
      "id": "0bfbc4d80a63a19948c63e2b18d3b7f4fb961dc0b128627755810c74635c7541",
      "frame_index": 1553,
      "category": "industrial",
      "pack_version": 3
    },
    {
      "municipality_slug": "gallatin-tn",
      "district_code": "MU",
      "topic": "height",
      "body_md": "Maximum building height in MU is **35 feet** for both residential (§07.03.020) and non-residential (§07.03.30) development.",
      "citation": "Article 7, §07.03.020–.030",
      "source_url": "https://gallatintn.gov/DocumentCenter/View/1119",
      "sort_order": 1,
      "id": "7bfa1b92ce3875f97deb9b22603eba6df74741e6530432693fb4797508e45f10",
      "frame_index": 1566,
      "category": "mixed",
      "pack_version": 3
    },
    {
      "municipality_slug": "gallatin-tn",
      "district_code": "MUG",
      "topic": "height",
      "body_md": "Maximum height in MUG is **35 feet** (§07.04.020.D).",
      "citation": "Article 7, §07.04.020.D",
      "source_url": "https://gallatintn.gov/DocumentCenter/View/1119",
      "sort_order": 1,
      "id": "8cbcd57009d1c0b697ef261f6bce60f7a42e05100a96d43c4a389c72acfb4c38",
      "frame_index": 1571,
      "category": "mixed",
      "pack_version": 3
    },
    {
      "municipality_slug": "gallatin-tn",
      "district_code": "PGC",
      "topic": "lot_coverage",
      "body_md": "Maximum lot coverage in PGC is **50 percent**; maximum floor area ratio is **1.0** (§08.04.040.A).",
      "citation": "Article 8, §08.04.040.A",
      "source_url": "https://gallatintn.gov/DocumentCenter/View/1120",
      "sort_order": 1,
      "id": "47e3a0eb381c5c14f7b8791588056c3a257baa22c3839d6aae57f69a7a8e913c",
      "frame_index": 1587,
      "category": "commercial",
      "pack_version": 3
    },
    {
      "municipality_slug": "gallatin-tn",
      "district_code": "R-08",
      "topic": "lot_size",
      "body_md": "Minimum required lot area in R-08 is **8,000 sq ft (one-family detached)** (§06.07). Minimum lot width at the building line is **55 ft**. Development area per dwelling unit must be at least **7,000 sq ft**; maximum overall site density is **5.5 units per gross acre** (§06.07.030). Townhouse lots sold individually: 5,000 sq ft minimum, 20 ft wide, max 6 attached units, 6,500 sq ft site area per unit (§06.07.062). Corner-lot, planned-development (PRD), and subdivision conditions can add requirements.",
      "citation": "Article 6, §06.07",
      "source_url": "https://gallatintn.gov/DocumentCenter/View/1118",
      "sort_order": 1,
      "id": "c47025e85a7b27f5aa1888697029ef578afe5b61eae4606d5c21bad2f07b4308",
      "frame_index": 1607,
      "category": "residential",
      "pack_version": 3
    },
    {
      "municipality_slug": "georgetown-tx",
      "district_code": "*",
      "topic": "variance_process",
      "body_md": "Georgetown citywide variance process rules may depend on district, use, plat status, permit history, and discretionary approvals. Confirm the current adopted Unified Development Code text and planning staff interpretation before acting. This cell is review gated and should be checked against the live cited source before import or publish.",
      "citation": "UDC Section 3.15 Zoning Variance and Special Exception",
      "source_url": "https://library.municode.com/tx/georgetown/codes/unified_development_code",
      "sort_order": 1,
      "id": "eff516d0a2e62019ebed337c00af5a6b8a4cceee66c5db17d0361ec048bdf5e7",
      "frame_index": 1635,
      "category": "special",
      "pack_version": 3
    },
    {
      "municipality_slug": "georgetown-tx",
      "district_code": "AG",
      "topic": "setbacks",
      "body_md": "Table in UDC Sec. 6.02.020 sets AG minimum setbacks: front 25 ft minimum, side 10 ft minimum, rear 20 ft minimum, side/rear street (corner) 20 ft minimum, street-facing garage 25 ft minimum, unloaded street frontage 20 ft minimum. Confirm dimensional interpretations and exceptions in Section 6.04, overlay status, and any approved development agreement or planned unit development with the Planning Department before relying on this answer.",
      "citation": "UDC Ch. 6 Residential Development Standards (Sec. 6.02.020)",
      "source_url": "https://library.municode.com/tx/georgetown/codes/unified_development_code",
      "sort_order": 1,
      "id": "71cc7b9c34969d503d7b533b49d39819872ecd697966e15cc7bd52a86e06d0f9",
      "frame_index": 1637,
      "category": "special",
      "pack_version": 3
    },
    {
      "municipality_slug": "georgetown-tx",
      "district_code": "C-1",
      "topic": "height",
      "body_md": "Table 7.02.020 sets C-1 maximum building height at 35 ft. Confirm overlay status (the Downtown, Old Town, Gateway, and Courthouse View Protection overlays can further restrict height) and dimensional interpretations in Section 7.02.030 with the Planning Department before relying on this answer.",
      "citation": "UDC Ch. 7 Non-Residential Development Standards (Section 7.02, Table 7.02.020)",
      "source_url": "https://library.municode.com/tx/georgetown/codes/unified_development_code",
      "sort_order": 1,
      "id": "df9d0ba2cb7b33e536c91da7cb958c1fe848f2adc4a678de6700e3bdc62f0c22",
      "frame_index": 1648,
      "category": "commercial",
      "pack_version": 3
    },
    {
      "municipality_slug": "georgetown-tx",
      "district_code": "CN",
      "topic": "permitted_uses",
      "body_md": "CN permitted uses standards are controlled by the current Georgetown Unified Development Code. Confirm the exact use table row, dimensional table, overlay status, parking, landscaping, drainage, utilities, and any approved development agreement or planned approval before relying on this answer. This cell is review gated and should be checked against the live cited source before import or publish.",
      "citation": "UDC Ch. 4 Zoning Districts (Table 4.01.010) and Ch. 5 Zoning Use Regulations (Sections 5.01 to 5.10 use tables)",
      "source_url": "https://library.municode.com/tx/georgetown/codes/unified_development_code",
      "sort_order": 1,
      "id": "9c76d78f31041f8a090b8b2f502a643fde4c0c148f6b961375d1303bcc2c251a",
      "frame_index": 1656,
      "category": "commercial",
      "pack_version": 3
    },
    {
      "municipality_slug": "georgetown-tx",
      "district_code": "IN",
      "topic": "height",
      "body_md": "Table 7.02.020 sets IN maximum building height at 60 ft. Confirm overlay status (the Downtown, Old Town, Gateway, and Courthouse View Protection overlays can further restrict height) and dimensional interpretations in Section 7.02.030 with the Planning Department before relying on this answer.",
      "citation": "UDC Ch. 7 Non-Residential Development Standards (Section 7.02, Table 7.02.020)",
      "source_url": "https://library.municode.com/tx/georgetown/codes/unified_development_code",
      "sort_order": 1,
      "id": "fe7004e2537db2d66e166388a47730cb94a03148117429f4d9bbc80a22875b94",
      "frame_index": 1663,
      "category": "industrial",
      "pack_version": 3
    },
    {
      "municipality_slug": "georgetown-tx",
      "district_code": "MF-2",
      "topic": "permitted_uses",
      "body_md": "MF-2 permitted uses standards are controlled by the current Georgetown Unified Development Code. Confirm the exact use table row, dimensional table, overlay status, parking, landscaping, drainage, utilities, and any approved development agreement or planned approval before relying on this answer. This cell is review gated and should be checked against the live cited source before import or publish.",
      "citation": "UDC Ch. 4 Zoning Districts (Table 4.01.010) and Ch. 5 Zoning Use Regulations (Sections 5.01 to 5.10 use tables)",
      "source_url": "https://library.municode.com/tx/georgetown/codes/unified_development_code",
      "sort_order": 1,
      "id": "c43e68e8552c6006db4b4b59a6a5898c3f7ec783c068ae602983b11abb246dbe",
      "frame_index": 1670,
      "category": "residential",
      "pack_version": 3
    },
    {
      "municipality_slug": "georgetown-tx",
      "district_code": "PUD",
      "topic": "permitted_uses",
      "body_md": "PUD permitted uses standards are controlled by the current Georgetown Unified Development Code. Confirm the exact use table row, dimensional table, overlay status, parking, landscaping, drainage, utilities, and any approved development agreement or planned approval before relying on this answer. This cell is review gated and should be checked against the live cited source before import or publish.",
      "citation": "UDC Section 4.06 Planned Unit Development District and Ch. 5 Zoning Use Regulations",
      "source_url": "https://library.municode.com/tx/georgetown/codes/unified_development_code",
      "sort_order": 1,
      "id": "378c8ba8c91815644f10cf3540af760702a21c1786bf7269efe90c4c1b29d4f4",
      "frame_index": 1699,
      "category": "special",
      "pack_version": 3
    },
    {
      "municipality_slug": "georgetown-tx",
      "district_code": "RL",
      "topic": "setbacks",
      "body_md": "Table in UDC Sec. 6.02.040 sets RL minimum setbacks: front 20 ft minimum, side 10 ft minimum, rear 10 ft minimum, side/rear street (corner) 15 ft minimum, street-facing garage 25 ft minimum, unloaded street frontage 20 ft minimum. Confirm dimensional interpretations and exceptions in Section 6.04, overlay status, and any approved development agreement or planned unit development with the Planning Department before relying on this answer.",
      "citation": "UDC Ch. 6 Residential Development Standards (Sec. 6.02.040)",
      "source_url": "https://library.municode.com/tx/georgetown/codes/unified_development_code",
      "sort_order": 1,
      "id": "28806f39272770f09a2a2290a9d1478633cc1764d7bb170f56573e76a5cbb2fb",
      "frame_index": 1708,
      "category": "residential",
      "pack_version": 3
    },
    {
      "municipality_slug": "georgetown-tx",
      "district_code": "TF",
      "topic": "height",
      "body_md": "Table in UDC Sec. 6.02.060 sets TF maximum building height at 35 ft maximum. Height exceptions and measurement rules are in Section 6.04.030. Confirm overlay status (the Downtown, Old Town, and Gateway overlays can modify height) and any approved development agreement before relying on this answer.",
      "citation": "UDC Ch. 6 Residential Development Standards (Sec. 6.02.060)",
      "source_url": "https://library.municode.com/tx/georgetown/codes/unified_development_code",
      "sort_order": 1,
      "id": "6162ad03ddb085af87419d84f2bb96ced6a0190044afe07de50b384416d895f9",
      "frame_index": 1719,
      "category": "residential",
      "pack_version": 3
    },
    {
      "municipality_slug": "georgetown-tx",
      "district_code": "TH",
      "topic": "lot_coverage",
      "body_md": "TH does not use a fixed lot coverage percentage in UDC Table 6.02.070; impervious cover is instead governed citywide by UDC Section 11.02 (Impervious Coverage). Accessory structure coverage of the rear yard is separately capped at 30 percent (up to 50 percent for a detached two-car garage not exceeding 600 sq ft) under Section 6.05.010.E. Confirm the current Section 11.02 impervious cover limits and any watershed overlay with the Planning Department before relying on this answer.",
      "citation": "UDC Ch. 6 Residential Development Standards (Sec. 6.02.070)",
      "source_url": "https://library.municode.com/tx/georgetown/codes/unified_development_code",
      "sort_order": 1,
      "id": "636ad53a1082e1a840637b66c2e2defd3a96b988f7bfbc1965379a31dfe9be34",
      "frame_index": 1725,
      "category": "residential",
      "pack_version": 3
    },
    {
      "municipality_slug": "goodyear-az",
      "district_code": "AU",
      "topic": "permitted_uses",
      "body_md": "One single-family detached home is a principal permitted use, along with agricultural uses for non-commercial gain (Table 3-2-2). In AU, animal keeping is limited to a maximum of 3 large animals and 5 small animals per acre of lot area, or a combination, kept for non-commercial gain only (Sec. 3-2-4-C). The full use table is in Sec. 3-2-2.",
      "citation": "Table 3-2-2",
      "source_url": "https://goodyear.municipal.codes/ZoningOrds/3-2-2",
      "sort_order": 1,
      "id": "faf24758f9df278d3b0bca5c40350bc95724050390099fcd6a1a834a3e308646",
      "frame_index": 1743,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "goodyear-az",
      "district_code": "C-1",
      "topic": "permitted_uses",
      "body_md": "Limited retailing on small parcels serving nearby residential neighborhoods, often used as a transition buffer between arterial streets and residential districts (Sec. 3-3-2). Area, setback, and height requirements conform to the Commercial Districts Standards in Sec. 3-3-7.",
      "citation": "Sec. 3-3-2",
      "source_url": "https://goodyear.municipal.codes/ZoningOrds/3-3-2",
      "sort_order": 1,
      "id": "097b96ffcf765525393c1629206055c41143069275c3cfd39015a488bb653abb",
      "frame_index": 1751,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "goodyear-az",
      "district_code": "MF-12",
      "topic": "permitted_uses",
      "body_md": "Multi-family residential use capped at **12 dwelling units per acre**. All uses in the multi-family districts are subject to Site Plan review (Sec. 3-2-5).",
      "citation": "Table 3-2-5",
      "source_url": "https://goodyear.municipal.codes/ZoningOrds/3-2-5",
      "sort_order": 1,
      "id": "4e80f1300e2bd2e0e0a8b22c10209bac8d0d019c52820711fd2ed848f0a29691",
      "frame_index": 1775,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "goodyear-az",
      "district_code": "R2",
      "topic": "setbacks",
      "body_md": "Front: **20 feet**, front-facing garage 20 feet. Side: **5 feet**, total both sides **15 feet**. Street side: **20 feet**. Rear: **20 feet**.",
      "citation": "Table 3-2-3-A",
      "source_url": "https://goodyear.municipal.codes/ZoningOrds/3-2-3",
      "sort_order": 1,
      "id": "d678622e55bb428304370d7f7485c2b70d7f87a9cc8b02f05e27509c27c6389b",
      "frame_index": 1829,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "goodyear-az",
      "district_code": "R2",
      "topic": "height",
      "body_md": "Maximum height **30 feet** for the principal building.",
      "citation": "Table 3-2-3-A",
      "source_url": "https://goodyear.municipal.codes/ZoningOrds/3-2-3",
      "sort_order": 1,
      "id": "8a9073aa95b6e6fcf90ab22e4ae2a24fd7da278baa712e3fce6c1a1c3a4fa54e",
      "frame_index": 1830,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "hendersonville-tn",
      "district_code": "ER",
      "topic": "setbacks",
      "body_md": "Base yards in ER: front **40 feet**, side-street **35 feet**, side **20 feet**, rear **35 feet**. Table notes can modify townhome, multifamily, alley, Corps of Engineers, and lakefront conditions.",
      "citation": "Chapter 6.3, Table 4",
      "source_url": "https://www.hvilletn.org/DocumentCenter/View/439/2025-Zoning-Ordinance-2025-19-PDF",
      "sort_order": 1,
      "id": "05e4a531d7254d566b048458f0513f513da3281d091d004c4b3f2cc30e299dd5",
      "frame_index": 1843,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "hendersonville-tn",
      "district_code": "MXC",
      "topic": "lot_coverage",
      "body_md": "Table 10 sets no maximum lot coverage for MXC; it sets a minimum pervious area of **25 percent** and a maximum floor-area ratio of **1.00**. The approved development plan can impose greater standards.",
      "citation": "Chapter 8.7.3, Table 10",
      "source_url": "https://www.hvilletn.org/DocumentCenter/View/439/2025-Zoning-Ordinance-2025-19-PDF",
      "sort_order": 1,
      "id": "04d6c0a62074f782d4b8c5096ab78e8c3771c6184c73af146b2862c1a00527c7",
      "frame_index": 1870,
      "category": "mixed",
      "pack_version": 2
    },
    {
      "municipality_slug": "hendersonville-tn",
      "district_code": "NC",
      "topic": "permitted_uses",
      "body_md": "NC supports neighborhood-scale commercial uses serving nearby residential areas; check Table 5 for whether each retail, service, restaurant, or civic use is permitted, conditional, or subject to use-specific standards. Confirm conditional-use, use-specific, parking, and site-plan standards for the exact activity.",
      "citation": "Chapters 7.1 and 7.2, Table 5",
      "source_url": "https://www.hvilletn.org/DocumentCenter/View/439/2025-Zoning-Ordinance-2025-19-PDF",
      "sort_order": 1,
      "id": "e4a9a91d0100872dba28788f205b4bf20f2454cebc20b55a547bf684e3731f5f",
      "frame_index": 1877,
      "category": "commercial",
      "pack_version": 2
    },
    {
      "municipality_slug": "holly-springs-nc",
      "district_code": "CB",
      "topic": "setbacks",
      "body_md": "Front (minimum): **30 feet**; front maximum: n/a (not applicable). Side-corner (minimum): **30 feet**. All other setbacks (side and rear): **5 feet**. Setback to adjacent RR/SR/NR districts: **50 feet** minimum. Thoroughfare setback **25 feet** (100 feet on NC 540/US 1, 50 feet on NC 55).",
      "citation": "Table 2.2.2-A (Sec. 2.2.2)",
      "source_url": "https://www.hollyspringsnc.gov/DocumentCenter/View/37679/Section-2-Districts",
      "sort_order": 1,
      "id": "dfadad1d82f8141ff28b80a339420aacdf958aea416698d7d2ea823db85d983f",
      "frame_index": 1928,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "holly-springs-nc",
      "district_code": "DMX",
      "topic": "permitted_uses",
      "body_md": "DMX is the traditional downtown core: apartment dwellings are permitted with additional standards (PS); retail, dining, hotels, and most office/personal service uses are permitted by right (P). Attached dwellings (duplex, triplex, quadruplex, townhome) require a Conditional Zoning District (CD) in DMX. Detached dwellings are prohibited (--) in DMX. Verified cell by cell against a rendered image of Table 3.2-A (PDF p.3). The full use table is in Table 3.2-A.",
      "citation": "Table 3.2-A",
      "source_url": "https://www.hollyspringsnc.gov/DocumentCenter/View/37680/Section-3-Use-Provisions",
      "sort_order": 1,
      "id": "6d26e320ceb69178924d764fd70aba48423fd5f1c6d10b417ec2bd868ef196c2",
      "frame_index": 1933,
      "category": "mixed",
      "pack_version": 1
    },
    {
      "municipality_slug": "holly-springs-nc",
      "district_code": "HI",
      "topic": "height",
      "body_md": "Maximum building height for HI is established with the Conditional Zoning District (CD) that creates the district; there is no default citywide maximum in Table 2.2.3-A (Note N9).",
      "citation": "Table 2.2.3-A (Sec. 2.2.3); Note N9",
      "source_url": "https://www.hollyspringsnc.gov/DocumentCenter/View/37679/Section-2-Districts",
      "sort_order": 1,
      "id": "a3c926596f6e602c3de21357356303a2f9387fda14eaee5f5c57d6de1e1f22e5",
      "frame_index": 1941,
      "category": "industrial",
      "pack_version": 1
    },
    {
      "municipality_slug": "holly-springs-nc",
      "district_code": "NMX",
      "topic": "lot_size",
      "body_md": "Minimum lot frontage **50 feet**. Minimum lot frontage for a driveway serving a detached/attached dwelling permitted by right: **60 feet**. No minimum development area is set below 5 acres of site size (Note N1). Maximum gross main floor area per building: **16,000 sq ft** single-use site, **24,000 sq ft** integrated center (**125,000 sq ft** with a Conditional Zoning District).",
      "citation": "Table 2.2.2-A (Sec. 2.2.2)",
      "source_url": "https://www.hollyspringsnc.gov/DocumentCenter/View/37679/Section-2-Districts",
      "sort_order": 1,
      "id": "3c8d9c7af20da296f5026349f7c867dafeb92dd2315837fc9fc7c3ce9c7d113f",
      "frame_index": 1966,
      "category": "mixed",
      "pack_version": 1
    },
    {
      "municipality_slug": "holly-springs-nc",
      "district_code": "SR",
      "topic": "height",
      "body_md": "Maximum principal building height **35 feet** (**50 feet** with a Conditional Zoning District). Maximum accessory building/structure height **25 feet**, and an accessory building may not exceed the height of the primary building on the lot (Note N14).",
      "citation": "Table 2.2.1-A (Sec. 2.2.1)",
      "source_url": "https://www.hollyspringsnc.gov/DocumentCenter/View/37679/Section-2-Districts",
      "sort_order": 1,
      "id": "1e222802f21bbf23e5f823d1291e10675f204db6289f8d99b1665e1b50da31e3",
      "frame_index": 1992,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "huntersville-nc",
      "district_code": "NR",
      "topic": "permitted_uses",
      "body_md": "Uses permitted by right: bed and breakfast inns; boarding or rooming houses for up to four roomers; congregate housing (in the civic building type); family care homes; multi-family homes; single family homes. Uses permitted with conditions include cemeteries (9.7), religious institutions (9.8), commercial use in a mixed-use building on an arterial or a local/larger-capacity street intersection, commercial use in a detached house building type within a quarter mile of a Town Center district fronting a major or minor thoroughfare (9.51), essential services 1 and 2 (9.14), government buildings up to 5,000 sq. ft., neighborhood and outdoor recreation (9.21), parks (9.29), retirement communities (9.50), schools (9.35), transit-oriented parking lots as a principal use (9.49), transit shelters (9.39), and multi-family homes under the one-building-one-lot buffer standard (9.64). The intensity a use may be built to is regulated by its assigned building type under Article 4, not a single per-district number.",
      "citation": "Art. 3.2.4(a), as amended by TA22-16 (adopted March 20, 2023)",
      "source_url": "https://s3-us-west-2.amazonaws.com/municipalcodeonline.com-new/huntersville/zoning/pdf/Ord_TA22-16.pdf",
      "sort_order": 1,
      "id": "836956de7f75c82d9d1b8ef7792f29b7227da76c3d9ef0888b48dd76aee0bfb1",
      "frame_index": 2010,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "hutto-tx",
      "district_code": "*",
      "topic": "fences",
      "body_md": "Residential front yard fences are limited to 3.5 ft. (42 in.) with at least 50 percent transparency along at least half the height; residential side and rear fences may reach 6 ft. (72 in.) (UDC 10.408.4). Electrically charged, barbed wire, and razor wire fences are prohibited except for livestock, public safety institutions, and construction sites (UDC 10.408.3.2.3). Makeshift materials such as plywood and corrugated sheet metal are prohibited, columns may exceed the fence by up to 6 in., and fences must be maintained upright and in good repair (UDC 10.408.3). Taller fence types exist for courts, industrial perimeters, and construction sites; check the 10.408.4 table for your situation.",
      "citation": "UDC 10.408",
      "source_url": "https://www.huttotx.gov/DocumentCenter/View/3779/UDC-Updated-through-March-2024",
      "sort_order": 1,
      "id": "0d69123b14ccaa0701dd1510740d9f374f64c473035e5dd5010400630248d47b",
      "frame_index": 2032,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "hutto-tx",
      "district_code": "G",
      "topic": "permitted_uses",
      "body_md": "G is an overlay over the Hutto Gateway area designated by Ordinance 07-006-00. Development must incorporate the stated design principles through PUD zoning or voluntary FBC compliance, and adult oriented uses, travel plazas, truck stops, junkyards, and vehicle major repair facilities are expressly prohibited (UDC 10.303.16.5). Sites under ten acres and several other cases are exempt (UDC 10.303.16.3). Confirm overlay applicability with Development Services.",
      "citation": "UDC 10.303.16",
      "source_url": "https://www.huttotx.gov/DocumentCenter/View/3779/UDC-Updated-through-March-2024",
      "sort_order": 1,
      "id": "9e4f216127707ae294658ece316be462d9cd92797a9834cd118eb9745a242f59",
      "frame_index": 2050,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "hutto-tx",
      "district_code": "LI",
      "topic": "setbacks",
      "body_md": "LI shares the LI/I column in the dimensional charts: minimum lot area 87,120 sq. ft. (2 acres) with 200 ft. width (UDC 10.403.3); 25 ft. front yard; side and rear yards of 0 ft. for common walls or 10 ft. and 25 ft. respectively, but next to residential the setback rises to 2 ft. for every 1 ft. of building height or 50 ft., whichever is greater (UDC 10.403.4.2). Verify the chart cell and bufferyard standards before design decisions.",
      "citation": "UDC 10.403.3; 10.403.4.2",
      "source_url": "https://www.huttotx.gov/DocumentCenter/View/3779/UDC-Updated-through-March-2024",
      "sort_order": 1,
      "id": "d8bd10eb86adbf143a8ada75168589cb56341bce1155d1c99d58c16edded24f4",
      "frame_index": 2057,
      "category": "industrial",
      "pack_version": 1
    },
    {
      "municipality_slug": "hutto-tx",
      "district_code": "MF",
      "topic": "permitted_uses",
      "body_md": "MF permits multiple household dwellings, single household attached dwellings (townhouses), and independent living facilities by right, per the UDC 10.304.5 table. Assisted living facilities, live-work dwellings, and nursing homes require a specific use permit. Group homes are permitted subject to conditions. Multiple household design standards are in UDC 10.406.4. Read the exact use table row and confirm overlays before acting.",
      "citation": "UDC 10.303.5; 10.304.5",
      "source_url": "https://www.huttotx.gov/DocumentCenter/View/3779/UDC-Updated-through-March-2024",
      "sort_order": 1,
      "id": "b76bf13b7318ffb35c99423a7bae51bd63abec381fbf1408b332225c144b5e10",
      "frame_index": 2060,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "hutto-tx",
      "district_code": "MH",
      "topic": "setbacks",
      "body_md": "The UDC 10.403.4.2 chart lists MH site minimums of 25 ft. front, 25 ft. side, and 25 ft. rear yards for the manufactured home site. Setbacks for individual home spaces inside a park come from the park standards in UDC 10.306.17. Verify both the district chart cell and the park standards before design decisions.",
      "citation": "UDC 10.403.4.2; 10.306.17",
      "source_url": "https://www.huttotx.gov/DocumentCenter/View/3779/UDC-Updated-through-March-2024",
      "sort_order": 1,
      "id": "325a400cd882c7305d0c9fc992c6ead171d0ada5be68de8104c1dd1029451003",
      "frame_index": 2066,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "hutto-tx",
      "district_code": "SF-R",
      "topic": "setbacks",
      "body_md": "The UDC 10.403.4.2 bulk chart lists SF-R minimums of 50 ft. front yard, 20 ft. side yard, and 50 ft. rear yard, with 20 ft. spacing between buildings. Riparian setbacks under UDC 10.403.4.3 and bufferyard standards under UDC 10.403.6 can add to these. Verify the chart cell and any overlay or plat conditions before design decisions.",
      "citation": "UDC 10.403.4.2",
      "source_url": "https://www.huttotx.gov/DocumentCenter/View/3779/UDC-Updated-through-March-2024",
      "sort_order": 1,
      "id": "d8113269f8f0e72ab649f877876e0215fb1b19f365ddbc0e7ace14f14d1e7bec",
      "frame_index": 2090,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "indian-trail-nc",
      "district_code": "*",
      "topic": "accessory_structures",
      "body_md": "Accessory uses and structures are governed by Chapter 710 and, in residential districts, Sec. 520.080. Residential accessory structure setbacks in Table 500-1 are generally 5 feet from side and rear property lines and 10 feet on a corner lot street side. Confirm the specific accessory use standard in Chapter 710.",
      "citation": "UDO Ch. 710; Sec. 520.080",
      "source_url": "https://indiantrail.municipalcodeonline.com/book/print?type=development",
      "sort_order": 1,
      "id": "1291e78e7159743bffc165348377979e1b651be9ea8844176d0a76866d33cb83",
      "frame_index": 2097,
      "category": "special",
      "pack_version": 2
    },
    {
      "municipality_slug": "indian-trail-nc",
      "district_code": "*",
      "topic": "home_occupation",
      "body_md": "Home occupations are governed by Chapter 780. Specific performance standards and limits are in Chapter 780 of the UDO text and are review gated to that chapter.",
      "citation": "UDO Ch. 780",
      "source_url": "https://indiantrail.municipalcodeonline.com/book/print?type=development",
      "sort_order": 1,
      "id": "d95e5e99374e7fe653a0f53cb5d845847fe0b35f8e1da1e0ff570c02d123d946",
      "frame_index": 2100,
      "category": "special",
      "pack_version": 2
    },
    {
      "municipality_slug": "indian-trail-nc",
      "district_code": "SF-1",
      "topic": "permitted_uses",
      "body_md": "Permitted uses in SF-1 are controlled by the Table of Permitted Uses (Table 500-5), snapshots use-table-01.png through use-table-06.png. Codes: P permitted by right, C conditional zoning, \"--\" prohibited. This pack does not guess individual use cells from the multi-column table; treat each use as review gated until the specific row and the SF-1 column are checked in the snapshots.",
      "citation": "UDO Table 500-5 (Table of Permitted Uses), Ch. 570",
      "source_url": "https://s3-us-west-2.amazonaws.com/municipalcodeonline.com-new/indiantrail/ADC/files/ordinance/1769531414_Table%20of%20Permitted%20Uses%20-%2001-13-2026.pdf",
      "sort_order": 1,
      "id": "13356ce3485b20fb76af507269de47c4c9396c231c0ab22bd2f9fee8d36bbc92",
      "frame_index": 2153,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "kyle-tx",
      "district_code": "B",
      "topic": "height",
      "body_md": "Chart 1 defers District B height to chapter 29 (Sign Standards and Permits). Check the current sign ordinance for structure height and spacing limits. Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.",
      "citation": "Sec. 53-33(k) chart 1 note 11; Chapter 29",
      "source_url": "https://ecode360.com/45536778#45536778",
      "sort_order": 1,
      "id": "3218c4ddc91309e98f8e616779c8ccc62fc3decd4765c74a7ce444fa4eb77fc1",
      "frame_index": 2191,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "kyle-tx",
      "district_code": "CBD-2",
      "topic": "permitted_uses",
      "body_md": "Sec. 53-443 allows a mix of office, restricted commercial, restricted multifamily, and residential uses per the Sec. 53-1230 table. Each multifamily dwelling unit needs at least 500 square feet of living area, and one multifamily unit is allowed on the ground floor at the rear of the building. Enclosed-building limits with delivery, outdoor dining, and display exceptions apply; outdoor live music is limited to acoustic performances without electronic amplification unless a conditional use permit is approved (Sec. 53-444). Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.",
      "citation": "Sec. 53-443; Sec. 53-1230",
      "source_url": "https://ecode360.com/45581075#45581075",
      "sort_order": 1,
      "id": "f1bc312327bbb4dbe008bd47ec35d6637f26857b0cfb665c15a994817c48e32a",
      "frame_index": 2198,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "kyle-tx",
      "district_code": "E",
      "topic": "setbacks",
      "body_md": "Chart 1: front 25 feet, side 25 feet, corner lot side street 15 feet, rear 15 feet, on a minimum 6,000 square foot lot with 50 feet of width. Street-facing walls must be 100 percent masonry or wood siding (Sec. 53-587) and residential-abutting development needs solid screening (Sec. 53-588). Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.",
      "citation": "Sec. 53-33(k) chart 1",
      "source_url": "https://ecode360.com/45580716#45580716",
      "sort_order": 1,
      "id": "dddbaaf9315d9d23dd7615ed850f006ae74455893dc489da3830d0ce6d4c942c",
      "frame_index": 2216,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "kyle-tx",
      "district_code": "M-3",
      "topic": "permitted_uses",
      "body_md": "Sec. 53-382 permits manufactured home parks with lots under common ownership rented or leased to tenants, homes having at least 1,000 square feet of living area. Sec. 53-383 adds one home per approved space, park accessory and recreational facilities, and one single-family dwelling on a lot of 8,190 square feet or more for the owner or manager. A rental park is permitted only in M-3 (Sec. 53-385), garages, carports, and living area additions are not permitted (Sec. 53-386), and conversion to a subdivision requires rezoning to M-2 (Sec. 53-384(4)). Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.",
      "citation": "Secs. 53-382 to 53-387",
      "source_url": "https://ecode360.com/45581024#45581024",
      "sort_order": 1,
      "id": "4bc05d7472cd0b4236c69518dd1e90943e36a6ff3dee2ee27b73d423d2b202e5",
      "frame_index": 2237,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "kyle-tx",
      "district_code": "R-1-A",
      "topic": "permitted_uses",
      "body_md": "Sec. 53-111 permits attached single-family structures (garden homes, paired homes, patio homes, zero lot line homes) with a minimum 1,000 square feet of living area per unit, capped at 6.8 houses per buildable acre. Single-family detached structures are allowed only as a conditional use after public hearing. Sec. 53-113 requires a 480 square foot garage and 100 percent masonry on all four sides. Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.",
      "citation": "Secs. 53-111 to 53-113",
      "source_url": "https://ecode360.com/45580845#45580845",
      "sort_order": 1,
      "id": "ee3075d528a748b4cd6cbea044a6cc04d5292cd78142c387a1799b6eb528aefb",
      "frame_index": 2280,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "kyle-tx",
      "district_code": "R-2",
      "topic": "setbacks",
      "body_md": "Chart 1: front 25 feet, side 7 feet, corner lot side street 10 feet, rear 25 feet. Note 9 front setback reductions can apply, never below 16 feet. Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.",
      "citation": "Sec. 53-33(k) chart 1 and note 9",
      "source_url": "https://ecode360.com/45580716#45580716",
      "sort_order": 1,
      "id": "abddf1f2bc1065ad1b1d7345b4063a0a385832e1e339f9dd4668d26a9ca9acc5",
      "frame_index": 2296,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "kyle-tx",
      "district_code": "R-3-2",
      "topic": "height",
      "body_md": "Chart 1 height limit is 45 feet and note 7 caps buildings at three stories. Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.",
      "citation": "Sec. 53-33(k) chart 1 and note 7",
      "source_url": "https://ecode360.com/45580716#45580716",
      "sort_order": 1,
      "id": "67d3d944c3e16b4ba57d4dbf3dd7d7b9e27e0d9a7cfca684597164a2bee43fbd",
      "frame_index": 2307,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "kyle-tx",
      "district_code": "TU",
      "topic": "parking",
      "body_md": "Chart 4 has no TU-specific ratio; off-street parking for uses not listed is determined by the planning department to meet anticipated needs (Sec. 53-33(n)(7)). Confirm the current text and any overlay, PUD condition, or plat note with the Kyle Planning Department before relying on this cell.",
      "citation": "Sec. 53-33(n) chart 4",
      "source_url": "https://ecode360.com/45580716#45580716",
      "sort_order": 1,
      "id": "ba02c21c27e97e82c11caa1d813c6572e1dfae43be304df7df88bc48566bd1ed",
      "frame_index": 2327,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "leander-tx",
      "district_code": "*",
      "topic": "accessory_structures",
      "body_md": "Art. IV, sec. 5 sets citywide accessory building/structure standards. In residential districts an accessory building/structure is incidental to and not used commercially or rented; an enclosed garage counts as part of the primary structure even if detached, and (in residential districts) so does a covered patio or porch. Enclosed accessory buildings are barred in front of or to the side of the main building; otherwise they share the primary building's setbacks, except the rear setback for an accessory building/structure in a single-family or two-family district may drop to 5 ft (with exceptions), and any accessory structure must sit at least 3 ft from another structure on the property. No accessory building/structure may exceed one story or 15 ft in height, except in an SFR or nonresidential district where the cap rises to 28 ft (SFR barns/stables are separately capped at 28 ft to the roof peak, set back at least 25 ft from a property line and 100 ft from an existing residence on adjacent property). Accessory buildings/structures cannot exist without a main building or primary use already in place. Confirm the district, site component, and current art. IV, sec. 5 text with the Leander Planning Department before acting.",
      "citation": "Leander Code of Ordinances ch. 14, exh. A (Composite Zoning Ordinance), art. IV, sec. 5 (accessory building/structure/use)",
      "source_url": "https://library.municode.com/tx/leander/codes/code_of_ordinances?nodeId=CH14ZO",
      "sort_order": 1,
      "id": "37995d6652e3164b3cd10474c44a965a1cff12d2c02083710e0c18cf894dec06",
      "frame_index": 2341,
      "category": "special",
      "pack_version": 4
    },
    {
      "municipality_slug": "leander-tx",
      "district_code": "TF",
      "topic": "permitted_uses",
      "body_md": "TF permitted use standards are review gated pending human verification. A parcel's full zoning in Leander is a composite designation that pairs a use component with a site component (Type 1 through 5, art. V) and an architectural component (Type A through D, art. VII), for example SFU-2-B. The controlling text is Leander Code of Ordinances ch. 14, exh. A (Composite Zoning Ordinance), art. III, sec. 9 (TF use component) and art. III, sec. 20 (use matrix). This cell is review gated and should be checked against the live cited source before import or publish. Confirm the parcel's full composite designation, overlays, ordinance conditions, and any PUD or development agreement with the Leander Planning Department before acting.",
      "citation": "Leander Code of Ordinances ch. 14, exh. A (Composite Zoning Ordinance), art. III, sec. 9 (TF use component) and art. III, sec. 20 (use matrix)",
      "source_url": "https://library.municode.com/tx/leander/codes/code_of_ordinances?nodeId=CH14ZO",
      "sort_order": 1,
      "id": "d8d3bc9aa35b0c218a3dbc596a426f0f7b15950b0712f4fd937123133d04d7dc",
      "frame_index": 2428,
      "category": "residential",
      "pack_version": 4
    },
    {
      "municipality_slug": "lebanon-tn",
      "district_code": "*",
      "topic": "special_land_uses",
      "body_md": "Each district lists conditional uses that need review, findings, and conditions before approval, and every district prohibits any use not specifically allowed. Check the district use table and Chapter 2 use classifications, then confirm process with Planning staff.",
      "citation": "Title 14, Chapter 2 (use classification) and district use tables",
      "source_url": "https://www.lebanontn.org/816/Chapter-2-Use-Classification",
      "sort_order": 1,
      "id": "af332d375f6226acc62d6c1322bec60d93b9825a4ec7e1a538d16ead063231a6",
      "frame_index": 2443,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "lebanon-tn",
      "district_code": "*",
      "topic": "accessory_structures",
      "body_md": "Accessory building standards are set district by district in the Chapter 3 lot development tables: most residential districts cap an accessory dwelling unit at **700 sf** (maximum one ADU per parcel) and set separate accessory setbacks; caps for other accessory buildings vary by district (for example 1,000 sf in RS12, 2,000 sf in CI). Check your district table and confirm with Planning staff.",
      "citation": "Title 14, Chapter 3 district tables (accessory building standards)",
      "source_url": "https://www.lebanontn.org/817/Chapter-3-Zoning-Districts",
      "sort_order": 1,
      "id": "ea2a793dcc354ea655783cceec93f69240190c7fcf5fe6c3572e57e1104ab234",
      "frame_index": 2446,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "lebanon-tn",
      "district_code": "CI",
      "topic": "permitted_uses",
      "body_md": "Permitted uses include retail, food and beverage (including drive-thru), offices, hotel and motel, entertainment, construction sales and services, and animal care. Automotive repair and cleaning, automotive servicing, building materials and farm equipment, check cashing, and vehicle sales are conditional. Car washes and smoke and vape shops are prohibited. Single-family residential is permitted only as an accessory use or on a lot of record existing on June 6, 2023. Verified against the city-hosted Title 14 district PDF on 2026-07-03.",
      "citation": "Title 14, Sec. 14.305 (CI district regulations)",
      "source_url": "https://www.lebanontn.org/DocumentCenter/View/6399",
      "sort_order": 1,
      "id": "7c5c35ef636329471bd7808ecb912221ea22e2e215e8f57bf39e59f86fd3a8c8",
      "frame_index": 2454,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "lebanon-tn",
      "district_code": "CI",
      "topic": "lot_coverage",
      "body_md": "The CI lot development table in Sec. 14.305 sets no maximum lot coverage or impervious surface percentage; bulk is controlled through setbacks, height, landscaping, and stormwater review instead. Verified against the city-hosted Title 14 district PDF on 2026-07-03.",
      "citation": "Title 14, Sec. 14.305 (CI district regulations)",
      "source_url": "https://www.lebanontn.org/DocumentCenter/View/6399",
      "sort_order": 1,
      "id": "ad293856f06997ed6d2e69c27ad745df165bb115275198611beebda89d2d2d3d",
      "frame_index": 2457,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "lebanon-tn",
      "district_code": "RM6",
      "topic": "lot_coverage",
      "body_md": "The RM6 lot development table in Sec. 14.303 sets no maximum lot coverage or impervious surface percentage; bulk is controlled through setbacks, height, landscaping, and stormwater review instead. Verified against the city-hosted Title 14 district PDF on 2026-07-03.",
      "citation": "Title 14, Sec. 14.303 (RM6 district regulations)",
      "source_url": "https://www.lebanontn.org/DocumentCenter/View/6418",
      "sort_order": 1,
      "id": "00030b651aabb23dac4207807bc674e2dec64663f3a1193b5499d74891a05514",
      "frame_index": 2504,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "lebanon-tn",
      "district_code": "RMH",
      "topic": "lot_coverage",
      "body_md": "The RMH lot development table in Sec. 14.303 sets no maximum lot coverage or impervious surface percentage; bulk is controlled through setbacks, height, landscaping, and stormwater review instead. Verified against the city-hosted Title 14 district PDF on 2026-07-03.",
      "citation": "Title 14, Sec. 14.303 (RMH district regulations)",
      "source_url": "https://www.lebanontn.org/DocumentCenter/View/6419",
      "sort_order": 1,
      "id": "174aa12f613e108953a4d73669774748688949a24ae044ad235460dd5cd98482",
      "frame_index": 2509,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "lebanon-tn",
      "district_code": "RMH",
      "topic": "lot_size",
      "body_md": "Minimum lot size is **6,000 sf** for the first dwelling plus **1,500 sf** per additional dwelling. Minimum lot width is **50 feet** (**18 feet** for townhome lots) and minimum lot depth is **100 feet** (**75 feet** for townhomes). Verified against the city-hosted Title 14 district PDF on 2026-07-03.",
      "citation": "Title 14, Sec. 14.303 (RMH district regulations)",
      "source_url": "https://www.lebanontn.org/DocumentCenter/View/6419",
      "sort_order": 1,
      "id": "ae5b71a762071fc1ff4ad13acefeda36c514b244fab4eca1a408f88a4268b751",
      "frame_index": 2510,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "lebanon-tn",
      "district_code": "RPI",
      "topic": "permitted_uses",
      "body_md": "A broad mix is permitted: most dwelling types (multifamily capped at **4 units** per building, one multifamily building per parcel), apartment hotel, hotel and motel, offices, medical services, food and beverage service, convenience commercial, community and cultural uses, and public services. Bed and breakfast homestay/Airbnb is conditional. Residential parcels cannot exceed **85 percent** of the area of each RPI polygon. Any use not specifically allowed is prohibited. Verified against the city-hosted Title 14 district PDF on 2026-07-03.",
      "citation": "Title 14, Sec. 14.304 (RPI district regulations)",
      "source_url": "https://www.lebanontn.org/DocumentCenter/View/6391",
      "sort_order": 1,
      "id": "afb0f4420c6e54623988ae62c00fd429d2beaf29cb0991b995a479c66f830851",
      "frame_index": 2511,
      "category": "mixed",
      "pack_version": 1
    },
    {
      "municipality_slug": "lebanon-tn",
      "district_code": "RS12",
      "topic": "lot_coverage",
      "body_md": "The RS12 lot development table in Sec. 14.303 sets no maximum lot coverage or impervious surface percentage; bulk is controlled through setbacks, height, landscaping, and stormwater review instead. Verified against the city-hosted Title 14 district PDF on 2026-07-03.",
      "citation": "Title 14, Sec. 14.303 (RS12 district regulations)",
      "source_url": "https://www.lebanontn.org/DocumentCenter/View/6413",
      "sort_order": 1,
      "id": "5931db5452f86bf9c4ac2b4f0217006fdd0d8decb2f7d406e649dc8bd5549351",
      "frame_index": 2524,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "lebanon-tn",
      "district_code": "RXH",
      "topic": "height",
      "body_md": "Maximum primary building height is **3 stories** and **45 feet**; accessory buildings max **2 stories**. Verified against the city-hosted Title 14 district PDF on 2026-07-03.",
      "citation": "Title 14, Sec. 14.303 (RXH district regulations)",
      "source_url": "https://www.lebanontn.org/DocumentCenter/View/6417",
      "sort_order": 1,
      "id": "bc2e5fe30ba8d160c2a3c9a836a8d80fec37a7f81b493c3f87ff877a9fe60eea",
      "frame_index": 2543,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "little-elm-tx",
      "district_code": "HI",
      "topic": "setbacks",
      "body_md": "Minimum front yard **20 feet**, maximum front yard **100 feet**. No minimum side yard, except **20 feet minimum adjacent to residential**. No minimum rear yard, except **40 feet minimum adjacent to residential** (Article III, Table X).",
      "citation": "Article III, Table X",
      "source_url": "https://library.municode.com/tx/little_elm/codes/code_of_ordinances?nodeId=PTIICOOR_CH106ZO_ARTIIIZODI_S106.03.03ZODINOCOIN",
      "sort_order": 1,
      "id": "a3cd4b3fd42d562e45e353e549a2e7142695d841953228d6f0efc0e034af4c55",
      "frame_index": 2596,
      "category": "industrial",
      "pack_version": 1
    },
    {
      "municipality_slug": "little-elm-tx",
      "district_code": "LI",
      "topic": "setbacks",
      "body_md": "Minimum front yard **20 feet**, maximum front yard **100 feet**. No minimum side yard, except **20 feet minimum adjacent to residential**. No minimum rear yard, except **40 feet minimum adjacent to residential** (Article III, Table W).",
      "citation": "Article III, Table W",
      "source_url": "https://library.municode.com/tx/little_elm/codes/code_of_ordinances?nodeId=PTIICOOR_CH106ZO_ARTIIIZODI_S106.03.03ZODINOCOIN",
      "sort_order": 1,
      "id": "b9801645260b27d255a523cc7e8774f12b157eb56fe8570e45a677c14c929d82",
      "frame_index": 2608,
      "category": "industrial",
      "pack_version": 1
    },
    {
      "municipality_slug": "little-elm-tx",
      "district_code": "NS",
      "topic": "lot_size",
      "body_md": "Minimum lot width **50 feet**. Minimum lot area **1 acre**, unless otherwise approved through the site plan process (Article III, Table S, Note 3).",
      "citation": "Article III, Table S",
      "source_url": "https://library.municode.com/tx/little_elm/codes/code_of_ordinances?nodeId=PTIICOOR_CH106ZO_ARTIIIZODI_S106.03.03ZODINOCOIN",
      "sort_order": 1,
      "id": "5828f23aba19c01a124fc610a0cbd3f048a7e1d38ec0645f2452f85e5e6b7647",
      "frame_index": 2624,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "little-elm-tx",
      "district_code": "O",
      "topic": "permitted_uses",
      "body_md": "Office uses (Sec. 106.03.03(b)(1)). The full nonresidential use table is in Sec. 106.05.01(b), Article V Table B.",
      "citation": "Sec. 106.03.03(b); Sec. 106.05.01(b)",
      "source_url": "https://library.municode.com/tx/little_elm/codes/code_of_ordinances?nodeId=PTIICOOR_CH106ZO_ARTIIIZODI_S106.03.03ZODINOCOIN",
      "sort_order": 1,
      "id": "d8681d7477c1e901208e9464046dc7f5e213ec25a14d2def356ac866d68df3b4",
      "frame_index": 2625,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "little-elm-tx",
      "district_code": "PD",
      "topic": "height",
      "body_md": "Height and area standards generally follow the base zoning district's regulations, but town council establishes specific standards as needed to implement the planned development (Sec. 106.04.03(d)). Confirm the specific adopting PD ordinance for the property before acting.",
      "citation": "Sec. 106.04.03(d)",
      "source_url": "https://library.municode.com/tx/little_elm/codes/code_of_ordinances?nodeId=PTIICOOR_CH106ZO_ARTIVSPDI_S106.04.03PLDEDI",
      "sort_order": 1,
      "id": "14459f095bcf0b16dffe1240cd02db39d77ccbd8832f97283999b45d9100b0df",
      "frame_index": 2630,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "little-elm-tx",
      "district_code": "SF-1",
      "topic": "height",
      "body_md": "Maximum height **35 feet** (Article III, Table G).",
      "citation": "Article III, Table G",
      "source_url": "https://library.municode.com/tx/little_elm/codes/code_of_ordinances?nodeId=PTIICOOR_CH106ZO_ARTIIIZODI_S106.03.02ZODIRE",
      "sort_order": 1,
      "id": "f58a2e70e8d6f6df4b3ef073fb16aaa5746bc9e0ba79f85b98795c2f199b4844",
      "frame_index": 2638,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "macomb-township",
      "district_code": "M-2",
      "topic": "permitted_uses",
      "body_md": "Principal permitted uses in M-2, subject to Planning Commission site plan review (Sec. 10.2202): every M-1 use, plus heavier manufacturing and processing including acetylene gas, ammonia and chlorine, automobile assembly and battery manufacture, boiler works, brick and clay products, chemical and dye manufacture, food processing, smoking, curing, and canning, freight classification yards, metal foundries, oil and gas drilling and production, paint and varnish manufacture, power plants, railroad repair shops, rolling mills, rubber and soap manufacture, rag and junk sorting and baling, tar products, wholesale petroleum storage, and wool pulling, plus industrial parks of at least 20 acres.",
      "citation": "Sec. 10.2202",
      "source_url": "https://library.municode.com/mi/macomb_township,_(macomb_co.)/codes/zoning",
      "sort_order": 1,
      "id": "c253f3231b0eb013d35186d67d42cde134f3faaff15ebf49308d9dac55b80576",
      "frame_index": 2729,
      "category": "industrial",
      "pack_version": 1
    },
    {
      "municipality_slug": "macomb-township",
      "district_code": "MR",
      "topic": "lot_coverage",
      "body_md": "Maximum lot coverage is **50 percent** (Sec. 10.2007.E). Performance standards cap noise at **60 decibels** at the site line, restrict smoke to Ringelmann No. 2, limit vibration to 0.003 inch displacement at the site line, and prohibit explosives storage (Sec. 10.2007.L).",
      "citation": "Sec. 10.2007.E",
      "source_url": "https://library.municode.com/mi/macomb_township,_(macomb_co.)/codes/zoning",
      "sort_order": 1,
      "id": "da231fe86d0e4af481a3e192fa821c2e888a0339bb1e7f5ebf022cb450d22ced",
      "frame_index": 2739,
      "category": "industrial",
      "pack_version": 1
    },
    {
      "municipality_slug": "macomb-township",
      "district_code": "R-1-E",
      "topic": "lot_coverage",
      "body_md": "All structures together may cover at most **30 percent** of the lot; decks and swimming pools are exempt (Sec. 10.0604.F).",
      "citation": "Sec. 10.0604.F",
      "source_url": "https://library.municode.com/mi/macomb_township,_(macomb_co.)/codes/zoning",
      "sort_order": 1,
      "id": "20d56e9603590295e6c05f671bf1ebe43cac3c74fb41684edb993fe4be94639e",
      "frame_index": 2767,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "macomb-township",
      "district_code": "R-1-S",
      "topic": "lot_coverage",
      "body_md": "All structures together may cover at most **30 percent** of the lot; decks and swimming pools are exempt from the cap (Sec. 10.0504.F).",
      "citation": "Sec. 10.0504.F",
      "source_url": "https://library.municode.com/mi/macomb_township,_(macomb_co.)/codes/zoning",
      "sort_order": 1,
      "id": "f75862c4c7539e48a1b04a72ed2dbddb5a395899f1e6c01f8d5a3119aab28c91",
      "frame_index": 2773,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "macomb-township",
      "district_code": "WH",
      "topic": "lot_size",
      "body_md": "A WH parcel needs at least **5 acres** with **300 feet** of width and depth, depth no more than 3 times width (Sec. 10.1906.A). Minimum building floor area is **700 square feet** (Sec. 10.1906.C).",
      "citation": "Sec. 10.1906.A",
      "source_url": "https://library.municode.com/mi/macomb_township,_(macomb_co.)/codes/zoning",
      "sort_order": 1,
      "id": "8967a275368aa705314129a566a77e320ba0085bd141a13e629df2a6b3614e70",
      "frame_index": 2810,
      "category": "industrial",
      "pack_version": 1
    },
    {
      "municipality_slug": "maricopa-az",
      "district_code": "C",
      "topic": "permitted_uses",
      "body_md": "Permanent open space including environmentally sensitive lands, wildlife corridors, waterways, and deserts; limits development where police/fire access, stormwater flooding protection, or erosion mitigation would impose excessive community costs. Abbreviation \"C\" independently confirmed against MCC 18.10.010's base-district list this session (earlier draft used the invented label \"OS-C\"). Caution: the bare letter \"C\" is also a use-table permit symbol (conditional use permit) elsewhere in Title 18; do not confuse this district code with that unrelated usage. review-gated: dimensional standards not captured this session (Table 18.55.030 is image-rendered on the source page); confirm MCC 18.55.030 directly.",
      "citation": "MCC 18.55.010; MCC 18.10.010",
      "source_url": "https://maricopa.municipal.codes/MCC/18.55.010",
      "sort_order": 1,
      "id": "92be410260b09ca52f29a77bf62d39e730f3f9f69f412bffa5d5b6faa4b02f07",
      "frame_index": 2822,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "maricopa-az",
      "district_code": "GO",
      "topic": "lot_size",
      "body_md": "Minimum lot area **10,000 square feet**. Minimum lot width **75 feet**. Minimum lot depth **100 feet**. Maximum density: n/a.",
      "citation": "Table 18.40.030",
      "source_url": "https://maricopa.municipal.codes/MCC/18.40.030",
      "sort_order": 1,
      "id": "98ac499c538b276168b35ee47b3bdda058f8f3433a38142f74355cad8a7297be",
      "frame_index": 2834,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "maricopa-az",
      "district_code": "LI",
      "topic": "lot_size",
      "body_md": "Minimum lot area **10,000 square feet**. Minimum lot width **100 feet**. Minimum lot depth **100 feet**.",
      "citation": "Table 18.50.030",
      "source_url": "https://maricopa.municipal.codes/MCC/18.50.030",
      "sort_order": 1,
      "id": "a3ee666b0fb38741b6fca4ef160b691d8540be7bd4fd85c2ff7c8fc2cb79eb09",
      "frame_index": 2846,
      "category": "industrial",
      "pack_version": 1
    },
    {
      "municipality_slug": "maricopa-az",
      "district_code": "RS-4",
      "topic": "permitted_uses",
      "body_md": "Single unit attached housing is permitted (P). Multiple-unit dwelling is permitted (P) per the sampled use table row. review-gated: confirm the complete Table 18.35.020 use row for RS-4 directly, since only a partial sample of the use table was captured this session.",
      "citation": "Table 18.35.020",
      "source_url": "https://maricopa.municipal.codes/MCC/18.35.020",
      "sort_order": 1,
      "id": "b1781b593155ce11be66b04107cad1a4b49715bb2dd9111e18ea73f033dbd0c7",
      "frame_index": 2893,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "mckinney-tx",
      "district_code": "C2",
      "topic": "height",
      "body_md": "Maximum **45 feet**.",
      "citation": "UDC Table 2-14 (Sec. 204O)",
      "source_url": "https://www.mckinneytexas.org/DocumentCenter/View/39456/Unified_Development_Code_20260303#page=74",
      "sort_order": 1,
      "id": "fac93b9e918a719162883032d7e31d55699666e2242f61bcc4794f1c5acadec6",
      "frame_index": 2933,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "mckinney-tx",
      "district_code": "R43",
      "topic": "lot_size",
      "body_md": "Minimum lot area **43,560 square feet** (one acre), minimum lot width **150 feet**, minimum lot depth **150 feet** (Table 2-3).",
      "citation": "UDC Table 2-3 (Sec. 204D); Table 2-24",
      "source_url": "https://www.mckinneytexas.org/DocumentCenter/View/39456/Unified_Development_Code_20260303#page=63",
      "sort_order": 1,
      "id": "6150b2003859e3357701a827ae101ff3d774df7c08c534e0f1002741c3f795a2",
      "frame_index": 2987,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "melissa-tx",
      "district_code": "*",
      "topic": "parking",
      "body_md": "In all single-family districts, a home needs a minimum of 2 enclosed garage parking spaces plus 2 paved spaces behind the front property line for stacking or maneuvering (Sec. 22.2(e)). Multifamily dwellings need 2 spaces for one- and two-bedroom units, plus 1 additional space per additional bedroom (Sec. 22.8(a)(18)). Nonresidential parking is set by use in the Sec. 22.8 table; for example, stand-alone restaurants need 1 space per 100 square feet of floor area and professional offices need 1 space per 350 square feet (Sec. 22.8(a)(36), (41)). Off-street loading is required for any nonresidential use of 50,000 square feet or more (Sec. 22.4).",
      "citation": "Sec. 22.2(e); Sec. 22.8",
      "source_url": "https://library.municode.com/tx/melissa/codes/code_of_ordinances?nodeId=CH12PLZO_ART12.300ZOORAD",
      "sort_order": 1,
      "id": "5134e4845b940bf78b286f273a5a48fe442cd67be18051a2df7c319e961c337b",
      "frame_index": 3012,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "melissa-tx",
      "district_code": "C-2",
      "topic": "lot_coverage",
      "body_md": "Maximum lot coverage **50 percent**. No minimum dwelling size is listed (C-2 is a commercial district).",
      "citation": "Sec. 21 Schedule of District Regulations",
      "source_url": "https://library.municode.com/tx/melissa/codes/code_of_ordinances?nodeId=CH12PLZO_ART12.300ZOORAD",
      "sort_order": 1,
      "id": "9d4ffa420341344fdf225bb5b2d6ff25d151b7b3373f75a6ec6e11fbb6d418f9",
      "frame_index": 3032,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "melissa-tx",
      "district_code": "SF-3",
      "topic": "permitted_uses",
      "body_md": "Single-family detached dwellings are permitted by right. Garage apartments, guest houses and cottages are permitted only by Specific Use Permit. The full use table is in Sec. 20 (Schedule of Uses and Parking Requirements).",
      "citation": "Sec. 11.2; Sec. 20 Schedule of Uses",
      "source_url": "https://library.municode.com/tx/melissa/codes/code_of_ordinances?nodeId=CH12PLZO_ART12.300ZOORAD",
      "sort_order": 1,
      "id": "b0d940a5ca53cc2ea9870c802a184a53478012250b3d2525fe5ef0864cd177b4",
      "frame_index": 3071,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "miramar-fl",
      "district_code": "MH",
      "topic": "lot_size",
      "body_md": "Minimum lot size **5 acres**, minimum lot width **250 feet**.",
      "citation": "Table 404-1",
      "source_url": "https://library.municode.com/fl/miramar/codes/land_development_code?nodeId=CH4ZO_ARTIITHDI_S404MIEDI",
      "sort_order": 1,
      "id": "4c773ec3bf0a117d54a4d4f9c930f0aae1f76d70ef4e2b6dd9113b870d5ce166",
      "frame_index": 3134,
      "category": "mixed",
      "pack_version": 2
    },
    {
      "municipality_slug": "miramar-fl",
      "district_code": "RL",
      "topic": "permitted_uses",
      "body_md": "Single family is permitted by right (P) in the RL/E/RS1 group (Table 402-1). Clustering of uses and dedication of open space in undeveloped areas is encouraged. Uses must be consistent with, but may be more restrictive than, the Rural FLUE category's permitted uses. Full use table with district-by-district (P), conditional (C), and specific-use-standard (*) markers is Table 402-1; specific use standards are in Sec. 405.",
      "citation": "Sec. 402.1; Table 402-1 (Residential Principal Uses Table)",
      "source_url": "https://library.municode.com/fl/miramar/codes/land_development_code?nodeId=CH4ZO_ARTIITHDI_S402REZODI",
      "sort_order": 1,
      "id": "55783a37341998935bc4d9ff0199e623229be44d5f95f99ee23238a151ca4e17",
      "frame_index": 3157,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "miramar-fl",
      "district_code": "RM4",
      "topic": "permitted_uses",
      "body_md": "Newer multi-family district similar to the TOC-RM district outside the Transit Oriented Corridor land use, giving flexibility for smaller, efficient structures. Table 402-3 gives dimensional standards by use category. Permitted-use table is Table 402-1, specific use standards in Sec. 405.",
      "citation": "Sec. 402.4; Table 402-3",
      "source_url": "https://library.municode.com/fl/miramar/codes/land_development_code?nodeId=CH4ZO_ARTIITHDI_S402REZODI",
      "sort_order": 1,
      "id": "c625f5702cd62128b328cd8881ba108369b49bf9e845795156e50a8fe9e17c57",
      "frame_index": 3177,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "miramar-fl",
      "district_code": "RS4",
      "topic": "lot_coverage",
      "body_md": "Not a fixed figure in Table 402-2 (N/A); confirm with a site plan review.",
      "citation": "Table 402-2",
      "source_url": "https://library.municode.com/fl/miramar/codes/land_development_code?nodeId=CH4ZO_ARTIITHDI_S402REZODI",
      "sort_order": 1,
      "id": "46ffeefbe3ef9d51710fd06025b3e6a66c1da6bc500e78d98d68fd763678a81c",
      "frame_index": 3200,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "miramar-fl",
      "district_code": "RS7",
      "topic": "lot_size",
      "body_md": "Minimum lot size **4,000 s.f.**, minimum lot width **50 feet**, minimum floor area **1,400 s.f.**",
      "citation": "Table 402-2",
      "source_url": "https://library.municode.com/fl/miramar/codes/land_development_code?nodeId=CH4ZO_ARTIITHDI_S402REZODI",
      "sort_order": 1,
      "id": "8986fda260bc01bb7dbcc174aa25cc723353ef64567b0ed8c664d458f78c71be",
      "frame_index": 3216,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "miramar-fl",
      "district_code": "T",
      "topic": "lot_coverage",
      "body_md": "Not a fixed figure in Table 402-2 (N/A); confirm with a site plan review.",
      "citation": "Table 402-2",
      "source_url": "https://library.municode.com/fl/miramar/codes/land_development_code?nodeId=CH4ZO_ARTIITHDI_S402REZODI",
      "sort_order": 1,
      "id": "cfb6b4e4bf59378038c16924034e5717b7cfdd18127fff7d64103b1eda67b71a",
      "frame_index": 3225,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "miramar-fl",
      "district_code": "TND",
      "topic": "permitted_uses",
      "body_md": "New or revitalized neighborhoods on a network of interconnected, pedestrian-oriented streets with a mixture of housing types, civic buildings, and stores/offices/workplaces. TND's own dimensional standards are in Sec. 714, not Table 404-1; the minimum lot size for a TND is a project-level standard set in Sec. 714, not a single per-lot figure. Live Local Act eligible (Sec. 409.5).",
      "citation": "Sec. 404.2; Sec. 714",
      "source_url": "https://library.municode.com/fl/miramar/codes/land_development_code?nodeId=CH7USRE_S714TRNEDETNDI",
      "sort_order": 1,
      "id": "d3964c94e46bf5dc200c46d2a2a49f5bdb4be6fd9259cfb2175983e7bb86c82a",
      "frame_index": 3227,
      "category": "mixed",
      "pack_version": 2
    },
    {
      "municipality_slug": "miramar-fl",
      "district_code": "TOC-SD",
      "topic": "permitted_uses",
      "body_md": "The GIS layer merges three legally distinct TOC Special Districts under one code. SD1 (art and entertainment venue, former B3 land near SW 60th Way) allows uses related to art, culture, and design, plus Mixed-Use High functions for buildings fronting State Road 7 (Sec. 715.3.5). SD2 (former Open Space) permits only open space/passive recreation, publicly operated campgrounds, boat ramps/docks, outdoor civic/cultural/educational facilities, and parks (Sec. 715.3.6.3(C)). SD3 (former Community Facility) permits parks, places of public assembly, libraries, cultural/civic/community centers, municipal government and public safety facilities, with government-sponsored care facilities, hospitals, non-municipal government buildings, and certain nonprofit uses allowed by administrative approval (Sec. 715.3.7.3(f)). Confirm which sub-area applies to a specific parcel before relying on a single set of standards.",
      "citation": "Sec. 715.3.5 (SD1); Sec. 715.3.6 (SD2/Open Space); Sec. 715.3.7 (SD3/Community Facility)",
      "source_url": "https://library.municode.com/fl/miramar/codes/land_development_code?nodeId=CH7USRE_S715TRORCODICO",
      "sort_order": 1,
      "id": "fb6d4ef9d93de86d7c586133ae8b849fa1c9c7d86432bc30bb5a9dfa7cae24a4",
      "frame_index": 3246,
      "category": "special",
      "pack_version": 2
    },
    {
      "municipality_slug": "mooresville-nc",
      "district_code": "CU",
      "topic": "permitted_uses",
      "body_md": "CU appears in the live Mooresville GIS zoning layer but was not found as a current Chapter 3 base district section heading in the May 2025 UDO. Treat it as a legacy or map-specific code and confirm with Planning before applying base district standards.",
      "citation": "GIS distinct zoning values; UDO Chapter 3 comparison",
      "source_url": "https://www.mooresvillenc.gov/Site%20Documents/Planning/UDO%20Adopted%20May%205%202025.pdf",
      "sort_order": 1,
      "id": "7925528761f1f8eb51b26e89ccd89c94736650fbe613a3853db04f19006c575c",
      "frame_index": 3275,
      "category": "special",
      "pack_version": 2
    },
    {
      "municipality_slug": "mooresville-nc",
      "district_code": "HMV",
      "topic": "permitted_uses",
      "body_md": "Uses in HMV are controlled by Table 4-1. Legend: P permitted, Z conditional zoning, S special use, A accessory only, T temporary only, blank cell not allowed. The use matrix is review gated to snapshots use-table-195.png through use-table-200.png because column extraction is fragile.",
      "citation": "Chapter 4, Table 4-1: Use Permissions",
      "source_url": "https://www.mooresvillenc.gov/Site%20Documents/Planning/UDO%20Adopted%20May%205%202025.pdf",
      "sort_order": 1,
      "id": "8a7f910704b52abc71583ce56e66a9f3c9f921eb14f271ed897b55118037af93",
      "frame_index": 3287,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "mooresville-nc",
      "district_code": "PD",
      "topic": "setbacks",
      "body_md": "Front setback: as established in the PD Plan and PD Agreement. Side setback: as established in the PD Plan and PD Agreement. Rear setback: as established in the PD Plan and PD Agreement.",
      "citation": "Sec. 3.5; Table 3-15",
      "source_url": "https://www.mooresvillenc.gov/Site%20Documents/Planning/UDO%20Adopted%20May%205%202025.pdf",
      "sort_order": 1,
      "id": "6a33059c7819586455a4243b4ffab263bfd9b42b484877aecd58944fa6f7e7d4",
      "frame_index": 3300,
      "category": "special",
      "pack_version": 2
    },
    {
      "municipality_slug": "mooresville-nc",
      "district_code": "RLI",
      "topic": "lot_size",
      "body_md": "Minimum lot area is 10,000 sf; minimum lot width is 40 ft at right-of-way and 70 ft at front setback.",
      "citation": "Sec. 3.2.4; Table 3-5",
      "source_url": "https://www.mooresvillenc.gov/Site%20Documents/Planning/UDO%20Adopted%20May%205%202025.pdf",
      "sort_order": 1,
      "id": "fb78308957a9145b0f04a226a4e25cfe0119c392ca292b3d6d64c5e7d1f5bcb9",
      "frame_index": 3318,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "mooresville-nc",
      "district_code": "RLS",
      "topic": "height",
      "body_md": "Maximum building height is 3 stories.",
      "citation": "Sec. 3.2.3; Table 3-4",
      "source_url": "https://www.mooresvillenc.gov/Site%20Documents/Planning/UDO%20Adopted%20May%205%202025.pdf",
      "sort_order": 1,
      "id": "ef3f9c1f5633a22278b8a310724fa0406939ab31ec229c9041f8856f525243e3",
      "frame_index": 3321,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "mount-juliet-tn",
      "district_code": "CMU",
      "topic": "lot_coverage",
      "body_md": "Maximum building coverage in CMU is **50 percent**. Maximum impervious surface ratio is **80 percent** (Section 6-103, Table 6-103a).",
      "citation": "Section 6-103, Table 6-103a",
      "source_url": "https://library.municode.com/tn/mt._juliet/codes/land_development_code",
      "sort_order": 1,
      "id": "ffac83edc0b6d63fec4d8154ae314d323a713ee96226d8886dd2a5f07d0ef8fb",
      "frame_index": 3366,
      "category": "mixed",
      "pack_version": 4
    },
    {
      "municipality_slug": "mount-juliet-tn",
      "district_code": "CNS-PUD",
      "topic": "setbacks",
      "body_md": "Do not rely on generic base-district setbacks alone for CNS-PUD. The approved PUD plan and conditions may set parcel-specific setbacks, yards, open space, buffering, and dimensional standards (Sections 8-201 through 8-208).",
      "citation": "Sections 8-201 through 8-208",
      "source_url": "https://library.municode.com/tn/mt._juliet/codes/land_development_code",
      "sort_order": 1,
      "id": "e3f5ab706d6bc6c49b1b324823fb4f6918745585ecf7d1b76801a24eab29554f",
      "frame_index": 3376,
      "category": "special",
      "pack_version": 4
    },
    {
      "municipality_slug": "mount-juliet-tn",
      "district_code": "CTC-PUD",
      "topic": "setbacks",
      "body_md": "Do not rely on generic base-district setbacks alone for CTC-PUD. The approved PUD plan and conditions may set parcel-specific setbacks, yards, open space, buffering, and dimensional standards (Sections 8-201 through 8-208).",
      "citation": "Sections 8-201 through 8-208",
      "source_url": "https://library.municode.com/tn/mt._juliet/codes/land_development_code",
      "sort_order": 1,
      "id": "00f9d1ce7be0e36630b64c2e6f191e1e4e354dceb2734fcf8003765b85edfcca",
      "frame_index": 3390,
      "category": "mixed",
      "pack_version": 4
    },
    {
      "municipality_slug": "mount-juliet-tn",
      "district_code": "I-R",
      "topic": "lot_coverage",
      "body_md": "Maximum building coverage is **50 percent**. Maximum impervious surface ratio is **80 percent** for lots of two acres or less and **70 percent** for lots greater than two acres (Section 7-103, Table 7-103A).",
      "citation": "Section 7-103, Table 7-103A",
      "source_url": "https://library.municode.com/tn/mt._juliet/codes/land_development_code",
      "sort_order": 1,
      "id": "3b04cb6663044f939fc7d2823b094acf3f72194a5e62ff4a5057ead64d66557d",
      "frame_index": 3399,
      "category": "industrial",
      "pack_version": 4
    },
    {
      "municipality_slug": "mount-juliet-tn",
      "district_code": "RM-8-PUD",
      "topic": "permitted_uses",
      "body_md": "This GIS value indicates RM-8 with PUD controls. Use the base district as context only. The controlling uses, density, layout, open space, phasing, and conditions may be in the approved PUD plan, ordinance, or development agreement (Sections 8-201 through 8-208).",
      "citation": "Sections 8-201 through 8-208",
      "source_url": "https://library.municode.com/tn/mt._juliet/codes/land_development_code",
      "sort_order": 1,
      "id": "c5b748ae4c809a30b0f184131392d4398ad09ae62d83fbfaaf21f445db2b2c20",
      "frame_index": 3435,
      "category": "special",
      "pack_version": 4
    },
    {
      "municipality_slug": "mount-juliet-tn",
      "district_code": "RS-10",
      "topic": "height",
      "body_md": "The current table points maximum height to the adopted IRC, IBC, and IFC rather than a fixed zoning number. Treat height as code-dependent and confirm the applicable building-code limit and any fire-access condition before design (Section 5-103, Table 5-103a).",
      "citation": "Section 5-103, Table 5-103a",
      "source_url": "https://library.municode.com/tn/mt._juliet/codes/land_development_code",
      "sort_order": 1,
      "id": "7d93a94974b9b72e4ba5a69f5da8af2e0a564fd3dbaeeab51cedd8d089c47161",
      "frame_index": 3439,
      "category": "residential",
      "pack_version": 4
    },
    {
      "municipality_slug": "mount-juliet-tn",
      "district_code": "RS-20",
      "topic": "height",
      "body_md": "The current table points maximum height to the adopted IRC, IBC, and IFC rather than a fixed zoning number. Treat height as code-dependent and confirm the applicable building-code limit and any fire-access condition before design (Section 5-103, Table 5-103a).",
      "citation": "Section 5-103, Table 5-103a",
      "source_url": "https://library.municode.com/tn/mt._juliet/codes/land_development_code",
      "sort_order": 1,
      "id": "c9aa765710eb3820b7ac2bde763eccea51fe1da1cd4245b59f1b0c74eb153a90",
      "frame_index": 3453,
      "category": "residential",
      "pack_version": 4
    },
    {
      "municipality_slug": "murfreesboro-tn",
      "district_code": "CH",
      "topic": "setbacks",
      "body_md": "CH yard standards: front 42 ft, side 10 ft if adjacent to residential zoning or use under endnote 6, rear 20 ft. Corner lots, major arterial front yards, flag lots, accessory structures, airport limits, and overlays may change the practical result.",
      "citation": "Chart 2 and Chart 2 endnotes",
      "source_url": "https://www.murfreesborotn.gov/DocumentCenter/View/7181/Zoning-Ordinance--2026-Appendix-A-05212026-PDF",
      "sort_order": 1,
      "id": "00aca5891c3eb86d92228a6987bdbd13cad93aab6e9e410be8e4df6fd4165c9e",
      "frame_index": 3501,
      "category": "commercial",
      "pack_version": 5
    },
    {
      "municipality_slug": "murfreesboro-tn",
      "district_code": "CM-R",
      "topic": "height",
      "body_md": "CM-R maximum height: 60 ft for medical offices, clinics, and related uses; 35 ft for residential rows. Airport Overlay limits and accessory-structure standards can be more restrictive.",
      "citation": "Chart 2 and Chart 2 endnotes",
      "source_url": "https://www.murfreesborotn.gov/DocumentCenter/View/7181/Zoning-Ordinance--2026-Appendix-A-05212026-PDF",
      "sort_order": 1,
      "id": "76242297ab8a0d4e6792e09984690d9807c99ab13f6bf074d6114a6dfbf6cf84",
      "frame_index": 3520,
      "category": "mixed",
      "pack_version": 5
    },
    {
      "municipality_slug": "murfreesboro-tn",
      "district_code": "CU",
      "topic": "special_land_uses",
      "body_md": "Special permit uses in CU are shown with S in Chart 1 and require the procedures in Section 8 and the use standards in Section 9. The pack does not infer special-permit eligibility from similar uses.",
      "citation": "Sections 8 and 9; Chart 1 Endnotes",
      "source_url": "https://www.murfreesborotn.gov/DocumentCenter/View/7181/Zoning-Ordinance--2026-Appendix-A-05212026-PDF",
      "sort_order": 3,
      "id": "db87fbeb07d53e4ec6cfcfb301ccd5e80d15daaa5e3d5a5eecff43893b869049",
      "frame_index": 3531,
      "category": "special",
      "pack_version": 5
    },
    {
      "municipality_slug": "murfreesboro-tn",
      "district_code": "CU",
      "topic": "lot_size",
      "body_md": "CU lot standards: single-family minimum 10,000 sq ft and 65 ft width; two-family 10,000 sq ft; three-family 15,000 sq ft; four-family 20,000 sq ft; multiple-family and educational rows 25,000 sq ft and 65 ft width. Confirm endnote conditions, overlays, planned-development approvals, and recorded site-plan conditions before relying on a parcel-specific number.",
      "citation": "Chart 2",
      "source_url": "https://www.murfreesborotn.gov/DocumentCenter/View/7181/Zoning-Ordinance--2026-Appendix-A-05212026-PDF",
      "sort_order": 1,
      "id": "d969abf1b0e5a8c6cf4e75dc7770a743d496e47a67202fea4db737ccc1c1f07f",
      "frame_index": 3535,
      "category": "special",
      "pack_version": 5
    },
    {
      "municipality_slug": "murfreesboro-tn",
      "district_code": "H-I",
      "topic": "lot_size",
      "body_md": "H-I lot standards: no minimum lot area; 50 ft minimum width. Confirm endnote conditions, overlays, planned-development approvals, and recorded site-plan conditions before relying on a parcel-specific number.",
      "citation": "Chart 2",
      "source_url": "https://www.murfreesborotn.gov/DocumentCenter/View/7181/Zoning-Ordinance--2026-Appendix-A-05212026-PDF",
      "sort_order": 1,
      "id": "9de19fce1780bf37eae1fb97c9106bdcbf69185c542e0386c7367002c5ed1d73",
      "frame_index": 3552,
      "category": "industrial",
      "pack_version": 5
    },
    {
      "municipality_slug": "murfreesboro-tn",
      "district_code": "OG",
      "topic": "permitted_uses",
      "body_md": "Uses in OG are controlled by Chart 1. X means permitted by right subject to site plan review and building permits; S means site plan review plus special use permit under Sections 8 and 9; a blank cell means prohibited. Commercial and institutional rows can also have endnote conditions.",
      "citation": "Chart 1 and Chart 1 Endnotes",
      "source_url": "https://www.murfreesborotn.gov/DocumentCenter/View/7181/Zoning-Ordinance--2026-Appendix-A-05212026-PDF",
      "sort_order": 2,
      "id": "d5639d2f7bc54d925174041e1e94eac8c4f14023b227d8364dcb19bc92d20b2f",
      "frame_index": 3565,
      "category": "commercial",
      "pack_version": 5
    },
    {
      "municipality_slug": "murfreesboro-tn",
      "district_code": "OG",
      "topic": "lot_coverage",
      "body_md": "OG intensity controls: 0.3 maximum FAR, 0.28 minimum LSR, and 0.6 minimum OSR; no lot coverage cap is listed. Where Chart 2 uses FAR, LSR, OSR, or density instead of lot coverage, this pack does not convert those formulas into a guessed lot coverage number. (Corrected 2026-07-02 with the exact Chart 2 ratios.)",
      "citation": "Chart 2",
      "source_url": "https://www.murfreesborotn.gov/DocumentCenter/View/7181/Zoning-Ordinance--2026-Appendix-A-05212026-PDF",
      "sort_order": 1,
      "id": "4f85126f843b271855c18607f21ee55a5a5e0374411f8f94010fd553f8e6778d",
      "frame_index": 3569,
      "category": "commercial",
      "pack_version": 5
    },
    {
      "municipality_slug": "murfreesboro-tn",
      "district_code": "OG",
      "topic": "lot_size",
      "body_md": "OG lot standards: 5,000 sq ft minimum lot area and 50 ft minimum lot width for offices and other uses. Confirm endnote conditions, overlays, planned-development approvals, and recorded site-plan conditions before relying on a parcel-specific number. (Corrected 2026-07-02: Chart 2 lists a single OG row with these values.)",
      "citation": "Chart 2",
      "source_url": "https://www.murfreesborotn.gov/DocumentCenter/View/7181/Zoning-Ordinance--2026-Appendix-A-05212026-PDF",
      "sort_order": 1,
      "id": "617be577523d5ec088526935435a0e7287d9bd656cab117f2ba3ec2692755f5d",
      "frame_index": 3570,
      "category": "commercial",
      "pack_version": 5
    },
    {
      "municipality_slug": "murfreesboro-tn",
      "district_code": "OG-R",
      "topic": "setbacks",
      "body_md": "OG-R yard standards: office row front 30 ft, side 10 ft, rear 20 ft; single-family row front 35 ft, side 10 ft, rear 20 ft; two- through four-family rows front 30 ft, side 10 ft, rear 20 ft. Corner lots, major arterial front yards, flag lots, accessory structures, airport limits, and overlays may change the practical result.",
      "citation": "Chart 2 and Chart 2 endnotes",
      "source_url": "https://www.murfreesborotn.gov/DocumentCenter/View/7181/Zoning-Ordinance--2026-Appendix-A-05212026-PDF",
      "sort_order": 1,
      "id": "623ac42ef8b7edb670132558291f8b7335e8a3fcabc5dcdc58da2cecead13e20",
      "frame_index": 3573,
      "category": "mixed",
      "pack_version": 5
    },
    {
      "municipality_slug": "murfreesboro-tn",
      "district_code": "P",
      "topic": "permitted_uses",
      "body_md": "Uses in P are controlled by Chart 1. X means permitted by right subject to site plan review and building permits; S means site plan review plus special use permit under Sections 8 and 9; a blank cell means prohibited. Commercial and institutional rows can also have endnote conditions.",
      "citation": "Chart 1 and Chart 1 Endnotes",
      "source_url": "https://www.murfreesborotn.gov/DocumentCenter/View/7181/Zoning-Ordinance--2026-Appendix-A-05212026-PDF",
      "sort_order": 2,
      "id": "fb1fcede57eb35a86920833dfae51842174d180ced784e23e17386f756d01137",
      "frame_index": 3577,
      "category": "special",
      "pack_version": 5
    },
    {
      "municipality_slug": "murfreesboro-tn",
      "district_code": "PND",
      "topic": "setbacks",
      "body_md": "PND dimensional standards are controlled by the approved planned development and conditions. Section 13 requires planned development review and legislative approval, so a parcel-specific plan is necessary.",
      "citation": "Section 13",
      "source_url": "https://www.murfreesborotn.gov/DocumentCenter/View/7181/Zoning-Ordinance--2026-Appendix-A-05212026-PDF",
      "sort_order": 2,
      "id": "4f043ff7c8f27c6b411eb0fd5e60b3c734258362d9c4f26c39595a6a06bd208c",
      "frame_index": 3588,
      "category": "special",
      "pack_version": 5
    },
    {
      "municipality_slug": "murfreesboro-tn",
      "district_code": "R-D",
      "topic": "permitted_uses",
      "body_md": "Uses in R-D are controlled by Chart 1. X means permitted by right subject to site plan review and building permits; S means site plan review plus special use permit under Sections 8 and 9; a blank cell means prohibited. Commercial and institutional rows can also have endnote conditions.",
      "citation": "Chart 1 and Chart 1 Endnotes",
      "source_url": "https://www.murfreesborotn.gov/DocumentCenter/View/7181/Zoning-Ordinance--2026-Appendix-A-05212026-PDF",
      "sort_order": 2,
      "id": "43a8bd389e2beb44480c69f63c0e3d1c8eca7cb76be22e43a09da7f8d0587eac",
      "frame_index": 3594,
      "category": "residential",
      "pack_version": 5
    },
    {
      "municipality_slug": "murfreesboro-tn",
      "district_code": "R-MO",
      "topic": "lot_coverage",
      "body_md": "R-MO intensity controls: 10.9 dwelling units per acre maximum gross density. Where Chart 2 uses FAR, LSR, OSR, or density instead of lot coverage, this pack does not convert those formulas into a guessed lot coverage number.",
      "citation": "Chart 2",
      "source_url": "https://www.murfreesborotn.gov/DocumentCenter/View/7181/Zoning-Ordinance--2026-Appendix-A-05212026-PDF",
      "sort_order": 1,
      "id": "d721e223d3a2e7a0c753bce5fbdfd4a0658e92259517646ed8bf2a501b5b9025",
      "frame_index": 3604,
      "category": "residential",
      "pack_version": 5
    },
    {
      "municipality_slug": "murfreesboro-tn",
      "district_code": "RS-12",
      "topic": "special_land_uses",
      "body_md": "Special permit uses in RS-12 are shown with S in Chart 1 and require the procedures in Section 8 and the use standards in Section 9. The pack does not infer special-permit eligibility from similar uses.",
      "citation": "Sections 8 and 9; Chart 1 Endnotes",
      "source_url": "https://www.murfreesborotn.gov/DocumentCenter/View/7181/Zoning-Ordinance--2026-Appendix-A-05212026-PDF",
      "sort_order": 3,
      "id": "45642b99cfc66f79da69354d7de745c38cdbb960e33b3fca3af432bfa14c0b72",
      "frame_index": 3625,
      "category": "residential",
      "pack_version": 5
    },
    {
      "municipality_slug": "murfreesboro-tn",
      "district_code": "RS-6",
      "topic": "setbacks",
      "body_md": "RS-6 yard standards: front 35 ft, side 5 ft, rear 20 ft. Corner lots, major arterial front yards, flag lots, accessory structures, airport limits, and overlays may change the practical result.",
      "citation": "Chart 2 and Chart 2 endnotes",
      "source_url": "https://www.murfreesborotn.gov/DocumentCenter/View/7181/Zoning-Ordinance--2026-Appendix-A-05212026-PDF",
      "sort_order": 1,
      "id": "6d070cd73ab3b13213dafa1c8aed5e587c9cf198d6bea0c1175f2e882b483b0a",
      "frame_index": 3644,
      "category": "residential",
      "pack_version": 5
    },
    {
      "municipality_slug": "murfreesboro-tn",
      "district_code": "RS-8",
      "topic": "lot_size",
      "body_md": "RS-8 lot standards: 8,000 sq ft minimum lot area and 55 ft minimum lot width. Confirm endnote conditions, overlays, planned-development approvals, and recorded site-plan conditions before relying on a parcel-specific number.",
      "citation": "Chart 2",
      "source_url": "https://www.murfreesborotn.gov/DocumentCenter/View/7181/Zoning-Ordinance--2026-Appendix-A-05212026-PDF",
      "sort_order": 1,
      "id": "f641f994767ee2c92e0181b4533b6babcf82533a5e68414c7b420e491180e4d6",
      "frame_index": 3653,
      "category": "residential",
      "pack_version": 5
    },
    {
      "municipality_slug": "murfreesboro-tn",
      "district_code": "RS-A2",
      "topic": "height",
      "body_md": "RS-A2 uses the RS-A Type 2 row maximum height of 35 ft, subject to overlay and airport limits.",
      "citation": "Chart 2",
      "source_url": "https://www.murfreesborotn.gov/DocumentCenter/View/7181/Zoning-Ordinance--2026-Appendix-A-05212026-PDF",
      "sort_order": 1,
      "id": "238c69eb427b71444d8fded0e9cd82246957620d9deedf25053b204996581a93",
      "frame_index": 3666,
      "category": "residential",
      "pack_version": 5
    },
    {
      "municipality_slug": "novi",
      "district_code": "CW",
      "topic": "permitted_uses",
      "body_md": "Permitted by right in City West (Section 3.1.30.B, amended by Ord. 18.296, 5-20-2024): offices including medical, municipal uses, financial institutions (Section 4.81), retail business or service establishments including restaurants (Section 4.27), business schools, instructional centers (Section 4.62), day care centers (Section 4.12.2), non-profit community centers, outdoor theaters, plazas, and farmers markets, art galleries and museums, personal services, indoor and outdoor private recreation, public parks, transit stations, brewpubs and microbreweries (Section 4.35), outdoor restaurants (Section 4.84), off-street parking lots and structures, similar uses, and accessory structures other than drive-through windows.\n\nSpecial land uses (Section 3.1.30.D) include amusement and entertainment uses, private clubs and cultural facilities, places of worship, accessory drive-throughs (Section 5.3.11), and veterinary clinics (Section 4.31). A Mixed-Use Development Option under Section 3.34 adds residential and hotels with greater height and density. Base standards include a **minimum** building height of 20 feet and a **maximum** of 2 stories, relaxable under the Mixed-Use Development Option, plus 100 foot parking setbacks: rear where adjacent to existing residential zoning, and side where adjacent to existing single-family residential (Section 3.1.30.E; Section 3.33.1.F). This pack covers CW at summary level; consult Sections 3.33 and 3.34 for details.",
      "citation": "Section 3.1.30; Section 3.33; Section 3.34",
      "source_url": "https://cityofnovi.org/media/zqhhe0zr/zoningordinance.pdf",
      "sort_order": 1,
      "id": "345dd317455d5ea43ca5eb67048c7998168704bb2f8085fa62950fdda3bb0bac",
      "frame_index": 3698,
      "category": "mixed",
      "pack_version": 1
    },
    {
      "municipality_slug": "novi",
      "district_code": "NCC",
      "topic": "lot_size",
      "body_md": "An NCC site needs at least **2 acres** and **200 feet** of width (Section 3.1.20.D). Floor area is capped at 25 percent of the site (a floor area ratio of 0.25), and at least 25 percent of the site must remain greenspace, excluding parking lots and aisles (Section 3.16).",
      "citation": "Section 3.1.20.D; Section 3.16",
      "source_url": "https://cityofnovi.org/media/zqhhe0zr/zoningordinance.pdf",
      "sort_order": 1,
      "id": "fcc973384bf0d24c14fcf6459db3abe5acf0e71431b7c52595846d59455d4a4f",
      "frame_index": 3724,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "novi",
      "district_code": "RM-1",
      "topic": "special_land_uses",
      "body_md": "Special land uses in RM-1 (Section 3.1.7.C): convalescent homes, assisted living facilities, hospice care facilities, and child care centers, which need 1,500 square feet of land per bed and, for child care centers, 100 square feet of outdoor play area per child with a minimum 2,800 square feet of fenced outdoor play area, no building closer than 40 feet to any property line (Section 4.21), plus accessory buildings and uses incident to those uses. A public hearing under Section 6.2 is required.",
      "citation": "Section 3.1.7.C; Section 4.21; Section 6.2",
      "source_url": "https://cityofnovi.org/media/zqhhe0zr/zoningordinance.pdf",
      "sort_order": 1,
      "id": "a10c34c1a0821ebb80a41ee4d4b126edecc774d28c5b13b6e597d94419ba0f6e",
      "frame_index": 3780,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "novi",
      "district_code": "TC-1",
      "topic": "height",
      "body_md": "Maximum **65 feet or 5 stories**, whichever is less, with exceptions and additional requirements for TC-1 in Section 3.27.2.A (Section 3.1.26.D).",
      "citation": "Section 3.27.1.B; Section 3.27.2.A",
      "source_url": "https://cityofnovi.org/media/zqhhe0zr/zoningordinance.pdf",
      "sort_order": 1,
      "id": "b7d9b5291ac883b700381cc30bdd6de4063ec991678ea5211191130b4c09ac1c",
      "frame_index": 3808,
      "category": "mixed",
      "pack_version": 1
    },
    {
      "municipality_slug": "orion-township",
      "district_code": "*",
      "topic": "parking",
      "body_md": "Article XXVII sets the township-wide parking machinery; the numeric ratios live in each district's own article (Section 27.04.A.2.h.vi).\n\n- Residential parking consists of a parking strip, driveway, garage, or combination on the premises served (Section 27.04.A.2.b). The ordinance states no numeric single-family space minimum in the sections verified for this pack; the closest thing is a group-day-care footnote that caps employee parking \"in addition to the two (2) required for the residence\" (Section 5.02.I.2; Section 6.02.L.2), which implies a two-space assumption without stating a rule. Confirm any requirement with the township.\n- A standard space is **9 by 19 feet** (9 by 22 for parallel), with a **22 foot** aisle for 90 degree parking (Section 27.04.A.3, dimension table). Non-residential lots need accessible spaces per the Section 27.04.A.2.h table, 13 feet wide, or 16 feet for van spaces.\n- Non-residential parking areas must be within 300 feet of the use, hard surfaced, curbed, drained on site, and screened from adjoining residential property; a default **20 foot** setback applies between parking and property lines unless the district sets its own (Section 27.04.A.2.a; Section 27.04.A.3). Surfacing must be concrete, asphalt, or an equivalent hard, dustless surface, and how far that requirement reaches into single-family driveways is not spelled out, so confirm before installing gravel.\n- Unlicensed or inoperable vehicles may not be kept outdoors in residential districts, with a 15 day grace period for ordinary repairs (Section 27.04.C.2.a).\n- Recreational vehicles (trailers, motor homes, boats, snowmobiles): owners may store their own, licensed and operable, in the side or rear yard at least **10 feet** from side and rear lot lines. In SF, SE, and SR, one RV or one RV trailer may also sit in the front yard outside the required front setback. In R-1, R-2, and R-3, one may sit in the front yard with at least **20 feet** between the street edge and the vehicle. Storage within 10 feet of a property line in the front yard area needs a Building Department permit (Section 27.04.C.2.c).\n- A stored travel trailer or motor home may not be connected to sanitary facilities or used as a dwelling; temporary occupancy needs a permit and is capped at three months per year, no more than six consecutive weeks (Section 27.04.C.2.a.i; Section 27.02.C).\n- One commercial vehicle per dwelling may be parked in residential districts, capped at **9 feet** tall and **21 feet** long with one rear axle and a 3 ton payload; dump trucks, semi-tractors, and construction equipment are excluded. Parcels over 5 acres are exempt but must keep commercial vehicles 100 feet off property lines, maximum two (Section 5.02.A; Section 6.02.B).",
      "citation": "Section 27.04",
      "source_url": "https://cms9files.revize.com/oriontwp/Zoning%20Ordinance/section%2027%20Final.pdf",
      "sort_order": 1,
      "id": "ab37fb4608d2f2aa50113cc4a05b7bc7640b372d9165e6ac5756f77e26dc7595",
      "frame_index": 3809,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "orion-township",
      "district_code": "*",
      "topic": "adu",
      "body_md": "Orion Township's zoning ordinance has no accessory dwelling unit provision. The terms accessory dwelling and accessory apartment appear nowhere in the definitions or the general provisions verified for this pack, and several rules actively point the other way:\n\n- Basement residency is expressly prohibited township-wide, except for earth-sheltered homes as defined in Article II (Section 27.02.H).\n- A temporary building, motor home, trailer, or incomplete structure may not be used as a dwelling without Zoning Board of Appeals approval, and then only during disaster repairs, for up to three months at a time (Section 27.02.C).\n- A mobile home may not be placed on a lot that already has a dwelling (Section 5.02.K.1.a; Section 6.02.A.1.a).\n- Even the narrow lakefront second-garage exception expressly bans overnight habitation in the detached building (Section 27.02.A.1.e).\n\nThis is a reading of what the ordinance does not contain, so treat it as a starting point rather than a final answer. A second dwelling unit on a single-family lot would need a rezoning, a use variance, or a future ordinance amendment. Michigan law also protects certain state-licensed residential facilities regardless of local zoning. Confirm any plan with the Planning & Zoning Department at 248-391-0304 ext. 5000.",
      "citation": "Section 27.02; Article II",
      "source_url": "https://cms9files.revize.com/oriontwp/Zoning%20Ordinance/section%2027%20Final.pdf",
      "sort_order": 1,
      "id": "e03725ea882a2b97da6a9b97f0f65c9f03986d0f71a311bc6e5806828a47efb4",
      "frame_index": 3810,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "orion-township",
      "district_code": "BIZ",
      "topic": "permitted_uses",
      "body_md": "The Brown Road Innovation Zone allows mixed industrial and commercial development in a visually cohesive district along Brown Road, encouraging shared access, lot combinations, redevelopment, and low impact design (Section 34.00). Article XXXIV carries its own use lists and development standards separate from the rest of the ordinance, so do not apply the general district tables to BIZ parcels. Confirm any BIZ proposal against Article XXXIV with the Planning & Zoning Department.",
      "citation": "Section 34.00; Article XXXIV",
      "source_url": "https://cms9files.revize.com/oriontwp/Zoning%20Ordinance/section%2034%20Final.pdf",
      "sort_order": 1,
      "id": "bde88fba92c760f438c939a20cc24336b36591328f5c91e59eac626d5397ed27",
      "frame_index": 3816,
      "category": "mixed",
      "pack_version": 1
    },
    {
      "municipality_slug": "orion-township",
      "district_code": "GB",
      "topic": "permitted_uses",
      "body_md": "General Business is the township's broad commercial district. Unless approved as a special use, a single retail or service tenant may not exceed **55,000 square feet** of gross floor area (Section 14.01).\n\nPermitted by right (Section 14.01): health clubs, small indoor recreation studios, bowling alleys, theaters (one-story freestanding, Section 14.02.B), auto parts stores, automobile dealerships and used car sales, automobile repair and service without gasoline sales, car washes (enclosed, sewer required, Section 14.02.C), recreational vehicle sales, bars and lounges, restaurants without drive-throughs, outdoor patios with administrative review (Section 14.02.E), catering, day-to-day retail, grocery stores, furniture and appliance stores, florists and garden shops, home improvement stores under 55,000 square feet, lumber yards, convenience stores without gasoline, pharmacies including drive-through pharmacy (Section 14.02.A conditions), specialty food stores, outdoor display areas up to 1,000 square feet (Section 14.02.G), contractor showrooms, dry cleaning and laundromats, printing under 10,000 square feet, shipping stores, appliance repair, banks including drive-through (Section 14.02.A conditions), personal services, pet grooming and daycare (Section 14.02.H), real estate offices, travel agencies, professional and medical offices, veterinary clinics, music and trade schools, private schools, public facilities, private clubs and places of worship, public transportation facilities, and PUDs.\n\nOutdoor storage as an accessory use follows Section 27.19. Unlisted uses need a similar-use determination (Section 27.02.E).",
      "citation": "Section 14.01",
      "source_url": "https://cms9files.revize.com/oriontwp/Zoning%20Ordinance/section%2014%20Final.pdf",
      "sort_order": 1,
      "id": "780db8cd7418126b821fc0725001f7a7a3783c7cea56783ad9c4737b8b40703e",
      "frame_index": 3817,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "orion-township",
      "district_code": "GB",
      "topic": "height",
      "body_md": "Maximum **25 feet** for all structures (Section 14.04).",
      "citation": "Section 14.04",
      "source_url": "https://cms9files.revize.com/oriontwp/Zoning%20Ordinance/section%2014%20Final.pdf",
      "sort_order": 1,
      "id": "41f509d467c4d951dbbbfa2c0f3f1a116708541ecd05ba7b956555e97b1ca5a3",
      "frame_index": 3820,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "orion-township",
      "district_code": "IP",
      "topic": "permitted_uses",
      "body_md": "Industrial Park provides for industrial subdivisions, condominiums, or stand-alone industrial development in a park-like setting, with full roads and utilities and generous setbacks and greenbelts. The township's stated intent is to house activities similar to the Limited Industrial district (Section 18.00). The district's own use matrix in Section 18.01 controls which uses are by right and which are special; confirm a specific use against that matrix with the Planning & Zoning Department.",
      "citation": "Section 18.00; Section 18.01",
      "source_url": "https://cms9files.revize.com/oriontwp/Zoning%20Ordinance/section%2018%20Final.pdf",
      "sort_order": 1,
      "id": "79c9dcb17dcb383cacd2b3f5a3f86d851d6cb314c069dd5169da7179a15411b1",
      "frame_index": 3828,
      "category": "industrial",
      "pack_version": 1
    },
    {
      "municipality_slug": "orion-township",
      "district_code": "LI",
      "topic": "permitted_uses",
      "body_md": "Permitted by right in Limited Industrial (Section 16.01): manufacture, assembly, repair, processing, and packaging of electrical appliances and electronics, fabricated metal products and signs, material science products such as plastics and robotics, precision and scientific instruments, and semi-finished goods such as bakery products, cloth, glass, and plastics; building material sales; mini-storage and warehousing; printing plants; printing, copying, and shipping stores; tool, die, gauge, and machine shops; warehousing, wholesale, storage, and transfer facilities; offices related to the principal use; pet crematoriums (Section 16.02.I); and PUDs. Showrooms for retail tied to on-site fabrication, assembly, or wholesaling are a special use, with retail floor area capped at 30 percent (Section 16.01; Section 16.02.J).\n\nContractor storage yards, recreational vehicle storage yards, and outdoor storage are permitted or special depending on the Section 27.19 outdoor storage standards. Extended hours are by right when the principal use runs multiple shifts (Section 16.02.K). Uses must meet the industrial performance standards of Section 16.03.K on smoke, noise, vibration, and similar effects. Unlisted uses need a similar-use determination (Section 27.02.E).",
      "citation": "Section 16.01",
      "source_url": "https://cms9files.revize.com/oriontwp/Zoning%20Ordinance/section%2016%20Final.pdf",
      "sort_order": 1,
      "id": "b0bb98aa8263c566e4c72c02f64e86a6533df96866f341a6c55ab49277f54a7e",
      "frame_index": 3833,
      "category": "industrial",
      "pack_version": 1
    },
    {
      "municipality_slug": "orion-township",
      "district_code": "SP-1",
      "topic": "lot_size",
      "body_md": "A Special Purpose 1 development needs **10 acres** for the whole development, with at least **5,000 square feet** per structure (Article XXVI).",
      "citation": "Article XXVI",
      "source_url": "https://cms9files.revize.com/oriontwp/Zoning%20Ordinance/section%2026%20Final.pdf",
      "sort_order": 1,
      "id": "056458ab5c2763c5635288819efacacafc18af9a997ebd4282cc1203fdf567b6",
      "frame_index": 3917,
      "category": "mixed",
      "pack_version": 1
    },
    {
      "municipality_slug": "pembroke-pines-fl",
      "district_code": "R-1A",
      "topic": "height",
      "body_md": "Maximum **two stories or 35 feet**.",
      "citation": "LDC 155.421 Table 155.421.1",
      "source_url": "https://www.ppines.com/DocumentCenter/View/24616",
      "sort_order": 1,
      "id": "6a88c51149d53e3271710130641bd84e661af5106589f6af15ee280e1a4145fb",
      "frame_index": 3969,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "pembroke-pines-fl",
      "district_code": "R-1Z",
      "topic": "lot_coverage",
      "body_md": "Maximum lot coverage **45 percent**. Minimum floor area **1,300 square feet**.",
      "citation": "LDC 155.422 Table 155.422",
      "source_url": "https://www.ppines.com/DocumentCenter/View/24616",
      "sort_order": 1,
      "id": "12960373ed3cb3ac9fe43e8a43e4f4d8ebe4926c828aaf2a2a5f5e344bc8ea54",
      "frame_index": 3982,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "pembroke-pines-fl",
      "district_code": "R-2",
      "topic": "setbacks",
      "body_md": "Front: **25 feet** (30 feet non-residential). Side: **7.5 feet**, no setback needed along a common wall and lot line if built on two platted lots (20 feet non-residential, increasing one foot for every two feet of height over 20 feet). Rear: **15 feet** (25 feet non-residential). Street side: **15 feet**.",
      "citation": "LDC 155.424 Table 155.424",
      "source_url": "https://www.ppines.com/DocumentCenter/View/24616",
      "sort_order": 1,
      "id": "b5817e083048cdd9dbf4aca691baad27cc288d66d4dd86cd17e014b58b902ce0",
      "frame_index": 3984,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "pflugerville-tx",
      "district_code": "A",
      "topic": "lot_coverage",
      "body_md": "Table 4.2.4 A does not set a maximum lot coverage percentage for A (listed as N/A); development is instead controlled by the minimum lot area, width, and setback standards in the same table. Confirm the current adopted table and any overlay-specific impervious cover limit with the Planning Department before relying on this answer.",
      "citation": "UDC Table 4.2.4 A (Sec. 4.2.4), Table 4.2.4 C for height",
      "source_url": "https://online.encodeplus.com/regs/pflugerville/doc-viewer.aspx",
      "sort_order": 1,
      "id": "075b58d98f0974f0875ddc0beb8a3ed9afbf7b5095e779b34dd376db69a334f9",
      "frame_index": 4017,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "pflugerville-tx",
      "district_code": "GB1",
      "topic": "signs",
      "body_md": "Sign standards for GB1 are set by Chapter 154 (Signs) of the Pflugerville Code of Ordinances, and sign permits are processed under UDC Sec. 3.14. Exact values are review gated in this pack version; confirm the current table in the cited section, plus overlay status, PUD or development agreement conditions, utilities, and plat notes with the Planning Department before relying on this answer.",
      "citation": "Code of Ordinances Ch. 154 (Signs); UDC Sec. 3.14",
      "source_url": "https://ecode360.com/39359007",
      "sort_order": 1,
      "id": "d205e167ed647fad54d10e202c27eda76c9f9d50e0355a0dc00ad3651437f42e",
      "frame_index": 4045,
      "category": "commercial",
      "pack_version": 2
    },
    {
      "municipality_slug": "pflugerville-tx",
      "district_code": "GI",
      "topic": "height",
      "body_md": "Table 4.3.4 sets GI maximum building height at 100 ft. Buildings over 20 ft abutting single-family residential zoning require additional building setback (2 ft of setback per 1 ft of additional height for commercial/industrial, 5 ft of setback per 1 ft of additional height for multi-family/mixed use). Confirm overlay status and any PUD or development agreement with the Planning Department before relying on this answer.",
      "citation": "UDC Table 4.3.4 (Sec. 4.3.4)",
      "source_url": "https://online.encodeplus.com/regs/pflugerville/doc-viewer.aspx",
      "sort_order": 1,
      "id": "8875be6e76089efeed347fb4884d95503e18aef23393535a2fa9c2d34601fd10",
      "frame_index": 4054,
      "category": "industrial",
      "pack_version": 2
    },
    {
      "municipality_slug": "pflugerville-tx",
      "district_code": "MH",
      "topic": "lot_size",
      "body_md": "Table 4.2.4 B sets MH minimum lot area at 4,500 sq ft per dwelling unit (90,000 sq ft minimum site, 50 ac maximum site). Maximum density is 8 dwelling units/acre maximum. Confirm the current adopted table, overlay status, and any PUD or development agreement with the Planning Department before relying on this answer.",
      "citation": "UDC Table 4.2.4 B (Sec. 4.2.4), Table 4.2.4 C for height",
      "source_url": "https://online.encodeplus.com/regs/pflugerville/doc-viewer.aspx",
      "sort_order": 1,
      "id": "22394fb7c0ba7dd8265ff44de2d30bc5c142e9bb6bb72067f9225c958d3a1d0f",
      "frame_index": 4078,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "pflugerville-tx",
      "district_code": "NS",
      "topic": "setbacks",
      "body_md": "Table 4.3.4 sets NS minimum setbacks: front street 15 ft, interior side 10 ft (25 ft where abutting single-family residential zoning), rear 20 ft (20 ft where abutting single-family residential zoning). A streetscape yard requirement also applies per Table 4.3.4; confirm the current adopted table, overlay status, and any PUD or development agreement with the Planning Department before relying on this answer.",
      "citation": "UDC Table 4.3.4 (Sec. 4.3.4)",
      "source_url": "https://online.encodeplus.com/regs/pflugerville/doc-viewer.aspx",
      "sort_order": 1,
      "id": "bca998c52158eb4d8f95031ff26f988f1fbe767cc18375542a0017a3aa8e2e05",
      "frame_index": 4080,
      "category": "commercial",
      "pack_version": 2
    },
    {
      "municipality_slug": "pflugerville-tx",
      "district_code": "SF-E",
      "topic": "lot_size",
      "body_md": "Table 4.2.4 A sets SF-E minimum site area at 1/2 ac and minimum lot area at 1/2 ac; minimum lot width is 90 ft (measured at the front street setback; corner lots require 10 additional feet) and minimum lot depth is 140 ft. Confirm the current adopted table, overlay status, and any PUD or development agreement with the Planning Department before relying on this answer.",
      "citation": "UDC Table 4.2.4 A (Sec. 4.2.4), Table 4.2.4 C for height",
      "source_url": "https://online.encodeplus.com/regs/pflugerville/doc-viewer.aspx",
      "sort_order": 1,
      "id": "8e574422070a009b54745773c2849091e847f1e8b376cf5b9cca22ab5e735523",
      "frame_index": 4110,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "pilot-point-tx",
      "district_code": "*",
      "topic": "accessory_structures",
      "body_md": "Accessory structures and uses are governed by Sec. 14.02.107, which sets separate standards for residential and nonresidential districts and includes an accessory dwellings subsection. Current saved text says residential accessory structures must be subordinate, not rented, located toward the rear, and no taller than the primary structure; accessory dwellings must meet the Sec. 14.02.107(a)(2) conditions. Review-gated: the eCode360 New Laws ledger shows an adopted 2026-05-20 zoning amendment affecting Sec. 14.02.107 and swimming pools with ambiguous redlined setback figures, so this pack does not assert the affected garage, carport, or pool setback figures. Confirm the final adopted amendment text with Planning and Zoning before relying on those accessory-structure details.",
      "citation": "Sec. 14.02.107 Accessory structures and use regulations",
      "source_url": "https://ecode360.com/40503468",
      "sort_order": 1,
      "id": "3ba4197a771179b6511d6f193101eba6d039a509e3f27fca3448a074d7b5ed30",
      "frame_index": 4128,
      "category": "special",
      "pack_version": 2
    },
    {
      "municipality_slug": "pilot-point-tx",
      "district_code": "A",
      "topic": "lot_size",
      "body_md": "Minimum lot area 40,000 square feet; minimum lot width 100 feet; minimum lot depth 200 feet.",
      "citation": "Sec. 14.02.111 Schedule of District Regulations",
      "source_url": "https://ecode360.com/40503583",
      "sort_order": 1,
      "id": "08498a1db9f68a99f15c1f094d1739587288bb7f0e32869f6bd6e718fb0f3f78",
      "frame_index": 4136,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "port-st-lucie-fl",
      "district_code": "CS",
      "topic": "permitted_uses",
      "body_md": "Permitted by right (fully enclosed unless noted): any CG permitted use, vehicle repair, building material sales, cabinet/contractor shops, commercial laundry, sign company, public/semi-public facilities, trade shops, wholesale, food processing, manufacturing/assembly/warehousing, broadcasting, analytical labs, enclosed assembly areas of 3,000 sq. ft. or less, one incidental dwelling unit, and enclosed kennels. Principal uses that need not be enclosed (behind an 8-foot opaque fence/wall): public utility facilities, vehicle/farm equipment sales, lumber yards, storage yards, mobile home sales/storage, open storage, warehousing, equipment rental, and self-service storage (Sec. 158.227). Special exception: kennels with outdoor runs, larger enclosed assembly areas, wireless towers, commercial driving schools, RV parks, construction/demolition debris recycling, indoor shooting facilities, drive-through service, bars/lounges/night clubs, car washes, schools, automobile fuel service, convenience stores with fuel, secondary metals recyclers, medical marijuana dispensing, and pharmacies.",
      "citation": "Sec. 158.126(B), (C), (D)",
      "source_url": "https://library.municode.com/fl/port_st._lucie/codes/code_of_ordinances?nodeId=TITXVLAUS_CH158ZOCO_ARTVIIICODI_S158.126SECOZODICS",
      "sort_order": 1,
      "id": "531ee296ec1689148b820f9a54e7fb860bd1f19cffa59c90b02ce17774d2a8cb",
      "frame_index": 4198,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "port-st-lucie-fl",
      "district_code": "LMD",
      "topic": "lot_coverage",
      "body_md": "Maximum 40 percent building coverage; combined impervious surface capped at 80 percent.",
      "citation": "Sec. 158.155(G)",
      "source_url": "https://library.municode.com/fl/port_st._lucie/codes/code_of_ordinances?nodeId=TITXVLAUS_CH158ZOCO_ARTIX.5LIMIUSZODI_S158.155LIMIUSZODILM",
      "sort_order": 1,
      "id": "b22c7c670e692e3c960b3d45815e9419bc90f42886dae82daa5006038de73863",
      "frame_index": 4221,
      "category": "mixed",
      "pack_version": 1
    },
    {
      "municipality_slug": "port-st-lucie-fl",
      "district_code": "OSC",
      "topic": "setbacks",
      "body_md": "Established case by case for each use at site plan review.",
      "citation": "Sec. 158.101(H)",
      "source_url": "https://library.municode.com/fl/port_st._lucie/codes/code_of_ordinances?nodeId=TITXVLAUS_CH158ZOCO_ARTVIOPSPDI_S158.101OPSPCOZODIOS",
      "sort_order": 1,
      "id": "5df6a6ccb359f8853643cab864e0b8f139c84d3b8ac44cee3d59aa7355d2f599",
      "frame_index": 4229,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "port-st-lucie-fl",
      "district_code": "RM-8",
      "topic": "height",
      "body_md": "Maximum 35 feet, except in the ROI (Residential, Office and Institutional) conversion area between Airoso Boulevard and US Highway 1 per the City of Port St. Lucie Land Use Conversion Manual, where the maximum is one story.",
      "citation": "Sec. 158.078(G)",
      "source_url": "https://library.municode.com/fl/port_st._lucie/codes/code_of_ordinances?nodeId=TITXVLAUS_CH158ZOCO_ARTVREDI",
      "sort_order": 1,
      "id": "126e4653d6ea1421c057cd84a8e9f5832a9315a01c0abd9590e2f0a07c0a3911",
      "frame_index": 4270,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "port-st-lucie-fl",
      "district_code": "RS-1",
      "topic": "height",
      "body_md": "35 feet.",
      "citation": "Sec. 158.072(F)",
      "source_url": "https://library.municode.com/fl/port_st._lucie/codes/code_of_ordinances?nodeId=TITXVLAUS_CH158ZOCO_ARTVREDI",
      "sort_order": 1,
      "id": "74500cb9a68b629c168006df31395cc428a74a9e708f30f24da4aa5ba02eb8d8",
      "frame_index": 4280,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "port-st-lucie-fl",
      "district_code": "RS-3",
      "topic": "lot_coverage",
      "body_md": "Not stated as a separate maximum-building-coverage figure in the Sec. 158.076 text fetched this session; confirm with Planning and Zoning before relying on a coverage percentage for RS-3.",
      "citation": "Sec. 158.076",
      "source_url": "https://library.municode.com/fl/port_st._lucie/codes/code_of_ordinances?nodeId=TITXVLAUS_CH158ZOCO_ARTVREDI",
      "sort_order": 1,
      "id": "8eafdb674e415136127dde281942dd963d0598daeb3da2436474388c1d3cc136",
      "frame_index": 4291,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "princeton-tx",
      "district_code": "M-1",
      "topic": "lot_coverage",
      "body_md": "Maximum lot coverage **80 percent**.",
      "citation": "Sec. 82-23(d)",
      "source_url": "https://library.municode.com/tx/princeton/codes/code_of_ordinances?nodeId=COOR_CH82ZO_ARTIVNOZODI_S82-23M-1MAINDI-LI",
      "sort_order": 1,
      "id": "428c9704419f7076976b3bb8c21f30099bf29d894f2c148306dfd4f2c1efb6ae",
      "frame_index": 4332,
      "category": "industrial",
      "pack_version": 1
    },
    {
      "municipality_slug": "princeton-tx",
      "district_code": "NC",
      "topic": "height",
      "body_md": "Maximum height **40 feet** (cooling towers, roof gables, chimneys, vent stacks, or mechanical equipment rooms may project up to 12 feet above the maximum).",
      "citation": "Sec. 82-20(d)",
      "source_url": "https://library.municode.com/tx/princeton/codes/code_of_ordinances?nodeId=COOR_CH82ZO_ARTIVNOZODI_S82-20NECODI",
      "sort_order": 1,
      "id": "0a605734e30696612ea7867e116d9f2fbca6d10534743be6f87726a058b3e641",
      "frame_index": 4367,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "princeton-tx",
      "district_code": "SF-2",
      "topic": "parking",
      "body_md": "Minimum two covered, enclosed parking spaces per unit behind the front building line. General off-street parking standards are in Sec. 82-31.",
      "citation": "Sec. 82-12(d)",
      "source_url": "https://library.municode.com/tx/princeton/codes/code_of_ordinances?nodeId=COOR_CH82ZO_ARTIIIREZODI_S82-12-SMIREDI2",
      "sort_order": 1,
      "id": "fc6429f72e4066fabf886685156594511df96a786995bba4ce19f41f11bc924c",
      "frame_index": 4386,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "princeton-tx",
      "district_code": "SF-SE",
      "topic": "lot_coverage",
      "body_md": "Maximum lot coverage **35 percent**.",
      "citation": "Sec. 82-10(c)",
      "source_url": "https://library.municode.com/tx/princeton/codes/code_of_ordinances?nodeId=COOR_CH82ZO_ARTIIIREZODI_S82-10SIFAREESDI",
      "sort_order": 1,
      "id": "76eb65d7bc45e3f7eb90e1485b60f7b972ebbb5acf0ad33738d96f0f7bf8286f",
      "frame_index": 4396,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "princeton-tx",
      "district_code": "TF",
      "topic": "height",
      "body_md": "Maximum height **35 feet**.",
      "citation": "Sec. 82-13(c)",
      "source_url": "https://library.municode.com/tx/princeton/codes/code_of_ordinances?nodeId=COOR_CH82ZO_ARTIIIREZODI_S82-13TWFARE",
      "sort_order": 1,
      "id": "2eff9752ffa8141d29eb4a00ae60e4120f511746fdcc5c1a738562ca7e0c3a35",
      "frame_index": 4413,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "prosper-tx",
      "district_code": "*",
      "topic": "variance_process",
      "body_md": "The Board of Adjustment, a five-member board appointed by Town Council, hears variances of height, yard, area, exterior structure, lot coverage, and off-street parking requirements (UDC 1.02.C.4.d.iv). A concurring vote of 4 of the 5 members is required to grant a variance (UDC 1.02.C.4.e). The Board must find the variance is not contrary to the public interest, that literal enforcement would cause undue hardship, that the hardship is not self-created, and that special conditions of the specific parcel (restricted area, shape, topography, or physical features) are not shared by other parcels in the same district (UDC 1.02.C.4.d.iv to v). A variance cannot authorize a use not otherwise permitted in the district, and a Preliminary Site Plan, Site Plan, Preliminary Plat, or Final Plat process (where required) must be exhausted before a variance can be heard (UDC 1.02.C.4.d.v). Confirm the current zoning map and the cited UDC section text before acting.",
      "citation": "UDC 1.02.C",
      "source_url": "https://www.prospertx.gov/DocumentCenter/View/4917/Unified-Development-Code-PDF",
      "sort_order": 1,
      "id": "fd73b931a803e2baed6a0bb51bc12c0a198c6e6710c3b482037ad142eb364e6b",
      "frame_index": 4424,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "prosper-tx",
      "district_code": "SF-15",
      "topic": "lot_size",
      "body_md": "Minimum lot area **15,000 square feet**, minimum lot width **100 feet**, minimum lot depth **150 feet**. Minimum dwelling area **1,800 square feet**. Confirm the current zoning map, any Planned Development or Specific Use Permit conditions, and the cited UDC section text before acting.",
      "citation": "UDC 2.04.D.3.b",
      "source_url": "https://www.prospertx.gov/DocumentCenter/View/4917/Unified-Development-Code-PDF",
      "sort_order": 1,
      "id": "a83a8a527843d7d5a7c85e2d87cd5138fa51bbf5c40cc76e2d7fb0b5323ca009",
      "frame_index": 4461,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "prosper-tx",
      "district_code": "SUP",
      "topic": "permitted_uses",
      "body_md": "An SUP is a conditional approval for a specific use layered onto an existing base district (UDC 2.06.A), not a standalone zoning designation with its own dimensional chart. The zoning map shows the base district prefixed with an S to mark an SUP area (UDC 2.06.C.7). Conditions attached to the SUP, including site plan requirements, control for that use. Get the specific SUP ordinance and approved site plan for the property before relying on any general standard.",
      "citation": "UDC 2.06",
      "source_url": "https://www.prospertx.gov/DocumentCenter/View/4917/Unified-Development-Code-PDF",
      "sort_order": 1,
      "id": "1854b2ed72b3b0c654adccae4fe572417ee58a1682b0f5b3eecc3f808f913fb1",
      "frame_index": 4467,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "queen-creek-az",
      "district_code": "A-1",
      "topic": "height",
      "body_md": "Maximum height **30 feet**.",
      "citation": "Table 4.7-3",
      "source_url": "https://queencreek.municipalcodeonline.com/book?type=ordinances",
      "sort_order": 1,
      "id": "08dc3e8047d6aca6cfde4b21b703d244bd4a144bddf116da7862f48eba5fa46f",
      "frame_index": 4483,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "queen-creek-az",
      "district_code": "C-1",
      "topic": "lot_coverage",
      "body_md": "Maximum lot coverage **60 percent**.",
      "citation": "Table 4.7-3",
      "source_url": "https://queencreek.municipalcodeonline.com/book?type=ordinances",
      "sort_order": 1,
      "id": "5bf03238492d10c73f6b40c3fa3d9c40980ddbcfc0dade154952ebaa68c8f1e5",
      "frame_index": 4491,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "queen-creek-az",
      "district_code": "R1-12",
      "topic": "lot_coverage",
      "body_md": "Maximum lot coverage **35 percent**, plus up to 5 percent for a qualifying front porch (note 4).",
      "citation": "Table 4.7-3",
      "source_url": "https://queencreek.municipalcodeonline.com/book?type=ordinances",
      "sort_order": 1,
      "id": "f748dfdd6eeb5575780545b9999dac3a6cca4c0c5e64534d6d1f0fae8ba51c30",
      "frame_index": 4544,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "queen-creek-az",
      "district_code": "R1-15",
      "topic": "lot_size",
      "body_md": "Minimum lot area **15,000 square feet**, minimum width **100 feet**, minimum depth **130 feet**. Maximum net density 3.0 dwelling units per acre (Table 4.7-1).",
      "citation": "Table 4.7-3",
      "source_url": "https://queencreek.municipalcodeonline.com/book?type=ordinances",
      "sort_order": 1,
      "id": "de17dc29025b228da5da41dc8b1de923a482bc46b607a3d37fc30425ea1c84b4",
      "frame_index": 4555,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "queen-creek-az",
      "district_code": "R1-18",
      "topic": "lot_size",
      "body_md": "Minimum lot area **18,000 square feet**, minimum width **115 feet**, minimum depth **150 feet**. Maximum net density is set by the R1-15/R1-12 bracket in Table 4.7-1; confirm the exact net density figure against the ordinance chart for this specific code.",
      "citation": "Table 4.7-3",
      "source_url": "https://queencreek.municipalcodeonline.com/book?type=ordinances",
      "sort_order": 1,
      "id": "badbc5d37c83c3005713dbd5983a9a9a0b8011fd6f51a9342508c90a718c8332",
      "frame_index": 4560,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "queen-creek-az",
      "district_code": "R1-9",
      "topic": "permitted_uses",
      "body_md": "Single-family detached homes are permitted by right; multiple dwelling and duplex/triplex/townhouse uses are permitted with conditions (P) only in HDR/MDR, not R1-9 (Table 4.6-1). Confirm current use table entries for this code before acting.",
      "citation": "Table 4.6-1",
      "source_url": "https://queencreek.municipalcodeonline.com/book?type=ordinances",
      "sort_order": 1,
      "id": "a00806349a30f800263eb6d247e97a5e80d3174d5905defecffb2e2f60e19f40",
      "frame_index": 4596,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "queen-creek-az",
      "district_code": "R1-9",
      "topic": "height",
      "body_md": "Maximum height **30 feet**.",
      "citation": "Table 4.7-3",
      "source_url": "https://queencreek.municipalcodeonline.com/book?type=ordinances",
      "sort_order": 1,
      "id": "9cb4ffbcab1f8db304cf10aeafb10d1ea8cf8a399a6db0755f193544dcab57bf",
      "frame_index": 4598,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "queen-creek-az",
      "district_code": "RC",
      "topic": "lot_coverage",
      "body_md": "Maximum lot coverage **80 percent**.",
      "citation": "Table 4.7-3",
      "source_url": "https://queencreek.municipalcodeonline.com/book?type=ordinances",
      "sort_order": 1,
      "id": "db41817ed1de22e8ad29e697fed4857dad6ef6e9cbf8e0f73020990e7cc033bc",
      "frame_index": 4604,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "rochester",
      "district_code": "B-1",
      "topic": "permitted_uses",
      "body_md": "B-1 is the general business district. The district article should be used for the permitted and conditional use list, and the zoning map labels the district B-1. Confirm any site-specific use against Article 13 before relying on a business use.",
      "citation": "Article 13, Secs. 1300-1303",
      "source_url": "https://library.municode.com/mi/rochester/codes/zoning?nodeId=CIROZOOR_ART13GEBUDI",
      "sort_order": 1,
      "id": "a47a048d2e10b1f05f63b6ab37aa750dd7c7b8114ed2a3c056e8a60944e6d422",
      "frame_index": 4605,
      "category": "commercial",
      "pack_version": 5
    },
    {
      "municipality_slug": "rochester",
      "district_code": "CBD",
      "topic": "setbacks",
      "body_md": "Rear yard: stated value. The CBD schedule lists a **10-foot minimum rear yard**.",
      "citation": "Article 20, Sec. 2000 schedule, CBD rear-yard cell",
      "source_url": "https://library.municode.com/mi/rochester/codes/zoning?nodeId=CIROZOOR_ART20SEARBUHEPLRE_S2000SCDIRE",
      "sort_order": 3,
      "id": "f359b30658737b41bf7843c6a91e8bdd5ea2628d0b55b43c4c2efca76514c939",
      "frame_index": 4618,
      "category": "commercial",
      "pack_version": 5
    },
    {
      "municipality_slug": "rochester",
      "district_code": "I-2",
      "topic": "setbacks",
      "body_md": "The Article 20 schedule lists a **25 foot** front yard, **15 foot** least side yard, **40 foot** total side yards, and **20 foot** rear yard for I-2.",
      "citation": "Article 20, Sec. 2000 schedule",
      "source_url": "https://library.municode.com/mi/rochester/codes/zoning",
      "sort_order": 2,
      "id": "a58c2a6a0c39e4a77370daf268501e25ff2317f1d1b1f37b26e8e36cb7dd0353",
      "frame_index": 4640,
      "category": "industrial",
      "pack_version": 5
    },
    {
      "municipality_slug": "rochester",
      "district_code": "O-2",
      "topic": "permitted_uses",
      "body_md": "O-2 is the restricted office district. Use the district article for permitted, accessory, and special exception office uses (Section 1504 lists special exception uses approved by the Planning Commission on findings of location, compatibility, and impact), and check Section 2111 where upper-story apartments are proposed.",
      "citation": "Article 15, Secs. 1500-1504",
      "source_url": "https://library.municode.com/mi/rochester/codes/zoning?nodeId=CIROZOOR_ART15REOFDI",
      "sort_order": 1,
      "id": "7821022341150fa2b5e6b62f146626e571fbd1e9f189a973c8230d0af37960fa",
      "frame_index": 4663,
      "category": "commercial",
      "pack_version": 5
    },
    {
      "municipality_slug": "rochester",
      "district_code": "O-2",
      "topic": "variance_process",
      "body_md": "Variance and appeal requests go to the Zoning Board of Appeals. The city ZBA page says the board can grant variances in cases of practical difficulty or hardship where the variance is not contrary to the public interest. Confirm current filing requirements with the city before applying.",
      "citation": "Article 30; Zoning Board of Appeals page",
      "source_url": "https://www.rochestermi.org/99/Zoning-Board-of-Appeals",
      "sort_order": 1,
      "id": "4abe8e6ed96c7cf333e50045175a2b1de5b9e8c031f79fbd7867f25945471e89",
      "frame_index": 4671,
      "category": "commercial",
      "pack_version": 5
    },
    {
      "municipality_slug": "rochester",
      "district_code": "P-1",
      "topic": "lot_size",
      "body_md": "The Article 20 schedule does not contain a P-1 row, and Article 12 states no general numeric P-1 minimum lot area or width. Section 2007 separately applies where public water and sanitary sewer are unavailable.",
      "citation": "Article 12, Secs. 1200-1202; Article 20, Sec. 2000 schedule; Sec. 2007",
      "source_url": "https://library.municode.com/mi/rochester/codes/zoning",
      "sort_order": 2,
      "id": "2a94b1dd3810b2831c720974ad8128ebd3a9b420b0f2006276c02740bd58c1be",
      "frame_index": 4676,
      "category": "special",
      "pack_version": 5
    },
    {
      "municipality_slug": "rochester",
      "district_code": "POS",
      "topic": "setbacks",
      "body_md": "The Article 20 schedule does not contain a POS row, and the reviewed Article 19 Parks and Open Space provisions do not state one uniform numeric yard schedule. Setbacks depend on the allowed public, recreation, conservation, utility, or accessory use and its site review.",
      "citation": "Article 19, Secs. 1902-1905; Article 20, Sec. 2000 schedule",
      "source_url": "https://library.municode.com/mi/rochester/codes/zoning",
      "sort_order": 2,
      "id": "0bb48771095ea0ce9d2b993e899552a2aa9c39bed968eb4fee215ad746219ece",
      "frame_index": 4680,
      "category": "special",
      "pack_version": 5
    },
    {
      "municipality_slug": "rochester",
      "district_code": "R-1",
      "topic": "fences",
      "body_md": "A fence over **18 inches** needs a permit. Residential fences may be solid up to **6 feet** and chainlink up to **4 feet**, but a fence over 18 inches cannot be constructed nearer to the street than the front building line unless another rule allows it.",
      "citation": "Article 21, Sec. 2125",
      "source_url": "https://library.municode.com/mi/rochester/codes/zoning?nodeId=CIROZOOR_ART21SUDIRE",
      "sort_order": 1,
      "id": "3db733220cfa5dc84aa0019723086d577d0aff9ce432bca84f03a973ea06a4bb",
      "frame_index": 4693,
      "category": "residential",
      "pack_version": 5
    },
    {
      "municipality_slug": "rochester",
      "district_code": "R-1",
      "topic": "signs",
      "body_md": "Signs are regulated by Article 22 and the city sign-regulations page links back to that article. Check the sign type, district, illumination, area, height, and permit rules before installing or altering a sign.",
      "citation": "Article 22; city sign-regulations page",
      "source_url": "https://library.municode.com/mi/rochester/codes/zoning?nodeId=CIROZOOR_ART22SIRE",
      "sort_order": 1,
      "id": "bb74a98184d32a434edeec3f4e7816621b37059cf90f316751fc9228802d0b8c",
      "frame_index": 4694,
      "category": "residential",
      "pack_version": 5
    },
    {
      "municipality_slug": "rochester",
      "district_code": "R-3",
      "topic": "adu",
      "body_md": "The current ordinance text does not show a general accessory dwelling unit program. Section 2104 says a One-Family Residential District may not have more than one residential dwelling on a recorded lot, and Section 2102 says an accessory building may not be designed, built, modified, or used as a separate independent housekeeping or living unit. Treat a second dwelling as not allowed unless the city confirms another current ordinance provision applies.",
      "citation": "Article 21, Secs. 2102 and 2104",
      "source_url": "https://library.municode.com/mi/rochester/codes/zoning?nodeId=CIROZOOR_ART21SUDIRE",
      "sort_order": 1,
      "id": "2c38dd4684c6765f4a517553dc44e1759e79161480924a4f72bf8e2483f8b689",
      "frame_index": 4713,
      "category": "residential",
      "pack_version": 5
    },
    {
      "municipality_slug": "rochester",
      "district_code": "R-5",
      "topic": "signs",
      "body_md": "Signs are regulated by Article 22 and the city sign-regulations page links back to that article. Check the sign type, district, illumination, area, height, and permit rules before installing or altering a sign.",
      "citation": "Article 22; city sign-regulations page",
      "source_url": "https://library.municode.com/mi/rochester/codes/zoning?nodeId=CIROZOOR_ART22SIRE",
      "sort_order": 1,
      "id": "a8a718cc8d4fc7d4965036f96c785d252b16ba9254854841731b404c26be34d1",
      "frame_index": 4738,
      "category": "residential",
      "pack_version": 5
    },
    {
      "municipality_slug": "rochester-hills",
      "district_code": "*",
      "topic": "variance_process",
      "body_md": "Three different bodies decide three different things in Rochester Hills.\n\n- **Dimensional variances** (setbacks, height, lot coverage): the Zoning Board of Appeals, under the practical difficulty standard, by majority vote (§ 138-2.407). Check the City's posted meeting schedule and current agenda calendar for the next Zoning Board of Appeals meeting.\n- **Use variances**: the ZBA, under the stricter unnecessary hardship standard, by two-thirds vote. First you need a written determination that the use is not permitted and a final City Council denial of a rezoning (§ 138-2.408).\n- **Conditional uses**: the Planning Commission holds a public hearing and recommends; **City Council decides** with written findings (§ 138-2.301). A denial blocks resubmission for 365 days absent new evidence. The ZBA cannot hear appeals of these decisions (§ 138-2.301.F).\n- **Site plans**: single-family homes and accessory structures of 200 square feet or less need no site plan review. New non-residential and multiple-family construction goes to the Planning Commission (§ 138-2.200, § 138-2.202). Check the City's posted meeting schedule for the next Planning Commission meeting.\n\nAppeals of administrative decisions must be filed with the Planning and Development Department within **21 days** (§ 138-2.404).\n\nAdministrative site-plan appeals go to the Planning Commission (§ 138-2.200.B.2); the ZBA cannot hear City Council or Planning Commission site-plan/special-use appeals (§ 138-2.400.D.2). Conditional approval expires after 365 days unless the use is established OR the associated final site plan has been submitted for review; it also expires with expiration of its approved final site plan. A written request before expiration may obtain one Planning Commission extension of up to 180 days if the use meets current standards (§ 138-2.301.G).",
      "citation": "Article 2",
      "source_url": "https://library.municode.com/mi/rochester_hills/codes/code_of_ordinances?nodeId=SPBLADERE_CH138ZO",
      "sort_order": 1,
      "id": "e3c9b2683fec0b7a3c8f70455a07293af2c5f5de527e02350c60ef9c7b78d7e9",
      "frame_index": 4797,
      "category": "special",
      "pack_version": 2
    },
    {
      "municipality_slug": "rochester-hills",
      "district_code": "R-1",
      "topic": "permitted_uses",
      "body_md": "One-family detached homes are permitted by right. So are home occupations (§ 138-4.413), agriculture, raising and keeping of animals subject to § 138-4.430, accessory buildings and uses (Article 10), community facilities, roadside stands, and state licensed residential facilities for six or fewer residents (§ 138-4.435). Two-family dwellings, attached dwellings, retail, restaurants, and offices are not permitted.",
      "citation": "§ 138-4.300, Table 4; § 138-4.301.A",
      "source_url": "https://library.municode.com/mi/rochester_hills/codes/code_of_ordinances?nodeId=SPBLADERE_CH138ZO",
      "sort_order": 1,
      "id": "cb849667ca7e83fb30b95b8c1f09e3c6880c942246d35f8b2bf0dc7acbe1b6d7",
      "frame_index": 4843,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "rochester-hills",
      "district_code": "R-1",
      "topic": "lot_coverage",
      "body_md": "Buildings may cover at most **25 percent** of the lot. Accessory buildings count toward coverage (§ 138-13.101).",
      "citation": "§ 138-5.100, Table 6",
      "source_url": "https://library.municode.com/mi/rochester_hills/codes/code_of_ordinances?nodeId=SPBLADERE_CH138ZO",
      "sort_order": 1,
      "id": "5c2c90a4eed37a1cf976a94f93456a4b3157516209193b7a1f1744cf8d543d43",
      "frame_index": 4847,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "rochester-hills",
      "district_code": "R-2",
      "topic": "special_land_uses",
      "body_md": "Rochester Hills calls these conditional uses. City Council decides them after a Planning Commission public hearing (§ 138-2.301). Conditional uses in the one-family districts include places of worship (§ 138-4.427), schools, nursery schools and day care centers (§ 138-4.421), kennels (§ 138-4.419), public stables and riding academies (§ 138-4.434.B), cemeteries (five acre minimum), private recreation areas and swim clubs, state licensed residential facilities for 7 to 12 residents, and wireless telecommunication facilities (§ 138-4.440).\n\nA state-licensed family child-care home for six or fewer is a separate permitted residential-facility category under § 138-4.435; do not classify every home day care as a conditional center. Private stables accessory to a residence have a separate Planning Commission approval provision after hearing in § 138-4.434.A; confirm the City’s applicable review path where general conditional-use language overlaps.",
      "citation": "§ 138-4.300, Table 4; § 138-2.301; § 138-4.435; § 138-4.434.A",
      "source_url": "https://library.municode.com/mi/rochester_hills/codes/code_of_ordinances?nodeId=SPBLADERE_CH138ZO",
      "sort_order": 1,
      "id": "8f02b1d00aade7d6e5ad31dac72a44a53c5e02cb0ce7e8fa3f437463d27a20c8",
      "frame_index": 4850,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "rochester-hills",
      "district_code": "RE",
      "topic": "height",
      "body_md": "Maximum **2 stories and 35 feet**. Height measurement exceptions are listed in § 138-5.202.",
      "citation": "§ 138-5.100, Table 6",
      "source_url": "https://library.municode.com/mi/rochester_hills/codes/code_of_ordinances?nodeId=SPBLADERE_CH138ZO",
      "sort_order": 1,
      "id": "44f5ede31b86c542e62f45b7b7c187af215a1b91a7b41f60edf732ec580052c0",
      "frame_index": 4881,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "rochester-hills",
      "district_code": "RMH",
      "topic": "lot_coverage",
      "body_md": "No district-wide maximum building-coverage percentage is stated in Article 6 Chapter 4. Home-site area, building separation, streets and recreation constrain development. Parks with at least 50 sites require open space at least 2% of gross site area or 25,000 square feet, whichever is greater; perimeter buffers do not count. Do not infer a coverage percentage from that open-space requirement or import R-1 coverage from the height-only cross-reference.",
      "citation": "§§ 138-6.400–403",
      "source_url": "https://library.municode.com/mi/rochester_hills/codes/code_of_ordinances?nodeId=SPBLADERE_CH138ZO_ART6SUDIST",
      "sort_order": 1,
      "id": "4cb0daa6a7c429580ba3ec6ca8edf18a0d00053236d3db5f6444a53ec12064c5",
      "frame_index": 4892,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "rochester-hills",
      "district_code": "RMH",
      "topic": "lot_size",
      "body_md": "Manufactured-home sites must average at least 5,500 square feet per unit. The average may be reduced by up to 20%, with no individual site below 4,400 square feet, only when each square foot gained by reducing the average below 5,500 is replaced with additional dedicated open space beyond other required open space. This is not an unconditional 4,400-square-foot site allowance.",
      "citation": "§ 138-6.403.B",
      "source_url": "https://library.municode.com/mi/rochester_hills/codes/code_of_ordinances?nodeId=SPBLADERE_CH138ZO_ART6SUDIST",
      "sort_order": 1,
      "id": "7ab6cbc091caefa44fa6ef53632609c004c83082370a0a404e4b54292e21290c",
      "frame_index": 4893,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "rockwall-tx",
      "district_code": "AG",
      "topic": "height",
      "body_md": "Table 07.01 lists maximum building height for AG as 36 ft. Other citywide measurement rules, overlays, PD terms, and accessory-structure limits can be more specific.",
      "citation": "Article 05, Subsection 07.01 Residential District Development Standards",
      "source_url": "https://www.rockwall.com/pz/Planning/Documents/Unified%20Development%20Code%20(UDC).pdf",
      "sort_order": 1,
      "id": "529723227caf32169afd947a5bdb2394f4e821a1b17304ac3cbaa37964e1666f",
      "frame_index": 4913,
      "category": "special",
      "pack_version": 2
    },
    {
      "municipality_slug": "rockwall-tx",
      "district_code": "DT",
      "topic": "height",
      "body_md": "Downtown height is controlled by the Downtown District standards and any approved downtown development plan. This draft review-gates the exact height cell to the Section 04.07 snapshots and facts.md.",
      "citation": "Article 05, Subsection 04.07 Downtown District",
      "source_url": "https://www.rockwall.com/pz/Planning/Documents/Unified%20Development%20Code%20(UDC).pdf",
      "sort_order": 1,
      "id": "3b5ce53edeecef02a99558de28b814a253b0c5914d3af018df7f6f2923067aca",
      "frame_index": 4923,
      "category": "mixed",
      "pack_version": 2
    },
    {
      "municipality_slug": "rockwall-tx",
      "district_code": "NS",
      "topic": "lot_size",
      "body_md": "Table 07.03 lists NS minimum lot area as 6,000 sq ft, minimum width 60 ft, minimum depth 100 ft. Cell-checked against dim_table-138.png. The NS area figure coincidentally equals width times depth; it is the table's own explicit cell, cell-checked against the dim_table-138.png snapshot in the Stage 3 verification of 2026-07-05 and re-verified 2026-07-06.",
      "citation": "Article 05, Subsection 07.03 Non-Residential District Development Standards",
      "source_url": "https://www.rockwall.com/pz/Planning/Documents/Unified%20Development%20Code%20(UDC).pdf",
      "sort_order": 1,
      "id": "55c33c5f2c0e416ffe297093701be3aac98c6007a0aad7a745ccb2656b8ad6ca",
      "frame_index": 4960,
      "category": "commercial",
      "pack_version": 2
    },
    {
      "municipality_slug": "rockwall-tx",
      "district_code": "SF-10",
      "topic": "height",
      "body_md": "Table 07.01 lists maximum building height for SF-10 as 36 ft. Other citywide measurement rules, overlays, PD terms, and accessory-structure limits can be more specific.",
      "citation": "Article 05, Subsection 07.01 Residential District Development Standards",
      "source_url": "https://www.rockwall.com/pz/Planning/Documents/Unified%20Development%20Code%20(UDC).pdf",
      "sort_order": 1,
      "id": "be40e3fac126b46d87ab9a00a6ea5d19ed982aa3bf4c8aacc35ffeff0e7c3053",
      "frame_index": 4974,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "rockwall-tx",
      "district_code": "SFE-1.5",
      "topic": "setbacks",
      "body_md": "Table 07.01 lists SFE-1.5 minimum setbacks as front 50 ft, rear 10 ft, and side 25 ft. Street-side yards are treated as front yards under note 3 where applicable; review the table notes and any plat building lines before relying on a permit layout.",
      "citation": "Article 05, Subsection 07.01 Residential District Development Standards",
      "source_url": "https://www.rockwall.com/pz/Planning/Documents/Unified%20Development%20Code%20(UDC).pdf",
      "sort_order": 1,
      "id": "b84038dfdc490a45ade28777efc6024a2f0f330d55cea3e9d86ef4d09d2b7a9d",
      "frame_index": 4993,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "rockwall-tx",
      "district_code": "SFE-4.0",
      "topic": "lot_coverage",
      "body_md": "Table 07.01 lists maximum lot coverage for SFE-4.0 as 35%. Open space, drainage, landscape, and overlay standards can add separate constraints.",
      "citation": "Article 05, Subsection 07.01 Residential District Development Standards",
      "source_url": "https://www.rockwall.com/pz/Planning/Documents/Unified%20Development%20Code%20(UDC).pdf",
      "sort_order": 1,
      "id": "1952f450390118cbc15864d15ff4d1d6119bd370af5519d0f56a634024cdf3a6",
      "frame_index": 5005,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "rockwall-tx",
      "district_code": "SRO",
      "topic": "permitted_uses",
      "body_md": "Permitted, conditional, SUP, prohibited, and accessory uses are controlled by the Article 04 Land Use Schedule. This draft review-gates the exact cells for SRO; use_table-050.png through use_table-069.png must be checked before import. If the parcel is in an overlay or PD, the base district and adopted overlay or PD terms can change the answer.",
      "citation": "Article 04, Section 01 Land Use Schedule",
      "source_url": "https://www.rockwall.com/pz/Planning/Documents/Unified%20Development%20Code%20(UDC).pdf",
      "sort_order": 1,
      "id": "e440b6d8a7ff46a8dabd34a54d6fb9e35b70f3e541aca53912d7c913645edb33",
      "frame_index": 5012,
      "category": "special",
      "pack_version": 2
    },
    {
      "municipality_slug": "round-rock-tx",
      "district_code": "*",
      "topic": "variance_process",
      "body_md": "The zoning board of adjustment hears variances (Sec. 10-50). Approval requires a public hearing and a concurring vote of **75 percent** of ZBA members, with findings that include extraordinary conditions unique to the property and conditions not self-created. Financial hardship alone is not sufficient. Administrative adjustments (Sec. 10-51) and special exceptions (Sec. 10-53) are separate paths. Confirm the current zoning map, any overlay district, PUD or development agreement conditions, and the cited section text before acting.",
      "citation": "Sec. 10-50",
      "source_url": "https://library.municode.com/tx/round_rock/codes/code_of_ordinances?nodeId=PTIIIZODECO_CH10ZODEREPRBO_ARTVIIVAADADSPEX_S10-50VA",
      "sort_order": 1,
      "id": "761123f6303c366a3dd01e0c6db9544e822984e6cf0c0c0c4ab8a7a97b6e473c",
      "frame_index": 5027,
      "category": "special",
      "pack_version": 2
    },
    {
      "municipality_slug": "round-rock-tx",
      "district_code": "BP",
      "topic": "permitted_uses",
      "body_md": "Office, research and development, and light industrial uses with limited support services in a campus setting (Sec. 2-44). Retail sales and services are permitted with supplementary standards. The full use table is in Sec. 2-48.",
      "citation": "Sec. 2-48; Sec. 2-91",
      "source_url": "https://library.municode.com/tx/round_rock/codes/code_of_ordinances?nodeId=PTIIIZODECO_CH2ZODIUSRE_ARTIVEMINDI_S2-48PEUSEMINDI",
      "sort_order": 1,
      "id": "21c1bddeb22de06c9067c3bde73635cc5f57871534242c438d44f159f7cc501f",
      "frame_index": 5033,
      "category": "industrial",
      "pack_version": 2
    },
    {
      "municipality_slug": "round-rock-tx",
      "district_code": "MF-1",
      "topic": "lot_coverage",
      "body_md": "Maximum building lot coverage **40 percent**. Confirm the current zoning map, any overlay district, PUD or development agreement conditions, and the cited section text before acting.",
      "citation": "Sec. 2-26 chart",
      "source_url": "https://library.municode.com/tx/round_rock/codes/code_of_ordinances?nodeId=PTIIIZODECO_CH2ZODIUSRE_ARTIIREDI_S2-26RELOBUDIST",
      "sort_order": 1,
      "id": "2934f0f5278a68b1e8b2e02cb264fb08661613fc8984ffdea0df0589f7bbce9c",
      "frame_index": 5063,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "round-rock-tx",
      "district_code": "OS",
      "topic": "permitted_uses",
      "body_md": "Land kept primarily as open space (Sec. 2-59). Permitted uses are in the Sec. 2-60 use table. The Sec. 2-61 dimensional chart does not list an OS column; development standards come from Sec. 2-59 and applicable chapter 8 standards. Confirm the current zoning map, any overlay district, PUD or development agreement conditions, and the cited section text before acting.",
      "citation": "Sec. 2-59; Sec. 2-60",
      "source_url": "https://library.municode.com/tx/round_rock/codes/code_of_ordinances?nodeId=PTIIIZODECO_CH2ZODIUSRE_ARTVPUCIUSDI_S2-60PEUSPUCIUSDI",
      "sort_order": 1,
      "id": "8d9269e9e12c962b9a024c9a94dd32a858d0d9fe2915e18e3fc2bd97da72a65d",
      "frame_index": 5105,
      "category": "special",
      "pack_version": 2
    },
    {
      "municipality_slug": "round-rock-tx",
      "district_code": "PF-1",
      "topic": "permitted_uses",
      "body_md": "Public and civic uses per the Sec. 2-60 use table. See the district purpose in Secs. 2-56 through 2-58 for the intended intensity. Confirm the current zoning map, any overlay district, PUD or development agreement conditions, and the cited section text before acting.",
      "citation": "Sec. 2-60",
      "source_url": "https://library.municode.com/tx/round_rock/codes/code_of_ordinances?nodeId=PTIIIZODECO_CH2ZODIUSRE_ARTVPUCIUSDI_S2-60PEUSPUCIUSDI",
      "sort_order": 1,
      "id": "48a5c95c3f014c6a4cf4c3b8cf02f11637c5b920655cbd238098f3c70cbb28cb",
      "frame_index": 5106,
      "category": "special",
      "pack_version": 2
    },
    {
      "municipality_slug": "round-rock-tx",
      "district_code": "SF-R",
      "topic": "lot_size",
      "body_md": "Minimum lot area **2 acres**, minimum lot width **200 feet**. Confirm the current zoning map, any overlay district, PUD or development agreement conditions, and the cited section text before acting.",
      "citation": "Sec. 2-26 chart",
      "source_url": "https://library.municode.com/tx/round_rock/codes/code_of_ordinances?nodeId=PTIIIZODECO_CH2ZODIUSRE_ARTIIREDI_S2-26RELOBUDIST",
      "sort_order": 1,
      "id": "31ca651dbb8d5a8b14777e6efedb87ef2a17c6add08c9ab4e8647e158a142275",
      "frame_index": 5142,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "round-rock-tx",
      "district_code": "TF",
      "topic": "permitted_uses",
      "body_md": "Attached single-family (two-family) buildings are permitted, and detached single-family homes are permitted with supplementary standards (Sec. 2-25 use table, Sec. 2-91(hh)). The full use table is in Sec. 2-25.",
      "citation": "Sec. 2-25; Sec. 2-91",
      "source_url": "https://library.municode.com/tx/round_rock/codes/code_of_ordinances?nodeId=PTIIIZODECO_CH2ZODIUSRE_ARTIIREDI_S2-25PEUSREDI",
      "sort_order": 1,
      "id": "2881861e2b8d88aa64d27e262bc65f4f79d41d54c65229453bef6b59f7427ff9",
      "frame_index": 5148,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "round-rock-tx",
      "district_code": "TH",
      "topic": "permitted_uses",
      "body_md": "Townhouses are permitted on single lots (fee simple) or common lots (Sec. 2-25 use table). The full use table is in Sec. 2-25.",
      "citation": "Sec. 2-25; Sec. 2-91",
      "source_url": "https://library.municode.com/tx/round_rock/codes/code_of_ordinances?nodeId=PTIIIZODECO_CH2ZODIUSRE_ARTIIREDI_S2-25PEUSREDI",
      "sort_order": 1,
      "id": "0af2725faf1364bb81f4b02dd89f268d8d49fb83f096fc3d23be65342b429153",
      "frame_index": 5153,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "royal-oak",
      "district_code": "1F",
      "topic": "special_land_uses",
      "body_md": "Special land uses are decided by the Planning Commission at its discretion after a public hearing, with mailed notice to owners within 300 feet at least 15 days ahead (§ 770-11; § 770-13). In One-Family Residential they include churches (§ 770-74), group day-care homes and day-care centers in an existing church or school (§ 770-59), public-safety and utility buildings, bed and breakfasts (§ 770-78), senior accessory housing (§ 770-71), golf courses, cemeteries (§ 770-50), community centers (§ 770-51), and reuse of school buildings (§ 770-87).\n\nA few items go to the City Commission instead, after a Planning Commission recommendation: residential accessory parking lots (§ 770-73), alcohol plans of operation (§ 770-52B), marihuana establishments (§ 770-52.1), PUD rezonings (§ 770-98A), and rezonings and text amendments (Art. XII).\n\nUnless the Planning Commission specifies otherwise, the first building permit is required within one year; the Zoning Administrator may extend this for good cause. A denied application ordinarily cannot be resubmitted for one year, but sufficient new evidence or changed conditions may justify earlier reconsideration (§ 770-11D-E).",
      "citation": "§ 770-34C; § 770-11; § 770-13",
      "source_url": "https://ecode360.com/4478808",
      "sort_order": 1,
      "id": "141fdc884ca91ba7a1699651511c4017e042974434fce346629ab4db8690429b",
      "frame_index": 5166,
      "category": "residential",
      "pack_version": 3
    },
    {
      "municipality_slug": "royal-oak",
      "district_code": "1F",
      "topic": "setbacks",
      "body_md": "Front: greater of **25 feet** or adjacent-dwelling average, capped at **50 feet**. On a corner, the side-street yard is **10 feet** where the adjacent lot does not front that street (**8 feet** if frontage is under 50 feet); if the adjacent lot fronts that street, the interior-lot front setback applies.\n\nSide: lots at least **45 feet** wide at the building line require **5 feet** per side and **15 feet** combined if no attached accessory building is provided in the side yard. Below 45 feet: **4 feet** per side and **12 feet** combined if no attached accessory building is provided. The **8-foot** open side area suitable for a driveway applies to lots without accessory buildings in the side yard. Rear: **35 feet**.\n\nSection 770-21C(5): unroofed, unenclosed structures at grade have no setback; those six inches or more above grade and entirely in the rear yard require 3 feet from rear and side lines. In the side yard, principal-building setbacks apply. Unenclosed porches/steps may project up to 7 feet into the front setback and one story high. Listed architectural features may project up to 24 inches, but projections containing floor area must meet building setbacks.",
      "citation": "§ 770-34D(5)-(7); § 770-21C(5)",
      "source_url": "https://ecode360.com/4478808",
      "sort_order": 1,
      "id": "52702279ec8e0b27b40219e3fbc5561cb039013b375ee68c6afe56b8b1a20a66",
      "frame_index": 5167,
      "category": "residential",
      "pack_version": 3
    },
    {
      "municipality_slug": "royal-oak",
      "district_code": "1F",
      "topic": "lot_coverage",
      "body_md": "On lots under 6,000 square feet, buildings may cover at most **35 percent** of the lot, and the total ground floor area of all buildings is capped at **1,800 square feet**. On lots of 6,000 square feet or more, coverage is capped at **30 percent** (§ 770-34D(8)).\n\nSeparately, a house may not exceed **3,500 square feet** of usable floor area (§ 770-34D(9)). Accessory buildings count toward lot coverage (§ 770-22A(6)).",
      "citation": "§ 770-34D(8); § 770-34D(9)",
      "source_url": "https://ecode360.com/4478808",
      "sort_order": 1,
      "id": "abb4b2d976fac2ac4046eded916d11e78dba073ae3952714c1a54ac5f5f117f0",
      "frame_index": 5169,
      "category": "residential",
      "pack_version": 3
    },
    {
      "municipality_slug": "royal-oak",
      "district_code": "1FL",
      "topic": "special_land_uses",
      "body_md": "The district's special land uses are listed in § 770-35C. The Planning Commission decides special land uses at its discretion after a public hearing, with mailed notice to owners within 300 feet at least 15 days ahead (§ 770-11; § 770-13).\n\nSome items go to the City Commission instead, after a Planning Commission recommendation: residential accessory parking lots (§ 770-73), alcohol plans of operation (§ 770-52B), marihuana establishments (§ 770-52.1), PUD rezonings (§ 770-98A), and rezonings (Art. XII). Unless the Planning Commission specifies otherwise, the first building permit is required within one year; the Zoning Administrator may extend this for good cause. A denied application ordinarily cannot be resubmitted for one year, but sufficient new evidence or changed conditions may justify earlier reconsideration (§ 770-11D-E).",
      "citation": "§ 770-35C; § 770-11",
      "source_url": "https://ecode360.com/4478808",
      "sort_order": 1,
      "id": "588eee93b72326ef92557432df78cb22e439d2029f63032889bf432972681c56",
      "frame_index": 5172,
      "category": "residential",
      "pack_version": 3
    },
    {
      "municipality_slug": "royal-oak",
      "district_code": "2F",
      "topic": "height",
      "body_md": "Maximum **30 feet** (§ 770-36D).\n\nHeight is measured from the average finished grade at the front base of the building to the midpoint of a pitched roof or the roofline of a flat roof. Section 770-21D(3) separately permits specified proportional rooftop structures, with screening and setback conditions, no more than 15 feet above the district limit.",
      "citation": "§ 770-36D; § 770-21D",
      "source_url": "https://ecode360.com/4478808",
      "sort_order": 1,
      "id": "5624f0a49af6e7d1111ff3d4281608c0588bcfa041a55b52a2bb01e7e141ce19",
      "frame_index": 5180,
      "category": "residential",
      "pack_version": 3
    },
    {
      "municipality_slug": "royal-oak",
      "district_code": "GB",
      "topic": "setbacks",
      "body_md": "No setback is required except where property is adjacent to a residential zone; any setback that is provided must be at least **5 feet**. For residential adjacency, the front setback on the same side of the street and same block as residentially zoned property, with or without an alley, equals that required in the residential zone. Side/rear setbacks are **25 feet** without an intervening alley, or **25 feet from the alley centerline** where a public alley adjoins the side/rear lot line. The Planning Commission may establish greater or lesser setbacks through site-plan review under the stated criteria.",
      "citation": "§ 770-41D",
      "source_url": "https://ecode360.com/4478808",
      "sort_order": 1,
      "id": "5ee70a33c94ae600bc081a3a29e7f6406cc734f89339daf3c509b671159a842c",
      "frame_index": 5189,
      "category": "commercial",
      "pack_version": 3
    },
    {
      "municipality_slug": "royal-oak",
      "district_code": "GI",
      "topic": "height",
      "body_md": "Maximum **4 stories or 50 feet** (§ 770-44D).\n\nHeight is measured from the average finished grade at the front base of the building to the midpoint of a pitched roof or the roofline of a flat roof. Section 770-21D(3) separately permits specified proportional rooftop structures, with screening and setback conditions, no more than 15 feet above the district limit.",
      "citation": "§ 770-44D; § 770-21D",
      "source_url": "https://ecode360.com/4478808",
      "sort_order": 1,
      "id": "ab9645a009c0dea1a1aa146921e6ad33133f6b3edcc090f7ae6265621899eb1c",
      "frame_index": 5195,
      "category": "industrial",
      "pack_version": 3
    },
    {
      "municipality_slug": "royal-oak",
      "district_code": "SR",
      "topic": "setbacks",
      "body_md": "Section 770-48 and § 770-87 do not set a single district-wide numeric setbacks for every Special Redevelopment project. Residential density is determined by the Planning Commission under § 770-87D(1). Nonresidential proposals must meet the district's development design standards, with adequate separation/buffering, subject to justified deviations approved under § 770-87D(2). Applicable setbacks and other requirements may be modified through the specified approval findings. Use the approved project plan and conditions; the absence of a standalone number does not mean zero or unlimited development.",
      "citation": "§ 770-48; § 770-87D",
      "source_url": "https://ecode360.com/4478808",
      "sort_order": 1,
      "id": "3e5d76326914e3ac158c7a3a0f7f40c138ea61a5ac3333c600b5bf6f7b984343",
      "frame_index": 5239,
      "category": "special",
      "pack_version": 3
    },
    {
      "municipality_slug": "royse-city-tx",
      "district_code": "MF-1",
      "topic": "lot_size",
      "body_md": "The MF-1 area requirements table in § 4-5 does not set a minimum lot area, width, or depth. Density is controlled instead by a maximum of 18 dwelling units per acre. Confirmed against snapshot table-008-1.png.",
      "citation": "Exhibit 14A, § 4-5. - MF-1 - Multifamily Residential District.",
      "source_url": "https://library.municode.com/tx/royse_city/codes/code_of_ordinances?nodeId=EXHIBIT_14AZOOR_ART4ZODI",
      "sort_order": 1,
      "id": "af137d63c9f0d568b324a9f9e173c90fb8d75f46354a96d82b64991992e80265",
      "frame_index": 5285,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "royse-city-tx",
      "district_code": "MH",
      "topic": "height",
      "body_md": "MH maximum building height is 20 ft. Confirmed against snapshot table-007-1.png. Supplemental height rules in Article 6 can modify nonresidential structures and special cases.",
      "citation": "Exhibit 14A, § 4-4. - MH - Manufactured Home District.",
      "source_url": "https://library.municode.com/tx/royse_city/codes/code_of_ordinances?nodeId=EXHIBIT_14AZOOR_ART4ZODI",
      "sort_order": 1,
      "id": "2c888993c9e8b304752124df31afdbe2d256fbebfe18c0d45d0e5b74edfb43a9",
      "frame_index": 5293,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "san-marcos-tx",
      "district_code": "*",
      "topic": "home_occupation",
      "body_md": "Home occupations are a limited use in the conventional residential, neighborhood density, and CD-2 through CD-4 districts under the Land Use Matrix. Key standards in Sec. 5.1.3.4: no change to the residential character or exterior appearance, floor area capped at 20 percent of the dwelling plus accessory buildings and never more than 600 square feet, at most one non-household employee, one business vehicle of one ton capacity or less parked behind the front building line, outdoor activity hours 8 a.m. to 6 p.m. and indoor 8 a.m. to 10 p.m., no outside storage or display, one flush mounted sign up to two square feet, and no on premises retail except items made or assembled on site. The section lists allowed occupations (offices, instruction limited to two pupils, home crafts, registered family homes, single customer barber or beauty service) and prohibited ones (animal clinics, restaurants, vehicle repair, funeral homes, and similar). Legacy districts use the home occupation provisions in Chapter 9 Article 3. Confirm the current code text, any overlay or historic district, and any planned development or regulating plan conditions with the San Marcos Planning Division before relying on this cell.",
      "citation": "Sec. 5.1.3.4; Sec. 5.1.1.2 Table 5.1",
      "source_url": "https://user-3vpeqil.cld.bz/ORD-2025-01-Development-Code-Effective-January-25-2025",
      "sort_order": 1,
      "id": "574c5578b49c7f1fafd22673d9d7241641a506b901e28fe29e35424f011d0c4b",
      "frame_index": 5322,
      "category": "special",
      "pack_version": 2
    },
    {
      "municipality_slug": "san-marcos-tx",
      "district_code": "BP",
      "topic": "permitted_uses",
      "body_md": "Sec. 4.4.4.2 allows the General Commercial and Civic Building types. In the Land Use Matrix (Sec. 5.1.1.2 Table 5.1) retail sales, eating establishments, and indoor recreation are permitted (P) in BP, and bars and gasoline sales are conditional (C). The BP district was added by Ord. No. 2023-72. Confirm the current code text, any overlay or historic district, and any planned development or regulating plan conditions with the San Marcos Planning Division before relying on this cell.",
      "citation": "Sec. 4.4.4.2; Sec. 5.1.1.2 Table 5.1",
      "source_url": "https://user-3vpeqil.cld.bz/ORD-2025-01-Development-Code-Effective-January-25-2025",
      "sort_order": 1,
      "id": "c98519c3cb0ccdf66a214e04e794cddf31d2dbfd6ffdb7fb00f67329a23cc9bf",
      "frame_index": 5329,
      "category": "commercial",
      "pack_version": 2
    },
    {
      "municipality_slug": "san-marcos-tx",
      "district_code": "CD-5",
      "topic": "parking",
      "body_md": "Table 7.2 sets CD-5 minimums: residential 1 space per unit, lodging 1 per bedroom, office 2 per 1,000 square feet, retail 3 per 1,000 square feet, civic 1 per 5 assembly seats or 1 per 1,000 square feet of exhibition or recreation area. Properties with 5 or fewer units may be exempted by City Council conditional use permit. First layer parking is not allowed and garages are restricted (Sec. 4.4.3.6). Confirm the current code text, any overlay or historic district, and any planned development or regulating plan conditions with the San Marcos Planning Division before relying on this cell.",
      "citation": "Sec. 7.1.2.1 Table 7.2",
      "source_url": "https://user-3vpeqil.cld.bz/ORD-2025-01-Development-Code-Effective-January-25-2025",
      "sort_order": 1,
      "id": "08a61850cd2feabe205cb1b575f6544c54157c0050955ca330b99564f70b52db",
      "frame_index": 5367,
      "category": "mixed",
      "pack_version": 2
    },
    {
      "municipality_slug": "san-marcos-tx",
      "district_code": "CD-5D",
      "topic": "permitted_uses",
      "body_md": "Sec. 4.4.3.7 allows the Accessory Dwelling, Townhouse, Apartment, Live/Work, Mixed Use Shopfront, and Civic Building types. In the Land Use Matrix (Sec. 5.1.1.2 Table 5.1) retail sales, eating establishments, and hotels are permitted (P) in CD-5D; bars and alcohol sales for on premise consumption are conditional (C) uses. Confirm the current code text, any overlay or historic district, and any planned development or regulating plan conditions with the San Marcos Planning Division before relying on this cell.",
      "citation": "Sec. 4.4.3.7; Sec. 5.1.1.2 Table 5.1",
      "source_url": "https://user-3vpeqil.cld.bz/ORD-2025-01-Development-Code-Effective-January-25-2025",
      "sort_order": 1,
      "id": "abefdc496c3f48e617bd9b313c2d65560735cd0a5a674573b136acd384e1636d",
      "frame_index": 5368,
      "category": "mixed",
      "pack_version": 2
    },
    {
      "municipality_slug": "san-marcos-tx",
      "district_code": "CD-5D",
      "topic": "height",
      "body_md": "Sec. 4.4.3.7 sets a maximum height of 5 stories and 75 feet and a minimum of 2 stories and 24 feet, with alternative compliance available. Buildings located in the downtown historic district shall not exceed 3 stories. Confirm the current code text, any overlay or historic district, and any planned development or regulating plan conditions with the San Marcos Planning Division before relying on this cell.",
      "citation": "Sec. 4.4.3.7",
      "source_url": "https://user-3vpeqil.cld.bz/ORD-2025-01-Development-Code-Effective-January-25-2025",
      "sort_order": 1,
      "id": "680885e46bc18dffbb1dbab34a74c97ce9f068f6275503fc433fec16517023da",
      "frame_index": 5370,
      "category": "mixed",
      "pack_version": 2
    },
    {
      "municipality_slug": "san-marcos-tx",
      "district_code": "D",
      "topic": "setbacks",
      "body_md": "The Sec. 9.1.1.1 dimensional table sets these minimum setbacks for D: primary street 25 feet, interior side 5 feet, secondary street side 10 feet, rear 20 feet. Confirm the current code text, any overlay or historic district, and any planned development or regulating plan conditions with the San Marcos Planning Division before relying on this cell.",
      "citation": "Sec. 9.1.1.1; Sec. 9.2.1.4",
      "source_url": "https://user-3vpeqil.cld.bz/ORD-2025-01-Development-Code-Effective-January-25-2025",
      "sort_order": 1,
      "id": "bffe239d6715fbf072d2c57c817a24ebef81ce8d857781302a711dedf16f97d9",
      "frame_index": 5380,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "san-marcos-tx",
      "district_code": "HC",
      "topic": "setbacks",
      "body_md": "Sec. 4.4.4.3 principal building setbacks: primary street 20 feet minimum, secondary street 20 feet, side 5 feet, rear 20 feet. Accessory structure setbacks: primary street 20 feet, secondary street 20 feet, side 5 feet, rear 5 feet. Confirm the current code text, any overlay or historic district, and any planned development or regulating plan conditions with the San Marcos Planning Division before relying on this cell.",
      "citation": "Sec. 4.4.4.3",
      "source_url": "https://user-3vpeqil.cld.bz/ORD-2025-01-Development-Code-Effective-January-25-2025",
      "sort_order": 1,
      "id": "fad974ddc66c524a55685736ac23bd1d37eeefb13f9f2ed5004f19a3cd4d8904",
      "frame_index": 5400,
      "category": "commercial",
      "pack_version": 2
    },
    {
      "municipality_slug": "san-marcos-tx",
      "district_code": "LI",
      "topic": "permitted_uses",
      "body_md": "Sec. 4.4.4.4 allows the General Commercial and Civic Building types. In the Land Use Matrix (Sec. 5.1.1.2 Table 5.1) industrial and manufacturing uses are concentrated in the LI column along with building material sales and indoor recreation; general retail sales is not permitted in LI. Confirm the current code text, any overlay or historic district, and any planned development or regulating plan conditions with the San Marcos Planning Division before relying on this cell.",
      "citation": "Sec. 4.4.4.4; Sec. 5.1.1.2 Table 5.1",
      "source_url": "https://user-3vpeqil.cld.bz/ORD-2025-01-Development-Code-Effective-January-25-2025",
      "sort_order": 1,
      "id": "5ba60628bcebaa63b9bc9be9b41c1d688ed7429368f59380d2009a9ff40c2cee",
      "frame_index": 5409,
      "category": "industrial",
      "pack_version": 2
    },
    {
      "municipality_slug": "san-marcos-tx",
      "district_code": "MF-24",
      "topic": "permitted_uses",
      "body_md": "Authorized uses in MF-24 are the permitted and conditional uses in the MF-24 column of the legacy Land Use Matrix (Sec. 9.3.1.2 Table 9.1), plus accessory uses under Sec. 9.3.2.1. A use not listed in the matrix is not allowed in any legacy district (Sec. 9.3.1.1). Confirm the current code text, any overlay or historic district, and any planned development or regulating plan conditions with the San Marcos Planning Division before relying on this cell.",
      "citation": "Sec. 9.2.1.10; Sec. 9.3.1.2 Table 9.1",
      "source_url": "https://user-3vpeqil.cld.bz/ORD-2025-01-Development-Code-Effective-January-25-2025",
      "sort_order": 1,
      "id": "678b1e6b318377d9ab9c26877a3735ec272728cf5478bb26e69369abab747c29",
      "frame_index": 5424,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "san-marcos-tx",
      "district_code": "MU",
      "topic": "setbacks",
      "body_md": "The Sec. 9.1.1.1 dimensional table sets these minimum setbacks for MU: primary street 25 feet, interior side 7.5 feet, secondary street side 15 feet, rear 5 feet. Confirm the current code text, any overlay or historic district, and any planned development or regulating plan conditions with the San Marcos Planning Division before relying on this cell.",
      "citation": "Sec. 9.1.1.1; Sec. 9.2.2.1",
      "source_url": "https://user-3vpeqil.cld.bz/ORD-2025-01-Development-Code-Effective-January-25-2025",
      "sort_order": 1,
      "id": "c9e01966f043d8cc9b63b7d0c8d5521c797adaa8592ae50586960b4e53d6b188",
      "frame_index": 5440,
      "category": "mixed",
      "pack_version": 2
    },
    {
      "municipality_slug": "san-marcos-tx",
      "district_code": "MU",
      "topic": "lot_size",
      "body_md": "The Sec. 9.1.1.1 dimensional table sets 6,000 square feet minimum lot area, 20 acre maximum parcel size, 50 foot minimum frontage and width, 100 foot minimum depth, and 5.5 units per gross acre maximum for MU. Confirm the current code text, any overlay or historic district, and any planned development or regulating plan conditions with the San Marcos Planning Division before relying on this cell.",
      "citation": "Sec. 9.1.1.1; Sec. 9.2.2.1",
      "source_url": "https://user-3vpeqil.cld.bz/ORD-2025-01-Development-Code-Effective-January-25-2025",
      "sort_order": 1,
      "id": "c1d140f260a6c247f66a4407cfc795854a22a8a803b9ba9ceb70e2df53b4f47f",
      "frame_index": 5443,
      "category": "mixed",
      "pack_version": 2
    },
    {
      "municipality_slug": "san-marcos-tx",
      "district_code": "OP",
      "topic": "height",
      "body_md": "The Sec. 9.1.1.1 dimensional table sets the Sec. 9.1.1.1 table states no maximum stories for OP; where stories are stated in the table they may not exceed 14 feet floor to ceiling for OP. Confirm the current code text, any overlay or historic district, and any planned development or regulating plan conditions with the San Marcos Planning Division before relying on this cell.",
      "citation": "Sec. 9.1.1.1; Sec. 9.2.2.3",
      "source_url": "https://user-3vpeqil.cld.bz/ORD-2025-01-Development-Code-Effective-January-25-2025",
      "sort_order": 1,
      "id": "769a2e509299a5282643557ceba2ecc193946752c4d0dfa62057223b26841542",
      "frame_index": 5477,
      "category": "commercial",
      "pack_version": 2
    },
    {
      "municipality_slug": "san-marcos-tx",
      "district_code": "SF-4.5",
      "topic": "permitted_uses",
      "body_md": "Sec. 4.4.1.4 allows the Accessory Dwelling, House, and Civic building types. Specific land uses follow the SF-4.5 column of the Land Use Matrix in Sec. 5.1.1.2 Table 5.1. Occupancy restrictions in Sec. 5.1.4.1 apply. Confirm the current code text, any overlay or historic district, and any planned development or regulating plan conditions with the San Marcos Planning Division before relying on this cell.",
      "citation": "Sec. 4.4.1.4; Sec. 5.1.1.2 Table 5.1",
      "source_url": "https://user-3vpeqil.cld.bz/ORD-2025-01-Development-Code-Effective-January-25-2025",
      "sort_order": 1,
      "id": "6bb91ae45207fc9020647ca8eafd353d90ecffcd91cd0a0e7a5dd5ac67d7a77a",
      "frame_index": 5500,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "san-marcos-tx",
      "district_code": "SF-6",
      "topic": "lot_size",
      "body_md": "Sec. 4.4.1.3 building standards: House and Civic each require 6,000 square feet minimum lot area and 50 foot minimum lot width. Density is capped at 5.5 units per gross acre. Confirm the current code text, any overlay or historic district, and any planned development or regulating plan conditions with the San Marcos Planning Division before relying on this cell.",
      "citation": "Sec. 4.4.1.3",
      "source_url": "https://user-3vpeqil.cld.bz/ORD-2025-01-Development-Code-Effective-January-25-2025",
      "sort_order": 1,
      "id": "96179405489bff9a3ee0af35992287d57a45ec09d63522c450dc604fbce190cb",
      "frame_index": 5509,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "san-marcos-tx",
      "district_code": "SF-R",
      "topic": "lot_size",
      "body_md": "Sec. 4.4.1.2 building standards: House and Civic each require 43,560 square feet minimum lot area and 150 foot minimum lot width. Density is capped at 0.8 units per gross acre. Confirm the current code text, any overlay or historic district, and any planned development or regulating plan conditions with the San Marcos Planning Division before relying on this cell.",
      "citation": "Sec. 4.4.1.2",
      "source_url": "https://user-3vpeqil.cld.bz/ORD-2025-01-Development-Code-Effective-January-25-2025",
      "sort_order": 1,
      "id": "baf6643adcb8e879be1853a8836e74734f3095ef9c11ce22db3817e82bd459b1",
      "frame_index": 5514,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "shelby-township",
      "district_code": "*",
      "topic": "permitted_uses",
      "body_md": "Township-wide use rules worth knowing. Animals: no livestock or poultry on any lot except household pets; five or more dogs makes a kennel; horses need **3 acres** plus 1 more acre per additional horse (Section 4.60). Farms, permitted in the one-family districts, need at least 3 acres (Section 4.1). Beekeeping is allowed with hive placement rules: apiaries at least 10 feet from property lines, 20 feet from neighboring structures, and a 6 foot flyway barrier when hives sit within 16 feet of a lot line (Section 5.32.D).\n\nMarihuana: residents may grow for personal or registered-patient use inside the home on residentially zoned parcels in an enclosed locked facility, capped at **100 square feet** of the dwelling; caregiver cultivation is restricted to the L-M and H-M districts (Section 4.66.C, D). Commercially, the township allows **only marihuana grow businesses** by township permit in the industrial zoning district; retail marihuana establishments are prohibited (Code of Ordinances Sec. 14-652, Ord. No. 304, adopted March 4, 2025).",
      "citation": "Section 4.60; Section 4.66; Code of Ordinances Sec. 14-652",
      "source_url": "https://www.shelbytwp.org/home/showpublisheddocument/8014/638575124221170000",
      "sort_order": 97,
      "id": "a67cb76a0cc477287d8e53f7eac4e90cc89c46aad119d58a1e79a7bd4afe5384",
      "frame_index": 5525,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "shelby-township",
      "district_code": "*",
      "topic": "variance_process",
      "body_md": "The Zoning Board of Appeals hears appeals of administrative decisions, interprets the ordinance, and grants **dimensional variances** under a practical difficulties standard: the condition must be unique to the property, not self-created, and the variance must not bestow a special privilege (Section 7.16.E.7). Use variances are effectively unavailable; establishing a use otherwise prohibited cannot be allowed by variance, and no variance may be granted for a special land use or PUD once approved (Section 7.16.E). Fence matters may also be appealed to the ZBA under the Fence Ordinance (Code Sec. 10-315).\n\nProcess: apply to the Planning and Zoning Department with a site plan and letter of intent; if a site plan or sign approval needs a variance, the Planning Commission must consider it first. The ZBA hears the application at its next regular meeting or within **45 days**, decides by concurring **majority** vote, and communicates its decision in writing within one week (Section 7.16.C; Section 7.16.E.5, 6). Decisions may be appealed to Macomb County Circuit Court under Public Act 110 of 2006 (Section 7.16.D.1.c). The ZBA may also permit temporary structures for up to six months with extensions (Section 7.16.F).\n\nNonconforming uses are split into Class A (designated by the Planning Commission, which has sole designation authority; a Class A use may continue and even be restored) and Class B (may not be enlarged, moved, or restored after damage over 50 percent of replacement cost, and lapse after abandonment) (Section 7.15).",
      "citation": "Section 7.16.B; Section 7.16.C; Section 7.16.E; Section 7.15",
      "source_url": "https://www.shelbytwp.org/home/showpublisheddocument/8014/638575124221170000",
      "sort_order": 99,
      "id": "cfb1b4be0f8b8d1b9c42702fd585d37a942da3c7c9462c5025105df725cb0c9d",
      "frame_index": 5535,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "shelby-township",
      "district_code": "C-1",
      "topic": "setbacks",
      "body_md": "Rear: **24 feet**. Side: **20 feet** where not abutting a street or alley, **30 feet** abutting residential (Section 3.13.E).\n\nFront setbacks from the road centerline: buildings **105 feet** and parking 70 feet on arterials, 88/53 on collectors, 75/40 on local roads (Section 3.27.C). The parking setbacks apply to new development; modifications to existing sites instead require a 3 foot brick screen wall or Planning Commission-approved landscaping (Section 3.27.C, note 2).",
      "citation": "Section 3.13.E; Section 3.27.C",
      "source_url": "https://www.shelbytwp.org/home/showpublisheddocument/8014/638575124221170000",
      "sort_order": 20,
      "id": "c711fb10464f800b85b3ed029a247805445aa8a9a535120ceeec98f34237c100",
      "frame_index": 5538,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "shelby-township",
      "district_code": "C-3",
      "topic": "permitted_uses",
      "body_md": "C-3 permits planned shopping center uses: general merchandise and department stores, grocery stores and supermarkets, general retail, eating and drinking establishments including fast food and coffee shops with drive-through windows, motion picture theaters (not drive-ins), pet shops, photographic studios, art galleries, health and athletic clubs, hookah lounges with a license, amusement device centers, churches, professional offices, and uses permitted in the abutting R-1-A through R-2 districts (Section 3.15.B).",
      "citation": "Section 3.15.B",
      "source_url": "https://www.shelbytwp.org/home/showpublisheddocument/8014/638575124221170000",
      "sort_order": 22,
      "id": "328697727a44698718ee36e1fff572d6337a8497410a780483d52c09d09b780b",
      "frame_index": 5548,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "shelby-township",
      "district_code": "C-4",
      "topic": "lot_coverage",
      "body_md": "No fixed coverage percentage: maximum lot coverage in C-4 is governed by meeting all yard, landscaping, screening, parking, loading, and right-of-way requirements (Section 3.33.A.9).",
      "citation": "Section 3.33.A.9",
      "source_url": "https://www.shelbytwp.org/home/showpublisheddocument/8014/638575124221170000",
      "sort_order": 23,
      "id": "bdfafecd32ecfca8c85b7376417f445b05c6e12a325b3f661141876f2b864f97",
      "frame_index": 5558,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "shelby-township",
      "district_code": "O-2",
      "topic": "lot_coverage",
      "body_md": "No fixed coverage percentage: maximum lot coverage in O-2 is governed by meeting all yard, landscaping, screening, parking, loading, and right-of-way requirements (Section 3.33.A.9).",
      "citation": "Section 3.33.A.9",
      "source_url": "https://www.shelbytwp.org/home/showpublisheddocument/8014/638575124221170000",
      "sort_order": 19,
      "id": "ed29b4dfe3e28c388b251605d8de31ccdcc8577a355c46f2e2cd5f8b8432457f",
      "frame_index": 5603,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "shelby-township",
      "district_code": "R-1-C",
      "topic": "height",
      "body_md": "Maximum building height is **35 feet**, with at least **14 feet** between dwelling units (Section 3.5.D).",
      "citation": "Section 3.5.D",
      "source_url": "https://www.shelbytwp.org/home/showpublisheddocument/8014/638575124221170000",
      "sort_order": 4,
      "id": "9576de21b2c435199f73010c435e263d220467721064a1ea0aa69cd790cc1a3a",
      "frame_index": 5627,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "shelby-township",
      "district_code": "R-2",
      "topic": "height",
      "body_md": "Maximum building height is **2 stories, not to exceed 35 feet** (Section 3.6.D).",
      "citation": "Section 3.6.D",
      "source_url": "https://www.shelbytwp.org/home/showpublisheddocument/8014/638575124221170000",
      "sort_order": 5,
      "id": "197ccae1eb06ad6df48b61dc052ca97744c9edb21ab2152f34e0ae7d7eb02d6c",
      "frame_index": 5636,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "shelby-township",
      "district_code": "R-4",
      "topic": "lot_size",
      "body_md": "R-4 uses the shared R-3 to R-7 standards: **24,000 square foot** minimum lot, **100 feet** of frontage, 50 foot perimeter side and rear setbacks, 2 stories and 35 feet maximum, with a density cap of **4 dwelling units per acre** (Section 3.7.D). See the R-3 pages for the full group standards.",
      "citation": "Section 3.7.D",
      "source_url": "https://www.shelbytwp.org/home/showpublisheddocument/8014/638575124221170000",
      "sort_order": 7,
      "id": "b83d51fea2f8a3ba647803fc6c58d376c0a8b714bc775a09dd95c153f9526ae2",
      "frame_index": 5644,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "smyrna-tn",
      "district_code": "*",
      "topic": "signs",
      "body_md": "Signs are regulated by the separate Town of Smyrna Sign Ordinance, updated April 2026. For non-residential uses in residential districts, a ground sign may not exceed 4 ft in height and 48 sq ft (up to 7 ft when integrated into a landscaped architectural feature), wall signs are limited to 32 sq ft, and ground signs need a 10 ft setback from the right-of-way. Non-residential districts follow Chapter 6, temporary signs follow Chapter 7, and planned developments follow Chapter 5. Sign permits are issued under Chapter 9. Overlays, planned-development approvals, recorded conditions, and Article VI exceptions can change the parcel-specific result; confirm with Smyrna Planning and Zoning before relying on this answer.",
      "citation": "Town of Smyrna Sign Ordinance (April 2026)",
      "source_url": "https://www.townofsmyrna.org/Documents/Departments/Planning%20Zoning/April%202026%20Sign%20Ordinance.pdf",
      "sort_order": 1,
      "id": "bc60cba7bd4808a6edd8b9c4ca7b01cb1d7386b2bb88ae5ab9e5299f4cc498bb",
      "frame_index": 5662,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "smyrna-tn",
      "district_code": "*",
      "topic": "variance_process",
      "body_md": "The five-member Board of Zoning Appeals hears administrative appeals, special exceptions, and variances. A variance application follows denial of a permit, and the Board must find a particular physical hardship (not mere inconvenience), conditions not general to the district, no self-created hardship, and no special privilege; financial return alone is never a basis. A variance cannot authorize activities in a district that the ordinance does not permit, so use changes need rezoning or a special exception instead. Overlays, planned-development approvals, recorded conditions, and Article VI exceptions can change the parcel-specific result; confirm with Smyrna Planning and Zoning before relying on this answer.",
      "citation": "Sections 7.070 and 7.080",
      "source_url": "https://www.townofsmyrna.org/Documents/Departments/Planning%20Zoning/June%202026%20MZO%20Update.pdf",
      "sort_order": 1,
      "id": "b212dab7115df6372c58191880f50c67256e7c5ce66d7d2e730e8e026e523d81",
      "frame_index": 5664,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "smyrna-tn",
      "district_code": "A-1",
      "topic": "setbacks",
      "body_md": "A-1 yard standards: front 50 ft measured from the edge of the public road right-of-way, side 25 ft, rear 25 ft. Overlays, planned-development approvals, recorded conditions, and Article VI exceptions can change the parcel-specific result; confirm with Smyrna Planning and Zoning before relying on this answer.",
      "citation": "Section 5.055.E.2",
      "source_url": "https://www.townofsmyrna.org/Documents/Departments/Planning%20Zoning/June%202026%20MZO%20Update.pdf",
      "sort_order": 1,
      "id": "6964f98fd88ba34c34c99e567aff10160e64637916a59449191c6a0ccbe5f4d2",
      "frame_index": 5666,
      "category": "mixed",
      "pack_version": 1
    },
    {
      "municipality_slug": "smyrna-tn",
      "district_code": "C-3",
      "topic": "height",
      "body_md": "C-3 maximum building height: 40 ft, except as provided in Article VI Section 6.050. F.A.A. glide path height restrictions can never be exceeded. Overlays, planned-development approvals, recorded conditions, and Article VI exceptions can change the parcel-specific result; confirm with Smyrna Planning and Zoning before relying on this answer.",
      "citation": "Section 5.052.3.E.4",
      "source_url": "https://www.townofsmyrna.org/Documents/Departments/Planning%20Zoning/June%202026%20MZO%20Update.pdf",
      "sort_order": 1,
      "id": "04acbf475685ea45c13a1b1f20e1e74794bf4d11d93d655ff8014687010159b5",
      "frame_index": 5682,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "smyrna-tn",
      "district_code": "H-1",
      "topic": "permitted_uses",
      "body_md": "H-1 is an overlay: permitted uses, special exceptions, and all dimensional regulations follow the underlying zoning district. The overlay adds Historic Zoning Commission review of changes to protect the district's historic character. Overlays, planned-development approvals, recorded conditions, and Article VI exceptions can change the parcel-specific result; confirm with Smyrna Planning and Zoning before relying on this answer.",
      "citation": "Section 5.056",
      "source_url": "https://www.townofsmyrna.org/Documents/Departments/Planning%20Zoning/June%202026%20MZO%20Update.pdf",
      "sort_order": 1,
      "id": "f1e8b21d56bcfaa8abcbd13faa3b79524fe221f6a421f1c788aadbad16262edf",
      "frame_index": 5697,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "smyrna-tn",
      "district_code": "P-O-2",
      "topic": "lot_size",
      "body_md": "P-O-2 minimum lot size: 10,000 sq ft. Overlays, planned-development approvals, recorded conditions, and Article VI exceptions can change the parcel-specific result; confirm with Smyrna Planning and Zoning before relying on this answer.",
      "citation": "Section 5.052.6.E.1",
      "source_url": "https://www.townofsmyrna.org/Documents/Departments/Planning%20Zoning/June%202026%20MZO%20Update.pdf",
      "sort_order": 1,
      "id": "e39879b6bf7ccf8b9a75f14e8f1e3a3d4e857d31ec1a6f5ed74e9c1eb967c0c8",
      "frame_index": 5724,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "smyrna-tn",
      "district_code": "PUD",
      "topic": "setbacks",
      "body_md": "PUD dimensional standards: Under Section 4.073 no minimum lot size or yards are required within a planned development, but developments of 25 or more single-family dwellings must use three lot-size tiers (7,000, 9,000, and 11,000 sq ft minimums at maximum 40 percent, maximum 30 percent, and minimum 30 percent of lots), and lots abutting Town R-1 or county RM property must be at least 11,000 sq ft with a 20 ft landscape buffer. Use the approved plan for parcel-specific standards. Overlays, planned-development approvals, recorded conditions, and Article VI exceptions can change the parcel-specific result; confirm with Smyrna Planning and Zoning before relying on this answer.",
      "citation": "Sections 4.073-4.074",
      "source_url": "https://www.townofsmyrna.org/Documents/Departments/Planning%20Zoning/June%202026%20MZO%20Update.pdf",
      "sort_order": 1,
      "id": "120ffef9aa1358326667a0152279ce35a77db5f1c64cc3e22c5e39d05499461b",
      "frame_index": 5732,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "smyrna-tn",
      "district_code": "R-3",
      "topic": "permitted_uses",
      "body_md": "R-3 permits single-family dwellings, prefabricated dwellings, customary accessory buildings in the side or rear yard at least 5 ft from any lot line, home occupations, and essential public transport, communication, and utility services. Boarding or rooming houses, educational and religious facilities, cultural and recreation services, government administrative services, associations for physically or mentally handicapped persons, family and group care facilities, nursing homes, retirement or rest homes, orphanages, family day care homes, towers and water or sewage facilities, bed and breakfasts, and accessory apartments need special exception approval under Section 7.060. Mobile home parks are prohibited. Overlays, planned-development approvals, recorded conditions, and Article VI exceptions can change the parcel-specific result; confirm with Smyrna Planning and Zoning before relying on this answer.",
      "citation": "Section 5.051.3.B-D",
      "source_url": "https://www.townofsmyrna.org/Documents/Departments/Planning%20Zoning/June%202026%20MZO%20Update.pdf",
      "sort_order": 1,
      "id": "650d870c31d7d120f0a9da8e6c264873ec8fe6bce37048923c841c8c5ca3fbf2",
      "frame_index": 5743,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "smyrna-tn",
      "district_code": "R-5",
      "topic": "setbacks",
      "body_md": "R-5 yard standards for a mobile home on a single lot: front 35 ft, side 10 ft, rear 20 ft. Mobile home parks use park-level setbacks (front 30 ft, side 15 ft, rear 10 ft, larger where noted) with 20 to 30 ft separations between units under Sections 5.051.5.E.2 and 4.090; the ordinance table marks conditions with asterisks, so read the exact row before siting a unit. Overlays, planned-development approvals, recorded conditions, and Article VI exceptions can change the parcel-specific result; confirm with Smyrna Planning and Zoning before relying on this answer. (Flag 2026-07-03: the mobile home park setback table prints out of alignment in the June 2026 PDF; the single-lot values are clear, but have Planning confirm park-level setbacks and the asterisked conditions.)",
      "citation": "Section 5.051.5.E.2",
      "source_url": "https://www.townofsmyrna.org/Documents/Departments/Planning%20Zoning/June%202026%20MZO%20Update.pdf",
      "sort_order": 1,
      "id": "a2d2a0e1d225f24838f28c0bc12e25069d541e60794e61dd9ec1845f00af0f52",
      "frame_index": 5754,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "smyrna-tn",
      "district_code": "R-5",
      "topic": "lot_coverage",
      "body_md": "R-5 maximum lot coverage for a mobile home on a single lot: 40 percent of the lot area including accessory structures. Mobile home parks follow the standards in Section 4.090. Overlays, planned-development approvals, recorded conditions, and Article VI exceptions can change the parcel-specific result; confirm with Smyrna Planning and Zoning before relying on this answer.",
      "citation": "Section 5.051.5.E.3",
      "source_url": "https://www.townofsmyrna.org/Documents/Departments/Planning%20Zoning/June%202026%20MZO%20Update.pdf",
      "sort_order": 1,
      "id": "b17e6be12f4728e987fda4b0da70bb4ac035be2f2709deaf1a395342b64a8c6e",
      "frame_index": 5756,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "southfield",
      "district_code": "B-1",
      "topic": "setbacks",
      "body_md": "Area and bulk standards for B-1 are in the nonresidential schedule and its footnotes. Because many entries use footnotes tied to building height, adjacent residential zoning, or site plan review, confirm exact setbacks from Article 22 before designing (Article 22, Sections 5.194 and 5.195).",
      "citation": "Article 22, Sections 5.194 and 5.195",
      "source_url": "https://www.cityofsouthfield.com/sites/default/files/2026-02/ZONING%20ORDINANCE.pdf",
      "sort_order": 1,
      "id": "579c41193eaa40c469815c76230fbbe385f87f79036797f01e97d6f907e4e008",
      "frame_index": 5774,
      "category": "commercial",
      "pack_version": 2
    },
    {
      "municipality_slug": "southfield",
      "district_code": "R-1",
      "topic": "lot_size",
      "body_md": "The schedule lists **9,000 square feet** as the minimum lot area and **70 feet** as the minimum lot width for R-1. Minimum floor area is **1,000 square feet** (Article 22, Section 5.193).",
      "citation": "Article 22, Section 5.193",
      "source_url": "https://www.cityofsouthfield.com/sites/default/files/2026-02/ZONING%20ORDINANCE.pdf",
      "sort_order": 1,
      "id": "acbc0c222fa91c4ea2cb857c5f43c3f77e2db968a8ced530daf0b8525e400e08",
      "frame_index": 5794,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "southfield",
      "district_code": "R-E",
      "topic": "lot_coverage",
      "body_md": "One-family dwellings and accessory buildings together may cover up to **30 percent** of the lot in R-E. Section 5.66 sends the area and coverage limit to the Article 22 schedule.",
      "citation": "Section 5.66; Article 22, Section 5.193",
      "source_url": "https://www.cityofsouthfield.com/sites/default/files/2026-02/ZONING%20ORDINANCE.pdf",
      "sort_order": 1,
      "id": "f1f7b33fbac1de2ae9990eff48c7e9f613d835ea7732474a7865dc4f4e915fd6",
      "frame_index": 5815,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "southfield",
      "district_code": "R-E",
      "topic": "lot_size",
      "body_md": "The schedule lists **20,000 square feet** as the minimum lot area and **90 feet** as the minimum lot width for R-E. Minimum floor area is **1,400 square feet** (Article 22, Section 5.193).",
      "citation": "Article 22, Section 5.193",
      "source_url": "https://www.cityofsouthfield.com/sites/default/files/2026-02/ZONING%20ORDINANCE.pdf",
      "sort_order": 1,
      "id": "8ea4a4c34848c917df237d364bc9563fbf1cfafff76762b380295daa5f2e065b",
      "frame_index": 5816,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "southfield",
      "district_code": "RC",
      "topic": "setbacks",
      "body_md": "Area and bulk standards for RC are in the nonresidential schedule and its footnotes. Because many entries use footnotes tied to building height, adjacent residential zoning, or site plan review, confirm exact setbacks from Article 22 before designing (Article 22, Sections 5.194 and 5.195).",
      "citation": "Article 22, Sections 5.194 and 5.195",
      "source_url": "https://www.cityofsouthfield.com/sites/default/files/2026-02/ZONING%20ORDINANCE.pdf",
      "sort_order": 1,
      "id": "1b8ffe29130f8c674621a18d5f165cf4a3a31a8c5c914e6b6fb3a774f44883f1",
      "frame_index": 5819,
      "category": "mixed",
      "pack_version": 2
    },
    {
      "municipality_slug": "southfield",
      "district_code": "RM",
      "topic": "permitted_uses",
      "body_md": "RM is the low-rise multiple family residential district. Article 7 requires site plan review for RM development, permits single-family uses, two-family dwellings, and multiple-family dwellings not over **2 stories**, and sets bedroom-based land-area ratios for multiple-family dwellings. The Article 22 schedule lists a **2 acre** development area and a **30 foot / 2 story** height line.",
      "citation": "Sections 5.81-5.86; Article 22, Section 5.193",
      "source_url": "https://www.cityofsouthfield.com/sites/default/files/2026-02/ZONING%20ORDINANCE.pdf",
      "sort_order": 1,
      "id": "576e5dbd947e7957c342362cd26f717dd624ab2272980d15fdf6611b3466424e",
      "frame_index": 5820,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "spring-hill-tn",
      "district_code": "C-2",
      "topic": "setbacks",
      "body_md": "Minimum lot area 10,000 square feet; no minimum lot width; maximum gross floor area 5,000 square feet unless the Section 5.3.B site-plan-review standards are met; maximum height 30 feet; maximum impervious surface 80%; no front setback; interior side setback 5 feet unless abutting a residential district, then 10 feet; corner side setback 10 feet; rear setback 15 feet unless abutting a residential district, then 25 feet.",
      "citation": "UDC Table 5-1",
      "source_url": "https://www.springhilltn.org/DocumentCenter/View/10522/Unified-Development-Code--Revised-December-2025",
      "sort_order": 61,
      "id": "e0332a544c4ac0d6d6ffcc60c4d2cf0b3f109a416bf5ab65779be1318480cd37",
      "frame_index": 5844,
      "category": "commercial",
      "pack_version": 2
    },
    {
      "municipality_slug": "spring-hill-tn",
      "district_code": "C-D-E1",
      "topic": "permitted_uses",
      "body_md": "The C-D downtown sub-districts are mixed-use districts. The C-D-C sub-district is for compact walkable mixed use, while C-D-E1 and C-D-E2 transition toward lower-intensity edges. Table 8-1 lists downtown uses such as art galleries, arts studios, bars, dwellings above the ground floor, restaurants, retail, office, personal services, and civic uses, subject to sub-district and design standards.",
      "citation": "UDC Table 8-1 and Sec. 5.1",
      "source_url": "https://www.springhilltn.org/DocumentCenter/View/10522/Unified-Development-Code--Revised-December-2025",
      "sort_order": 90,
      "id": "2f868355324f338a2355e2e8d4fbd278746dda67a103d3b05d9b8a30ba8e2797",
      "frame_index": 5868,
      "category": "mixed",
      "pack_version": 2
    },
    {
      "municipality_slug": "spring-hill-tn",
      "district_code": "C-D-E2",
      "topic": "height",
      "body_md": "No minimum lot area or width; maximum height 40 feet; minimum height 14 feet; maximum impervious surface 90%; front and corner side build-to zones are 0 to 10 feet; side and rear setbacks apply when abutting residential districts.",
      "citation": "UDC Table 5-3",
      "source_url": "https://www.springhilltn.org/DocumentCenter/View/10522/Unified-Development-Code--Revised-December-2025",
      "sort_order": 92,
      "id": "b36f6cf5e536553a885c9c355c72fa12f4371007cd4194cb130ca8cdd1adb9fe",
      "frame_index": 5875,
      "category": "mixed",
      "pack_version": 2
    },
    {
      "municipality_slug": "spring-hill-tn",
      "district_code": "F-1",
      "topic": "permitted_uses",
      "body_md": "This is an overlay or special-purpose district. Do not rely on the overlay code alone as a complete answer for what can be built; confirm the underlying base district and any overlay-specific standards.",
      "citation": "UDC Article 7",
      "source_url": "https://www.springhilltn.org/DocumentCenter/View/10522/Unified-Development-Code--Revised-December-2025",
      "sort_order": 125,
      "id": "db431bc634bf712697426564eea4f0be1a45a680432d058ffcb1b7deba0512cd",
      "frame_index": 5887,
      "category": "special",
      "pack_version": 2
    },
    {
      "municipality_slug": "spring-hill-tn",
      "district_code": "I-2",
      "topic": "permitted_uses",
      "body_md": "Table 8-1 lists industrial, warehousing, wholesale, research and development, office, vehicle operation, contractor yard, and related uses across I-1, I-2, and RD. General industrial uses are concentrated in I-2, while RD is oriented to research, development, technology, medical, office, and ancillary campus services.",
      "citation": "UDC Table 8-1 and Sec. 6.1",
      "source_url": "https://www.springhilltn.org/DocumentCenter/View/10522/Unified-Development-Code--Revised-December-2025",
      "sort_order": 105,
      "id": "655eea5d5795e3b0d1617c8cb7298d8acf5958bf40c31f6e69a98220089cf28a",
      "frame_index": 5894,
      "category": "industrial",
      "pack_version": 2
    },
    {
      "municipality_slug": "spring-hill-tn",
      "district_code": "R-4",
      "topic": "height",
      "body_md": "Minimum lot area 6,000 square feet; minimum lot width 50 feet; maximum height 40 feet; maximum building coverage 35%; front build-to zone 20 to 25 feet; interior side setback 5 feet; corner side setback 10 feet; rear setback 25 feet.",
      "citation": "UDC Table 4-1",
      "source_url": "https://www.springhilltn.org/DocumentCenter/View/10522/Unified-Development-Code--Revised-December-2025",
      "sort_order": 33,
      "id": "1fc7ddbb2ee621766174315de3750740dd546686037ec9a0d41cfd05217e449e",
      "frame_index": 5930,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "spring-hill-tn",
      "district_code": "R-5",
      "topic": "setbacks",
      "body_md": "Single-family minimum lot area 6,000 square feet, two-family 9,000 square feet, three-family 12,000 square feet, and townhouse lots at least 2,500 square feet each with a 1 acre development site and 9 dwelling units per acre maximum. Maximum height is 40 feet. Building coverage is 35% for single-, two-, and three-family uses and 50% for townhouse development sites. Front build-to and townhouse setbacks vary by building type in Table 4-1.",
      "citation": "UDC Table 4-1",
      "source_url": "https://www.springhilltn.org/DocumentCenter/View/10522/Unified-Development-Code--Revised-December-2025",
      "sort_order": 37,
      "id": "4ffc3b2da75d67ba1b0341ea3a931486a3aae40e12cb1e4ca2923486e5e79bd6",
      "frame_index": 5934,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "spring-hill-tn",
      "district_code": "R-A",
      "topic": "lot_coverage",
      "body_md": "Minimum lot area 2 acres; minimum lot width 200 feet; maximum height 40 feet; maximum building coverage 20%; front setback 30 feet; interior side setback 25 feet; corner side setback 35 feet; rear setback 100 feet.",
      "citation": "UDC Table 4-1",
      "source_url": "https://www.springhilltn.org/DocumentCenter/View/10522/Unified-Development-Code--Revised-December-2025",
      "sort_order": 10,
      "id": "7b91bcea73b1855cfe0bbe4185a7c16dc3d4e13608827d6a54c84926f6b5133b",
      "frame_index": 5951,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "spring-hill-tn",
      "district_code": "R-MH",
      "topic": "lot_size",
      "body_md": "A manufactured home park must have at least 5 acres and may not exceed 4 manufactured homes per gross acre.",
      "citation": "UDC Sec. 4.4.A",
      "source_url": "https://www.springhilltn.org/DocumentCenter/View/10522/Unified-Development-Code--Revised-December-2025",
      "sort_order": 53,
      "id": "16d5f526b4de468e893940cef43be1986da297a9cd7daa53e4f006ae0188a96d",
      "frame_index": 5955,
      "category": "residential",
      "pack_version": 2
    },
    {
      "municipality_slug": "spring-hill-tn",
      "district_code": "RD",
      "topic": "setbacks",
      "body_md": "Minimum lot area is 10,000 square feet, minimum lot width is 100 feet, and maximum impervious surface is 80%. Maximum height is 50 feet in I-1 and I-2 and 80 feet in RD. Front and corner side setbacks are 30 feet. Side and rear setbacks are 10 feet, with larger residential-edge setbacks depending on district and building height.",
      "citation": "UDC Table 6-1",
      "source_url": "https://www.springhilltn.org/DocumentCenter/View/10522/Unified-Development-Code--Revised-December-2025",
      "sort_order": 110,
      "id": "4884b6c14de99b7a7ec0c1f05e34d4b188619374b64720f1e12d158fa491e276",
      "frame_index": 5963,
      "category": "industrial",
      "pack_version": 2
    },
    {
      "municipality_slug": "sterling-heights",
      "district_code": "*",
      "topic": "home_occupation",
      "body_md": "Home occupations are an accessory use in the one family districts (Section 3.03.D), the R-2 district (Section 4.03.D), and mobile home parks (Section 5.01.C). Six limits apply: only permanent residents of the dwelling may work in it; the use must stay wholly inside the dwelling, not in a garage or outbuilding; no alterations, equipment, or machinery uncommon in homes; no more than **20 percent** of the floor area of the house; **no sign of any nature**; and no traffic or parking beyond what a home normally generates (Section 3.03.D.1-6).\n\nThe multiple family articles (Articles 6 and 7) do not list home occupations as an accessory use, so apartment-based businesses are not clearly authorized; ask the Office of Planning before operating one from a multiple family unit.",
      "citation": "Section 3.03.D; Section 4.03.D; Section 31.01",
      "source_url": "https://codelibrary.amlegal.com/codes/sterlingheights/latest/sterlinghts_mi/0-0-0-73412",
      "sort_order": 30,
      "id": "ad9a5af4b33537d3eedd32ba56d19b18b0c6ddc1be408d3787c69dd452e290f6",
      "frame_index": 5973,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "sterling-heights",
      "district_code": "O-R",
      "topic": "height",
      "body_md": "Maximum **2 stories and 30 feet**; height may exceed 30 feet if front, rear, and side setbacks each grow **3 feet for every extra foot** of height (Section 17.04.B).",
      "citation": "Section 17.04.B",
      "source_url": "https://codelibrary.amlegal.com/codes/sterlingheights/latest/sterlinghts_mi/0-0-0-74748",
      "sort_order": 20,
      "id": "0e5f6c57c0c2abe7e37d296ab0630d568d367467a5253779f81ff8d824f9eab1",
      "frame_index": 6033,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "sterling-heights",
      "district_code": "R-90",
      "topic": "setbacks",
      "body_md": "Front and street-side setbacks are measured from the road centerline per the Master Road Plan: local **60 feet**, collector **65**, secondary **73**, major **100**, regional **115 or 142**, cul-de-sac **80 to 90** by radius, freeway **40** from the right-of-way line, private road **30** from the easement (Section 3.04.A.6.a). Side: **8 feet** least one side, **20 feet** total. Rear: **35 feet**, reducible by 5 feet where the lot abuts a private open space at least 20 feet deep in the development (Section 3.04.A.6.b-c, A.11). The projection and corner-clearance rules of Sections 28.10 and 28.03 apply as in every one family district.",
      "citation": "Section 3.04.A.6",
      "source_url": "https://codelibrary.amlegal.com/codes/sterlingheights/latest/sterlinghts_mi/0-0-0-73428",
      "sort_order": 2,
      "id": "87784fbd64ed86f9dabef96f402cd1a5bc7261791042d8364c49b8549ba8a971",
      "frame_index": 6074,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "surprise-az",
      "district_code": "*",
      "topic": "parking",
      "body_md": "Off-street parking is set by use in LDO Chapter 107, Article IV (Parking and Loading Regulations), primarily Table 107-4c (Sec. 107-4.9). Representative residential ratios: single-family dwelling 2 spaces per unit, plus 0.2 spaces per unit for lots 40 feet wide or less (visitor/overflow parking); two-family (duplex) and three-family (triplex) 2 per unit; multi-family (4 or more units) and live/work dwellings 2 per unit; townhouse 2 per unit plus 1 per 500 square feet of community facility uses plus 0.2 spaces per unit for visitor parking; group home same as a dwelling. Representative non-residential ratios: office and medical office 1 per 250/200 square feet GFA; retail shopping 1 per 400 square feet GFA; restaurant 1 per 100 square feet GFA (1 per 150 for convenience/take-out); bar 1 per 100 square feet GFA; many industrial/warehouse/manufacturing uses 1 per 1,000-1,500 square feet GFA; several large-format and public uses (fairgrounds, post office, public facility, warehouse/distribution) are determined by a parking study submitted with the site plan rather than a fixed ratio. Chapter 107 also sets separate R-1/R-2/SHD-RO residential provisions (Sec. 107-4.3), dimensions (Sec. 107-4.5), bicycle parking (Sec. 107-4.6), off-street loading (Sec. 107-4.7), and shared parking (Sec. 107-4.8). This pack's ratios are representative, not exhaustive; confirm the exact ratio for a specific use with Planning and Zoning (623-222-3000) or the Municode publication.",
      "citation": "Sec. 107-4.9, Table 107-4c",
      "source_url": "https://library.municode.com/az/surprise/codes/municipal_code?nodeId=PTIILADEOR_CH107DEDERE_ARTIVPALORE_S107-4.9MIOREPARE",
      "sort_order": 1,
      "id": "b1d55b1ec320d595086b326de01d7d0d63a4a0d6d9651230d24e0afa4cbbc13b",
      "frame_index": 6103,
      "category": "special",
      "pack_version": 1
    },
    {
      "municipality_slug": "surprise-az",
      "district_code": "C-O",
      "topic": "permitted_uses",
      "body_md": "Office and service uses that limit impact on and can be integrated within a residential neighborhood, plus smaller supportive shops and dining. Applicable in rural, suburban, urban, and community commercial development types under the General Plan. The full use standards are in Sec. 106-6.2. Confirm the current use table with Planning and Zoning (623-222-3000) before acting.",
      "citation": "Sec. 106-6.2.A",
      "source_url": "https://library.municode.com/az/surprise/codes/municipal_code?nodeId=PTIILADEOR_CH106ZOUSST_ARTVICOZODI_S106-6.2ESCOZODI",
      "sort_order": 1,
      "id": "c4a36df08b53a24cbecb14e5e4bad0e13ca9ea4e98d396f1a633bb3ceb940860",
      "frame_index": 6118,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "troy",
      "district_code": "MF",
      "topic": "permitted_uses",
      "body_md": "MF is Troy's multiple-family district. Multiple-family dwellings are the core use, with density and height set by whether the site abuts a single-family district (Section 4.08.C). For the full list of permitted and special approval uses, check the Section 4.21 schedule. Special approvals go to the Planning Commission (Section 9.02.D).",
      "citation": "Section 4.21; Section 4.08",
      "source_url": "https://troymi.gov/ZO%2005%2012%2026%20FINAL.pdf",
      "sort_order": 1,
      "id": "fbd2f811f965393e870bdf496fc88945bae330d4726f4286401aedd13e2a1920",
      "frame_index": 6177,
      "category": "residential",
      "pack_version": 5
    },
    {
      "municipality_slug": "troy",
      "district_code": "R-1E",
      "topic": "height",
      "body_md": "Maximum **2.5 stories or 30 feet** (Section 4.06.C).",
      "citation": "Section 4.06.C",
      "source_url": "https://troymi.gov/ZO%2005%2012%2026%20FINAL.pdf",
      "sort_order": 1,
      "id": "907d789eb00fdfcd252e549784192ba2fb5972dbcc3ed1bdf70f40ed3d2931c3",
      "frame_index": 6210,
      "category": "residential",
      "pack_version": 5
    },
    {
      "municipality_slug": "wake-forest-nc",
      "district_code": "HB",
      "topic": "height",
      "body_md": "Maximum **50 feet**, or **90 feet** in the US-1 Corridor with an approved Special Use Permit. Confirm the current zoning map, any Conditional Zoning or Conditional District case, and the cited section text before acting.",
      "citation": "UDO Sec. 2.2.5 chart",
      "source_url": "https://online.flippingbook.com/view/703728449/18/",
      "sort_order": 1,
      "id": "e7853ca6d1bb63b8e0b8767b4dbc88e50b8937ddafe0a6a45dc41cd7c91530c2",
      "frame_index": 6238,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "wake-forest-nc",
      "district_code": "NMX",
      "topic": "setbacks",
      "body_md": "Front setback is a **maximum of 12 feet**. Minimum building frontage buildout is **60 percent** of the lot's street frontage. Side and rear setback exact figures are review-gated; see UDO Sec. 2.2.3 chart. Confirm the current zoning map, any Conditional Zoning or Conditional District case, and the cited section text before acting.",
      "citation": "UDO Sec. 2.2.3 chart",
      "source_url": "https://online.flippingbook.com/view/703728449/15/",
      "sort_order": 1,
      "id": "81216071566a5f03554b6d98e676635dfa26b648437b447db2e50968198f3db3",
      "frame_index": 6255,
      "category": "mixed",
      "pack_version": 1
    },
    {
      "municipality_slug": "wake-forest-nc",
      "district_code": "RA HC",
      "topic": "permitted_uses",
      "body_md": "Downtown historic core mixed use. One accessory dwelling per lot is permitted for detached-dwelling lots (Sec. 3.2.3). Home occupations are accessory-use only. This district is also subject to historic preservation standards referenced in the UDO. The full use table is in Sec. 2.3.3.",
      "citation": "UDO Sec. 2.3.3 use table",
      "source_url": "https://online.flippingbook.com/view/703728449/39/",
      "sort_order": 1,
      "id": "ee4ae7c0f73f416061efdfa1563336932723d7cc6ef478350208eb885634562c",
      "frame_index": 6261,
      "category": "mixed",
      "pack_version": 1
    },
    {
      "municipality_slug": "wake-forest-nc",
      "district_code": "UMX",
      "topic": "setbacks",
      "body_md": "Front setback is a **maximum of 6 feet**. Minimum building height is **16 feet**. Side and rear setback exact figures are review-gated; see UDO Sec. 2.2.3 chart. Confirm the current zoning map, any Conditional Zoning or Conditional District case, and the cited section text before acting.",
      "citation": "UDO Sec. 2.2.3 chart",
      "source_url": "https://online.flippingbook.com/view/703728449/15/",
      "sort_order": 1,
      "id": "719cc1fc07d467dbceff3697026f9e413100847ac1a5aa508babfbf4746b7a7e",
      "frame_index": 6273,
      "category": "mixed",
      "pack_version": 1
    },
    {
      "municipality_slug": "waxahachie-tx",
      "district_code": "GR",
      "topic": "parking",
      "body_md": "As established by Section 4.03.",
      "citation": "Appendix A, Sec. 3.16",
      "source_url": "https://library.municode.com/tx/waxahachie/codes/code_of_ordinances?nodeId=COOR_APXAZO_S316",
      "sort_order": 1,
      "id": "f202be79666b88500b8ec45f01566d4c0a88679f2991f5a5ffef9b69629b17e1",
      "frame_index": 6321,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "waxahachie-tx",
      "district_code": "HI",
      "topic": "parking",
      "body_md": "As established by Section 4.03.",
      "citation": "Appendix A, Sec. 3.21",
      "source_url": "https://library.municode.com/tx/waxahachie/codes/code_of_ordinances?nodeId=COOR_APXAZO_S321",
      "sort_order": 1,
      "id": "35e45d14d1788a9a39798d53d01a9566ef7ce50316c1e5a971a8f88ce71fa5a5",
      "frame_index": 6326,
      "category": "industrial",
      "pack_version": 1
    },
    {
      "municipality_slug": "waxahachie-tx",
      "district_code": "LI1",
      "topic": "setbacks",
      "body_md": "Minimum front yard 40', side yard 30', rear yard 30'.",
      "citation": "Appendix A, Sec. 3.19",
      "source_url": "https://library.municode.com/tx/waxahachie/codes/code_of_ordinances?nodeId=COOR_APXAZO_S319",
      "sort_order": 1,
      "id": "a681a1798120fe90c4809285681a0e9cb4ab3d9313371d5fcfa84cd4db1c1336",
      "frame_index": 6327,
      "category": "industrial",
      "pack_version": 1
    },
    {
      "municipality_slug": "waxahachie-tx",
      "district_code": "LI2",
      "topic": "height",
      "body_md": "Maximum height: 6 stories",
      "citation": "Appendix A, Sec. 3.20",
      "source_url": "https://library.municode.com/tx/waxahachie/codes/code_of_ordinances?nodeId=COOR_APXAZO_S320",
      "sort_order": 1,
      "id": "4a4c8816be9b3d4c4f0c46ef9fd652f46c507058bd140b580a71fdc696fab581",
      "frame_index": 6333,
      "category": "industrial",
      "pack_version": 1
    },
    {
      "municipality_slug": "waxahachie-tx",
      "district_code": "MF2",
      "topic": "setbacks",
      "body_md": "Minimum front yard Adjacent to SF - 25'. 75' if over two stories. Adjacent to MF or Nonresidential - 25'. 100' if over 2 stories, side yard Adjacent to SF - 50'. 75' if over two stories. Adjacent to MF or Nonresidential - 25'. 100' if over 2 stories, rear yard Adjacent to a residential; 50', over two story is 75'.",
      "citation": "Appendix A, Sec. 3.09",
      "source_url": "https://library.municode.com/tx/waxahachie/codes/code_of_ordinances?nodeId=COOR_APXAZO_S309",
      "sort_order": 1,
      "id": "0df5f5ff5433e42689e64a227b4ade63ff1525e653ee5e9c4950e455fec660e3",
      "frame_index": 6342,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "waxahachie-tx",
      "district_code": "MF2",
      "topic": "lot_coverage",
      "body_md": "Maximum lot coverage 40% by main and accessory buildings.",
      "citation": "Appendix A, Sec. 3.09",
      "source_url": "https://library.municode.com/tx/waxahachie/codes/code_of_ordinances?nodeId=COOR_APXAZO_S309",
      "sort_order": 1,
      "id": "6753ec1afcacd40566bd327a86332e1778248eb3a8e84c3581c07bd94ac6a548",
      "frame_index": 6344,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "waxahachie-tx",
      "district_code": "MH",
      "topic": "lot_size",
      "body_md": "Minimum lot area 3,000 SF per unit, minimum lot width 35', minimum lot depth 80'. Minimum dwelling unit area 650 SF.",
      "citation": "Appendix A, Sec. 3.10",
      "source_url": "https://library.municode.com/tx/waxahachie/codes/code_of_ordinances?nodeId=COOR_APXAZO_S310",
      "sort_order": 1,
      "id": "8808a61d5f5b30bf7dd2a0f1a4819f858b579e372c8a0f5c977305f484fa8f02",
      "frame_index": 6349,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "waxahachie-tx",
      "district_code": "MUNR",
      "topic": "lot_coverage",
      "body_md": "Maximum lot coverage 50% if 50% of parking for MF portion is provided by attached, enclosed garages. 50% maximum. Lower lot coverage to match percentage of attached, enclosed garages..",
      "citation": "Appendix A, Sec. 3.13",
      "source_url": "https://library.municode.com/tx/waxahachie/codes/code_of_ordinances?nodeId=COOR_APXAZO_S313",
      "sort_order": 1,
      "id": "b43f0cfb46b48faf14d51de66f397e95459fe91e53c404d3bd1eb3fd4fe2db9f",
      "frame_index": 6353,
      "category": "commercial",
      "pack_version": 1
    },
    {
      "municipality_slug": "waxahachie-tx",
      "district_code": "SF2",
      "topic": "lot_coverage",
      "body_md": "Maximum lot coverage 50% by main and accessory buildings.",
      "citation": "Appendix A, Sec. 3.05",
      "source_url": "https://library.municode.com/tx/waxahachie/codes/code_of_ordinances?nodeId=COOR_APXAZO_S305",
      "sort_order": 1,
      "id": "e54650f5fcdf87d0131d2cc9cbaba1e60818f8d5bbb13d0975317d486d380282",
      "frame_index": 6383,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "waxahachie-tx",
      "district_code": "SF3",
      "topic": "setbacks",
      "body_md": "Minimum front yard 30', side yard 10'; 15' on corner lots adjacent to a street, rear yard 25'.",
      "citation": "Appendix A, Sec. 3.06",
      "source_url": "https://library.municode.com/tx/waxahachie/codes/code_of_ordinances?nodeId=COOR_APXAZO_S306",
      "sort_order": 1,
      "id": "1c7468a8201df6f8857e447d9778b76091b802ff116faa5954739ee80468fff1",
      "frame_index": 6386,
      "category": "residential",
      "pack_version": 1
    },
    {
      "municipality_slug": "wylie-tx",
      "district_code": "*",
      "topic": "adu",
      "body_md": "Accessory dwelling and secondary living quarters are treated through the use charts in Sec. 5.1 and the definitions in Article 10 rather than a standalone ADU section. Whether a second dwelling is allowed depends on the district; confirm in Sec. 5.1 and with Planning and Zoning.",
      "citation": "Appendix B, Article 5 Use Regulations and Article 10 Definitions",
      "source_url": "https://library.municode.com/tx/wylie/codes/code_of_ordinances?nodeId=PTIICOOR_APXBZO_ART5USRE",
      "sort_order": 1,
      "id": "9265904fe02f3717286d55df023b698b060b57919303035858a55cd3bca90b99",
      "frame_index": 6391,
      "category": "special",
      "pack_version": 2
    },
    {
      "municipality_slug": "wylie-tx",
      "district_code": "CC",
      "topic": "setbacks",
      "body_md": "Front yard setback 25 ft, side yard 10 ft, rear yard 10 ft. Side and rear yard setbacks double where adjacent to single-family or multifamily, with required landscaping and screening.",
      "citation": "Appendix B, Sec. 4.1, Figure 4-3",
      "source_url": "https://library.municode.com/tx/wylie/codes/code_of_ordinances?nodeId=PTIICOOR_APXBZO_ART4NSIDIRE_S4.1CODI",
      "sort_order": 1,
      "id": "cd0143f9ec0c7d8754488e9622dee460e22729d1cf67037654d9c7ac8e259a66",
      "frame_index": 6405,
      "category": "commercial",
      "pack_version": 2
    },
    {
      "municipality_slug": "wylie-tx",
      "district_code": "CR",
      "topic": "height",
      "body_md": "Maximum height 36 ft and 2 stories. Residential proximity is controlled by a 3:1 slope plane from any residential lot line.",
      "citation": "Appendix B, Sec. 4.1, Figure 4-2",
      "source_url": "https://library.municode.com/tx/wylie/codes/code_of_ordinances?nodeId=PTIICOOR_APXBZO_ART4NSIDIRE_S4.1CODI",
      "sort_order": 1,
      "id": "8c83f41b78b4e1aa1002630875f6c9e55aa93940bd6da21b9ff1e853160839f5",
      "frame_index": 6410,
      "category": "commercial",
      "pack_version": 2
    },
    {
      "municipality_slug": "wylie-tx",
      "district_code": "SF-20/26",
      "topic": "height",
      "body_md": "Main structure maximum height 40 ft; accessory structures 15 ft.",
      "citation": "Appendix B, Sec. 3.2, Figure 3-3",
      "source_url": "https://library.municode.com/tx/wylie/codes/code_of_ordinances?nodeId=PTIICOOR_APXBZO_ART3REDIRE_S3.2MENSREDI",
      "sort_order": 1,
      "id": "2f71a0c78196eb00fd4b3b0080828dec28274cf5048137103a08002b0786ae91",
      "frame_index": 6439,
      "category": "residential",
      "pack_version": 2
    }
  ],
  "assessments": [
    {
      "id": "1949413172bdf5053ce1300b86955f786ac9b08b2579688073519084ac26bfa3",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "anna-tx",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "9622419d2a5f73fd41c568c1db1c8905536469bb45a5fbbabfaa196d3a626bc0",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Sec. 9.04.026(b), p.24: 'Any use specified in a Planned Development (PD) district shall be permitted in that district. The size, location, appearance, and method of operation may be specified to the extent necessary to ensure compliance with the purposes of this Article.' (d)(1), pp.24-25: development standards 'shall be established in the ordinance granting the [PD] district and may include ... uses'. (d)(2), p.25: 'All Planned Development (PD) district applications shall list all requested variances from the standard requirements established throughout this Zoning Ordinance. The applicant shall include justification associated with each requested variance. Applications without this list will be considered incomplete.'",
      "reason": "Each published assertion matches the primary text. Permitted uses are those specified in the PD's ordinance. Size, location, appearance, and method of operation may be specified in that ordinance. Applications must list requested variances from ordinance-wide standards, with justification. The (b) and (d)(2) citations are correct. 'Citywide' is a harmless paraphrase of 'throughout this Zoning Ordinance'. The row correctly presents PD uses as dependent on the adopting ordinance, not as universally permitted. The blind reading agrees.",
      "published_kind": "conditional_or_referential",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "anna-tx"
    },
    {
      "id": "e83c0c7925eb0c601a200940c9aea9b6b4e35a5168a3377a450ac80df43da6ad",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Sec. 9.04.025(c), p.24: '(1) Building lots along a highway, as designated by the Master Thoroughfare Plan, shall be a minimum of one acre. (2) The nonresidential minimum lot width is 100 feet. (3) The nonresidential minimum front yard setback is 50 feet.' (b): applies to 'new development and redevelopment located within the greater of a geographic buffer extending outward 500 feet perpendicularly from the right-of-way, or to the back of abutting adjacent lots' along the listed thoroughfares. (d): 'The Downtown (DT) District shall be exempt from the Thoroughfare Overlay (THOR) District.'",
      "reason": "All three published figures match Sec. 9.04.025(c)(1)-(3) exactly: 50 ft nonresidential front setback, 100 ft nonresidential lot width, and a 1-acre minimum for lots along an MTP highway. The citation is correct. 'Within the THOR corridor buffer' fairly reflects the applicability language in (b). The DT exemption in (d) removes DT land from THOR, so it does not contradict a statement scoped to the THOR district. The blind reading agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "anna-tx"
    },
    {
      "id": "a228afdb92fc2b4dc57acb240af73c08f1206396f3fdab2ff691a1fb8e49ed48",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Art. 1 p.2, Sec. 1.4.1: 'The provisions of this Ordinance shall apply to all development and the use of all structures on all lands and waters within the corporate limits of the Town of Apex and within the ETJ, except within the Town of Cary's zoning jurisdiction, as mutually established and adopted by the Town boards of Apex and Cary during August, 1969.' Sec. 1.4.4: 'Bonafide farms, as defined by the North Carolina General Statutes are exempt from the provisions of this Ordinance.'",
      "reason": "The material assertions are supported by Sec. 1.4.1 and 1.4.4: coverage of corporate limits plus ETJ, the Cary-jurisdiction exception from August 1969, and the bona fide farm exemption. The word 'small' describing the Cary area is not stated in the source, but it is nonmaterial characterization. The advice to confirm with Planning is not a legal assertion. The blind extractor read the topic as Special Use Permits (Sec. 2.3.5) rather than jurisdictional applicability, so its disagreement does not bear on this published statement.",
      "published_kind": "explicit_standard",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "apex-nc"
    },
    {
      "id": "a09bb946038ced13b25139d1c8798016e2c7d7c9c10d66ec6d01f140d582f3ed",
      "status": "error",
      "error_class": "omission",
      "severity": "high",
      "evidence": "HDSF / Single Family: Max. Density (Gross Units per Acre) = 8.",
      "reason": "Visually inspected table row and column grid. The published express claim of no listed single-family density cap is false, not merely an omitted optional detail. All 65% coverage figures agree.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "apex-nc",
      "district_code": "HDSF",
      "topic": "lot_coverage",
      "decision": "confirmed_error",
      "original_assessment_status": "error",
      "original_error_class": "omission",
      "original_severity": "high",
      "operative_quote": "HDSF / Single Family: Max. Density (Gross Units per Acre) = 8.",
      "source_url": "https://apexnc.org/DocumentCenter/View/551",
      "source_file": ".tmp/accuracy/source-bodies/apex-nc/cff9323ba0dd3e47.pdf",
      "source_pdf_pages": [
        2
      ],
      "source_sha256": "4c68eb89136670b51dc988b3b9bd4e5e6fb5667e2c1a7b27565b44281600fabb",
      "proposed_replacement": "Maximum built-upon area **65 percent** for single family, duplexes, townhouses, and townhouses (detached). Maximum density: single family and duplexes **8 gross units per acre**; townhouses (detached) **7 gross units per acre** (Sec. 4.4.1.J).",
      "proposed_citation": "Sec. 5.1.1 chart (HDSF rows)",
      "publication_changed": false
    },
    {
      "id": "e1f3fa5b3caeb050585b681d860f665aa11fadb3e69fed7ec1ae9f92dd169156",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Art. 5 p.1, Sec. 5.1.1 LD rows, Max. Height (Feet) column: Church or place of worship '48'; Single family '40'; School '5 stories and 75'; All other uses '36'.",
      "reason": "All four height values match the LD rows exactly, as does the citation to the Sec. 5.1.1 LD row. The blind extraction agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "apex-nc"
    },
    {
      "id": "4cc4d85e90441d1af40b5f5d1be57b465dd96f16722553e7b22510e1b80848af",
      "status": "error",
      "error_class": "transcription",
      "severity": "medium",
      "evidence": "Table heading: Average Lot Size. LD / Single family: 10,000 square feet; Minimum Lot Width (Feet): 50; Additional Regulations: Sec. 5.2.3.B.",
      "reason": "Visually inspected header and LD single-family row. Averaged lot-size standard was stated as a per-lot minimum. The table itself does not justify dropping average.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "apex-nc",
      "district_code": "LD",
      "topic": "lot_size",
      "decision": "confirmed_error",
      "original_assessment_status": "error",
      "original_error_class": "transcription",
      "original_severity": "medium",
      "operative_quote": "Table heading: Average Lot Size. LD / Single family: 10,000 square feet; Minimum Lot Width (Feet): 50; Additional Regulations: Sec. 5.2.3.B.",
      "source_url": "https://apexnc.org/DocumentCenter/View/551",
      "source_file": ".tmp/accuracy/source-bodies/apex-nc/cff9323ba0dd3e47.pdf",
      "source_pdf_pages": [
        1
      ],
      "source_sha256": "4c68eb89136670b51dc988b3b9bd4e5e6fb5667e2c1a7b27565b44281600fabb",
      "proposed_replacement": "Single family: required **average lot size 10,000 square feet** and minimum lot width **50 feet**. Apply the additional lot-size provisions in Sec. 5.2.3.B.",
      "proposed_citation": "Sec. 5.1.1 chart (LD single-family row); Sec. 5.2.3.B",
      "publication_changed": false
    },
    {
      "id": "c9b7c1633265bf659f060caa33f81c18e9331d1ee87e4e5a9a73089f0d949a3d",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "apex-nc",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "bf089bfe67da1631278452994b631a28685a034d7c6db6b8efb6e954f2b670a7",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Art. 5 p.2, Sec. 5.1.1 MH rows: 'Manufactured home ___ ___ 25 8 25 15 24 65 6'; 'Single family home ___ ___ 25 8 25 15 24 65 6' (Front, Side, Rear, Corner Side).",
      "reason": "The front 25, side 8, rear 25 and corner side 15 setbacks for manufactured home and single family home match the MH rows. The publication does not need to repeat the separate school and all-other-uses rows. The blind extraction agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "apex-nc"
    },
    {
      "id": "fc275dcd8a44881d7aa6c4811d36e6aecd2c9b8d38c27b10e990b9bb19098c9b",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Art. 8 p.43, Sec. 8.3.2.A: 'Unless otherwise expressly stated in this Code, off-street motor vehicle and bicycle parking spaces shall be provided in accordance with Table 8.3-1.' Table 8.3-1 (p.45): 'Medical office or dental clinic or offices 1 per 200 square feet of gross floor space'; 'Office, business or professional 1 per 300 square feet'.",
      "reason": "Table 8.3-1 is organized by use, not by zoning district, and has use-specific rows for office/business/professional and for medical/dental clinic. The publication's reference to that table is accurate. The blind extraction agrees, with additional detail.",
      "published_kind": "conditional_or_referential",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "apex-nc"
    },
    {
      "id": "dd0a0b1755470f5be8965d234aae74906102be239aca5322be152c8634781e31",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Art. 5 p.4, Sec. 5.1.2 TF rows: 'School ... 5 stories and 75 | 70'; 'All other uses ___ 20 20 20 20 48 70'. Max. Built-Upon Area (%) column.",
      "reason": "The 70% maximum built-upon area applies to both TF rows, and the citation to the Sec. 5.1.2 TF row is correct. The blind extraction agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "apex-nc"
    },
    {
      "id": "d4ce63d353304e7e97be2fa833eb5f6b29628345a2b578f142ce593d6a042823",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "aubrey-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "1e78da85c6f0b72e4b196f89d322625efb6406f70471fd38a19f86c7f16a3172",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "aubrey-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "d64484631c737a701e0a768ba1b9bc4873a57ef6f5e8fe52bc457fe59f92a7eb",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "aubrey-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "b2e66fbec6545fc7ea5d0a99141e4fbf5fac732009f971ef25a8dcf54189d050",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "birmingham",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "cd2930bb46ffdd4999a689b7a2f2b45f530e99ccea84fc4f7e171d4374bb1fc9",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "birmingham",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "22de0c9f98240557a3c60a6c0b588cd14e237dbfe3f1799ddbfb1f0e789c91c6",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "birmingham",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "e6358cdc111b2cf156d1db8901221c39b8df7dc687cdf3d8f97e4bf33b0c2875",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "birmingham",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "6391d977372b53e4cafff1174e235662884080075e39e2c54edea6b7fce68aa8",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "buckeye-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "a3c08d17035d8fb5e81feaad45cbbf7104395be973bb92713285d40359e75a34",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "buckeye-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "49c8745a479e16a7655a2d58b2cccddb7ea9fa6fb27cb3fcf6570c4b5e000abd",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "buckeye-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "0f9df4fa6eb11db1f500e65ceaef507035b6259eeb45d258e125e050ff02c2f6",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "buckeye-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "9f35afa8521efeae9fdad0dae4bd0f729dafc224571fbc23b25482acb3b73589",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "buckeye-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "a02bd52e26dd038d390babaf9017473b4a6b8441c1577c187391a37402e79cf9",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "buda-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "ff615b383d0b85e7a7810a4a8bf7a38b8bd2275fbfb92c9b7fcc5e2908e9707e",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "buda-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "3e9fefc921bb6085f549bd48986597cacf5071826cbf19efa1217b0cd8c47c19",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "buda-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "60d2b49f860efa9b947a6bc340cbc53eb34f0e2a4d8e24e72ead9c42dfbf961f",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "buda-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "d08a9ba48669c14d6d2f8e79fa7a7c9d22e91ef75042119ff774723600251b49",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "buda-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "7d04c562fa889248fb58eb4d605349cb00a542f8f2e21208a28ec6a7a8df17a3",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "buda-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "622e6427a04156a4bd6e023232c94206ac7133ac468c045f4fbcf7f9e62b50b0",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "buda-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "80a40dd8bab722d1339397f63f9459a381ecc9ec6b2d9e17b68bd6470e39b523",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "buda-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "1eab1bc5223ae8aac24c5781dabdcebe72a052ec2acb6a0bf0842b1ce4dd6e4b",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "buda-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "6507443de0d088ae77afa20915f37d507eac090ff39d61a5e1862a9cedd8a790",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "buda-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "ac993d08a8fca07e2923feca80d1ca2e04fbaf11140313e382cffd40bf631510",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "canton-township",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "f9cc732c5f76bbb93720acc059b4592121dbd8b2d0d86a08e254b47417fc97a2",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "canton-township",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "416ad3ee16a8499adc3017cc316dac4bc2ec3db5969e062186f73a14dc595aad",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "canton-township",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "e3c9661c535b604c20b0530231b75a6c7eade10e38cf0f690e0f55d147f54117",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "canton-township",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "55fe477ea41060fe876528169050fcdbbb5e2f5603983ce3ca93c51e65bd6f02",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "canton-township",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "04bb8ae5a28dda09614bbd05ae882ad4feae74b2a1caf8bbb8ce83ebdea941a8",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "canton-township",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "c7e50185f898004e6b51ec2b076dcd57e7f45068aef51bf6850f8e8bec03fbd3",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "canton-township",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "b9146e6354ef501ebc9f8e2f0fadbce0c0566a2c3c8b5b9287c7756b5cc59167",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "canton-township",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "5405341acd57889dfb6260ef32d8f5226a86517d8fa630c693f30551b7d36b4a",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "cape-coral-fl",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "ed8457a1a192283c2cca3529635303459d5b2d2ee7e9b476b70a2371176ad6c6",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "cape-coral-fl",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "73736deedcf93cbbbb65771cba0470499c63aaa170a54f227972f6612027f286",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "cape-coral-fl",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "dd8333a159e8118ec3afe3bbe172c879c9ba50f141eb2a95cfa6203432e0af44",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "cape-coral-fl",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "0c146679d3dc9d9785730251447398dd52f5560c4c224b448a91d3273bd1aed8",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "cedar-park-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "140ed99baaebde1bc800d677509cd208dfc6d216bb7e1e2fd4fb80f757e54734",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "cedar-park-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "386f927786bc308cab60dbf2177d9c07db884c9bbfec9e37311fd59a771f32b8",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "cedar-park-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "59d71375e414e4caaec8eba95d43910b7e63262015eedbb9b31f827de9384dd8",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "cedar-park-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "334244baae6fd982e3362bdb20909482188f943e7e59119bf1505aeee1fff5cd",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "cedar-park-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "c62ed0a383e0c538b599529a62204fdf750b4dfc21c95493abc9946ba6621c7e",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "cedar-park-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "28f8f4f33eb74e16d61a26cee5aeec9086f129e2eb574c45a7ab9ce1d8157629",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "cedar-park-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "7aa87637a60ab92e7abc0b835a92734993e017a2ae556196a3dfea6c96a38b38",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "cedar-park-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "9702c31d098c66a2ac9f739856517fe20a87f33e7ea1f1c3cb8594a90c9cad67",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "celina-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "67c49b815b04ed51b9fd8f8b7651cb2fd826bcac2cb9d6e78d16c68fdd165b3a",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "celina-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "0e97fa9213c594fffca3744b690954e6e8b4ca6f14f7e5aedc270986e5d13969",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "celina-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "30f40261cd4e60e0de8d3c8160b63c93779010e06bda6a501b098a8256805c57",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "celina-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "1f315c8e05a4ec347044385203ea990edfe0a667aa4520deb0184f07cb1808c5",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "celina-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "c7c6e4012e05a2b306605fa4a907945c8c86b7d1d2fce8c5a343a9eff4e8de8b",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "celina-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "f3229172cbd4f0da690ee01f078bf962e8da09b45faac0fc6603cf96ed2df2a0",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "celina-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "a7cf0c0347af2a22cfc5ffc12fd112fe6d1c03ce4e00b9727868433dca7558a2",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "columbia-tn",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "9b84bb3d7975ea7f318a5b1546994fe849e39720a944c3e427e59a8613f0f83c",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Table 4.3.1-B (CD-3L District Standards), Lot Occupation, p.58: 'Impervious Surface Coverage NR'. Contrast Table 4.3.1-C (CD-3), p.67: 'Impervious Surface Coverage 50% max'. The NR = not regulated reading is supported by SD-HI Table 4.3.1-K p.140 ('Block Perimeter Not Regulated'). Section 1.9.2, p.15, references the Columbia Municipal Code chapters including 'Zoning and Land Use Controls-Stormwater Management (Title 14, Chapter 4)', and states that a violation of those chapters 'shall constitute a violation of this Ordinance'.",
      "reason": "The core assertion matches the CD-3L table: the impervious surface coverage cell is NR, so there is no numeric cap. The citation to Table 4.3.1-B's Impervious Surface Coverage row is accurate. The note that Title 14 Chapter 4 stormwater management still applies is supported by Section 1.9.2. Its gloss as applying to land disturbance and drainage design is a general description and not a material misstatement. The blind reading agrees.",
      "published_kind": "no_standard",
      "blind_kind": "no_standard",
      "municipality_slug": "columbia-tn"
    },
    {
      "id": "6e41aa3d916b61229849ec021c6ebf73288c07eab75cee0686bff920975364ec",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "columbia-tn",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "f36690f1bfe75ae822a4cfd1c7a7c0b0edf32e680ae94e6069b03f9a143a9143",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Article 8, §8.5.3 (p. 8-96): 'Home occupations are authorized if they comply with the performance standards set forth in Table 8.6-1.' §8.5.4 (p. 8-96): 'The following Uses shall not be permitted as home occupations in Residential Zoning Districts: medical/dental office, motor vehicle repair ... retail sales, commercial food preparation (excluding catering pursuant to 8.5.8), contractors shops ... tattoos, or any type of physical or psycho therapy'. Table 8.6-1 (pp. 8-99 to 8-100) supplies the performance standards. §8.4.1.A (p. 8-86) lists 'Home Occupations (subject to § 8.5) — All Residential Zoning Districts'.",
      "reason": "The source supports each material assertion: compliance with §8.5 and Table 8.6-1 is required, and retail sales plus other listed activities are prohibited as home occupations in residential districts. The citation 'CDO Sec. 8.5 and Table 8.6-1' matches the source. The snapshot filenames are internal references, not legal assertions. The row does not restate the table's numeric limits, but it refers to the table rather than claiming no standard exists. The blind reading agrees and adds detail.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "concord-nc"
    },
    {
      "id": "91a20d616af02d7ed82febd2993cddd586562053c4e7d9afd65243945ffca184",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "concord-nc",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "f5603de238bb70c758390722efec7b445855af3359e2d0b0906d670de6558b31",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Article 7, Table 7.6.2 A (p. 17), C-2 row: 'C-2 - - 0.8 30^ 50 100 48 (1)'. Note (1): 'Height may be increased by one foot for each one foot of additional building setback up to a maximum height of 200 feet.' §7.6.2.D (p. 15) covers height measurement. §7.6.2.E (p. 16) says 'The AO Airport Overlay zone regulations shall govern the height of all structures within the boundaries of the Airport Overlay zoning district.' §7.6.2.F lists exceptions (spires, chimneys, rooftop appurtenances ≤33% of roof area). §7.6.2.G covers height transitions.",
      "reason": "The 48 ft value and the '(1)' note marker are transcribed correctly. The stated qualifications (measurement, airport overlay, exceptions, transitions in §7.6.2 D–G) all exist in the cited sections. The row does not explain that Note (1) allows up to 200 ft with added setback, but it does reproduce the note marker, so the omission is not treated as a material error. One minor point: §7.6.2.G applies only to the R-C district, so it is cited broadly but harmlessly. The blind reading agrees on 48 ft.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "concord-nc"
    },
    {
      "id": "2006d3c4e6abf728182490440b59c0db47721227bbd04e86fba5dd3c364cd88a",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "concord-nc",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "9494a0164768bc78547d80f5feaf900e67348c668c4daed7b2746ec742b3c379",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Article 7, Table 7.6.2 B (p. 18), RL row: 'RL 35 - 152 30 5 5'. The columns are Min. Front / Max. Front / Min. Interior Side (note 2) / Min. Rear for principal structures, then Min. Interior Side / Min. Rear for accessory structures. That gives 35 ft front, no maximum front, 15 ft interior side (note 2), 30 ft rear; accessory 5 ft side and 5 ft rear.",
      "reason": "Every published number matches the RL row: front 35, maximum front '-', interior side 15, rear 30, accessory side 5, accessory rear 5. The citation is correct. The row does not mention Note (2) side reductions or §7.6.2.C front-yard averaging, but those are ordinary exceptions and the row tells readers to verify the cell. The blind reading agrees exactly.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "concord-nc"
    },
    {
      "id": "ce6b3c559108d6986dbb3ec0d9266971d67e22bc8c337d15666df9194b1e77f0",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Article 7, Table 7.6.2 B (p. 18), RM-2 row: 'RM-2 25 - 102 25 5 5'. That gives 25 ft front, no maximum front, 10 ft interior side (note 2), 25 ft rear; accessory 5 ft side and 5 ft rear.",
      "reason": "Every published value matches the RM-2 row: 25, '-', 10, 25, 5, 5. The citation 'CDO Table 7.6.2 B' is correct. Unmentioned items (Note 2 reductions, front averaging, §7.8 multifamily setbacks) are normal exceptions and do not contradict the row. The blind reading agrees exactly.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "concord-nc"
    },
    {
      "id": "2b508f635ee2ffe5e048011fa0272257c698c31134ee6e263780be999a61e428",
      "status": "error",
      "error_class": "omission",
      "severity": "medium",
      "evidence": "Lot Coverage Percentage / All buildings on the lot (max): 20%.",
      "reason": "Visually inspected Fig.3.2-2. Published lot-coverage answer exposes internal facts.md/snapshot paths and withholds the explicit usable cap; it also attributes an open-space standard to a table that has no such row. This is answer incompleteness, not a wrong numeric extraction.",
      "published_kind": "conditional_or_referential",
      "blind_kind": "explicit_standard",
      "municipality_slug": "fate-tx",
      "district_code": "A",
      "topic": "lot_coverage",
      "decision": "confirmed_error",
      "original_assessment_status": "error",
      "original_error_class": "omission",
      "original_severity": "medium",
      "operative_quote": "Lot Coverage Percentage / All buildings on the lot (max): 20%.",
      "source_url": "https://www.fatetx.gov/DocumentCenter/View/4319/Article-III_Zoning-Districts_Final_20240701",
      "source_file": "sources/fate-tx/doc-4319.pdf",
      "source_pdf_pages": [
        5
      ],
      "source_sha256": "4b6da7d556edd57ef7d0acda1525c339398f8e2daa8df161a3f9034a50163ab2",
      "proposed_replacement": "Maximum lot coverage for **all buildings on the lot is 20 percent** (Figure 3.2-2). Other applicable landscaping, parking, screening and drainage requirements must also be met.",
      "proposed_citation": "Article III §3.2.2, Figure 3.2-2",
      "publication_changed": false
    },
    {
      "id": "54821031d086711b33786480143cb808ff6edd36a36d3c1e9ed989b3fac72d74",
      "status": "error",
      "error_class": "omission",
      "severity": "medium",
      "evidence": "Front: On Freeway, Freeway Frontage Road, or Arterial Roadway (min) 20; On All Other Streets (min) 20; Side: (min) 40; Rear: (min) 40.",
      "reason": "Visually inspected Fig.3.3-8. Generic internal-file referral omits the published topic's four readily stated requirements. No separate allegation is made that every generic site-planning caution is false.",
      "published_kind": "conditional_or_referential",
      "blind_kind": "explicit_standard",
      "municipality_slug": "fate-tx",
      "district_code": "IND",
      "topic": "setbacks",
      "decision": "confirmed_error",
      "original_assessment_status": "error",
      "original_error_class": "omission",
      "original_severity": "medium",
      "operative_quote": "Front: On Freeway, Freeway Frontage Road, or Arterial Roadway (min) 20; On All Other Streets (min) 20; Side: (min) 40; Rear: (min) 40.",
      "source_url": "https://www.fatetx.gov/DocumentCenter/View/4319/Article-III_Zoning-Districts_Final_20240701",
      "source_file": "sources/fate-tx/doc-4319.pdf",
      "source_pdf_pages": [
        27
      ],
      "source_sha256": "4b6da7d556edd57ef7d0acda1525c339398f8e2daa8df161a3f9034a50163ab2",
      "proposed_replacement": "IND minimum setbacks: **front 20 feet** on freeway, freeway frontage road, arterial roadway, and other streets; **side 40 feet**; **rear 40 feet**. Figure 3.3-8 lists no maximum front setback.",
      "proposed_citation": "Article III §3.3.5, Figure 3.3-8",
      "publication_changed": false
    },
    {
      "id": "d1fcb46704c4408353cba77065dd53688b1cbb63a03a56d552fa2193dadac399",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "fate-tx",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "7dddceb8ee2150db48ca423f708f7e7cd6151141da170e9074721616fca14591",
      "status": "error",
      "error_class": "omission",
      "severity": "medium",
      "evidence": "Stories (min): 2, except for single-family detached residential. Stories (max): 4 or 55'; 5+ with SUP.",
      "reason": "Visually inspected Fig.3.5-14. Published internal-file referral gives no operative height figures or exception although the table is readable. Preserve the table's literal or rather than inventing which limit controls.",
      "published_kind": "conditional_or_referential",
      "blind_kind": "explicit_standard",
      "municipality_slug": "fate-tx",
      "district_code": "OTC",
      "topic": "height",
      "decision": "confirmed_error",
      "original_assessment_status": "error",
      "original_error_class": "omission",
      "original_severity": "medium",
      "operative_quote": "Stories (min): 2, except for single-family detached residential. Stories (max): 4 or 55'; 5+ with SUP.",
      "source_url": "https://www.fatetx.gov/DocumentCenter/View/4319/Article-III_Zoning-Districts_Final_20240701",
      "source_file": "sources/fate-tx/doc-4319.pdf",
      "source_pdf_pages": [
        46
      ],
      "source_sha256": "4b6da7d556edd57ef7d0acda1525c339398f8e2daa8df161a3f9034a50163ab2",
      "proposed_replacement": "OTC height: **minimum 2 stories**, except single-family detached residential. The table lists **maximum 4 stories or 55 feet**, with **5 or more stories requiring an SUP**.",
      "proposed_citation": "Article III §3.5.7, Figure 3.5-14",
      "publication_changed": false
    },
    {
      "id": "703caee380ce69ce0811ee404b5932e37bbc7aa410e85d300faac3a036751876",
      "status": "error",
      "error_class": "citation",
      "severity": "low",
      "evidence": "The request for Planned Development District zoning is considered a zoning change ... Section 2.5 shall apply. ... Planned Developments shall be 10 acres minimum.",
      "reason": "Visually inspected §3.5.8(B). The 10-acre result is correct, but the published claim that it came from a dimensional table area cell is false; it is enumerated prose. Internal file paths are not useful public citations.",
      "published_kind": "conditional_or_referential",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "fate-tx",
      "district_code": "PD",
      "topic": "lot_size",
      "decision": "confirmed_error",
      "original_assessment_status": "error",
      "original_error_class": "citation",
      "original_severity": "low",
      "operative_quote": "The request for Planned Development District zoning is considered a zoning change ... Section 2.5 shall apply. ... Planned Developments shall be 10 acres minimum.",
      "source_url": "https://www.fatetx.gov/DocumentCenter/View/4319/Article-III_Zoning-Districts_Final_20240701",
      "source_file": "sources/fate-tx/doc-4319.pdf",
      "source_pdf_pages": [
        49
      ],
      "source_sha256": "4b6da7d556edd57ef7d0acda1525c339398f8e2daa8df161a3f9034a50163ab2",
      "proposed_replacement": "Planned Development requires the applicable concept-plan and zoning-change review procedures. A PD must be **at least 10 acres**; standards are set through the approved PD.",
      "proposed_citation": "Article III §§3.5.2(1), 3.5.8(B)(1); Article II §2.5",
      "publication_changed": false
    },
    {
      "id": "af5a5736ff2a3d2fb71a71ba43e2022cbb5fcbf7e95f6e79a212565233a57695",
      "status": "error",
      "error_class": "applicability",
      "severity": "medium",
      "evidence": "Maximum Lot Coverage for Two-Family/Duplex Homes - forty-five percent (45%) by main buildings and accessory buildings. Single-family lots and detached dwellings ... shall conform to ... SF-8.",
      "reason": "Read §§22.4.C,22.5.A and19.4.C. The 45% is not universal within2F; single-family follows40%. Reclassified from omission to applicability because a use-specific standard was applied to the whole district.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "forney-tx",
      "district_code": "2F",
      "topic": "lot_coverage",
      "decision": "confirmed_error",
      "original_assessment_status": "error",
      "original_error_class": "omission",
      "original_severity": "medium",
      "operative_quote": "Maximum Lot Coverage for Two-Family/Duplex Homes - forty-five percent (45%) by main buildings and accessory buildings. Single-family lots and detached dwellings ... shall conform to ... SF-8.",
      "source_url": "https://www.forneytx.gov/DocumentCenter/View/3790/Zoning-Ordinance-2026-2",
      "source_file": ".tmp/accuracy/source-bodies/forney-tx/ec0647f623730dd0.pdf",
      "source_pdf_pages": [
        63,
        74
      ],
      "source_sha256": "e64b5653af24dd76279b80906c4d5d624479ddc534a0aa296f831ff84ef9b497",
      "proposed_replacement": "For two-family/duplex homes in 2F, maximum lot coverage is **45 percent**, including main and accessory buildings (§22.4.C). Single-family lots and detached dwellings follow SF-8 standards (§22.5.A), including **40 percent** maximum coverage (§19.4.C).",
      "proposed_citation": "§§22.4.C, 22.5.A, 19.4.C",
      "publication_changed": false
    },
    {
      "id": "f0951aa27cd444e4b860b5f81232d3175f4b9a51c2d80e89a3981d1b6a2bba2b",
      "status": "error",
      "error_class": "omission",
      "severity": "medium",
      "evidence": "For existing structures/uses ... Any existing parking, or lack of same ... shall be considered a conforming parking arrangement. ... For new structures and uses - as required in the base zoning district. ... Open storage is prohibited in the CBT district.",
      "reason": "Read complete operative parking clauses, site-plan requirements and open-storage prohibition. Published all-parking base-district claim conflicts with express existing-structure protection. Architecture-only characterization also omits operational conditions.",
      "published_kind": "conditional_or_referential",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "forney-tx",
      "district_code": "CBT",
      "topic": "special_land_uses",
      "decision": "confirmed_error",
      "original_assessment_status": "error",
      "original_error_class": "omission",
      "original_severity": "medium",
      "operative_quote": "For existing structures/uses ... Any existing parking, or lack of same ... shall be considered a conforming parking arrangement. ... For new structures and uses - as required in the base zoning district. ... Open storage is prohibited in the CBT district.",
      "source_url": "https://www.forneytx.gov/DocumentCenter/View/3790/Zoning-Ordinance-2026-2",
      "source_file": ".tmp/accuracy/source-bodies/forney-tx/ec0647f623730dd0.pdf",
      "source_pdf_pages": [
        125,
        126,
        128
      ],
      "source_sha256": "e64b5653af24dd76279b80906c4d5d624479ddc534a0aa296f831ff84ef9b497",
      "proposed_replacement": "CBT generally carries the base district's permitted/conditional uses and dimensional standards. Existing structures and uses have protected existing parking arrangements under §34c.4.E(1); additions, significant use expansion and reconstruction have stated conditions. New structures and uses follow base-district parking. Open storage is prohibited. Site redevelopment/new structures require approved site plans, and applicable work requires facade approval; development standards are established on the approved site plan.",
      "proposed_citation": "§§34c.2, 34c.4.E, 34c.5",
      "publication_changed": false
    },
    {
      "id": "bff3fa8eea6fd1e6058707b28f2fd5f8c088adc202548e6180221a4a104282b8",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "§29.3.A (p.96): \"1. Seventy feet (70'). Any structure above thirty-six feet (36') in height shall require a Conditional Use Permit (CUP)... 2. One (1) story for accessory buildings. 3. Other (Section 43.4).\"",
      "reason": "The 70 ft maximum, the CUP requirement above 36 ft, the 1-story accessory limit, and the Sec. 29.3 citation all match the source. The blind reading agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "forney-tx"
    },
    {
      "id": "26f4c82d9deff46128b6e2b81429ba5bdb46a770a3daf2605d9a591d3dfd1b1d",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "§34e.2 (p.131): HOZ standards \"shall supersede the regulations of an approved standard zoning district where such district's regulations are in conflict... All regulations of the underlying Base Zoning District classification shall be in effect, except as identified in the HOZ District regulations\". §34e.1.C (p.131): \"Property that is a part of the original HOZ District, as shown on Exhibit A, may not be removed from the HOZ District overlay area. In addition, once any property is added to and included in the HOZ District overlay area it may not later be removed\".",
      "reason": "Both assertions are directly supported: HOZ controls where it conflicts with the base district, and property cannot be removed, whether original or later-added. The Sec. 34e citation covers both subsections. The blind extractor focused on §34e.3.E use reliance, which is consistent with the published rule rather than contrary to it.",
      "published_kind": "conditional_or_referential",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "forney-tx"
    },
    {
      "id": "531702964cc749fd8ee278b50803e661291b9e3508ac3399a17b7a06a95f9273",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "§33.4.C (p.113): \"Maximum Lot Coverage – Sixty percent (60%) including main and accessory buildings; maximum ninety percent (90%) impervious coverage\". §33.4.D: \"Maximum Floor-Area-Ratio (FAR) – Two to one (2:1)\". §33.5.E: \"Open storage is limited to a maximum of twenty percent (20%) of the total lot area... and must be screened\".",
      "reason": "All figures (60% coverage, 90% impervious, 2:1 FAR, 20% open storage with screening) and all citations match the source. The blind reading agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "forney-tx"
    },
    {
      "id": "88650b5e637f1f74df2573e95d75ec0ca33e29083dd85eba851bac690b7fe835",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "§24.4.D (p.81): \"Maximum Lot Coverage: Forty-five percent (45%) total, including main and accessory buildings\".",
      "reason": "The published rule matches the operative text and citation exactly. The blind reading agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "forney-tx"
    },
    {
      "id": "fb8ce7b7ff754c43e9651e107e1f7f0390aae5862f316a6db5f44337f0ae6c0b",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "§32.3.A (p.109): \"1. Seventy feet (70'). Any structure above thirty-six feet (36') in height shall require a Conditional Use Permit (CUP)... 2. One (1) story for accessory buildings. 3. Other (Section 43.4).\"",
      "reason": "The 70 ft maximum, the CUP requirement above 36 ft, the 1-story accessory limit, and the Sec. 32.3 citation all match the source. The blind reading agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "forney-tx"
    },
    {
      "id": "e239083173faf9c6619ce6f9671540daa65ca9c73c4d4e10eb34e9a7e924a816",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "§17.3.A.1 (p.56): \"Two and one-half (2.5) stories, and not to exceed thirty-six feet (36'), for the main building/house.\"",
      "reason": "The published rule matches the source exactly and cites the correct section. The blind reading agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "forney-tx"
    },
    {
      "id": "5253534fe8f79c7b7a30ab6792b6f09cc94c8f3c4f09b5e907ea4ebe7bea9e36",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "forney-tx",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "f8d1e741d0b15d010aa5523bf8c695b15826f8f70a447e1c651649bac79c9a06",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "franklin-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "36d6411cb73065897f734cdeef5f604fd910b253904cc66b00184149bdf2d680",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "franklin-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "d7313fcd8c66d36501b71d2d463e82e92aef92c87fe60daa804b7bfe35938450",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "franklin-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "a7af8cb088882185e5d9a3ab3b044105611c3f2cd4806dadf9959995c2e07e00",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "franklin-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "8de9cd65bf5190626102efd4892934571aa13367d94cde1c3ea3d08d6ece50e5",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "franklin-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "c6afa94edb837f5a25bb125e69be249785cfeff63deb7435aad63b7a3ff3eba7",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "franklin-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "d797b19b6d7c8fe89eb327b4660331a7a9799825c7577bd6b8dfd8c2a1012917",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "franklin-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "2708784a4dad23654686bcb030d238bceaf90e483fb51042bffd541af2711dcc",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "franklin-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "310a1ee8a2a5441887724f54da74189f978a3e94006439f67ed17999f1a067d6",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "franklin-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "841e9436aa799d22d0c3b6d7ffea2680334a493daa093a836a686782ca039e40",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "franklin-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "f05585fb110d01339814beb06477223e0bf542a01cad70f5e85e535cef040153",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "franklin-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "c280d791868f25b9edac57dcef74244919a3c39f308790aeb6953412e659ae80",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "frisco-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "2a88432a7c4ec81047dd3194947732b99cdbc8e0125c6102fdc9c3af1ed73db9",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "frisco-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "02541bd3e5ffce2e24a7ceed537aa42292c0cf3ea6ded30c963f833cb445973b",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "frisco-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "01a3627bf8ef291c082ea82452b75c1ba15b45b5266639d18fe0804b81215c02",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "frisco-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "2013f7a800b37ea075d32dbf3840c2dbe3653ecd3961e72b8b3d09cc633497dc",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "frisco-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "5634b177ccbbd10d12a61602d658e4a763cf10bc7d46db3bfcfbfbbb273f47bd",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "frisco-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "a337a818cbf01197902d4a7d447bb8e01536de5eb682e1a564979e3a98f26402",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "fuquay-varina-nc",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "82d6927cd5f71bcec2403fe71fc0651233c664064e9a0e129e98bbcbab50a1f4",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "fuquay-varina-nc",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "4e57711eb833d830be8d7a527383fef0744bbbe12ebc34ea8c4c135b492c8e0f",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Provided previous ordinance is now limited to EPD; current-code applicability has not been independently established.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "gallatin-tn",
      "unassessed_reason": "superseded_source_applicability"
    },
    {
      "id": "ac7d85057dae8e0125dbc910d3652994d908f5a10755e7f529e4b1824187a20b",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Provided previous ordinance is now limited to EPD; current-code applicability has not been independently established.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "gallatin-tn",
      "unassessed_reason": "superseded_source_applicability"
    },
    {
      "id": "71bafd5fb27ea831a4ff2db67e2388bd1ff309127e7cf6db82660f20556035b7",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Provided previous ordinance is now limited to EPD; current-code applicability has not been independently established.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "gallatin-tn",
      "unassessed_reason": "superseded_source_applicability"
    },
    {
      "id": "704e7a2150cbb91b9b49e3138895e9b08f5722935d359180ffee3e884ceaaec0",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Provided previous ordinance is now limited to EPD; current-code applicability has not been independently established.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "gallatin-tn",
      "unassessed_reason": "superseded_source_applicability"
    },
    {
      "id": "fa9762e99d1bb6511c85b89ead8633cb0b5d6a9391f3f3adb216e4314679b4f9",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Provided previous ordinance is now limited to EPD; current-code applicability has not been independently established.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "gallatin-tn",
      "unassessed_reason": "superseded_source_applicability"
    },
    {
      "id": "0bfbc4d80a63a19948c63e2b18d3b7f4fb961dc0b128627755810c74635c7541",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Provided previous ordinance is now limited to EPD; current-code applicability has not been independently established.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "gallatin-tn",
      "unassessed_reason": "superseded_source_applicability"
    },
    {
      "id": "7bfa1b92ce3875f97deb9b22603eba6df74741e6530432693fb4797508e45f10",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Provided previous ordinance is now limited to EPD; current-code applicability has not been independently established.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "gallatin-tn",
      "unassessed_reason": "superseded_source_applicability"
    },
    {
      "id": "8cbcd57009d1c0b697ef261f6bce60f7a42e05100a96d43c4a389c72acfb4c38",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Provided previous ordinance is now limited to EPD; current-code applicability has not been independently established.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "gallatin-tn",
      "unassessed_reason": "superseded_source_applicability"
    },
    {
      "id": "47e3a0eb381c5c14f7b8791588056c3a257baa22c3839d6aae57f69a7a8e913c",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Provided previous ordinance is now limited to EPD; current-code applicability has not been independently established.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "gallatin-tn",
      "unassessed_reason": "superseded_source_applicability"
    },
    {
      "id": "c47025e85a7b27f5aa1888697029ef578afe5b61eae4606d5c21bad2f07b4308",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Provided previous ordinance is now limited to EPD; current-code applicability has not been independently established.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "gallatin-tn",
      "unassessed_reason": "superseded_source_applicability"
    },
    {
      "id": "eff516d0a2e62019ebed337c00af5a6b8a4cceee66c5db17d0361ec048bdf5e7",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "georgetown-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "71cc7b9c34969d503d7b533b49d39819872ecd697966e15cc7bd52a86e06d0f9",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "georgetown-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "df9d0ba2cb7b33e536c91da7cb958c1fe848f2adc4a678de6700e3bdc62f0c22",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "georgetown-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "9c76d78f31041f8a090b8b2f502a643fde4c0c148f6b961375d1303bcc2c251a",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "georgetown-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "fe7004e2537db2d66e166388a47730cb94a03148117429f4d9bbc80a22875b94",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "georgetown-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "c43e68e8552c6006db4b4b59a6a5898c3f7ec783c068ae602983b11abb246dbe",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "georgetown-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "378c8ba8c91815644f10cf3540af760702a21c1786bf7269efe90c4c1b29d4f4",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "georgetown-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "28806f39272770f09a2a2290a9d1478633cc1764d7bb170f56573e76a5cbb2fb",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "georgetown-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "6162ad03ddb085af87419d84f2bb96ced6a0190044afe07de50b384416d895f9",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "georgetown-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "636ad53a1082e1a840637b66c2e2defd3a96b988f7bfbc1965379a31dfe9be34",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "georgetown-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "faf24758f9df278d3b0bca5c40350bc95724050390099fcd6a1a834a3e308646",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "goodyear-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "097b96ffcf765525393c1629206055c41143069275c3cfd39015a488bb653abb",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "goodyear-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "4e80f1300e2bd2e0e0a8b22c10209bac8d0d019c52820711fd2ed848f0a29691",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "goodyear-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "d678622e55bb428304370d7f7485c2b70d7f87a9cc8b02f05e27509c27c6389b",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "goodyear-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "8a9073aa95b6e6fcf90ab22e4ae2a24fd7da278baa712e3fce6c1a1c3a4fa54e",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "goodyear-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "05e4a531d7254d566b048458f0513f513da3281d091d004c4b3f2cc30e299dd5",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "ER cells: front40; side street35; side20; rear35. Footnotes2,3,5,6 attach to other cells, not ER.",
      "reason": "Visually inspected ER column and note markers. All four published base values match. The generic sentence says table notes can modify listed conditions; it does not actually assign a different ER value or affirm those notes attach to ER. Ambiguous boilerplate merits clarification, but an inferred application is insufficient for a confirmed factual error.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "hendersonville-tn",
      "district_code": "ER",
      "topic": "setbacks",
      "decision": "false_positive",
      "original_assessment_status": "error",
      "original_error_class": "applicability",
      "original_severity": "low",
      "operative_quote": "ER cells: front40; side street35; side20; rear35. Footnotes2,3,5,6 attach to other cells, not ER.",
      "source_url": "https://www.hvilletn.org/DocumentCenter/View/439/2025-Zoning-Ordinance-2025-19-PDF",
      "source_file": ".tmp/accuracy/source-bodies/hendersonville-tn/7a329742bb4abdce.pdf",
      "source_pdf_pages": [
        87,
        88
      ],
      "source_sha256": "88e06cf9b3c31823b8fa3f73b81238eed1504bfd00f214c1c51730dbc291c9fb",
      "proposed_replacement": "Optional clarity edit: Base yards in ER: front **40 feet**, side-street **35 feet**, side **20 feet**, rear **35 feet** (Chapter6.3,Table4). Do not import footnotes attached only to other districts.",
      "proposed_citation": "Chapter6.3,Table4",
      "publication_changed": false
    },
    {
      "id": "04d6c0a62074f782d4b8c5096ab78e8c3771c6184c73af146b2862c1a00527c7",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "hendersonville-tn",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "e4a9a91d0100872dba28788f205b4bf20f2454cebc20b55a547bf684e3731f5f",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "hendersonville-tn",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "dfadad1d82f8141ff28b80a339420aacdf958aea416698d7d2ea823db85d983f",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Table 2.2.2-A, CB column (Sec. 2.2.2, p. 2-9): 'Front Setback (minimum) 30'; 'Front Setback (maximum) n/a'; 'Side - Corner Setback (minimum) 30'; 'All other setbacks (Side and Rear) (N9) 5'; 'Setback to Adjacent RR/SR/NR Districts (minimum) 50'. Thoroughfare Setbacks: 'Freeway - NC 540/US 1 100'; 'Freeway - NC 55 50'; 'Thoroughfare 25'.",
      "reason": "Every published number and the citation match the CB column of Table 2.2.2-A. The blind extraction adds qualifications: N9 common-wall attached units, §2.3.5 outlot 0-ft setbacks, and future right-of-way measurement under §2.3.3.D. None of them contradicts the published values. N9 has no practical effect in CB because Table 3.2-A lists attached dwellings as '--' in CB, so leaving it out is not a material omission.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "holly-springs-nc"
    },
    {
      "id": "6d26e320ceb69178924d764fd70aba48423fd5f1c6d10b417ec2bd868ef196c2",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Table 3.2-A (pp. 3-3 to 3-6), column order RR SR NR NCR MXR NMX DMX RMX CB SP IVMX BRT HI. Apartment Dwelling '-- -- -- CD PS PS PS ...' gives DMX = PS. Hotel '-- -- -- -- -- CD P ...' gives DMX = P. Retail Uses '-- -- CD CD P P P ...' gives DMX = P. Food/Restaurant '-- -- CD CD CD P P ...' gives DMX = P. Office Use and Personal Services both give DMX = P. Attached Dwelling Duplex/Triplex/Quadruplex/Townhome '-- -- CD PS PS CD CD ...' gives DMX = CD. Detached Dwelling 'P P P P P CD -- ...' gives DMX = --. §3.1.1 defines PS, CD and '—'.",
      "reason": "Each cell the publication cites reads correctly for DMX. 'Most office/personal service uses' is accurate: Business Services, Medical Office, Office, Personal Services and Veterinary are P, while Self-Service Laundry and Mortuary are '--'. Labelling apartments 'PS' correctly signals the §3.3.2.A.2 upper-story requirement without misstating it. The blind extraction agrees on every cited cell.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "holly-springs-nc"
    },
    {
      "id": "a3c926596f6e602c3de21357356303a2f9387fda14eaee5f5c57d6de1e1f22e5",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Table 2.2.3-A, HI column (p. 2-13): 'All Building/Structure(s) N9'; '(maximum with Conditional Zoning District (CD)) N9'. Note N9: 'Maximum Building Height shall be established with a Conditional Zoning District (CD).' §2.1.3 (p. 2-5): 'Heavy Industrial Districts may only be established or expanded using the Conditional Zoning District (CD) process.'",
      "reason": "The publication says HI height is set by the CD that creates the district and that the table gives no fixed maximum. That matches N9 and §2.1.3 exactly, and the blind extraction agrees.",
      "published_kind": "conditional_or_referential",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "holly-springs-nc"
    },
    {
      "id": "3c8d9c7af20da296f5026349f7c867dafeb92dd2315837fc9fc7c3ce9c7d113f",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "NMX Minimum Development Area (acres) (N1):0. N1:Applicable to sites that are greater than5acres.",
      "reason": "Visually inspected table and N1. Published no minimum below5acres is true because the row applies only above5acres. The source also gives zero above5acres. The assessor inferred an unstated positive requirement above5; the product never states one. Incomplete clarity is not a proven false requirement.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "holly-springs-nc",
      "district_code": "NMX",
      "topic": "lot_size",
      "decision": "false_positive",
      "original_assessment_status": "error",
      "original_error_class": "transcription",
      "original_severity": "low",
      "operative_quote": "NMX Minimum Development Area (acres) (N1):0. N1:Applicable to sites that are greater than5acres.",
      "source_url": "https://www.hollyspringsnc.gov/DocumentCenter/View/37679/Section-2-Districts",
      "source_file": ".tmp/accuracy/source-bodies/holly-springs-nc/159408aec3190b53.pdf",
      "source_pdf_pages": [
        9,
        10
      ],
      "source_sha256": "6363914822ebfda13aa2d0e2e97a1b7b583aa88f1c78e6a51ee5a03d2be31bdd",
      "proposed_replacement": "Optional clarity edit: NMX minimum development area is **0 acres** in Table2.2.2-A; NoteN1 applies that row to sites greater than5acres. Retain the separately correct frontage and floor-area figures.",
      "proposed_citation": "Table2.2.2-A andNoteN1",
      "publication_changed": false
    },
    {
      "id": "1e222802f21bbf23e5f823d1291e10675f204db6289f8d99b1665e1b50da31e3",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Table 2.2.1-A, SR column (Sec. 2.2.1, p. 2-8): 'Primary Building(s) (maximum) 35'; 'Primary Building(s) (maximum with Conditional Zoning District (CD)) 50'; 'Accessory Building/Structure(s) (maximum) (N14) 25'. N14: 'Accessory Buildings/Structures shall not exceed the height of the primary Building on the Lot/property.'",
      "reason": "All published values, the N14 limit and the citation match the source, and the blind extraction agrees. The 50-ft figure is correctly presented as conditional on a CD.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "holly-springs-nc"
    },
    {
      "id": "836956de7f75c82d9d1b8ef7792f29b7227da76c3d9ef0888b48dd76aee0bfb1",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "File 4c2ac16fbbee04ef.pdf (TA 22-16), p.1, Sec. 3.2.4 NR. Intent: 'The intensity to which permitted uses may be built is regulated by the building type which corresponds to the use.' Sec. 3.2.4(a), 'Uses permitted by right': 'bed and breakfast inns; boarding or rooming houses for up to four roomers; congregate housing designed within the \"civic\" building type; family care home; multi-family homes; single family homes'. 'Uses permitted with conditions': 'cemeteries, (9.7); religious institutions, (9.8); commercial use in a mixed-use building¹, located on an arterial or at the intersection of a local street and a larger capacity street; commercial use, in a detached house building type, located within ¼ mile of a Town Center district and fronting a major or minor thoroughfare ... (9.51); essential services 1 and 2, (9.14); government buildings up to 5000 sq. ft. of gross floor area; neighborhood and outdoor recreation, (9.21); parks, (9.29); retirement communities (9.50); schools, (9.35); transit-oriented parking lots as a principal use, (9.49); transit shelters, (9.39); multi-family homes (9.64)'. pp.5-6, Art. 9.64.1 sets one-building/one-lot buffer standards; 9.64.2 treats two or more MF homes on one lot as a major subdivision. p.6: 'TOWN BOARD DECISION: March 20, 2023'. TA22-07 (f031ec715b640fa3.pdf) title confirms that Article 4 covers Lot & Building Types.",
      "reason": "Every by-right use and every conditional use, with its Art. 9 cross-reference, matches the TA 22-16 text of Sec. 3.2.4(a). This includes the 4-roomer cap, the civic building type limit on congregate housing, the 5,000 sq. ft. government building cap, and the locational limits on commercial uses. The building-type intensity statement matches the district intent. The citation and the March 20, 2023 adoption date are correct. The published label for the 9.64 listing, 'one-building-one-lot buffer standard', is narrow, because 9.64 also includes the .2 major-subdivision rule. However, the publication still cites 9.64 correctly and accurately describes its principal one-lot provision, so this is non-material. The blind extractor raised a concern that by-right 'multi-family homes' might have been struck, since the strikethrough formatting was lost in extraction. The provided text shows it listed by right, and nothing in the source shows it removed. The publication agrees with the source text as provided. The blind extractor's narrower residential-only scope accounts for its shorter conditional list; that is not a disagreement on substance.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "huntersville-nc"
    },
    {
      "id": "0d69123b14ccaa0701dd1510740d9f374f64c473035e5dd5010400630248d47b",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "hutto-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "9e4f216127707ae294658ece316be462d9cd92797a9834cd118eb9745a242f59",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "hutto-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "d8bd10eb86adbf143a8ada75168589cb56341bce1155d1c99d58c16edded24f4",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "hutto-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "b76bf13b7318ffb35c99423a7bae51bd63abec381fbf1408b332225c144b5e10",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "hutto-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "325a400cd882c7305d0c9fc992c6ead171d0ada5be68de8104c1dd1029451003",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "hutto-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "d8113269f8f0e72ab649f877876e0215fb1b19f365ddbc0e7ace14f14d1e7bec",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "hutto-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "1291e78e7159743bffc165348377979e1b651be9ea8844176d0a76866d33cb83",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "indian-trail-nc",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "d95e5e99374e7fe653a0f53cb5d845847fe0b35f8e1da1e0ff570c02d123d946",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "indian-trail-nc",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "13356ce3485b20fb76af507269de47c4c9396c231c0ab22bd2f9fee8d36bbc92",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Table 500-5, p.1: 'Table 500-5: Table of Permitted Uses. The following use table identifies uses authorized or prohibited within the zoning districts and overlays identified in DIVISION 500. ... P = Permitted Use; C = Conditional Zoning; and \"--\" = Prohibited Use/Not Permitted.' SF-1 is a column in the 'Residential Districts' header on every page, pp.1-11.",
      "reason": "The publication's material assertions match the primary source verbatim. It says SF-1 permitted uses are controlled by Table 500-5, and it gives the code legend P = permitted by right, C = conditional zoning, '--' = prohibited. The publication declines to state individual cells and defers to review; it does not claim the standard is unavailable, so it is unresolved rather than an omission. The 'Ch. 570' co-citation and the snapshot filenames cannot be confirmed from this excerpt, but they are non-material because the controlling Table 500-5 citation is correct. The blind extraction's cell-level answer (e.g., p.1 Single-Family Detached P in SF-1; Single-Family Manufactured Home C in SF-1) is consistent with the table but goes beyond what the publication asserts, so the two do not disagree on any published claim.",
      "published_kind": "unresolved",
      "blind_kind": "explicit_standard",
      "municipality_slug": "indian-trail-nc"
    },
    {
      "id": "3218c4ddc91309e98f8e616779c8ccc62fc3decd4765c74a7ce444fa4eb77fc1",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "kyle-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "f1bc312327bbb4dbe008bd47ec35d6637f26857b0cfb665c15a994817c48e32a",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "kyle-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "dddbaaf9315d9d23dd7615ed850f006ae74455893dc489da3830d0ce6d4c942c",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "kyle-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "4bc05d7472cd0b4236c69518dd1e90943e36a6ff3dee2ee27b73d423d2b202e5",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "kyle-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "ee3075d528a748b4cd6cbea044a6cc04d5292cd78142c387a1799b6eb528aefb",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "kyle-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "abddf1f2bc1065ad1b1d7345b4063a0a385832e1e339f9dd4668d26a9ca9acc5",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "kyle-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "67d3d944c3e16b4ba57d4dbf3dd7d7b9e27e0d9a7cfca684597164a2bee43fbd",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "kyle-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "ba02c21c27e97e82c11caa1d813c6572e1dfae43be304df7df88bc48566bd1ed",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "kyle-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "37995d6652e3164b3cd10474c44a965a1cff12d2c02083710e0c18cf894dec06",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "leander-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "d8d3bc9aa35b0c218a3dbc596a426f0f7b15950b0712f4fd937123133d04d7dc",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "leander-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "af332d375f6226acc62d6c1322bec60d93b9825a4ec7e1a538d16ead063231a6",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "lebanon-tn",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "ea2a793dcc354ea655783cceec93f69240190c7fcf5fe6c3572e57e1104ab234",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "lebanon-tn",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "7c5c35ef636329471bd7808ecb912221ea22e2e215e8f57bf39e59f86fd3a8c8",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "CI – Interchange Commercial §4 Land Uses (3cc2212994d9d2c9.pdf pp.1-2).\n- Permitted: Animal Care, Shelter and Veterinarian Services; Construction Sales and Services; Financial, Consultative, and Administrative Services; Food and Beverage Services; Food Service Drive-In, Drive-Thru, and Take-Out; General Retail Trade; Hotel and Motel; Major/Minor Entertainment Services.\n- Conditional: Automotive Repair and Cleaning; Automotive Servicing; Building Materials and Farm Equipment; Check Cashing Services; Vehicular, Craft, and Related Equipment Sales.\n- Prohibited: Car washes; Specialty Smoke and Vape Shops.\n- Footnote: '*Single-family residential permitted as an accessory use or on an existing lot of record on June 6, 2023.'",
      "reason": "Every permitted, conditional and prohibited category and the single-family qualification match the source. The section number 14.305 is not printed in the excerpt, but nothing contradicts it.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "lebanon-tn"
    },
    {
      "id": "ad293856f06997ed6d2e69c27ad745df165bb115275198611beebda89d2d2d3d",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "lebanon-tn",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "00030b651aabb23dac4207807bc674e2dec64663f3a1193b5499d74891a05514",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "lebanon-tn",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "174aa12f613e108953a4d73669774748688949a24ae044ad235460dd5cd98482",
      "status": "error",
      "error_class": "omission",
      "severity": "medium",
      "evidence": "Mobile home stands shall not occupy an area in excess of twenty-five (25) percent of the respective lot area. The total area occupied by the mobile home and its accessory structures shall not exceed fifty (50) percent of the respective space area.",
      "reason": "Read RMH§13 park-specific standards. First clause is narrowly about the lot-development table, but the following assertion that bulk is controlled through other means instead omits explicit coverage caps for a central allowed use. Preserve park applicability rather than impose these caps on allRMHdevelopment.",
      "published_kind": "no_standard",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "lebanon-tn",
      "district_code": "RMH",
      "topic": "lot_coverage",
      "decision": "confirmed_error",
      "original_assessment_status": "error",
      "original_error_class": "omission",
      "original_severity": "medium",
      "operative_quote": "Mobile home stands shall not occupy an area in excess of twenty-five (25) percent of the respective lot area. The total area occupied by the mobile home and its accessory structures shall not exceed fifty (50) percent of the respective space area.",
      "source_url": "https://www.lebanontn.org/DocumentCenter/View/6419",
      "source_file": ".tmp/accuracy/source-bodies/lebanon-tn/6f2e3a71e7e71c85.pdf",
      "source_pdf_pages": [
        17
      ],
      "source_sha256": "17473dbeb455a77c0df193a7303674959ac16e9ef3aa7609685cfdf0df2c6cc0",
      "proposed_replacement": "The general RMH lot-development table does not list a districtwide coverage cap. **Mobile-home parks have specific caps:** mobile-home stands may occupy no more than **25 percent** of their respective lot area, and a mobile home plus accessory structures may occupy no more than **50 percent** of the respective space area (§13,SpacingofMobileHomesandSiteCoverage).",
      "proposed_citation": "§14.303RMH,§13,SpacingofMobileHomesandSiteCoverage",
      "publication_changed": false
    },
    {
      "id": "ae5b71a762071fc1ff4ad13acefeda36c514b244fab4eca1a408f88a4268b751",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "RMH §5 Lot Development Standards (6f2e3a71e7e71c85.pdf p.2): 'First dwelling 6,000 sf / Additional dwelling 1,500 sf / Lot width (min) a 50 ft / Lot depth (min) b 100 ft'. Notes: '(a) 18 ft minimum lot width for Dwelling, Townhome use. (b) 75 ft minimum lot depth for Dwelling, Townhome use.'",
      "reason": "All published figures and the townhome qualifications match the source. The residential-court and mobile-home-park supplemental minimums are separate use-specific standards, not errors in the general rule.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "lebanon-tn"
    },
    {
      "id": "afb0f4420c6e54623988ae62c00fd429d2beaf29cb0991b995a479c66f830851",
      "status": "error",
      "error_class": "transcription",
      "severity": "medium",
      "evidence": "the total area of residential parcels cannot exceed85%of the total area of all development parcels in each polygon of this zoning district.",
      "reason": "Read RPI§4. Published denominator is all polygon land rather than development parcels. This can overstate residential allocation if public rights-of-way or other excluded land are in the polygon; medium severity rather than purely cosmetic low.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "lebanon-tn",
      "district_code": "RPI",
      "topic": "permitted_uses",
      "decision": "confirmed_error",
      "original_assessment_status": "error",
      "original_error_class": "transcription",
      "original_severity": "low",
      "operative_quote": "the total area of residential parcels cannot exceed85%of the total area of all development parcels in each polygon of this zoning district.",
      "source_url": "https://www.lebanontn.org/DocumentCenter/View/6391",
      "source_file": ".tmp/accuracy/source-bodies/lebanon-tn/3ddfc9670170cdbf.pdf",
      "source_pdf_pages": [
        1
      ],
      "source_sha256": "9b76caced6a3fced50dd16fc91f769a0961d322f0f8f5456af18528e230f83d9",
      "proposed_replacement": "Retain the verified use list and qualifications. Replace the85%sentence with: Residential parcels cannot exceed **85 percent of the total area of all development parcels in each RPI polygon**.",
      "proposed_citation": "RPI§4LandUses",
      "publication_changed": false
    },
    {
      "id": "5931db5452f86bf9c4ac2b4f0217006fdd0d8decb2f7d406e649dc8bd5549351",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "lebanon-tn",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "bc2e5fe30ba8d160c2a3c9a836a8d80fec37a7f81b493c3f87ff877a9fe60eea",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "RXH §6 General Building Development Standards (90b6751439efe494.pdf p.3): 'Primary building height, stories (max) 3 … Primary building height, feet (max) 45 … Accessory building height, stories (max) 2'.",
      "reason": "The published 3 stories / 45 ft primary and 2-story accessory limits match the district table. The residential-court cap (§14.a.v, 2 stories / 35 ft) and the transition rules (§10.b, §12.b) are use- or context-specific exceptions to the general rule. They do not make the published general statement false.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "lebanon-tn"
    },
    {
      "id": "a3cd4b3fd42d562e45e353e549a2e7142695d841953228d6f0efc0e034af4c55",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "little-elm-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "b9801645260b27d255a523cc7e8774f12b157eb56fe8570e45a677c14c929d82",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "little-elm-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "5828f23aba19c01a124fc610a0cbd3f048a7e1d38ec0645f2452f85e5e6b7647",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "little-elm-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "d8681d7477c1e901208e9464046dc7f5e213ec25a14d2def356ac866d68df3b4",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "little-elm-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "14459f095bcf0b16dffe1240cd02db39d77ccbd8832f97283999b45d9100b0df",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "little-elm-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "f58a2e70e8d6f6df4b3ef073fb16aaa5746bc9e0ba79f85b98795c2f199b4844",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "little-elm-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "c253f3231b0eb013d35186d67d42cde134f3faaff15ebf49308d9dac55b80576",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "macomb-township",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "da231fe86d0e4af481a3e192fa821c2e888a0339bb1e7f5ebf022cb450d22ced",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "macomb-township",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "20d56e9603590295e6c05f671bf1ebe43cac3c74fb41684edb993fe4be94639e",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "macomb-township",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "f75862c4c7539e48a1b04a72ed2dbddb5a395899f1e6c01f8d5a3119aab28c91",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "macomb-township",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "8967a275368aa705314129a566a77e320ba0085bd141a13e629df2a6b3614e70",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "macomb-township",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "92be410260b09ca52f29a77bf62d39e730f3f9f69f412bffa5d5b6faa4b02f07",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "maricopa-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "98ac499c538b276168b35ee47b3bdda058f8f3433a38142f74355cad8a7297be",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "maricopa-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "a3ee666b0fb38741b6fca4ef160b691d8540be7bd4fd85c2ff7c8fc2cb79eb09",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "maricopa-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "b1781b593155ce11be66b04107cad1a4b49715bb2dd9111e18ea73f033dbd0c7",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "maricopa-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "fac93b9e918a719162883032d7e31d55699666e2242f61bcc4794f1c5acadec6",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "mckinney-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "6150b2003859e3357701a827ae101ff3d774df7c08c534e0f1002741c3f795a2",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "mckinney-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "5134e4845b940bf78b286f273a5a48fe442cd67be18051a2df7c319e961c337b",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "melissa-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "9d4ffa420341344fdf225bb5b2d6ff25d151b7b3373f75a6ec6e11fbb6d418f9",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "melissa-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "b0d940a5ca53cc2ea9870c802a184a53478012250b3d2525fe5ef0864cd177b4",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "melissa-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "4c773ec3bf0a117d54a4d4f9c930f0aae1f76d70ef4e2b6dd9113b870d5ce166",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "miramar-fl",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "55783a37341998935bc4d9ff0199e623229be44d5f95f99ee23238a151ca4e17",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "miramar-fl",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "c625f5702cd62128b328cd8881ba108369b49bf9e845795156e50a8fe9e17c57",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "miramar-fl",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "46ffeefbe3ef9d51710fd06025b3e6a66c1da6bc500e78d98d68fd763678a81c",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "miramar-fl",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "8986fda260bc01bb7dbcc174aa25cc723353ef64567b0ed8c664d458f78c71be",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "miramar-fl",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "cfb6b4e4bf59378038c16924034e5717b7cfdd18127fff7d64103b1eda67b71a",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "miramar-fl",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "d3964c94e46bf5dc200c46d2a2a49f5bdb4be6fd9259cfb2175983e7bb86c82a",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "miramar-fl",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "fb6d4ef9d93de86d7c586133ae8b849fa1c9c7d86432bc30bb5a9dfa7cae24a4",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "miramar-fl",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "7925528761f1f8eb51b26e89ccd89c94736650fbe613a3853db04f19006c575c",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Table of Contents, Ch. 3 (pp. iii-iv) and §§3.2-3.3 (pp.121-156): the base districts are RC, RLS, RLI, RG, HMV, TN, TD, DE, CM, CC, HLI and IN. There is no 'CU' heading. §3.4.2 (p.157): conditional districts are shown by a 'C' initial, 'for example, C-CC'. §1.9.5 (p.12): 'Lands subject to a Special Use Permit (formerly called Conditional Use Permits), whether associated with a conditional use zoning classification or otherwise... shall continue to be subject to the Special Use Permit.' Table 1-1 (p.13): 'Conditional zoning districts approved under the prior zoning ordinance shall continue in effect.'",
      "reason": "The source supports the published assertion that CU is not a current Chapter 3 base district. The UDO's own transitional provisions (§1.9.5, Table 1-1) show that legacy conditional-use and conditional zoning classifications persist under their prior approvals, which is consistent with treating CU as a legacy or map-specific code and confirming before applying base standards. The GIS-layer premise cannot be verified from the UDO, but nothing in the UDO contradicts it. The blind extractor's reading of CU as the current conditional-district category is one plausible interpretation, but the code's meaning is not defined in the UDO. The publication's decision not to resolve it is therefore not an omission of an explicit standard.",
      "published_kind": "unresolved",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "mooresville-nc"
    },
    {
      "id": "8a7f910704b52abc71583ce56e66a9f3c9f921eb14f271ed897b55118037af93",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "mooresville-nc",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "6a33059c7819586455a4243b4ffab263bfd9b42b484877aecd58944fa6f7e7d4",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "§3.5.2.D, Table 3-15 (p.160): 'Front setback, min / Side setback, min / Rear setback, min — As established for the planned development in the PD Plan and PD Agreement in accordance with the requirements in this chapter.' §3.5.2.E.1.iv (p.161): the PD Plan shall identify 'The dimensional standards that apply in the planned development district.'",
      "reason": "The published front, side and rear setbacks match Table 3-15 exactly. The citation to Sec. 3.5 and Table 3-15 is correct. The publication properly treats PD setbacks as set by the instrument rather than fixed. The blind extraction agrees.",
      "published_kind": "conditional_or_referential",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "mooresville-nc"
    },
    {
      "id": "fb78308957a9145b0f04a226a4e25cfe0119c392ca292b3d6d64c5e7d1f5bcb9",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "§3.2.4.D, Table 3-5 (p.127), RLI All Uses: 'Lot area, min 10,000 sf'; 'A Lot width at right-of-way, min (ft) 40'; 'B Lot width at front setback, min (ft) 70'.",
      "reason": "All three numbers and the citation (Sec. 3.2.4; Table 3-5) match the primary source. The blind extraction agrees. The use-specific lot rules in Ch. 4 (duplex, cottage) are separate qualifications, and leaving them out does not make the district-wide statement wrong.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "mooresville-nc"
    },
    {
      "id": "ef3f9c1f5633a22278b8a310724fa0406939ab31ec229c9041f8856f525243e3",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "§3.2.3.D, Table 3-4 (p.125), RLS All Uses: 'F Building height, max (stories) 3'.",
      "reason": "The published 3-story maximum and the citation (Sec. 3.2.3; Table 3-4) match the source exactly. The blind extraction agrees. Story-height definitions and solar or water-tower exceptions are ancillary and not required in this row.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "mooresville-nc"
    },
    {
      "id": "ffac83edc0b6d63fec4d8154ae314d323a713ee96226d8886dd2a5f07d0ef8fb",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "mount-juliet-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "e3f5ab706d6bc6c49b1b324823fb4f6918745585ecf7d1b76801a24eab29554f",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "mount-juliet-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "00f9d1ce7be0e36630b64c2e6f191e1e4e354dceb2734fcf8003765b85edfcca",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "mount-juliet-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "3b04cb6663044f939fc7d2823b094acf3f72194a5e62ff4a5057ead64d66557d",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "mount-juliet-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "c5b748ae4c809a30b0f184131392d4398ad09ae62d83fbfaaf21f445db2b2c20",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "mount-juliet-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "7d93a94974b9b72e4ba5a69f5da8af2e0a564fd3dbaeeab51cedd8d089c47161",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "mount-juliet-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "c9aa765710eb3820b7ac2bde763eccea51fe1da1cd4245b59f1b0c74eb153a90",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "mount-juliet-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "00aca5891c3eb86d92228a6987bdbd13cad93aab6e9e410be8e4df6fd4165c9e",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "murfreesboro-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "76242297ab8a0d4e6792e09984690d9807c99ab13f6bf074d6114a6dfbf6cf84",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "murfreesboro-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "db87fbeb07d53e4ec6cfcfb301ccd5e80d15daaa5e3d5a5eecff43893b869049",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "murfreesboro-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "d969abf1b0e5a8c6cf4e75dc7770a743d496e47a67202fea4db737ccc1c1f07f",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "murfreesboro-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "9de19fce1780bf37eae1fb97c9106bdcbf69185c542e0386c7367002c5ed1d73",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "murfreesboro-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "d5639d2f7bc54d925174041e1e94eac8c4f14023b227d8364dcb19bc92d20b2f",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "murfreesboro-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "4f85126f843b271855c18607f21ee55a5a5e0374411f8f94010fd553f8e6778d",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "murfreesboro-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "617be577523d5ec088526935435a0e7287d9bd656cab117f2ba3ec2692755f5d",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "murfreesboro-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "623ac42ef8b7edb670132558291f8b7335e8a3fcabc5dcdc58da2cecead13e20",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "murfreesboro-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "fb1fcede57eb35a86920833dfae51842174d180ced784e23e17386f756d01137",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "murfreesboro-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "4f043ff7c8f27c6b411eb0fd5e60b3c734258362d9c4f26c39595a6a06bd208c",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "murfreesboro-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "43a8bd389e2beb44480c69f63c0e3d1c8eca7cb76be22e43a09da7f8d0587eac",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "murfreesboro-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "d721e223d3a2e7a0c753bce5fbdfd4a0658e92259517646ed8bf2a501b5b9025",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "murfreesboro-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "45642b99cfc66f79da69354d7de745c38cdbb960e33b3fca3af432bfa14c0b72",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "murfreesboro-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "6d070cd73ab3b13213dafa1c8aed5e587c9cf198d6bea0c1175f2e882b483b0a",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "murfreesboro-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "f641f994767ee2c92e0181b4533b6babcf82533a5e68414c7b420e491180e4d6",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "murfreesboro-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "238c69eb427b71444d8fded0e9cd82246957620d9deedf25053b204996581a93",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "murfreesboro-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "345dd317455d5ea43ca5eb67048c7998168704bb2f8085fa62950fdda3bb0bac",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "novi",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "fcc973384bf0d24c14fcf6459db3abe5acf0e71431b7c52595846d59455d4a4f",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "§3.1.20.D, p. 3-47: 'Lot Size Minimum lot area: 2 acres; Minimum lot width: 200 ft; Lot Coverage Maximum lot coverage: See Section 3.6.2.D'. Notes: 'refer to Section 3.6.2 Notes to District Standards: C, D, E, L, M, P, and Q'. Selected References: 'NCC Required Conditions §3.16'. The District Summary Table on p. xx agrees: 'NCC Non-Center Commercial 2 acres 200 ft'. Section 3.16 (TOC p. 3-108) and Section 3.6.2 are not in the excerpts.",
      "reason": "The 2-acre minimum area and 200 ft minimum width match §3.1.20.D. The published row also makes two further material assertions attributed to Section 3.16: a 0.25 floor area ratio cap, and a 25 percent greenspace minimum that excludes parking lots and aisles. Section 3.16 is absent from the supplied source, so those claims cannot be confirmed or refuted. The excerpt also shows that §3.1.20.D refers maximum coverage to §3.6.2.D, not to §3.16. Because the source is inadequate for the full statement, the row is unassessed rather than supported. The blind answer's sufficient=true covers only the area and width.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "novi",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "a10c34c1a0821ebb80a41ee4d4b126edecc774d28c5b13b6e597d94419ba0f6e",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "§3.1.7.C SPECIAL LAND USES, p. 3-16: 'i. Convalescent homes, assisted living facilities, hospice care facilities and child care centers §4.21; ii. Accessory buildings and uses §4.19 customarily incident to any of the above permitted uses'. Footer: '(Amended by Ord. No. 18.282, Pt. III, 7-08-2019)'. The text of Section 4.21 (TOC p. 4-16) and Section 6.2 (TOC p. 6-10) is not in the excerpts. §6.2 appears only as a Selected References entry on p. 3-17: 'Public Hearing § 6.2'.",
      "reason": "The two listed special land use categories match §3.1.7.C. The published row also gives material §4.21 conditions: 1,500 sq ft of land per bed, 100 sq ft of outdoor play area per child, a 2,800 sq ft minimum fenced play area, and a 40 ft building setback from property lines. It also asserts that a public hearing under §6.2 is required. Neither §4.21 nor §6.2 is in the supplied source, so these numeric conditions and the procedural assertion cannot be verified. The source is inadequate for the full statement.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "novi",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "b7d9b5291ac883b700381cc30bdd6de4063ec991678ea5211191130b4c09ac1c",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "novi",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "ab37fb4608d2f2aa50113cc4a05b7bc7640b372d9165e6ac5756f77e26dc7595",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "orion-township",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "e03725ea882a2b97da6a9b97f0f65c9f03986d0f71a311bc6e5806828a47efb4",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "orion-township",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "bde88fba92c760f438c939a20cc24336b36591328f5c91e59eac626d5397ed27",
      "status": "error",
      "error_class": "applicability",
      "severity": "high",
      "evidence": "The requirements of this Section shall be applied in addition to the requirements of the applicable zoning districts and other applicable sections ... Where conflicts exist ... this Section shall supersede.",
      "reason": "Section 34.01A expressly incorporates corresponding district standards. The published direction not to apply general district tables reverses this requirement.",
      "published_kind": "conditional_or_referential",
      "blind_kind": "explicit_standard",
      "municipality_slug": "orion-township",
      "district_code": "BIZ",
      "topic": "permitted_uses",
      "decision": "confirmed_error",
      "original_assessment_status": "error",
      "original_error_class": "applicability",
      "original_severity": "high",
      "operative_quote": "The requirements of this Section shall be applied in addition to the requirements of the applicable zoning districts and other applicable sections ... Where conflicts exist ... this Section shall supersede.",
      "source_url": "https://cms9files.revize.com/oriontwp/Zoning%20Ordinance/section%2034%20Final.pdf",
      "source_file": ".tmp/accuracy/source-bodies/orion-township/93bd158f5dce9f12.pdf",
      "source_pdf_pages": [
        1
      ],
      "source_sha256": "c95884b7aa8bd0d81d47bcf7094ceb46bbb3dace625481dc09b9eb98531986be",
      "proposed_replacement": "BIZ standards apply in addition to the applicable zoning district and other ordinance requirements. The Planning Commission determines the corresponding district based on the permitted uses; BIZ provisions control conflicts. Apply permitted/prohibited use Tables 34-1 and 34-2 and the conditions in Section 34.01B-D.",
      "proposed_citation": "Article XXXIV, Section 34.01A-D",
      "publication_changed": false
    },
    {
      "id": "780db8cd7418126b821fc0725001f7a7a3783c7cea56783ad9c4737b8b40703e",
      "status": "error",
      "error_class": "omission",
      "severity": "medium",
      "evidence": "Outdoor display and sales shall not exceed ten percent (10%) of the building or one thousand (1,000) square feet, whichever is less.",
      "reason": "Published 1,000-square-foot allowance omits the smaller building-relative limit.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "orion-township",
      "district_code": "GB",
      "topic": "permitted_uses",
      "decision": "confirmed_error",
      "original_assessment_status": "error",
      "original_error_class": "omission",
      "original_severity": "medium",
      "operative_quote": "Outdoor display and sales shall not exceed ten percent (10%) of the building or one thousand (1,000) square feet, whichever is less.",
      "source_url": "https://cms9files.revize.com/oriontwp/Zoning%20Ordinance/section%2014%20Final.pdf",
      "source_file": ".tmp/accuracy/source-bodies/orion-township/ea35233ffca8ccfd.pdf",
      "source_pdf_pages": [
        4
      ],
      "source_sha256": "6f1070261911288a7d9857f65b87aa7f8ebe4d55a238532af15038f585cb7bae",
      "proposed_replacement": "Replace the outdoor-display phrase with: outdoor display and sales limited to 10 percent of the building or 1,000 square feet, whichever is less, subject to Section 14.02G, including administrative review and permitting.",
      "proposed_citation": "Section 14.02G",
      "publication_changed": false
    },
    {
      "id": "41f509d467c4d951dbbbfa2c0f3f1a116708541ecd05ba7b956555e97b1ca5a3",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "§14.04 (Applies to Principal and Accessory Uses), p.14-7: \"Maximum Heights of All Structures 25 ft.\" Art. XXVI Schedule, p.26-3: GB 25 ft.",
      "reason": "The published 25 ft maximum for all structures matches §14.04 exactly.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "orion-township"
    },
    {
      "id": "79c9dcb17dcb383cacd2b3f5a3f86d851d6cb314c069dd5169da7179a15411b1",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "§18.00, p.18-1: IP districts are for \"industrial subdivisions/condominiums or stand-alone developments ... in a park-like setting\", with \"full provision of roads and utilities and with adequate setbacks, greenbelts, and landscaping\". The district is \"intended to provide locations for similar activities as are permitted in the Limited Industrial District.\" §18.01 contains the use matrix with P/S designations.",
      "reason": "Each published assertion (intent, similarity to LI, and that the §18.01 matrix controls by-right versus special uses) is supported. The row refers to the matrix without enumerating uses; it does not claim that no standard exists.",
      "published_kind": "conditional_or_referential",
      "blind_kind": "explicit_standard",
      "municipality_slug": "orion-township"
    },
    {
      "id": "b0bb98aa8263c566e4c72c02f64e86a6533df96866f341a6c55ab49277f54a7e",
      "status": "error",
      "error_class": "omission",
      "severity": "low",
      "evidence": "Outdoor patio P E. Restaurant uses may also include outdoor patio subject to administrative review by the Building Department.",
      "reason": "The published detailed use enumeration omits outdoor patios. This is accessory to restaurant uses and does not remove restaurant special-use approval.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "orion-township",
      "district_code": "LI",
      "topic": "permitted_uses",
      "decision": "confirmed_error",
      "original_assessment_status": "error",
      "original_error_class": "omission",
      "original_severity": "low",
      "operative_quote": "Outdoor patio P E. Restaurant uses may also include outdoor patio subject to administrative review by the Building Department.",
      "source_url": "https://cms9files.revize.com/oriontwp/Zoning%20Ordinance/section%2016%20Final.pdf",
      "source_file": ".tmp/accuracy/source-bodies/orion-township/41bff0702ba7b300.pdf",
      "source_pdf_pages": [
        2,
        3
      ],
      "source_sha256": "eb7eba1710c29e2da3e847ca5c9d065997cf3b24521dae9a2aca398d28ead71f",
      "proposed_replacement": "Add: Outdoor patios accessory to restaurant uses are allowed subject to the administrative review in Section 16.02E; this does not remove the special-use approval required for the restaurant.",
      "proposed_citation": "Sections 16.01 and 16.02E",
      "publication_changed": false
    },
    {
      "id": "056458ab5c2763c5635288819efacacafc18af9a997ebd4282cc1203fdf567b6",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Art. XXVI Schedule, p.26-4: SP-1 (Whole Dev.) Minimum Lot Area 10 acres; SP-1 (Each Structure) 5,000 sq. ft. These are corroborated by §21.03(B)(1), p.21-3 (\"minimum development area shall be ten (10) acres\"), §21.04 (10 acres) and §21.05 (5,000 sq. ft.).",
      "reason": "Both numeric standards and the Article XXVI citation are supported by the primary text.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "orion-township"
    },
    {
      "id": "6a88c51149d53e3271710130641bd84e661af5106589f6af15ee280e1a4145fb",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "LDC §155.421(C), Table 155.421.1 Residential Single-Family (R-1A), p.100: 'Maximum Height | Two Stories or 35 feet | Two Stories or 35 feet' (Residential and Non-Residential columns).",
      "reason": "The published maximum of two stories or 35 feet matches the R-1A table for both use columns. The citation to §155.421 Table 155.421.1 is correct. The blind reading agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "pembroke-pines-fl"
    },
    {
      "id": "12960373ed3cb3ac9fe43e8a43e4f4d8ebe4926c828aaf2a2a5f5e344bc8ea54",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "LDC §155.422(C), Table 155.422 Residential Single-Family Zero Lot Line (R-1Z), p.102: 'Maximum Lot ... 45% Coverage' (garbled extraction of 'Maximum Lot Coverage 45%'); 'Minimum Floor Area 1,300 square feet'.",
      "reason": "Both published values, 45% maximum lot coverage and 1,300 sq ft minimum floor area, appear in Table 155.422. The citation is correct. The blind reading confirms the 45% figure. The floor-area figure is a supported extra fact, not an error.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "pembroke-pines-fl"
    },
    {
      "id": "b5817e083048cdd9dbf4aca691baad27cc288d66d4dd86cd17e014b58b902ce0",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "LDC §155.424(C), Table 155.424 Residential Two-Family (R-2), p.105: 'Front Setback 25 feet | 30 feet; Side Setback 7.5 feet [2] | 20 feet [3]; Rear Setback 15 feet | 25 feet; Street Side Setback 15 feet | 15 feet'. Note [2]: 'However, if two-family dwelling is erected on two platted lots, no setback is needed along common wall and lot line.' Note [3]: 'Side setback shall increase by one foot for every two feet in height of structure or building exceeding 20 feet.'",
      "reason": "All published values match the table and notes: front 25/30, side 7.5/20 with the height escalator, rear 15/25, and street side 15. The published text drops the words 'two-family dwelling' from note [2]. The 'common wall' wording still conveys the attached two-family context, so this is not a material change. The citation is correct, and the blind reading agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "pembroke-pines-fl"
    },
    {
      "id": "075b58d98f0974f0875ddc0beb8a3ed9afbf7b5095e779b34dd376db69a334f9",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "pflugerville-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "d205e167ed647fad54d10e202c27eda76c9f9d50e0355a0dc00ad3651437f42e",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "pflugerville-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "8875be6e76089efeed347fb4884d95503e18aef23393535a2fa9c2d34601fd10",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "pflugerville-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "22394fb7c0ba7dd8265ff44de2d30bc5c142e9bb6bb72067f9225c958d3a1d0f",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "pflugerville-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "bca998c52158eb4d8f95031ff26f988f1fbe767cc18375542a0017a3aa8e2e05",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "pflugerville-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "8e574422070a009b54745773c2849091e847f1e8b376cf5b9cca22ab5e735523",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "pflugerville-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "3ba4197a771179b6511d6f193101eba6d039a509e3f27fca3448a074d7b5ed30",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "pilot-point-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "08498a1db9f68a99f15c1f094d1739587288bb7f0e32869f6bd6e718fb0f3f78",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "pilot-point-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "531ee296ec1689148b820f9a54e7fb860bd1f19cffa59c90b02ce17774d2a8cb",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "port-st-lucie-fl",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "b22c7c670e692e3c960b3d45815e9419bc90f42886dae82daa5006038de73863",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "port-st-lucie-fl",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "5df6a6ccb359f8853643cab864e0b8f139c84d3b8ac44cee3d59aa7355d2f599",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "port-st-lucie-fl",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "126e4653d6ea1421c057cd84a8e9f5832a9315a01c0abd9590e2f0a07c0a3911",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "port-st-lucie-fl",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "74500cb9a68b629c168006df31395cc428a74a9e708f30f24da4aa5ba02eb8d8",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "port-st-lucie-fl",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "8eafdb674e415136127dde281942dd963d0598daeb3da2436474388c1d3cc136",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "port-st-lucie-fl",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "428c9704419f7076976b3bb8c21f30099bf29d894f2c148306dfd4f2c1efb6ae",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "princeton-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "0a605734e30696612ea7867e116d9f2fbca6d10534743be6f87726a058b3e641",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "princeton-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "fc6429f72e4066fabf886685156594511df96a786995bba4ce19f41f11bc924c",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "princeton-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "76eb65d7bc45e3f7eb90e1485b60f7b972ebbb5acf0ad33738d96f0f7bf8286f",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "princeton-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "2eff9752ffa8141d29eb4a00ae60e4120f511746fdcc5c1a738562ca7e0c3a35",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "princeton-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "fd73b931a803e2baed6a0bb51bc12c0a198c6e6710c3b482037ad142eb364e6b",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "prosper-tx",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "a83a8a527843d7d5a7c85e2d87cd5138fa51bbf5c40cc76e2d7fb0b5323ca009",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "UDC 2.04.D.3.b Dimensional Standards, Single Family-15 District table (p.45 printed / PDF p.51): 'Minimum Lot Area 15,000 square feet; Minimum Lot Width 100 feet; Minimum Lot Depth 150 feet ... Minimum Dwelling Area 1,800 square feet.' 2.04.D.3.a (p.44) also states a 'minimum lot size of 15,000 square feet'.",
      "reason": "All four published values and the citation 2.04.D.3.b match the primary text exactly. The PD/SUP caveat is advisory and consistent with the source. The blind extractor did not list dwelling area, but the source table explicitly shows 1,800 sq ft.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "prosper-tx"
    },
    {
      "id": "1854b2ed72b3b0c654adccae4fe572417ee58a1682b0f5b3eecc3f808f913fb1",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "UDC 2.06.A (p.55) gives the Town 'an opportunity to approve, conditionally approve, or deny identified specific uses that may be permitted in specified zoning districts.' 2.06.C.7 (p.56) requires the zoning map to be amended 'to indicate the appropriate zoning district for the approved use and prefixed by an \"S\" designation.' 2.06.C.2-3 (p.55) let the Town Council impose conditions and bind the grantee to 'the written requirements of the SUP as attached to the Site Plan drawing(s)'. 2.06.B.1 requires a Site Plan with every SUP application. Fig. 2.04-1 (p.36) lists SUP under Special Districts, but no SUP dimensional table appears in 2.04.D-E.",
      "reason": "Each published assertion is supported by the primary text. The SUP is a conditional, use-specific approval tied to specified base districts. The map shows the base district with an 'S' prefix. Written conditions and site plan requirements bind the use. Calling the SUP 'not a standalone zoning designation' is a fair reading of 2.06.C.7 even though Fig. 2.04-1 lists it as a special district, because no separate dimensional standards exist. Citations 2.06.A and 2.06.C.7 are accurate.",
      "published_kind": "conditional_or_referential",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "prosper-tx"
    },
    {
      "id": "08dc3e8047d6aca6cfde4b21b703d244bd4a144bddf116da7862f48eba5fa46f",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "queen-creek-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "5bf03238492d10c73f6b40c3fa3d9c40980ddbcfc0dade154952ebaa68c8f1e5",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "queen-creek-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "f748dfdd6eeb5575780545b9999dac3a6cca4c0c5e64534d6d1f0fae8ba51c30",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "queen-creek-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "de17dc29025b228da5da41dc8b1de923a482bc46b607a3d37fc30425ea1c84b4",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "queen-creek-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "badbc5d37c83c3005713dbd5983a9a9a0b8011fd6f51a9342508c90a718c8332",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "queen-creek-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "a00806349a30f800263eb6d247e97a5e80d3174d5905defecffb2e2f60e19f40",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "queen-creek-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "9cb4ffbcab1f8db304cf10aeafb10d1ea8cf8a399a6db0755f193544dcab57bf",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "queen-creek-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "db41817ed1de22e8ad29e697fed4857dad6ef6e9cbf8e0f73020990e7cc033bc",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "queen-creek-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "a47a048d2e10b1f05f63b6ab37aa750dd7c7b8114ed2a3c056e8a60944e6d422",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "rochester",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "f359b30658737b41bf7843c6a91e8bdd5ea2628d0b55b43c4c2efca76514c939",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "rochester",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "a58c2a6a0c39e4a77370daf268501e25ff2317f1d1b1f37b26e8e36cb7dd0353",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "rochester",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "7821022341150fa2b5e6b62f146626e571fbd1e9f189a973c8230d0af37960fa",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "rochester",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "4abe8e6ed96c7cf333e50045175a2b1de5b9e8c031f79fbd7867f25945471e89",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "rochester",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "2a94b1dd3810b2831c720974ad8128ebd3a9b420b0f2006276c02740bd58c1be",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "rochester",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "0bb48771095ea0ce9d2b993e899552a2aa9c39bed968eb4fee215ad746219ece",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "rochester",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "3db733220cfa5dc84aa0019723086d577d0aff9ce432bca84f03a973ea06a4bb",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "rochester",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "bb74a98184d32a434edeec3f4e7816621b37059cf90f316751fc9228802d0b8c",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "rochester",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "2c38dd4684c6765f4a517553dc44e1759e79161480924a4f72bf8e2483f8b689",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "rochester",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "a8a718cc8d4fc7d4965036f96c785d252b16ba9254854841731b404c26be34d1",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "rochester",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "e3c9b2683fec0b7a3c8f70455a07293af2c5f5de527e02350c60ef9c7b78d7e9",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "rochester-hills",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "cb849667ca7e83fb30b95b8c1f09e3c6880c942246d35f8b2bf0dc7acbe1b6d7",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "rochester-hills",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "5c2c90a4eed37a1cf976a94f93456a4b3157516209193b7a1f1744cf8d543d43",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "rochester-hills",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "8f02b1d00aade7d6e5ad31dac72a44a53c5e02cb0ce7e8fa3f437463d27a20c8",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "rochester-hills",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "44f5ede31b86c542e62f45b7b7c187af215a1b91a7b41f60edf732ec580052c0",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "rochester-hills",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "4cb0daa6a7c429580ba3ec6ca8edf18a0d00053236d3db5f6444a53ec12064c5",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "rochester-hills",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "7ab6cbc091caefa44fa6ef53632609c004c83082370a0a404e4b54292e21290c",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "rochester-hills",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "529723227caf32169afd947a5bdb2394f4e821a1b17304ac3cbaa37964e1666f",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Art. 05, Subsection 02.01(C), p. 5-6: AG development 'shall conform to Subsection 03.01 ... and the related standards listed within Subsection 07.01.' Table 07.01, p. 5-79: abbreviation row 'SFE-1.5 SFE-2.0 SFE-4.0 SF-1 SF-16 SF-10 SF-8.4 SF-7 ZL-5 2F AG'; 'BUILDING HEIGHT (FEET) 36 36 36 36 36 36 36 32 30 32 36'. The last value, 36, is in the AG column. Table 07.04, p. 5-82, sets separate accessory-structure heights.",
      "reason": "The source states the 36 ft maximum for AG. The citation to Subsection 07.01 is correct. The caveats about overlays, PD terms, and accessory structures are consistent with the source. The blind extraction agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "rockwall-tx"
    },
    {
      "id": "3b5ce53edeecef02a99558de28b814a253b0c5914d3af018df7f6f2923067aca",
      "status": "error",
      "error_class": "omission",
      "severity": "medium",
      "evidence": "Minimum building height: 2 stories. Maximum building height: 4 stories [square/other blocks]; 2 stories [blocks facing single-family]. Maximum building height shall be two (2) stories when within 200 feet of single-family zoned property.",
      "reason": "Visually inspected Table 1 and read fourth-floor setback and waiver clauses. Internal draft referral is not an operative height answer.",
      "published_kind": "unresolved",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "rockwall-tx",
      "district_code": "DT",
      "topic": "height",
      "decision": "confirmed_error",
      "original_assessment_status": "error",
      "original_error_class": "omission",
      "original_severity": "medium",
      "operative_quote": "Minimum building height: 2 stories. Maximum building height: 4 stories [square/other blocks]; 2 stories [blocks facing single-family]. Maximum building height shall be two (2) stories when within 200 feet of single-family zoned property.",
      "source_url": "https://www.rockwall.com/pz/Planning/Documents/Unified%20Development%20Code%20(UDC).pdf",
      "source_file": "sources/rockwall-tx/udc.pdf",
      "source_pdf_pages": [
        72,
        73
      ],
      "source_sha256": "6254fbc35492bb831cc35fef5df22e76d7afd0b0c3b3ecef2f9019523f181703",
      "proposed_replacement": "DT buildings require at least 2 stories. Maximum height is 4 stories on blocks facing the square and other blocks, and 2 stories on blocks facing single-family; the maximum is also 2 stories within 200 feet of single-family-zoned property. Buildings above 3 stories must set the fourth floor back at least 8 feet behind the first-three-story street-facing building face. Feature-building height increases require a minor waiver at site-plan review; other added height and changes to the fourth-floor setback require a major waiver.",
      "proposed_citation": "Article 05, Section 04.07, Table 1 notes 1 and 3; Section 04.07D.2.b(1)",
      "publication_changed": false
    },
    {
      "id": "55c33c5f2c0e416ffe297093701be3aac98c6007a0aad7a745ccb2656b8ad6ca",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Art. 05, Subsection 07.03, Table 'Non-Residential District Development Standards', p. 5-81. The RO column is 'N/A, 6,000 3, 60, 100'. The NS column is '5,000 1' (maximum building size), then '6,000' (minimum lot area, SF), '60' (width, ft), and '100' (depth, ft). These sit under the rows MAXIMUM BUILDING SIZE (SF), AREA (SF), WIDTH (FEET), DEPTH (FEET).",
      "reason": "All three published NS minimums (6,000 SF, 60 ft, 100 ft) match the Table 07.03 NS column. The arithmetic remark is accurate. The snapshot-verification notes are not zoning assertions. The citation is correct. The blind extraction agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "rockwall-tx"
    },
    {
      "id": "be40e3fac126b46d87ab9a00a6ea5d19ed982aa3bf4c8aacc35ffeff0e7c3053",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Art. 05, Subsection 03.07(C), p. 5-8: SF-10 'shall conform to ... Subsection 07.01'. Table 07.01, p. 5-79: SF-10 is the sixth column in the abbreviation row. 'BUILDING HEIGHT (FEET) 36 36 36 36 36 36 ...' gives 36 for SF-10. Table 07.04, p. 5-82, sets accessory buildings in SF-10 separately at 15 ft.",
      "reason": "The 36 ft maximum for SF-10 is stated in Table 07.01. The caveats are consistent with the source, and the citation is correct. The blind extraction agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "rockwall-tx"
    },
    {
      "id": "b84038dfdc490a45ade28777efc6024a2f0f330d55cea3e9d86ef4d09d2b7a9d",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Table 07.01, p. 5-79, SFE-1.5 is the first column. The lot rows read 65,340 (area), 150 (width), and 250 (depth). The minimum setback rows read 50 (front), 10 (rear), 25 (side), and 10 (between buildings). Additional Requirement 3: 'THE SIDE SETBACK ADJACENT TO A STREET IS TREATED THE SAME AS A FRONT YARD BUILDING SETBACK.'",
      "reason": "The published front 50 ft, rear 10 ft, and side 25 ft match the table. The note 3 treatment of street-side yards is accurately stated. The citation is correct. Omitting the between-buildings value is not an error, because the row does not claim it is unavailable. The blind extraction agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "rockwall-tx"
    },
    {
      "id": "1952f450390118cbc15864d15ff4d1d6119bd370af5519d0f56a634024cdf3a6",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Art. 05, Subsection 03.04(C), p. 5-7: SFE-4.0 conforms to Subsection 07.01. Table 07.01, p. 5-79: 'MAXIMUM LOT COVERAGE (%) 35 35 35 45 45 45 45 45 50 45 N/A'. The third column (SFE-4.0) is 35.",
      "reason": "The 35% maximum lot coverage for SFE-4.0 is stated in the source. The caveats are general and not contradicted. The citation is correct. The blind extraction agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "rockwall-tx"
    },
    {
      "id": "e440b6d8a7ff46a8dabd34a54d6fb9e35b70f3e541aca53912d7c913645edb33",
      "status": "error",
      "error_class": "omission",
      "severity": "medium",
      "evidence": "Unless otherwise addressed in this section, all other standards and requirements of the underlying zoning district shall govern. ... Special requests shall not include any request to change the land use of a property.",
      "reason": "SRO is an overlay; the published internal use-table referral omits the operative base-district rule and limitation on special requests.",
      "published_kind": "unresolved",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "rockwall-tx",
      "district_code": "SRO",
      "topic": "permitted_uses",
      "decision": "confirmed_error",
      "original_assessment_status": "error",
      "original_error_class": "omission",
      "original_severity": "medium",
      "operative_quote": "Unless otherwise addressed in this section, all other standards and requirements of the underlying zoning district shall govern. ... Special requests shall not include any request to change the land use of a property.",
      "source_url": "https://www.rockwall.com/pz/Planning/Documents/Unified%20Development%20Code%20(UDC).pdf",
      "source_file": "sources/rockwall-tx/udc.pdf",
      "source_pdf_pages": [
        83,
        94
      ],
      "source_sha256": "6254fbc35492bb831cc35fef5df22e76d7afd0b0c3b3ecef2f9019523f181703",
      "proposed_replacement": "SRO is an overlay. Apply the underlying zoning district land-use permissions unless the overlay addresses the requirement; SRO governs conflicts. A neighborhood-preservation special request under Section 06.05B cannot change a property land use. Determine the underlying district and apply its use schedule and any relevant overlay conditions.",
      "proposed_citation": "Article 05, Sections 06.01 and 06.05B; Article 04 use schedule",
      "publication_changed": false
    },
    {
      "id": "761123f6303c366a3dd01e0c6db9544e822984e6cf0c0c0c4ab8a7a97b6e473c",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "round-rock-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "21c1bddeb22de06c9067c3bde73635cc5f57871534242c438d44f159f7cc501f",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "round-rock-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "2934f0f5278a68b1e8b2e02cb264fb08661613fc8984ffdea0df0589f7bbce9c",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "round-rock-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "8d9269e9e12c962b9a024c9a94dd32a858d0d9fe2915e18e3fc2bd97da72a65d",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "round-rock-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "48a5c95c3f014c6a4cf4c3b8cf02f11637c5b920655cbd238098f3c70cbb28cb",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "round-rock-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "31ca651dbb8d5a8b14777e6efedb87ef2a17c6add08c9ab4e8647e158a142275",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "round-rock-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "2881861e2b8d88aa64d27e262bc65f4f79d41d54c65229453bef6b59f7427ff9",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "round-rock-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "0af2725faf1364bb81f4b02dd89f268d8d49fb83f096fc3d23be65342b429153",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "round-rock-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "141fdc884ca91ba7a1699651511c4017e042974434fce346629ab4db8690429b",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "p.49 §770-34C(1)-(11) lists the special land uses: group family day-care homes and day-care centers with an existing church or school (§770-59), police/fire/public safety/utility buildings, churches (§770-74), bed-and-breakfasts (§770-78), residential accessory parking lots (§770-73), senior accessory housing (§770-71), golf courses and country clubs, cemeteries (§770-50), community centers (§770-51), overlay uses (§770-58), and school reuse (§770-87). p.25 §770-11B(1),(3): 'Special land use permits may be granted by the Plan Commission at its discretion... a public hearing shall be held in accordance with § 770-13.' p.30 §770-13B: mailed notice to owners and occupants 'within 300 feet', given 'not less than 15 days before' the hearing. p.106 §770-73, p.77 §770-52B(1) and p.78 §770-52.1B: 'final determination... shall be made by the City Commission following a recommendation from the Planning Commission.' p.141 §770-98A: a PUD 'shall require rezoning... based upon a recommendation of the Plan Commission and approval of the City Commission.' p.167 §770-126A-B covers amendments. p.26 §770-11D(1): first building permit within one year unless the Plan Commission specifies otherwise; the Zoning Administrator may extend for good cause. §770-11E: one-year bar on resubmission except for newly discovered evidence or changed conditions.",
      "reason": "Every procedural assertion and every listed use is supported by the cited text. The list is introduced with 'include', so it is not presented as exhaustive. It omits the §770-58 overlay uses and 'country clubs', but neither omission falsifies any listed item. The reapplication sentence omits that the Zoning Administrator determines sufficiency; this is minor wording. The City Commission items are framed as chapter-wide exceptions, not as uses allowed in 1F. The blind extraction agrees on the list.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "royal-oak"
    },
    {
      "id": "52702279ec8e0b27b40219e3fbc5561cb039013b375ee68c6afe56b8b1a20a66",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "p.50 §770-34D(5)(a): 'set back the greater of 25 feet or the average setback of adjacent dwellings, but shall not exceed 50 feet.' (5)(b): corner side-street yard 'not less than 10 feet' where the adjacent lot does not front the side street; 'frontage of less than 50 feet... reduced to not less than eight feet'; interior-lot minimums apply where the adjacent lot does front it. (6)(a): 5 ft and 15 ft total for lots of 45 ft or more 'if no attached accessory building is provided in the side yard.' (6)(b): 4 ft and 12 ft total. (6)(c): 8-ft open area suitable for a driveway for lots without side-yard accessory buildings. (7): 35 ft rear. p.40 §770-21C(5)(a)-(c): no setback at grade; 3 ft from rear and side lines when 6 in or more above grade and entirely in the rear yard; principal setbacks apply in the side yard. Porches/steps may extend 7 ft, one story maximum. Listed features may project 24 in; 'projections containing floor area shall meet the minimum setbacks.'",
      "reason": "All numeric values, conditions and the §770-21C(5) exceptions match the source text. The blind extraction is consistent.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "royal-oak"
    },
    {
      "id": "abb4b2d976fac2ac4046eded916d11e78dba073ae3952714c1a54ac5f5f117f0",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "p.50 §770-34D(8): 'On lots less than 6,000 square feet, the lot coverage of all buildings shall not exceed 35% of the site, provided that in no instance shall the total ground floor area of all buildings exceed 1,800 square feet. On lots equal to or larger than 6,000 square feet... shall not exceed 30%.' §770-34D(9): 'No single-family residential structure shall exceed 3,500 square feet of usable floor area.' p.41 §770-22A(6): 'Accessory buildings shall be included in the total lot coverage limitations.'",
      "reason": "The percentages, the 1,800 sq ft cap, the 3,500 sq ft floor-area cap and the accessory-building inclusion are all verbatim-supported.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "royal-oak"
    },
    {
      "id": "588eee93b72326ef92557432df78cb22e439d2029f63032889bf432972681c56",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "All special land uses allowed in the One-Family Residential Zone.",
      "reason": "Section 770-35C lists special uses by incorporating the One-Family zone. The published answer correctly directs readers to that controlling section and states no false permission. The assessor treated the valid public cross-reference as a substantive error.",
      "published_kind": "conditional_or_referential",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "royal-oak",
      "district_code": "1FL",
      "topic": "special_land_uses",
      "decision": "false_positive",
      "original_assessment_status": "error",
      "original_error_class": "omission",
      "original_severity": "medium",
      "operative_quote": "All special land uses allowed in the One-Family Residential Zone.",
      "source_url": "https://ecode360.com/4478808",
      "source_file": "review/freshness-2026-10-19/royal-oak-ch770.pdf",
      "source_pdf_pages": [
        49,
        51
      ],
      "source_sha256": "edf9a0dc22364296a4640053d5721e57f50caeb9b787a9d6e0c6733fad607cb8",
      "proposed_replacement": "Optional clarification only: 1FL incorporates the One-Family special land uses through Section 770-35C(1), referring to Section 770-34C.",
      "proposed_citation": "Sections 770-35C(1), 770-34C",
      "publication_changed": false
    },
    {
      "id": "5624f0a49af6e7d1111ff3d4281608c0588bcfa041a55b52a2bb01e7e141ce19",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "p.52 §770-36D(4): 'No principal buildings shall exceed a height of 30 feet.' p.40 §770-21D(2): height runs from 'the average of the finished grade at the base of the front of the building to the mid-point of the roof surface for pitched roofs and to the roofline for flat roofs.' §770-21D(3): roof structures 'shall remain proportional', 'shall be effectively screened and setback from the building edge', and 'No such structure shall exceed by more than 15 feet above the height limit.'",
      "reason": "The 30-ft limit, the measurement method and the rooftop exception all match the source. Limiting the statement to principal buildings is consistent with the source.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "royal-oak"
    },
    {
      "id": "5ee70a33c94ae600bc081a3a29e7f6406cc734f89339daf3c509b671159a842c",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "p.62 §770-41D(2)(a): 'No setback shall be required except where the property is adjacent to a residential zone. If a setback is to be provided, it shall not be less than five feet.' [1]: the front setback equals that required in the residential zone when on the same side of the street and same block, 'with or without an intervening alley.' [2]: 25 ft where there is no intervening alley; '25 feet measured from the centerline of said public alley.' pp.62-63 (b): 'the Plan Commission during the course of its site plan review process may establish a greater or lesser setback,' considering the listed criteria.",
      "reason": "Every assertion matches §770-41D(2). The blind extraction classified the rule as conditional, but the published rule states definite numeric standards with a normal discretionary exception.",
      "published_kind": "explicit_standard",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "royal-oak"
    },
    {
      "id": "ab9645a009c0dea1a1aa146921e6ad33133f6b3edcc090f7ae6265621899eb1c",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "p.71 §770-44D(1): 'Height. No building shall be taller than four stories or 50 feet.' p.40 §770-21D(2): measurement method. §770-21D(3): proportional, screened, set-back rooftop structures 'No such structure shall exceed by more than 15 feet above the height limit of the district.'",
      "reason": "The district limit, measurement method and rooftop exception match the source. Use-specific limits such as hospitals at 140 ft under §770-79A(5) are separate rules and need not be repeated here.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "royal-oak"
    },
    {
      "id": "3e5d76326914e3ac158c7a3a0f7f40c138ea61a5ac3333c600b5bf6f7b984343",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "p.75 §770-48A: 'All special redevelopment projects are subject to the criteria and standards set forth in § 770-87.' This section has no numeric setbacks. p.118 §770-87D(1): residential 'project density shall be determined by the Plan Commission... deviations from the applicable setbacks... may be granted as part of the overall approval.' §770-87D(2): nonresidential uses need 'adequate separation and buffering from adjoining residential uses' and 'all development design standards and regulations of the district... shall be met, provided that deviations from the applicable setbacks... may be granted.' p.119 §770-87G: 'the special land use, with all conditions, shall constitute the land use authorization for the property.'",
      "reason": "The source supports both the absence of a fixed SR setback and the dependence on approval, deviations and the approved plan. Use-specific perimeter setbacks for senior housing under §770-72B(1) are a separate conditional rule, not an omission here.",
      "published_kind": "conditional_or_referential",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "royal-oak"
    },
    {
      "id": "af137d63c9f0d568b324a9f9e173c90fb8d75f46354a96d82b64991992e80265",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "royse-city-tx",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "2c888993c9e8b304752124df31afdbe2d256fbebfe18c0d45d0e5b74edfb43a9",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "§ 4-4.D, 'MH' Zoning District Area Requirements table: 'Maximum Building Height 20 ft.' § 4-4.E: 'maximum building height ... as pertains to the \"MH\" district, shall conform to the provisions provided in the Area Requirements table.' Article 6, § 6-4.A.1: 'A nonresidential building may exceed the permitted height in a zoning district by 20 feet if' a site plan is provided and setbacks increase 1 ft per ft; § 6-4.A.2 allows greater height by special exception. § 6-4.B: 'Height regulations do not apply to steeples, domes, cupolas...'. § 6-4.I: public and quasi-public buildings up to 60 ft or 5 stories with increased yards.",
      "reason": "The 20 ft MH maximum matches the § 4-4 table exactly, and the citation to § 4-4 is correct. The qualification that Article 6 supplemental height rules can modify the limit for nonresidential structures and special cases is supported by § 6-4.A, B and I. One further provision is not mentioned: § 4-4.B lets MH land that is not developed as a manufactured home subdivision follow SF-2 rules (35 ft). That is an alternative development path, not a contradiction of the MH district standard, so it does not defeat the published assertions. The snapshot reference (table-007-1.png) cannot be checked but is nonmaterial.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "royse-city-tx"
    },
    {
      "id": "574c5578b49c7f1fafd22673d9d7241641a506b901e28fe29e35424f011d0c4b",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "san-marcos-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "c98519c3cb0ccdf66a214e04e794cddf31d2dbfd6ffdb7fb00f67329a23cc9bf",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "san-marcos-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "08a61850cd2feabe205cb1b575f6544c54157c0050955ca330b99564f70b52db",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "san-marcos-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "abefdc496c3f48e617bd9b313c2d65560735cd0a5a674573b136acd384e1636d",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "san-marcos-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "680885e46bc18dffbb1dbab34a74c97ce9f068f6275503fc433fec16517023da",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "san-marcos-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "bffe239d6715fbf072d2c57c817a24ebef81ce8d857781302a711dedf16f97d9",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "san-marcos-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "fad974ddc66c524a55685736ac23bd1d37eeefb13f9f2ed5004f19a3cd4d8904",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "san-marcos-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "5ba60628bcebaa63b9bc9be9b41c1d688ed7429368f59380d2009a9ff40c2cee",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "san-marcos-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "678b1e6b318377d9ab9c26877a3735ec272728cf5478bb26e69369abab747c29",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "san-marcos-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "c9e01966f043d8cc9b63b7d0c8d5521c797adaa8592ae50586960b4e53d6b188",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "san-marcos-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "c1d140f260a6c247f66a4407cfc795854a22a8a803b9ba9ceb70e2df53b4f47f",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "san-marcos-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "769a2e509299a5282643557ceba2ecc193946752c4d0dfa62057223b26841542",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "san-marcos-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "6bb91ae45207fc9020647ca8eafd353d90ecffcd91cd0a0e7a5dd5ac67d7a77a",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "san-marcos-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "96179405489bff9a3ee0af35992287d57a45ec09d63522c450dc604fbce190cb",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "san-marcos-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "baf6643adcb8e879be1853a8836e74734f3095ef9c11ce22db3817e82bd459b1",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "san-marcos-tx",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "a67cb76a0cc477287d8e53f7eac4e90cc89c46aad119d58a1e79a7bd4afe5384",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "The excerpt includes only the table-of-contents entries for Sec. 4.1 Farms (p. 4-4), Sec. 4.60 Animals (p. 4-24), Sec. 4.66 Medical Marihuana Uses (p. 4-31) and Sec. 5.32 Beekeeping Activities (p. 5-75). The operative text of those sections is not provided. The Code of Ordinances Sec. 14-652 (Ord. No. 304) is a separate instrument and is not in the source. The only use text shown is Sec. 3.24.A (p. 3-60): 'Unless a use is permitted in a particular zoning district, it shall be prohibited in that zoning district.'",
      "reason": "The source is inadequate for this statement. None of the published numbers or rules can be checked against operative text: 3 acres for horses, 3 acres for farms, the 10/20/16/6-ft hive standards, the 100 sq ft marihuana cap, L-M/H-M caregiver cultivation, and industrial-only grow businesses. The blind extractor marked source_sufficient=true, but it answered a different rule (the Sec. 3.24 listed-use principle) rather than the published assertions. The blind reading therefore gives no support, and the row cannot be scored.",
      "published_kind": "explicit_standard",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "shelby-township",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "cfb1b4be0f8b8d1b9c42702fd585d37a942da3c7c9462c5025105df725cb0c9d",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "shelby-township",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "c711fb10464f800b85b3ed029a247805445aa8a9a535120ceeec98f34237c100",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Sec. 3.13.E (p. 3-27): 'Minimum rear yard setback: 24 ft. Minimum side yard setback: Not abutting street or alley 20 ft. Abutting residential 30 ft.' Sec. 3.27.C table (p. 3-62), C-1 Building/Parking column: Arterial and Minor Arterial 105/70; Collector 88/53; Local 75/40. Footnote 2: 'The parking lot setback requirements noted above only apply to new development. Modifications to existing commercial sites which require site plan review shall provide a three foot high brick wall ... In lieu of a wall, the Planning Commission may accept an alternative treatment that introduces additional landscaping improvements...'",
      "reason": "Every published dimension and the footnote 2 qualification match the primary text. The C-1 column carries footnotes 2 and 3 only, so the footnote 1 25-ft residential increase does not apply. Some items are not mentioned but nothing is misstated: footnote 3 (Planning Commission discretion to vary the setback) and the cul-de-sac, freeway and private-road rows. The District Summary Table (p. xxiii) shows rear 20 and '20 abutting street or alley', which conflicts with the district page. The summary table defers to Article 3, so the district page governs.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "shelby-township"
    },
    {
      "id": "328697727a44698718ee36e1fff572d6337a8497410a780483d52c09d09b780b",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Sec. 3.15.B (p. 3-30): 'The following uses are permitted subject to the standard in Section 4.24.' Items listed: 1. Professional office buildings; 2. All principal uses permitted ... in the immediate abutting R-1-A, R-1-B, R-1-C, or R-2 residential districts; 3. General merchandise stores, department stores and variety stores; 5. Eating and drinking establishments, including fast-food restaurants and coffee shops with drive-thru windows; 6. Grocery stores and supermarkets; 7. Retail, general; 8. Pet shops; 9. Photographic studios; 10. Motion picture theaters, except drive-ins; 11. Art galleries; 12. Health and athletic clubs; 15. Hookah lounges w/license §4.67; 16. Amusement device centers §4.31; 17. Churches §4.4.",
      "reason": "Every use the publication names appears in Sec. 3.15.B. 'Abutting R-1-A through R-2' correctly covers R-1-A, R-1-B, R-1-C and R-2. The publication does not mention that these uses are 'subject to the standard in Section 4.24'. Sec. 4.24's content is not in the excerpt, so that omission cannot be shown to be material. The row does not claim to be an exhaustive list.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "shelby-township"
    },
    {
      "id": "bdfafecd32ecfca8c85b7376417f445b05c6e12a325b3f661141876f2b864f97",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Sec. 3.33.A.9.a (p. 3-75): 'In the O-1, O-2, C-1, C-2, C-3 and C-4 districts, maximum lot coverage shall be governed by meeting all requirements for yard space, landscaping, screening, off-street parking, loading and road rights-of-way.'",
      "reason": "The primary text explicitly names C-4 and states the same governing requirements as the publication. The citation is correct.",
      "published_kind": "conditional_or_referential",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "shelby-township"
    },
    {
      "id": "ed29b4dfe3e28c388b251605d8de31ccdcc8577a355c46f2e2cd5f8b8432457f",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Sec. 3.12.E (p. 3-25): 'Maximum lot coverage: Section 3.33.A.9'. Sec. 3.33.A.9.a (p. 3-75): 'In the O-1, O-2, C-1, C-2, C-3 and C-4 districts, maximum lot coverage shall be governed by meeting all requirements for yard space, landscaping, screening, off-street parking, loading and road rights-of-way.'",
      "reason": "The district page refers to Sec. 3.33.A.9, and that section names O-2 with exactly the requirements the publication lists. The citation is correct.",
      "published_kind": "conditional_or_referential",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "shelby-township"
    },
    {
      "id": "9576de21b2c435199f73010c435e263d220467721064a1ea0aa69cd790cc1a3a",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Sec. 3.5.D R-1-C Development Standards (p. 3-11): 'Distance Between Units Minimum distance: 14 ft.' and 'Building Height Maximum building height: 35 ft.'",
      "reason": "Both the 35-ft maximum height and the 14-ft minimum distance between units appear on the cited district standards page.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "shelby-township"
    },
    {
      "id": "197ccae1eb06ad6df48b61dc052ca97744c9edb21ab2152f34e0ae7d7eb02d6c",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Sec. 3.6.D R-2 Development Standards (p. 3-13): 'Maximum building height: 2 stories not to exceed 35 ft.'",
      "reason": "The publication matches the primary text exactly, and the citation is correct.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "shelby-township"
    },
    {
      "id": "b83d51fea2f8a3ba647803fc6c58d376c0a8b714bc775a09dd95c153f9526ae2",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Sec. 3.7.D R-3 to R-7 Development Standards (p. 3-15): 'Minimum lot area: 24,000 sq. ft. Minimum frontage: 100 ft.' Project Perimeter Setbacks: 'Minimum rear yard setback: 50 ft. Minimum side yard setback: 50 ft.' 'Maximum building height: 2 stories not to exceed 35 ft.' Maximum Density table: 'R-4 Multiple-Family 4 Dwelling Units' per acre.",
      "reason": "Every published figure matches the shared R-3 to R-7 standards page and the R-4 density row: lot area, frontage, perimeter setbacks, height and density.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "shelby-township"
    },
    {
      "id": "bc60cba7bd4808a6edd8b9c4ca7b01cb1d7386b2bb88ae5ab9e5299f4cc498bb",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "smyrna-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "b212dab7115df6372c58191880f50c67256e7c5ce66d7d2e730e8e026e523d81",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "smyrna-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "6964f98fd88ba34c34c99e567aff10160e64637916a59449191c6a0ccbe5f4d2",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "smyrna-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "04acbf475685ea45c13a1b1f20e1e74794bf4d11d93d655ff8014687010159b5",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "smyrna-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "f1e8b21d56bcfaa8abcbd13faa3b79524fe221f6a421f1c788aadbad16262edf",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "smyrna-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "e39879b6bf7ccf8b9a75f14e8f1e3a3d4e857d31ec1a6f5ed74e9c1eb967c0c8",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "smyrna-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "120ffef9aa1358326667a0152279ce35a77db5f1c64cc3e22c5e39d05499461b",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "smyrna-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "650d870c31d7d120f0a9da8e6c264873ec8fe6bce37048923c841c8c5ca3fbf2",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "smyrna-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "a2d2a0e1d225f24838f28c0bc12e25069d541e60794e61dd9ec1845f00af0f52",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "smyrna-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "b17e6be12f4728e987fda4b0da70bb4ac035be2f2709deaf1a395342b64a8c6e",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "smyrna-tn",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "579c41193eaa40c469815c76230fbbe385f87f79036797f01e97d6f907e4e008",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "southfield",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "acbc0c222fa91c4ea2cb857c5f43c3f77e2db968a8ced530daf0b8525e400e08",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Sec. 5.193 English table (p. 368), R 1 row: '9,000 70 25 2 40 8 20 35 1,000 30'. These are lot area per dwelling unit, minimum lot width, height in feet and stories, front, least side, total sides and rear yards, minimum floor area, and maximum coverage. Metric table (p. 369): 'R 1 837 21.35 ... 93 30'. Sec. 5.19: lot width is measured 'at the minimum required building line'.",
      "reason": "The source supports all three published figures: 9,000 sq ft lot area, 70 ft lot width and 1,000 sq ft minimum floor area. The metric equivalents agree, and the Article 22, Section 5.193 citation is correct. The Sec. 5.23(4) nonconforming-lot relief is a general exception, so leaving it out is not a material omission.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "southfield"
    },
    {
      "id": "f1f7b33fbac1de2ae9990eff48c7e9f613d835ea7732474a7865dc4f4e915fd6",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Sec. 5.66 (p. 235): 'the minimum usable floor area and the maximum percent of the area of a lot that one (1) family dwellings, together with accessory buildings, may occupy shall be as set forth in the \"S[chedule of Regulations]\"'. Sec. 5.193 (p. 368), R E row: '20,000 90 25 2 40 10 25 35 1,400 30'. The final column is maximum lot coverage in percent; the metric table (p. 369) also shows 30.",
      "reason": "Sec. 5.66 sends the coverage limit for one-family dwellings plus accessory buildings to the schedule, and the schedule gives 30 percent for R-E. The published rule states the 30 percent cap, the referral and the citations correctly.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "southfield"
    },
    {
      "id": "8ea4a4c34848c917df237d364bc9563fbf1cfafff76762b380295daa5f2e065b",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Sec. 5.193 English table (p. 368), R E row: '20,000 90 25 2 40 10 25 35 1,400 30'. Metric table (p. 369): 'R E 1860 27.45 7.625 2 12.2 3.05 7.625 10.675 130.2 30'.",
      "reason": "The source supports the published values: 20,000 sq ft lot area, 90 ft lot width and 1,400 sq ft minimum floor area, with matching metric equivalents. The blind answer first wrote 70 ft but corrected itself to 90 ft, so the two readings agree.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "southfield"
    },
    {
      "id": "1b8ffe29130f8c674621a18d5f165cf4a3a31a8c5c914e6b6fb3a774f44883f1",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "southfield",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "576e5dbd947e7957c342362cd26f717dd624ab2272980d15fdf6611b3466424e",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Sec. 5.81 (p. 248) describes the Multiple Family Residential Districts (Low Rise). Sec. 5.82: 'No building, structure or land shall be erected or used in an RM ... District unless the site plan therefor has been approved per the provisions of Section 5.22.' Sec. 5.83: '(1) All principal uses permitted in single family residence districts ... (2) Two family dwellings. (3) Multiple family dwellings not in excess of two (2) stories. (A) ... land-to-building ratio ... One (1) bedroom unit – 2,290 sf ...' Sec. 5.86 refers area and bulk to Article 22. Sec. 5.193 (p. 368), RM row: '1,500 2 acres 30 2 (a)(a)(a) (t) / 50 50 50'. Metric row (p. 369): '139.5 .81 Hectares 9.15 2'. The same column pattern appears in the RMM row ('3 acres 70 6'), confirming that 30 ft / 2 stories is the height column.",
      "reason": "Each published assertion is in the source: the low-rise intent, the site plan requirement, single-family, two-family and multiple-family uses not over 2 stories, the bedroom-based land-area ratios, the 2 acre development area and the 30 ft / 2 story height. The rule leaves out two qualifications in Sec. 5.83(1): single-family structures are exempt from site plan review, and single-family uses follow the most restrictive abutting district's requirements. Both are minor, so the rule is not materially wrong. The citations are accurate.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "southfield"
    },
    {
      "id": "e0332a544c4ac0d6d6ffcc60c4d2cf0b3f109a416bf5ab65779be1318480cd37",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "UDC §5.3, Table 5-1 (p. 5-2), C-2 column: Minimum Lot Area 10,000sf; Minimum Lot Width None; Maximum Gross Floor Area '5,000sf unless meeting the standards of Section 5.3.B'; Maximum Building Height 30'; Maximum Impervious Surface 80%; Front Setback None; Interior Side '5', unless abutting residential district, then 10''; Corner Side 10'; Rear '15', unless abutting residential district, then 25''. §5.3.B (pp. 5-1 to 5-2): in C-1 and C-2, additional GFA 'may be permitted during site plan review by the Planning Commission' if listed standards are met.",
      "reason": "Every published figure and qualification matches the C-2 column of Table 5-1. The GFA exception is correctly tied to the §5.3.B site-plan-review standards. The blind extraction agrees on all setback values.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "spring-hill-tn"
    },
    {
      "id": "2f868355324f338a2355e2e8d4fbd278746dda67a103d3b05d9b8a30ba8e2797",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "spring-hill-tn",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "b36f6cf5e536553a885c9c355c72fa12f4371007cd4194cb130ca8cdd1adb9fe",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "UDC §5.5.B, Table 5-3 (p. 5-6), C-D-E2 column: Minimum Lot Area None; Minimum Lot Width None; Maximum Building Height 40'; Minimum Building Height 14'; Maximum Impervious Surface 90%; Front Setback '0'-10' build-to zone'; Corner Side Setback '0'-10' build-to zone'; Interior Side and Rear 'None, unless abutting residential district, then 10'' / '15''.",
      "reason": "The height figures (40 ft max, 14 ft min) and all other stated bulk values match Table 5-3. The side/rear statement is general but accurate: setbacks apply only when abutting a residential district. Omitting the 60% build-to percentage and the existing-residential carve-out in §5.5.B is not material to the height topic.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "spring-hill-tn"
    },
    {
      "id": "db431bc634bf712697426564eea4f0be1a45a680432d058ffcb1b7deba0512cd",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "spring-hill-tn",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "655eea5d5795e3b0d1617c8cb7298d8acf5958bf40c31f6e69a98220089cf28a",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "spring-hill-tn",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "1fc7ddbb2ee621766174315de3750740dd546686037ec9a0d41cfd05217e449e",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "UDC §4.3, Table 4-1 (pp. 4-3 to 4-5), R-4 column (sixth value in each row): Minimum Lot Area 6,000sf; Minimum Lot Width 50'; Maximum Building Height 40'; Maximum Building Coverage 35%; Minimum Front Setback 'Build-To Zone: 20' to 25''; Minimum Interior Side 5'; Minimum Corner Side 10'; Minimum Rear 25'.",
      "reason": "The 40 ft maximum height matches the table, and every other stated value aligns with the R-4 position in each row. The front build-to-zone assignment depends on interleaved extracted text but is consistent with the column order. The blind extraction confirms the 40 ft height.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "spring-hill-tn"
    },
    {
      "id": "4ffc3b2da75d67ba1b0341ea3a931486a3aae40e12cb1e4ca2923486e5e79bd6",
      "status": "error",
      "error_class": "omission",
      "severity": "medium",
      "evidence": "R-5: Front build-to 20 to 25 feet [single-, two-, three-family]; townhomes 20 feet. Interior side 5 feet [single-family], 5 feet from side lot line or 10 feet between residential buildings [two-/three-family], none [townhomes]. Corner side 10 feet [single-/two-/three-family], none [townhomes]. Reverse corner side 20 feet; rear 25 feet.",
      "reason": "Visually inspected table continuation and townhome footnote. Published setbacks answer lists other bulk facts but omits all operative setbacks. Townhome individual-lot none cannot be construed as no site perimeter requirements.",
      "published_kind": "explicit_standard",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "spring-hill-tn",
      "district_code": "R-5",
      "topic": "setbacks",
      "decision": "confirmed_error",
      "original_assessment_status": "error",
      "original_error_class": "omission",
      "original_severity": "medium",
      "operative_quote": "R-5: Front build-to 20 to 25 feet [single-, two-, three-family]; townhomes 20 feet. Interior side 5 feet [single-family], 5 feet from side lot line or 10 feet between residential buildings [two-/three-family], none [townhomes]. Corner side 10 feet [single-/two-/three-family], none [townhomes]. Reverse corner side 20 feet; rear 25 feet.",
      "source_url": "https://www.springhilltn.org/DocumentCenter/View/10522/Unified-Development-Code--Revised-December-2025",
      "source_file": ".tmp/accuracy/source-bodies/spring-hill-tn/b94e760b96866e2f.pdf",
      "source_pdf_pages": [
        48,
        49,
        111
      ],
      "source_sha256": "197190cf5a6440db0ca8dbbf90345f319f4bee6f94def5f40e1ec5e65e29c67f",
      "proposed_replacement": "R-5 setbacks: single-, two- and three-family front build-to range 20 to 25 feet; individual townhome lots front 20 feet. Interior side: single-family 5 feet; two-/three-family 5 feet from side lot line or 10 feet between residential buildings; individual townhome lots none. Corner side: single-/two-/three-family 10 feet; individual townhome lots none. Reverse corner side 20 feet; rear 25 feet. Apply Section 8.3K.1 townhome/multifamily building-separation and perimeter-yard requirements in addition to the individual-lot entries.",
      "proposed_citation": "Table 4-1 (R-5), including continuation and townhome footnote; Section 8.3K.1",
      "publication_changed": false
    },
    {
      "id": "7b91bcea73b1855cfe0bbe4185a7c16dc3d4e13608827d6a54c84926f6b5133b",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "UDC §4.3, Table 4-1 (pp. 4-3 to 4-5), R-A column: Minimum Lot Area 2 acres; Minimum Lot Width 200'; Maximum Building Height 40'; 'Maximum Building Coverage ^' 20%; Minimum Front Setback 30'; Minimum Interior Side 25'; Minimum Corner Side 35'; Minimum Rear 100'.",
      "reason": "The 20% building coverage and every other stated value match the R-A column. Not reporting the separate 35% impervious-surface limit and the footnote ^ lot/site applicability does not make any published assertion false. Building coverage (§2.4.C) and impervious coverage (§2.4.I) are distinct defined standards.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "spring-hill-tn"
    },
    {
      "id": "16d5f526b4de468e893940cef43be1986da297a9cd7daa53e4f006ae0188a96d",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "UDC §4.4.A (p. 4-7): '1. The minimum area of a manufactured home park is five acres. 2. The maximum overall density of a manufactured home parks is four manufactured homes per gross acre.'",
      "reason": "Both the 5-acre minimum park area and the 4 homes per gross acre density match §4.4.A.1-2 and the cited section. The blind extraction agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "spring-hill-tn"
    },
    {
      "id": "4884b6c14de99b7a7ec0c1f05e34d4b188619374b64720f1e12d158fa491e276",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "UDC §6.3, Table 6-1 (p. 6-1): Minimum Lot Area 10,000sf (I-1, I-2, RD); Minimum Lot Width 100'; Maximum Building Height 50' / 50' / 80'; Maximum Impervious Surface 80%; Minimum Front Setback 30'; Minimum Corner Side 30'. For RD, Minimum Interior Side and Rear are '10', unless abutting a residential district, then: Structure 50' or less in height: 20'; Structure greater than 50' in height: 40''. I-1 uses 20' and I-2 uses 40' when abutting residential.",
      "reason": "All stated figures match Table 6-1. The residential-edge qualification is correctly described as varying by district and building height. It does not quantify the RD 20'/40' values, but it states nothing false and does not claim the standard is unavailable.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "spring-hill-tn"
    },
    {
      "id": "ad9a5af4b33537d3eedd32ba56d19b18b0c6ddc1be408d3787c69dd452e290f6",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "sterling-heights",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "0e5f6c57c0c2abe7e37d296ab0630d568d367467a5253779f81ff8d824f9eab1",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "sterling-heights",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "87784fbd64ed86f9dabef96f402cd1a5bc7261791042d8364c49b8549ba8a971",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "sterling-heights",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "b1d55b1ec320d595086b326de01d7d0d63a4a0d6d9651230d24e0afa4cbbc13b",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "surprise-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "c4a36df08b53a24cbecb14e5e4bad0e13ca9ea4e98d396f1a633bb3ceb940860",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "surprise-az",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "fbd2f811f965393e870bdf496fc88945bae330d4726f4286401aedd13e2a1920",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "troy",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "907d789eb00fdfcd252e549784192ba2fb5972dbcc3ed1bdf70f40ed3d2931c3",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "troy",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "e7853ca6d1bb63b8e0b8767b4dbc88e50b8937ddafe0a6a45dc41cd7c91530c2",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "wake-forest-nc",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "81216071566a5f03554b6d98e676635dfa26b648437b447db2e50968198f3db3",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "wake-forest-nc",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "ee4ae7c0f73f416061efdfa1563336932723d7cc6ef478350208eb885634562c",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "wake-forest-nc",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "719cc1fc07d467dbceff3697026f9e413100847ac1a5aa508babfbf4746b7a7e",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "wake-forest-nc",
      "unassessed_reason": "source_unavailable"
    },
    {
      "id": "f202be79666b88500b8ec45f01566d4c0a88679f2991f5a5ffef9b69629b17e1",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "App. A Sec. 3.16 (GR) district table: 'Parking Regulations As established by Section 4.03'. Sec. 4.03 use chart supplies use-specific ratios in its 'Parking Requirement' column, e.g. 'Retail Stores and Shops ... 1 space per 200 sq ft'.",
      "reason": "The published statement reproduces the operative GR cross-reference exactly, and the citation to Sec. 3.16 is correct. The blind reading agrees that the GR parking rule is a referral to Sec. 4.03 use-based ratios. Listing those ratios is optional elaboration, so leaving them out is not an omission.",
      "published_kind": "conditional_or_referential",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "waxahachie-tx"
    },
    {
      "id": "35e45d14d1788a9a39798d53d01a9566ef7ce50316c1e5a971a8f88ce71fa5a5",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "App. A Sec. 3.21 (HI) district table: 'Parking Regulations As established by Section 4.03'. Sec. 4.03(d) lists industrial ratios such as 'Heavy Manufacturing, Outdoor S 1/1,000 sq ft or 1 space per 2 emp'.",
      "reason": "The published text matches the HI cross-reference verbatim, and the citation is correct. The blind extraction agrees.",
      "published_kind": "conditional_or_referential",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "waxahachie-tx"
    },
    {
      "id": "a681a1798120fe90c4809285681a0e9cb4ab3d9313371d5fcfa84cd4db1c1336",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "App. A Sec. 3.19 (LI1) Area Regulations: 'Minimum Front Yard 40' Minimum Side Yard 30' Minimum Rear Yard 30''.",
      "reason": "All three yard dimensions match the LI1 table, and Sec. 3.19 sets no residential-adjacency increase for LI1. The citation is correct, and the blind reading agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "waxahachie-tx"
    },
    {
      "id": "4a4c8816be9b3d4c4f0c46ef9fd652f46c507058bd140b580a71fdc696fab581",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "App. A Sec. 3.20 (LI2): 'Height Regulations 6 stories'.",
      "reason": "The published maximum of 6 stories matches the LI2 table exactly, and the citation is correct. The blind reading agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "waxahachie-tx"
    },
    {
      "id": "0df5f5ff5433e42689e64a227b4ade63ff1525e653ee5e9c4950e455fec660e3",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "App. A Sec. 3.09 (MF2): 'Minimum Front Yard Adjacent to SF - 25'. 75' if over two stories. Adjacent to MF or Nonresidential - 25'. 100' if over 2 stories Minimum Side Yard Adjacent to SF - 50'. 75' if over two stories. Adjacent to MF or Nonresidential - 25'. 100' if over 2 stories Minimum Rear Yard Adjacent to a residential; 50', over two story is 75''.",
      "reason": "The published text reproduces every adjacency and height condition for the front, side and rear yards exactly as written in Sec. 3.09. The citation is correct, and the blind reading agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "waxahachie-tx"
    },
    {
      "id": "6753ec1afcacd40566bd327a86332e1778248eb3a8e84c3581c07bd94ac6a548",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "App. A Sec. 3.09 (MF2): 'Maximum Lot Coverage 40% by main and accessory buildings'.",
      "reason": "The published 40% coverage, counting main and accessory buildings, matches Sec. 3.09 exactly. The citation is correct, and the blind reading agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "waxahachie-tx"
    },
    {
      "id": "8808a61d5f5b30bf7dd2a0f1a4819f858b579e372c8a0f5c977305f484fa8f02",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "App. A Sec. 3.10 (MH) Area Regulations: 'Minimum Lot Area 3,000 SF per unit Minimum Lot Width 35' Minimum Lot Depth 80' ... Minimum DUA 650 SF'.",
      "reason": "All four published values (lot area, width, depth and dwelling unit area) match the MH table, and the citation is correct. The blind answer did not mention the 650 SF dwelling unit area, but Sec. 3.10 states it explicitly, so the published figure is supported.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "waxahachie-tx"
    },
    {
      "id": "b43f0cfb46b48faf14d51de66f397e95459fe91e53c404d3bd1eb3fd4fe2db9f",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "App. A Sec. 3.13 (MUNR): 'Maximum Lot Coverage 50% if 50% of parking for MF portion is provided by attached, enclosed garages. 50% maximum. Lower lot coverage to match percentage of attached, enclosed garages.'",
      "reason": "The published text is the source text verbatim; the doubled period is only a trivial punctuation difference. The citation is correct. The rule is a definite numeric cap with a stated reduction condition, so I classify the published answer as explicit_standard. The blind reading classified it as conditional, but it reads the same text and does not change the agreement.",
      "published_kind": "explicit_standard",
      "blind_kind": "conditional_or_referential",
      "municipality_slug": "waxahachie-tx"
    },
    {
      "id": "e54650f5fcdf87d0131d2cc9cbaba1e60818f8d5bbb13d0975317d486d380282",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "App. A Sec. 3.05 (SF2): 'Maximum Lot Coverage 50% by main and accessory buildings'.",
      "reason": "The published text matches Sec. 3.05 exactly, and the citation is correct. The Sec. 3.25 Infill Overlay allowance of 80% is a separate overlay rule, so not mentioning it is not an omission. The blind reading agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "waxahachie-tx"
    },
    {
      "id": "1c7468a8201df6f8857e447d9778b76091b802ff116faa5954739ee80468fff1",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "App. A Sec. 3.06 (SF3): 'Minimum Front Yard 30' Minimum Side Yard 10'; 15' on corner lots adjacent to a street Minimum Rear Yard 25''.",
      "reason": "The front, side (including the corner-lot qualifier) and rear yard values all match Sec. 3.06, and the citation is correct. The Sec. 2.01(b)(v)-(vi) carve-out for lots on pre-2018 plats is a normal exception, so not mentioning it is not a material omission. The blind reading agrees.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "waxahachie-tx"
    },
    {
      "id": "9265904fe02f3717286d55df023b698b060b57919303035858a55cd3bca90b99",
      "status": "unassessed",
      "error_class": null,
      "severity": null,
      "evidence": "",
      "reason": "Primary source unavailable or insufficient in the independent blind pass.",
      "published_kind": "unresolved",
      "blind_kind": "unresolved",
      "municipality_slug": "wylie-tx",
      "unassessed_reason": "insufficient_source"
    },
    {
      "id": "cd0143f9ec0c7d8754488e9622dee460e22729d1cf67037654d9c7ac8e259a66",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Sec. 4.1.C.3, Figure 4-3 Commercial Corridor District (CC): 'Front Yard Setback (feet) 25; Side Yard Setback (feet) 10; Rear Yard Setback (feet) 10''. Buffering and Screening: 'Nonresidential Use Adjacent to Single Family: Double Side and Rear Setback - 10' required landscaping w/screening'; 'Nonresidential Use Adjacent to Multifamily: Double Side and Rear Setback - 5' required landscaping w/screening'.",
      "reason": "The 25/10/10 ft setbacks, the doubled side and rear setbacks next to single-family or multifamily, and the landscaping-with-screening requirement all match Figure 4-3. The citation is correct. The row leaves out the 10 ft / 5 ft landscaping widths and the 'nonresidential use' qualifier, but it makes no false claim. The blind extraction agrees on every value and adds accessory-building setbacks that this row did not need to repeat.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "wylie-tx"
    },
    {
      "id": "8c83f41b78b4e1aa1002630875f6c9e55aa93940bd6da21b9ff1e853160839f5",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Sec. 4.1.B.3, Figure 4-2 Community Retail District (CR): 'Height of Main Structure (feet) 36; Number of Stories 2; Residential Proximity 3:1 slope from residential lot line'.",
      "reason": "The 36 ft and 2-story limits and the 3:1 residential-proximity slope match Figure 4-2 exactly. The citation is correct. The blind extraction agrees and adds accessory heights from Sec. 2.5.C.2.f, which are outside the scope of this row.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "wylie-tx"
    },
    {
      "id": "2f71a0c78196eb00fd4b3b0080828dec28274cf5048137103a08002b0786ae91",
      "status": "supported",
      "error_class": null,
      "severity": null,
      "evidence": "Sec. 3.2.A.3, Figure 3-3 Single Family 20 District (SF-20/26), Height of Structures: 'Main Structure (feet) 40; Accessory Structure (feet) 15'. Sec. 2.5.C.2.f(1): 'Accessory structures shall be limited to a height of not more than fifteen (15) feet on lots less than one acre and not more than twenty (20) feet on lots one acre or greater.'",
      "reason": "The 40 ft main and 15 ft accessory limits are transcribed correctly from the district-specific Figure 3-3, and the citation is correct. The blind extraction flags a possible conflict with the general Sec. 2.5.C.2.f rule allowing 20 ft on lots of one acre or more. The excerpt has no conflict-resolution rule, so treating 20 ft as controlling would be a guess. The published row faithfully states the district table and is not scored as an error.",
      "published_kind": "explicit_standard",
      "blind_kind": "explicit_standard",
      "municipality_slug": "wylie-tx"
    }
  ],
  "blind_answers": [
    {
      "id": "1949413172bdf5053ce1300b86955f786ac9b08b2579688073519084ac26bfa3",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "Unresolved. The general parking regulations in Sec. 9.04.043 (Parking, pp. 77-82) are not included in the supplied excerpts. Only fragments of Table 19 use-specific parking ratios are available. Table 18 says '--' means a minimum parking ratio is not required for that use. The sample ratios include: Single-Family Detached at 2/DU with a minimum of two covered spaces; Multifamily at 1/1-BR unit and 2/2- and 3-BR unit, plus 0.25/unit for visitors, with 50% of required parking covered (excluding visitor parking); and Hotel/Motel at 1.25/guestroom plus 1/200 sf of restaurant, retail, conference, or office area. Citywide parking rules cannot reliably be stated.",
      "citation": "Anna Zoning Ordinance Art. 9.04, Sec. 9.04.027(b)(1) Table 18; Sec. 9.04.028 Table 19; Sec. 9.04.043 (not provided)",
      "numeric_facts": [
        {
          "field": "single_family_detached_parking_min",
          "value": 2,
          "unit": "spaces per dwelling unit",
          "condition": "Table 19; minimum of two spaces covered"
        },
        {
          "field": "multifamily_visitor_parking",
          "value": 0.25,
          "unit": "spaces per unit",
          "condition": "Table 19, Multifamily Dwelling, in addition to 1/1-BR unit and 2/2- and 3-BR unit"
        },
        {
          "field": "multifamily_covered_share",
          "value": 50,
          "unit": "percent of required parking",
          "condition": "excluding visitor parking"
        }
      ],
      "evidence": "Table 18 (p.26): '\"--\" ... indicates that a minimum parking ratio is not required for a particular use.' Table 19 (pp.28-34) has a 'Parking Standards' column. Sec. 9.04.043 Parking (p.77) is listed in the Contents but its text is absent.",
      "limitations": "The document is incomplete. Sec. 9.04.043, which likely contains general parking standards, reductions, exceptions, dimensions, and district-specific rules (e.g., DT), was omitted. Use table pages 29-32 and 35-41 are also partly missing."
    },
    {
      "id": "9622419d2a5f73fd41c568c1db1c8905536469bb45a5fbbabfaa196d3a626bc0",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "There is no fixed use list for PD. Any use specified in a particular PD's granting ordinance is permitted in that PD. The ordinance may specify the size, location, appearance, and method of operation of uses as needed to ensure compliance with the Article's purposes. The granting ordinance must state the district(s) to which the PD's uses are most similar. It must also include a purpose and intent statement, a list of variances, and the reason for the PD. PD applications must list all requested variances with justification, or they are incomplete. A PD conforms to all other sections of the Article unless specifically exempted in the granting ordinance. A PD requires a minimum of 5 contiguous acres. All PD development must meet the site planning procedures.",
      "citation": "Anna Zoning Ordinance Art. 9.04, Sec. 9.04.026(b)-(d)",
      "numeric_facts": [
        {
          "field": "pd_minimum_area",
          "value": 5,
          "unit": "contiguous acres",
          "condition": "required to establish a PD district"
        }
      ],
      "evidence": "Sec. 9.04.026(b), p.24: 'Any use specified in a Planned Development (PD) district shall be permitted in that district.' (d)(1): standards 'shall be established in the ordinance granting the [PD] ... may include ... uses.' (d)(2): 'the particular district(s) to which uses specified in the [PD] are most similar shall be stated in the granting ordinance.' (d)(4): 'shall conform to all other sections ... unless specifically exempted in the granting ordinance.'",
      "limitations": "The actual permitted uses depend on each PD's individual ordinance, none of which is provided. The Table 19 use table excerpt has no PD column. Procedural PD rules in Division 5 were not provided. The cross-reference in (d)(5) is garbled as 'in 0.'"
    },
    {
      "id": "e83c0c7925eb0c601a200940c9aea9b6b4e35a5168a3377a450ac80df43da6ad",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "In the THOR overlay, the minimum front yard setback for nonresidential development is 50 feet. Related THOR dimensional standards: building lots along a Master Thoroughfare Plan highway must be at least one acre, and the nonresidential minimum lot width is 100 feet. THOR states no side, rear, or residential setback, so those come from the underlying base district; overlays add standards within a base district. Applicability: new development and redevelopment within the greater of a 500-foot buffer measured perpendicularly outward from the right-of-way, or to the back of abutting adjacent lots. This applies along the in-city portions of US 75, White Street (FM 455), Powell Parkway (SH 5), Sam Rayburn Memorial Highway (SH 121), and the Collin County Outer Loop. The Downtown (DT) district is exempt.",
      "citation": "Anna Zoning Ordinance Art. 9.04, Sec. 9.04.025(b)-(d); Sec. 9.04.006(a)(2)",
      "numeric_facts": [
        {
          "field": "front_setback_min",
          "value": 50,
          "unit": "feet",
          "condition": "nonresidential development within THOR overlay; DT exempt"
        },
        {
          "field": "lot_area_min",
          "value": 1,
          "unit": "acre",
          "condition": "building lots along a Master Thoroughfare Plan highway within THOR"
        },
        {
          "field": "lot_width_min",
          "value": 100,
          "unit": "feet",
          "condition": "nonresidential, within THOR"
        },
        {
          "field": "applicability_buffer",
          "value": 500,
          "unit": "feet",
          "condition": "from right-of-way of listed thoroughfares, or to back of abutting lots, whichever is greater"
        }
      ],
      "evidence": "Sec. 9.04.025(c)(3), p.24: 'The nonresidential minimum front yard setback is 50 feet.' (c)(1): lots along a highway 'shall be a minimum of one acre.' (c)(2): 'nonresidential minimum lot width is 100 feet.' (d): 'The Downtown (DT) District shall be exempt.' Sec. 9.04.006(a)(2): 'Overlay districts establish additional standards within a base district.'",
      "limitations": "Sec. 9.04.041 (Dimensional Regulations), which may contain setback exceptions or encroachment rules, was not provided. THOR sets no residential setback or side/rear setback, so those fall to the base district. Later amendments are not reviewed."
    },
    {
      "id": "a228afdb92fc2b4dc57acb240af73c08f1206396f3fdab2ff691a1fb8e49ed48",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "Special uses are only those uses designated as special uses in Sec. 4.2.2 Use Table, which is not in the provided text. The provided text establishes the Special Use Permit process. Designation as a special use does not guarantee approval. Each application is decided by the Board of Adjustment at a quasi-judicial public hearing, and a majority of members must vote to approve. The Board must find six things: (1) compatibility with surrounding uses; (2) compliance with the Sec. 4.4 Supplemental Standards; (3) no significant adverse impacts or nuisance, with adverse effects minimized; (4) minimized environmental impact; (5) no significant adverse impact on public facilities; (6) compliance with all other ordinance standards. The Board may impose conditions. The permit expires if the use is not initiated within 24 months, unless the permit sets a different time. One 12-month extension may be granted for good cause. Amendments follow the original approval procedure.",
      "citation": "UDO Sec. 2.3.5 (Article 2, pp. 46-48); Table 2.3.1 (p. 26)",
      "numeric_facts": [
        {
          "field": "special_use_permit_initiation_deadline",
          "value": 24,
          "unit": "months",
          "condition": "unless a different time is specified in the permit"
        },
        {
          "field": "special_use_permit_extension",
          "value": 12,
          "unit": "months",
          "condition": "one extension, on written request, for good cause, granted by the Board of Adjustment"
        }
      ],
      "evidence": "Sec. 2.3.5.B (p.46): 'Only those uses authorized as special uses in Sec. 4.2.2 Use Table may be approved with a Special Use Permit.' Sec. 2.3.5.F (p.47): 'not initiated within 24 months of issuance... shall expire.' Table 2.3.1: Special Use Permit — Planning Director/TRC R, Board of Adjustment D.",
      "limitations": "The Sec. 4.2.2 Use Table, which lists which uses are special in each district, is not provided. The specific special uses by district therefore cannot be identified. The Sec. 4.4 supplemental standards are also not provided."
    },
    {
      "id": "a09bb946038ced13b25139d1c8798016e2c7d7c9c10d66ec6d01f140d582f3ed",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "In HDSF, lot coverage is regulated as Maximum Built-Upon Area. The limit is 65% for duplexes, congregate living facilities, church or place of worship, day care, single family, townhouses, townhouses detached, and all other uses. Schools are allowed 70%. Watershed Protection Overlay rules (Sec. 6.1) may further limit these figures.",
      "citation": "UDO Sec. 5.1.1 Residential Districts table, HDSF rows (Article 5, p. 2)",
      "numeric_facts": [
        {
          "field": "max_built_upon_area",
          "value": 65,
          "unit": "percent",
          "condition": "HDSF all listed uses except School"
        },
        {
          "field": "max_built_upon_area",
          "value": 70,
          "unit": "percent",
          "condition": "HDSF School"
        }
      ],
      "evidence": "Sec. 5.1.1 HDSF rows, Max. Built-Upon Area (%)* column: Single Family '65'; All other uses '65'; School '70'. Footnote '*See Sec 6.1 Watershed Protection Overlay Districts.'",
      "limitations": "Sec. 6.1 watershed limits are not provided. Sec. 5.1 says the standards 'may be further limited or modified by other applicable sections.'"
    },
    {
      "id": "e1f3fa5b3caeb050585b681d860f665aa11fadb3e69fed7ec1ae9f92dd169156",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Maximum height in LD depends on use:\n- Single family: 40 ft.\n- Church or place of worship: 48 ft.\n- School: 5 stories and 75 ft.\n- All other uses: 36 ft.",
      "citation": "UDO Sec. 5.1.1 Residential Districts table, LD rows (Article 5, p. 1)",
      "numeric_facts": [
        {
          "field": "max_height",
          "value": 40,
          "unit": "feet",
          "condition": "LD single family"
        },
        {
          "field": "max_height",
          "value": 48,
          "unit": "feet",
          "condition": "LD church or place of worship"
        },
        {
          "field": "max_height",
          "value": 75,
          "unit": "feet",
          "condition": "LD school (and 5 stories)"
        },
        {
          "field": "max_height_stories",
          "value": 5,
          "unit": "stories",
          "condition": "LD school"
        },
        {
          "field": "max_height",
          "value": 36,
          "unit": "feet",
          "condition": "LD all other uses"
        }
      ],
      "evidence": "Sec. 5.1.1 LD rows, Max. Height (Feet) column: Church '48'; Single family '40'; School '5 stories and 75'; All other uses '36'.",
      "limitations": "The rules of measurement and height exceptions in Sec. 5.2 are not provided."
    },
    {
      "id": "4cc4d85e90441d1af40b5f5d1be57b465dd96f16722553e7b22510e1b80848af",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "In LD, single-family uses require a minimum average lot size of 10,000 square feet and a minimum lot width of 50 ft. Maximum gross density is 3 units per acre, and Sec. 5.2.3.B applies as an additional regulation. The table sets no lot size ('___') for church or place of worship, school, or all other uses. The LD purpose statement describes densities of up to three units per acre.",
      "citation": "UDO Sec. 5.1.1 Residential Districts table, LD rows (Article 5, p. 1); Sec. 3.3.1 LD purpose (Article 3, p. 3)",
      "numeric_facts": [
        {
          "field": "min_average_lot_size",
          "value": 10000,
          "unit": "square feet",
          "condition": "LD single family"
        },
        {
          "field": "min_lot_width",
          "value": 50,
          "unit": "feet",
          "condition": "LD single family"
        },
        {
          "field": "max_density",
          "value": 3,
          "unit": "gross units per acre",
          "condition": "LD single family"
        }
      ],
      "evidence": "Sec. 5.1.1 LD Single family row: '10,000 square feet | 50 | ... | 3 | Sec. 5.2.3.B'. Sec. 3.3.1: 'single family residential uses at densities up to three (3) units an acre.'",
      "limitations": "Sec. 5.2.3.B, which governs average lot size calculation, is not provided. Required buffers are not credited toward lot size in residential developments (Sec. 8.2.6.C ownership provisions)."
    },
    {
      "id": "c9b7c1633265bf659f060caa33f81c18e9331d1ee87e4e5a9a73089f0d949a3d",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "The provided text does not establish which uses are permitted in LI. Permitted uses are set by Sec. 4.2.2 Use Table, which is not included. The text does include the LI purpose statement: the district provides lands for 'certain types of businesses, light manufacturing, or processing uses.' The LI dimensional table names 'Regional Recreational Complex' as a separate use row, but a dimensional row does not establish that the use is permitted.",
      "citation": "UDO Sec. 3.3.3.A (Article 3, p. 4); Sec. 5.1.3 (Article 5, p. 4); Sec. 2.3.5.B references Sec. 4.2.2",
      "numeric_facts": [],
      "evidence": "Sec. 3.3.3.A: 'provide sufficient lands in appropriate locations for certain types of businesses, light manufacturing, or processing uses that might cause undesirable effects upon residential or commercial lands.'",
      "limitations": "The Sec. 4.2.2 Use Table is missing. A purpose statement is not a use permission."
    },
    {
      "id": "bf089bfe67da1631278452994b631a28685a034d7c6db6b8efb6e954f2b670a7",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Minimum setbacks in MH (front / side / rear / corner side):\n- Manufactured home: 25 / 8 / 25 / 15 ft.\n- Single family home: 25 / 8 / 25 / 15 ft.\n- School: 25 / 25 / 25 / 25 ft.\n- All other uses: 50 / 50 / 50 / 50 ft.\n\nWhere a landscape buffer is required along a property line, the building setback is the buffer width plus 10 ft. The exception is along Streetfront Type D buffers, where the Sec. 5.1 zoning setback applies. Vehicular use areas must also be set back 5 ft from any buffer.",
      "citation": "UDO Sec. 5.1.1 Residential Districts table, MH rows (Article 5, p. 2); Sec. 8.2.6.B.2 (Article 8, p. 28)",
      "numeric_facts": [
        {
          "field": "min_front_setback",
          "value": 25,
          "unit": "feet",
          "condition": "MH manufactured home or single family home"
        },
        {
          "field": "min_side_setback",
          "value": 8,
          "unit": "feet",
          "condition": "MH manufactured home or single family home"
        },
        {
          "field": "min_rear_setback",
          "value": 25,
          "unit": "feet",
          "condition": "MH manufactured home or single family home"
        },
        {
          "field": "min_corner_side_setback",
          "value": 15,
          "unit": "feet",
          "condition": "MH manufactured home or single family home"
        },
        {
          "field": "min_setback_all_sides",
          "value": 25,
          "unit": "feet",
          "condition": "MH school, front/side/rear/corner side"
        },
        {
          "field": "min_setback_all_sides",
          "value": 50,
          "unit": "feet",
          "condition": "MH all other uses, front/side/rear/corner side"
        },
        {
          "field": "buffer_setback_addition",
          "value": 10,
          "unit": "feet",
          "condition": "added to required buffer width along buffered property lines, except Streetfront D"
        }
      ],
      "evidence": "Sec. 5.1.1 MH rows: 'Manufactured home ... 25 8 25 15'; 'Single family home ... 25 8 25 15'; 'School ... 25 25 25 25'; 'All other uses ... 50 50 50 50'. Sec. 8.2.6.B.2: 'building setbacks ... determined by adding 10 feet to the buffer widths given in Table 1.'",
      "limitations": "Column order (Front, Side, Rear, Corner Side) is inferred from the table header in the PDF extraction. Sec. 5.2 measurement rules are not provided."
    },
    {
      "id": "fc275dcd8a44881d7aa6c4811d36e6aecd2c9b8d38c27b10e990b9bb19098c9b",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "Parking requirements are set by use, not by zoning district, so O&I has no district-specific ratio. Table 8.3-1 Schedule A applies, with Schedules B and C where referenced.\n\nRepresentative O&I-type uses:\n- Office, business or professional: 1 space per 300 sq ft, plus bicycle parking of 4 spaces or 1 per 8,000 sq ft, whichever is greater.\n- Medical or dental office or clinic: 1 per 200 sq ft of gross floor space, plus bicycle parking of 2 spaces or 1 per 20,000 sq ft, whichever is greater.\n- Government service: 1 per 300 sq ft, excluding vehicle storage areas.\n- Hospital: 1 per 2 beds plus 1 per employee.\n- Church or place of worship: 1 per 4 seats.\n- Unlisted commercial uses: 1 per 300 sq ft.\n\nOther rules that apply:\n- **Maximum parking:** spaces may not exceed the minimum by more than 25% for uses requiring up to 100 spaces, or 15% for uses requiring more than 100. Exceeding this requires a parking analysis and tree planting.\n- **Rounding:** fractions of 0.5 or less round down.\n- **Measurement:** areas are gross floor area, excluding accessory storage.\n- **Compact spaces:** up to 20% may be compact.\n- **Reductions:** tree planting (up to 10%), pedestrian access (10%), mixed use (10%), Director alternatives (up to 10%), shared and off-site parking within 600 ft.\n- **Placement:** no more than 50% of spaces may be between the building and the primary street, for lots over 35 spaces.\n- **Other requirements:** loading per Table 8.3-3, accessible spaces per Table 8.3-7, and EV charging per Table 8.3-9.",
      "citation": "UDO Sec. 8.3.1-8.3.11, Tables 8.3-1, 8.3-2, 8.3-7, 8.3-9 (Article 8, pp. 43-62)",
      "numeric_facts": [
        {
          "field": "min_parking_ratio",
          "value": 300,
          "unit": "square feet per space",
          "condition": "Office, business or professional"
        },
        {
          "field": "min_parking_ratio",
          "value": 200,
          "unit": "square feet per space",
          "condition": "Medical office or dental clinic or offices (gross floor space)"
        },
        {
          "field": "min_parking_ratio",
          "value": 300,
          "unit": "square feet per space",
          "condition": "Government service, excluding vehicle storage"
        },
        {
          "field": "max_parking_over_minimum",
          "value": 25,
          "unit": "percent",
          "condition": "uses requiring up to 100 spaces"
        },
        {
          "field": "max_parking_over_minimum",
          "value": 15,
          "unit": "percent",
          "condition": "uses requiring more than 100 spaces"
        },
        {
          "field": "max_compact_spaces",
          "value": 20,
          "unit": "percent",
          "condition": "only when extra spaces exceed the required minimum"
        },
        {
          "field": "ev_ready_spaces",
          "value": 15,
          "unit": "percent of required spaces",
          "condition": "Office, business or professional; 10+ spaces required"
        },
        {
          "field": "ev_charging_spaces",
          "value": 3,
          "unit": "percent of required spaces",
          "condition": "Office, business or professional"
        }
      ],
      "evidence": "Sec. 8.3.2.A: 'off-street motor vehicle and bicycle parking spaces shall be provided in accordance with Table 8.3-1.' Table 8.3-1: 'Office, business or professional 1 per 300 square feet.' Sec. 8.3.2.E: 'shall not be exceeded by more than 25%... or 15%.'",
      "limitations": "Table 8.3-1 does not differentiate by district. The CBD exemption does not apply to O&I as such. The answer depends on the specific use proposed."
    },
    {
      "id": "dd0a0b1755470f5be8965d234aae74906102be239aca5322be152c8634781e31",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "In TF, lot coverage is regulated as Maximum Built-Upon Area. The limit is 70% for both School and all other uses. Watershed Protection Overlay rules (Sec. 6.1) may further limit this figure.",
      "citation": "UDO Sec. 5.1.2 Business Districts table, TF rows (Article 5, p. 4)",
      "numeric_facts": [
        {
          "field": "max_built_upon_area",
          "value": 70,
          "unit": "percent",
          "condition": "TF school and all other uses"
        }
      ],
      "evidence": "Sec. 5.1.2 TF rows: 'School ... 5 stories and 75 | 70'; 'All other uses 20 20 20 20 48 70'. Footnote '*See Sec 6.1 Watershed Protection Overlay Districts.'",
      "limitations": "Sec. 6.1 watershed limits are not provided."
    },
    {
      "id": "b2e66fbec6545fc7ea5d0a99141e4fbf5fac732009f971ef25a8dcf54189d050",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "Not determinable from the supplied source. The document is the Birmingham Sign Ordinance, not the zoning ordinance's off-street parking provisions. It regulates only signs in the P (Parking) District: 9 sq ft per side, 18 sq ft total, 8 ft maximum height, illumination permitted, and no signs other than those designating entrance, exit and conditions of use. It contains no parking requirements, special parking provisions, or parking standards for any use or district.",
      "citation": null,
      "numeric_facts": [],
      "evidence": "Sec. 1.07 (p. 1-11): 'Parking District Signs. Permit: See Table C.' Table C (p. 1-18): 'Parking District Signs ... 9 square feet per side, 18 square feet total ... 8 feet ... No signs other than those designating entrance, exit and conditions of use.' Sec. 1.10.A (p. 1-14) defers building and site design to 'Article 3: Overlay District in the City of Birmingham Zoning Ordinance', which is not supplied.",
      "limitations": "The source is limited to sign regulation. The zoning ordinance's parking article is not included. Absence of parking standards here is not evidence of no regulation."
    },
    {
      "id": "cd2930bb46ffdd4999a689b7a2f2b45f530e99ccea84fc4f7e171d4374bb1fc9",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "Not determinable from the supplied source. The Sign Ordinance lists B2 (General Business District) only in the icon legend and contains no list of permitted uses for B2 or any other district.",
      "citation": null,
      "numeric_facts": [],
      "evidence": "Sec. 1.02 Icon Legend (p. 1-2): '- B2, General Business District'. No use tables or permitted-use lists appear anywhere in the document (pp. 1-1 to 3-6).",
      "limitations": "The zoning ordinance's district use regulations are not supplied. District applicability icons for each sign section did not survive extraction; the 'applies to the following districts:' lines are blank."
    },
    {
      "id": "22de0c9f98240557a3c60a6c0b588cd14e237dbfe3f1799ddbfb1f0e789c91c6",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "Not determinable from the supplied source. The Sign Ordinance contains no list of special land uses for R1. It refers to special land uses only in sign-specific contexts. First, the City Commission may permit additional bulletin board signs for public, charitable or religious institutions through a special land use permit. Second, the City Commission hears signs for special land uses after a Planning Board recommendation.",
      "citation": "Sign Ordinance Sec. 1.08.B.2; Sec. 2.02.A.2",
      "numeric_facts": [],
      "evidence": "Sec. 1.08.B.2 (p. 1-12): 'Additional bulletin board signs for public charitable or religious institutions ... may be permitted by the City Commission through a special land use permit.' Sec. 2.02.A.2 (p. 2-3): 'The City Commission shall hear and deny, approve, or approve with conditions, those signs for special land uses, after receiving the recommendation of the Planning Board.'",
      "limitations": "These provisions govern signs, not which land uses require special land use approval in R1. The zoning ordinance's R1 district regulations are not supplied. District applicability of Sec. 1.08 is not legible because the icons are missing."
    },
    {
      "id": "e6358cdc111b2cf156d1db8901221c39b8df7dc687cdf3d8f97e4bf33b0c2875",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "Not determinable from the supplied source. The Sign Ordinance names R8 (Attached Single-Family Residential District) only in the icon legend. It contains no minimum lot size, lot area, lot width or other dimensional lot standards for any district.",
      "citation": null,
      "numeric_facts": [],
      "evidence": "Sec. 1.02 Icon Legend (p. 1-2): '- R8, Attached Single-Family Residential District'. No dimensional or lot standards appear anywhere in the document.",
      "limitations": "The zoning ordinance's dimensional or lot standards for R8 are not supplied. Absence here is not evidence of no standard."
    },
    {
      "id": "a7cf0c0347af2a22cfc5ffc12fd112fe6d1c03ce4e00b9727868433dca7558a2",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "Cannot be determined from the provided excerpts. No accessory dwelling unit provision, definition, or use-table entry is included. The district tables only cap the number of accessory buildings (e.g., CD-2/CD-3L/CD-3: 2 max; CD-4/CD-4C/CD-5/CD-5C: 1 max; SD-MHP: 1 per site; SD-INT: 1 max) and accessory building height and setbacks. For uses, every district table points to Table 4.3.9.A-2 (Accessory Uses), which is not supplied.",
      "citation": null,
      "numeric_facts": [],
      "evidence": "District tables, e.g., Table 4.3.1-B p.57: 'Permitted Uses — See Table 4.3.9.A-1 ... Table 4.3.9.A-2 (Building, Lot & Building Site Accessory Uses)'; 'Accessory Buildings 2 max'. TOC p.45 lists 4.3.9 USES at p.213, which is not in the excerpts.",
      "limitations": "Section 4.3.9 and Tables 4.3.9.A-1/A-2, Article 6 supplemental standards, and Article 9 definitions (any ADU or accessory dwelling definition) are omitted. Accessory building counts are not the same as ADU permission or standards. Source text is incomplete."
    },
    {
      "id": "9b84bb3d7975ea7f318a5b1546994fe849e39720a944c3e427e59a8613f0f83c",
      "source_sufficient": true,
      "rule_kind": "no_standard",
      "answer": "The CD-3L district table expressly lists Impervious Surface Coverage as NR (not regulated); no maximum coverage is set. Related lot occupation cells: minimum Lot/Building Site Width 100 ft; Lot/Building Site Area NR; Frontage Buildout NR; 1 principal building max and 2 accessory buildings max. By contrast, CD-3 sets a 50% max, which shows this row is where the table imposes coverage limits.",
      "citation": "Columbia, TN Zoning Ordinance (Ord. 4400), Table 4.3.1-B (CD-3L District Standards), Lot Occupation, p.58",
      "numeric_facts": [
        {
          "field": "lot_width_min",
          "value": 100,
          "unit": "ft",
          "condition": "CD-3L Lot/Building Site Width"
        },
        {
          "field": "principal_buildings_max",
          "value": 1,
          "unit": "count",
          "condition": "per lot, CD-3L"
        },
        {
          "field": "accessory_buildings_max",
          "value": 2,
          "unit": "count",
          "condition": "per lot, CD-3L"
        }
      ],
      "evidence": "Table 4.3.1-B p.58, Lot Occupation: 'Impervious Surface Coverage NR'; 'Lot/ Building Site Area NR'; 'Frontage Buildout NR'; 'Lot/ Building Site Width 100 ft. min.' p.57: 'Principal Building 1 max; Accessory Buildings 2 max'. Compare Table 4.3.1-C p.67 (CD-3): 'Impervious Surface Coverage 50% max'.",
      "limitations": "The abbreviation NR is not defined in the excerpts. 'Not regulated' is inferred from usage, e.g., SD-HI p.140 spells out 'Not Regulated' for a cell shown as NR elsewhere. Section 4.3.3 (Lots & Building Sites), Article 6 supplemental standards, and Article 9 definitions are not supplied and could impose other coverage limits. Setbacks of 30 ft front, 12 ft side, and 30 ft rear also constrain buildable area. The table regulates impervious surface coverage, not building footprint coverage."
    },
    {
      "id": "6e41aa3d916b61229849ec021c6ebf73288c07eab75cee0686bff920975364ec",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "The specific permitted, conditional, or prohibited commercial uses in SD-INT cannot be determined. The SD-INT table refers to Table 4.3.9.A-1/A-2/A-3, which is not provided. The excerpts give only the district's intent and its permitted building types.\n\nThe intent is to serve the motoring public along I-65, primarily with automobile and other vehicular service establishments, transient sleeping accommodations, and eating and drinking establishments. The district may not be located in or adjacent to CD-3L or CD-3. It is limited to parcels within 3,690 ft of an interstate, freeway, or other limited-access highway.\n\nBuilding types:\n- Permitted: Commercial, Mixed Use, Flex, Mid-Rise, Large Multifamily, Large Scale Commercial, Live/Work, Civic.\n- Not permitted: House, Duplex, Townhouse, Small Multifamily.",
      "citation": "Columbia, TN Zoning Ordinance (Ord. 4400), Table 4.3.1-I (SD-INT District Standards), pp.121-122, 126",
      "numeric_facts": [
        {
          "field": "max_distance_from_limited_access_highway",
          "value": 3690,
          "unit": "ft",
          "condition": "SD-INT parcel location limit"
        },
        {
          "field": "min_parcel_size",
          "value": 1,
          "unit": "gross acre",
          "condition": "SD-INT"
        },
        {
          "field": "max_density",
          "value": 24,
          "unit": "density units per acre",
          "condition": "Development Parcels only"
        }
      ],
      "evidence": "p.121 General Description: 'Automobile and other vehicular service establishments, transient sleeping accommodations, and eating and drinking establishments to primarily characterize this District'; 'shall not be located in or Adjacent to a CD-3L or CD-3 District'. p.122: 'Permitted Uses — See Table 4.3.9.A-1 ...'. p.126 Building Types: 'Commercial P ... Large Scale Commercial P ... House NP'.",
      "limitations": "Table 4.3.9.A-1 (Principal Use), A-2, A-3, Table 5.1.7, and any use-specific standards are omitted. The General Description states intent and is not an operative use list. Building-type permissions do not establish which uses are permitted. Source text is incomplete."
    },
    {
      "id": "f36690f1bfe75ae822a4cfd1c7a7c0b0edf32e680ae94e6069b03f9a143a9143",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Home occupations are permitted by right as an accessory use in all residential zoning districts (§8.4.1.A) and in PUD, PRD and TND (§8.5.1). Only listed occupations or similar low-impact uses determined by the Administrator are allowed (§8.5.2). Listed occupations include accounting, legal, real estate, insurance, childcare/family day care home, tailoring, engineering/architecture, fine arts studio, lawn care, mail order (order taking only), music instruction, tutoring, office work, catering, and hair/nail salon (one chair maximum). §8.5.4 prohibits specified uses in residential districts, including medical/dental office, vehicle repair/display, retail sales, commercial food preparation (catering excepted), contractor shops, tattoo/piercing, therapy, and animal care/boarding. Table 8.6-1 performance standards: use must be clearly incidental and secondary to the residence; residential character must be unchanged; a full-time resident operator is required; a permit is required unless exempt; no more than 25% of the principal dwelling's gross floor area may be used. Client limits: no more than 6 clients/day, one visit per client per day, visits 8 AM–8 PM, and no more than 2 client vehicles at once. Lessons may have 12 or fewer clients/day; childcare limits follow N.C.G.S. 110-86(3)b and 110-91(7)b. Other standards: storage must be inside with no flammable, combustible or explosive materials; parking only in the driveway; no dust, odor, noise, vibration or electrical interference perceptible beyond the property line; deliveries normal for residences, Mon–Sat 8 AM–8 PM; one wall sign of at most 4 sq ft, flush-mounted and unlit. Additional standards marked only in the 'All other districts' (non-AG) column: conducted entirely inside the residence; no more than 1 non-resident employee; no outside storage of heavy equipment; no more than 3 resident-owned commercial vehicles; mechanized equipment only in an enclosed building; accessory buildings not used. §8.5.5 exempts certain home occupations (artists, craft work, home offices with no client visits, answering services) from the permit if all workers reside on the premises. Catering (§8.5.8): at most 25% of GFA, entirely within the dwelling (not a garage or accessory structure), no outdoor storage, 1 operator vehicle, and health agency approval required. A permit lapses on sale or rental of the dwelling, death of the operator, or 180 days of discontinuance (§8.5.7).",
      "citation": "CDO §8.4.1.A; §8.5.1–8.5.8; Table 8.6-1 (pp. 8-86, 8-94 to 8-100)",
      "numeric_facts": [
        {
          "field": "max_floor_area_share",
          "value": 25,
          "unit": "percent of principal dwelling GFA",
          "condition": "all districts"
        },
        {
          "field": "max_clients_per_day",
          "value": 6,
          "unit": "clients",
          "condition": "excluding lessons and childcare; 1 visit per client per day"
        },
        {
          "field": "max_client_vehicles_at_once",
          "value": 2,
          "unit": "vehicles",
          "condition": "excluding lessons and childcare"
        },
        {
          "field": "lesson_clients_per_day",
          "value": 12,
          "unit": "clients",
          "condition": "music, art, craft or similar lessons"
        },
        {
          "field": "max_nonresident_employees",
          "value": 1,
          "unit": "employees",
          "condition": "non-AG ('All other') districts per table column"
        },
        {
          "field": "max_sign_area",
          "value": 4,
          "unit": "sq ft",
          "condition": "one flush wall sign, unlit"
        },
        {
          "field": "max_commercial_vehicles",
          "value": 3,
          "unit": "vehicles",
          "condition": "non-AG districts; owned or operated by residents"
        },
        {
          "field": "salon_chairs",
          "value": 1,
          "unit": "chair",
          "condition": "hair or nail salon"
        },
        {
          "field": "permit_lapse_discontinuance",
          "value": 180,
          "unit": "days",
          "condition": "if not renewed within 30 days after notice"
        }
      ],
      "evidence": "§8.4.1.A table: 'Home Occupations (subject to § 8.5) — All Residential Zoning Districts'. §8.5.1: 'permitted as an accessory use in the districts shown in 8.4.1-A and in the PUD, PRD, and TND Districts.' Table 8.6-1: 'Not more than 6 clients/day ... Maximum of 2 client vehicles'; 'Not more than 25% of the gross floor area'; 'No more than one (1) non-resident employee'; sign 'Limited to one sign of four (4) square feet'.",
      "limitations": "Table 8.6-1 has AG and 'All other districts' columns; which column each 'x' belongs to is inferred from text-extraction positions. The exemption cross-reference to §5.12.7 was not provided. Childcare caps depend on external statutes. The document is not complete, so other articles (e.g., Article 14 definitions) were not reviewed."
    },
    {
      "id": "91a20d616af02d7ed82febd2993cddd586562053c4e7d9afd65243945ffca184",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "Unresolved. Use Table 8.1.8 governs (P = by right, PS = by right with §8.3 standards, S/SS = special use, blank = not allowed). In the extracted text, however, the table's column alignment is lost, so cells cannot be reliably attributed to the C-1 column. Partial, text-confirmed evidence for C-1 from outside the table: brewpubs and breweries-micro are allowed in C-1 subject to §8.3.5.O, and in C-1 a brewery-micro needs a street-oriented tap room of at least 500 sq ft. Internet/electronic gaming is allowed in C-1 only as an accessory use, limited to 4 machines (§8.3.5.L). Building material supply outdoor-storage standards apply in C-1 (§8.3.5.G). The district intent is 'indoor retail, service and office uses' (§7.5.11). Accessory uses follow §8.4.",
      "citation": "CDO §8.1.7–8.1.8 Use Table; §8.3.5.G, L, O; §7.5.11",
      "numeric_facts": [],
      "evidence": "§8.1.7.B: 'A blank cell in the use table indicates that a use is not allowed'. §7.5.11: 'The C-1 District is established to provide areas for indoor retail, service and office uses.' §8.3.5.L: 'C-1 (Light Commercial and Office) Districts as accessory uses'.",
      "limitations": "Use Table 8.1.8 text extraction collapses blank cells, so P/PS/S/SS entries cannot be mapped to the C-1 column with confidence. A complete permitted-use list for C-1 cannot be extracted reliably."
    },
    {
      "id": "f5603de238bb70c758390722efec7b445855af3359e2d0b0906d670de6558b31",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "The C-2 maximum building height is 48 ft. Under Note (1), height may increase 1 ft for each 1 ft of additional building setback, up to 200 ft; for Mixed Use, PUD, PRD or similar projects, setbacks are measured from the overall project boundaries. Residences in nonresidential districts follow RC standards, but their height may follow Note (1). Under Note (5), when residential units are on upper floors in C-2, the C-2 height limits govern. Height is measured from average natural grade along the foundation to the mid-point between eaves and ridge (gable/hip/gambrel roofs), the highest point of a mansard roof, or the top of a flat roof's coping (§7.6.2.D). Exempt from height limits: belfries, spires, chimneys, flagpoles, and similar features, and rooftop mechanical/elevator/water tank structures covering 33% of the roof area or less (§7.6.2.F). Airport Overlay limits may further restrict height (§7.6.2.E, §9.9). Mini-warehouses are limited to 48 ft (§8.3.6.E). Accessory structures are limited to 15 ft (§8.4.3).",
      "citation": "CDO Table 7.6.2-A and Notes (*), (1), (5); §7.6.2.D–F (Article 7 pp. 15–17)",
      "numeric_facts": [
        {
          "field": "max_building_height",
          "value": 48,
          "unit": "feet",
          "condition": "base C-2"
        },
        {
          "field": "max_building_height_with_added_setback",
          "value": 200,
          "unit": "feet",
          "condition": "+1 ft height per 1 ft additional setback (Note 1)"
        },
        {
          "field": "roof_appurtenance_coverage_exempt",
          "value": 33,
          "unit": "percent of roof area",
          "condition": "height-limit exception for rooftop structures"
        }
      ],
      "evidence": "Table 7.6.2-A row 'C-2 - - 0.8 30^ 50 100 48 (1)'; Note (1): 'Height may be increased by one foot for each one foot of additional building setback up to a maximum height of 200 feet.'",
      "limitations": "Airport Overlay height surfaces are only partly reproduced. Conditional district modifications are possible (§7.6.1.B)."
    },
    {
      "id": "2006d3c4e6abf728182490440b59c0db47721227bbd04e86fba5dd3c364cd88a",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "Unresolved. Table 7.6.2-A has no lot-coverage column. For CC, the 'Max. Impervious Surface Ratio' cell shows a dash, and the row shows dashes for all columns except height (75 ft, Note 4). Note * says residences in CC are not subject to maximum density or dimensional limitations. However, the CC district is also governed by Section 7.9 and urban design standards (§7.5.10 cites Section 10.7), and neither was provided. Watershed rules in Article 4 may also impose impervious limits. A no-standard conclusion therefore cannot be confirmed.",
      "citation": "CDO Table 7.6.2-A (CC row); §7.5.10; §8.3.5.O references to Section 7.9",
      "numeric_facts": [],
      "evidence": "Table 7.6.2-A row 'CC - - - - - - 75 (4)'; §7.5.10: 'urban design standards as set forth in Section 10.7 are required'.",
      "limitations": "The meaning of the dash in Table 7.6.2-A is not defined in the provided excerpt. CC-specific regulations (§7.9) and Article 4 watershed impervious limits are missing."
    },
    {
      "id": "9494a0164768bc78547d80f5feaf900e67348c668c4daed7b2746ec742b3c379",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "RL principal structure setbacks are: minimum front 35 ft, no maximum front setback, minimum interior side 15 ft, and minimum rear 30 ft. RL accessory structure setbacks are 5 ft (interior side) and 5 ft (rear). Qualifications:\n- Note (2): in new subdivisions, interior and street side setbacks may be reduced to accommodate rear- or side-loaded garages, or garages recessed at least 4 ft. One side may be reduced foot-for-foot as the other increases, but not below 5 ft.\n- Corner and through lots: the front setback applies from all abutting street rights-of-way (§7.6.2.B).\n- Reduced front setback: the front setback may drop to the average of developed lots within 300 ft fronting the same street (§7.6.2.C).\n- Encroachments (§7.6.2.A): bay windows 3 ft; chimneys 2 ft; HVAC 3 ft; eaves 2 ft; open steps 6 ft; uncovered decks/porches, but no closer than 5 ft to a property line.\n- Accessory structures on residential lots of 2 acres or less: not in the front yard; may occupy up to 30% of the required rear yard; at least 5 ft from side/rear lines; at least 36 in from the principal structure, or they are treated as additions (§8.4.2).\n- Accessory dwellings meet principal-structure setbacks (§8.3.3.C.6).\n- Cluster, PUD and PRD approvals may deviate from these setbacks (§7.7.3).\n- Recorded final plats may control (Note 1 / §9.12, for county-originated districts).",
      "citation": "CDO Table 7.6.2-B (RL row) and Notes; §7.6.2.A–C; §8.4.2",
      "numeric_facts": [
        {
          "field": "min_front_setback",
          "value": 35,
          "unit": "feet",
          "condition": "principal structure"
        },
        {
          "field": "min_interior_side_setback",
          "value": 15,
          "unit": "feet",
          "condition": "principal; reducible per Note 2 to no less than 5 ft"
        },
        {
          "field": "min_rear_setback",
          "value": 30,
          "unit": "feet",
          "condition": "principal structure"
        },
        {
          "field": "accessory_min_side_setback",
          "value": 5,
          "unit": "feet",
          "condition": "accessory structures"
        },
        {
          "field": "accessory_min_rear_setback",
          "value": 5,
          "unit": "feet",
          "condition": "accessory structures"
        }
      ],
      "evidence": "Table 7.6.2-B row 'RL 35 - 15(2) 30 5 5' under columns Min. Front / Max. Front / Min. Interior Side(2) / Min. Rear (principal) / Min. Interior Side / Min. Rear (accessory).",
      "limitations": "Column assignment is reconstructed from the extracted header order. Street-side setback has no separate column. Articles 4 and 11 (buffers, watershed) may add requirements."
    },
    {
      "id": "ce6b3c559108d6986dbb3ec0d9266971d67e22bc8c337d15666df9194b1e77f0",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "RM-2 principal structure setbacks are: minimum front 25 ft, no maximum front setback, minimum interior side 10 ft, and minimum rear 25 ft. RM-2 accessory structure setbacks are 5 ft (interior side) and 5 ft (rear). Qualifications:\n- Note (2): side setbacks may be reduced in new subdivisions for rear-, side-loaded or recessed garages (one side reduced foot-for-foot as the other increases), but not below 5 ft.\n- Corner and through lots: the front setback applies from all street rights-of-way (§7.6.2.B).\n- Reduced front setback: the front setback may be reduced to the average of developed lots within 300 ft (§7.6.2.C).\n- Encroachments per §7.6.2.A: uncovered decks/porches no closer than 5 ft to a property line.\n- Accessory structures (§8.4.2): not in the front yard on lots of 2 acres or less; at most 30% of the required rear yard; at least 5 ft from side/rear lines; at least 36 in from the principal structure.\n- Accessory dwellings meet principal setbacks (§8.3.3.C.6).\n- Duplex and alternative single-family lot patterns (Table 7.6.2-A ** note; §7.7.3–7.7.4) and PUD/PRD/cluster approvals may deviate from these setbacks.",
      "citation": "CDO Table 7.6.2-B (RM-2 row) and Notes; §7.6.2.A–C; §8.4.2",
      "numeric_facts": [
        {
          "field": "min_front_setback",
          "value": 25,
          "unit": "feet",
          "condition": "principal structure"
        },
        {
          "field": "min_interior_side_setback",
          "value": 10,
          "unit": "feet",
          "condition": "principal; reducible per Note 2 to no less than 5 ft"
        },
        {
          "field": "min_rear_setback",
          "value": 25,
          "unit": "feet",
          "condition": "principal structure"
        },
        {
          "field": "accessory_min_side_setback",
          "value": 5,
          "unit": "feet",
          "condition": "accessory structures"
        },
        {
          "field": "accessory_min_rear_setback",
          "value": 5,
          "unit": "feet",
          "condition": "accessory structures"
        }
      ],
      "evidence": "Table 7.6.2-B row 'RM-2 25 - 10(2) 25 5 5'.",
      "limitations": "Column assignment is reconstructed from the extracted header. Setbacks for any multifamily or attached housing in RM-2 (§7.7.4, §7.8) were not fully provided. Buffer yards under Article 11 may add requirements."
    },
    {
      "id": "2b508f635ee2ffe5e048011fa0272257c698c31134ee6e263780be999a61e428",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Agricultural (A): maximum lot coverage is 20% for all buildings on the lot. For accessory structures, the total combined area of all structures may not exceed the district's maximum lot coverage. A 10% increase in the lot coverage standard may be allowed to accommodate a detached accessory dwelling unit.",
      "citation": "Fate UDO Art. III, Sec. 3.2.2, Figure 3.2-2 (Agricultural Dimensional Standards), p. 6; Art. IV Secs. 4.3.5(1)(b)-(c), 4.3.5(1)(c)(iv)(b), 4.3.6(6)(b)",
      "numeric_facts": [
        {
          "field": "max_lot_coverage_all_buildings",
          "value": 20,
          "unit": "percent",
          "condition": "A district, all buildings on the lot"
        },
        {
          "field": "lot_coverage_increase_for_detached_adu",
          "value": 10,
          "unit": "percent",
          "condition": "may be allowed to accommodate a detached accessory dwelling unit (Sec. 4.3.6(6)(b))"
        }
      ],
      "evidence": "Figure 3.2-2: 'Lot Coverage Percentage ... All buildings on the lot (max) 20%'. Sec. 4.3.5(1)(c)(i): 'The total combined area of all structures shall not exceed the maximum lot coverage for the zoning district.' Sec. 4.3.6(6)(b): 'A 10% increase in the lot coverage standard may be allowed to accommodate the detached accessory dwelling unit.'",
      "limitations": "The table text extraction is misaligned: 'NA (min)' values sit next to the Lot Coverage label. Those values appear to belong to the lot width and depth rows. The 20% value is clearly labeled 'All buildings on the lot (max)'. The text does not say whether the ADU increase is 10 percentage points or 10% of the 20% standard. Whether detached ADUs are allowed in A cannot be confirmed because the symbols in Table 4.3-1 are missing from the extracted text."
    },
    {
      "id": "54821031d086711b33786480143cb808ff6edd36a36d3c1e9ed989b3fac72d74",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Heavy Industrial (IND) setbacks:\n- Front on a freeway, freeway frontage road, or arterial roadway: minimum 20 ft, no maximum.\n- Front on all other streets: minimum 20 ft, no maximum.\n- Side: minimum 40 ft.\n- Rear: minimum 40 ft.\n\nRelated requirements:\n- Outside storage associated with an industrial use must be set back at least 25 ft from any public right-of-way and placed in the rear yard behind an 8-ft solid screen.\n- Any side or rear lot line adjacent to a Major Creek requires a 25-ft building setback.\n- The purpose statement says the district is intended to be located at least 300 ft from residential neighborhoods. This is a statement of intent, not a stated setback.",
      "citation": "Fate UDO Art. III, Sec. 3.3.5, Figure 3.3-8 (Heavy Industrial Dimensional Standards), p. 28; Art. IV Sec. 4.2.4(27); Art. V Sec. 5.6.5(8)",
      "numeric_facts": [
        {
          "field": "front_setback_min",
          "value": 20,
          "unit": "feet",
          "condition": "on freeway, freeway frontage road, or arterial roadway"
        },
        {
          "field": "front_setback_min",
          "value": 20,
          "unit": "feet",
          "condition": "on all other streets"
        },
        {
          "field": "side_setback_min",
          "value": 40,
          "unit": "feet",
          "condition": "all sides"
        },
        {
          "field": "rear_setback_min",
          "value": 40,
          "unit": "feet",
          "condition": "all rear"
        },
        {
          "field": "outside_storage_setback_min",
          "value": 25,
          "unit": "feet",
          "condition": "outside storage associated with an industrial use, from any public right-of-way"
        },
        {
          "field": "major_creek_setback_min",
          "value": 25,
          "unit": "feet",
          "condition": "side or rear lot line adjacent to a Major Creek"
        }
      ],
      "evidence": "Figure 3.3-8: '3 Front: On Freeway, Freeway Frontage Road, or Arterial Roadway (min) 20 ... (max) NA; On All Other Streets (min) 20 ... (max) NA; 4 Side: (min) 40; 5 Rear: (min) 40'. Sec. 4.2.4(27): 'set back a minimum of 25 feet from any public right-of-way and shall be located within the rear yard'. Sec. 5.6.5(8): 'twenty-five-foot (25') building setback'.",
      "limitations": "The front maximum is 'NA', meaning no maximum is stated. Telecommunication tower placement rules (Sec. 4.2.4(32)) and accessory building setbacks (Sec. 4.3.6(1)(d)) can also apply, depending on the use."
    },
    {
      "id": "d1fcb46704c4408353cba77065dd53688b1cbb63a03a56d552fa2193dadac399",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "Cannot be determined reliably. The permitted-by-right and Specific Use Permit symbols in Table 4.1-1 (Table of Allowed Uses) did not survive text extraction, so the NT column cannot be read.\n\nWhat the text does establish:\n- Purpose: NT is intended for smaller-lot residential and commercial uses compatible with mixed-use development.\n- Single-family detached lots in NT may not exceed 40 ft in width (Sec. 4.2.1(1)(a)).\n- Uses not listed in the table are prohibited unless the Administrator interprets them as similar to a listed use (Sec. 4.1.1).",
      "citation": "Fate UDO Art. IV Sec. 4.1.5, Table 4.1-1 (pp. 3-25); Art. III Sec. 3.5.6 (Purpose); Art. IV Secs. 4.1.1, 4.1.2, 4.2.1(1)(a)",
      "numeric_facts": [
        {
          "field": "sf_detached_lot_width_max",
          "value": 40,
          "unit": "feet",
          "condition": "single-family detached dwelling lots in NT"
        }
      ],
      "evidence": "Sec. 4.1.2(1)-(3) defines symbols '' (permitted by right), '' (SUP), and blank (prohibited), but the glyphs render empty throughout Table 4.1-1. Sec. 4.2.1(1)(a): 'In the MUT and NT zones, single family detached residential lots shall not exceed 40 feet in width.' Purpose, Sec. 3.5.6: 'smaller lot residential and commercial uses compatible with the mixed-use development.'",
      "limitations": "Table 4.1-1 is unusable because its permission symbols are missing. Only asterisk markers survived, and their column alignment is ambiguous. The same problem affects the accessory use table (Table 4.3-1) and the home-based business table (Table 4.3-3). The original PDF table is needed to answer this."
    },
    {
      "id": "7dddceb8ee2150db48ca423f708f7e7cd6151141da170e9074721616fca14591",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Old Town Core (OTC) height:\n- Minimum: 2 stories, except single-family detached residential.\n- Maximum: 4 stories or 55 ft. More than 4 stories ('5+') is possible with a Specific Use Permit.\n- Along the Priority Downtown Corridor (W E Crawford Avenue, from I-30 to TX 66), the design corridor standard is 2 stories minimum and 4 stories maximum.\n- Accessory structures are limited to 12 ft at the minimum setback line. Height may rise 1 ft for every 2 ft of additional setback. They may never exceed the primary structure's height or 24 ft.",
      "citation": "Fate UDO Art. III, Sec. 3.5.7, Figure 3.5-14 (Old Town Core Dimensional Standards), p. 47; Sec. 3.5.3(4), Table 3.5-1; Art. IV Sec. 4.3.5(4)",
      "numeric_facts": [
        {
          "field": "min_stories",
          "value": 2,
          "unit": "stories",
          "condition": "except single-family detached residential"
        },
        {
          "field": "max_stories",
          "value": 4,
          "unit": "stories",
          "condition": "by right; 5+ with SUP"
        },
        {
          "field": "max_height",
          "value": 55,
          "unit": "feet",
          "condition": "stated alternatively as '4 or 55''"
        },
        {
          "field": "downtown_corridor_max_stories",
          "value": 4,
          "unit": "stories",
          "condition": "Priority Downtown Corridor (W E Crawford Ave, I-30 to TX 66)"
        },
        {
          "field": "downtown_corridor_min_stories",
          "value": 2,
          "unit": "stories",
          "condition": "Priority Downtown Corridor"
        },
        {
          "field": "accessory_structure_max_height",
          "value": 24,
          "unit": "feet",
          "condition": "absolute cap; 12 ft at minimum setback line, +1 ft per 2 ft added setback, not above primary structure"
        }
      ],
      "evidence": "Figure 3.5-14 Building: '6 Stories (min) 2, except for single-family detached residential; Stories (max) 4 or 55'; 5+ with SUP'. Table 3.5-1 Downtown Corridor: 'Building Height (min/max) 2 stories/4 stories'. Sec. 4.3.5(4): accessory structures 'in no instance shall ... exceed 24 feet in height.'",
      "limitations": "The two-column table layout is scrambled. The values are assigned here by row order and by analogy to the MU and MUT tables ('5 or 65 feet / 6+ with SUP'). The text does not say whether '4 or 55'' means whichever limit is more restrictive. It also does not say how height is measured (to eave or to roof). Telecom tower limits are not covered here."
    },
    {
      "id": "703caee380ce69ce0811ee404b5932e37bbc7aa410e85d300faac3a036751876",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "The UDO sets no fixed per-lot minimum or maximum lot size for the Planned Development (PD) district. The only size rule it states is that a Planned Development must be at least 10 acres.\n\nLot dimensions come from each PD's adopting ordinance and Concept/Development Plan, which may reference a base district. If a PD's regulations do not address a standard, the UDO's standards apply. PDs approved before the UDO keep the standards in their own ordinance while their approvals remain valid.",
      "citation": "Fate UDO Art. III Sec. 3.5.8(A)-(B), p. 50; Art. III Sec. 3.5.2(1); Art. IV Sec. 4.1.2(5); Art. I Sec. 36-1.7.1(5)(c)",
      "numeric_facts": [
        {
          "field": "pd_district_min_area",
          "value": 10,
          "unit": "acres",
          "condition": "minimum size of a Planned Development (development/district, not individual lot)"
        }
      ],
      "evidence": "Sec. 3.5.8(B)(1): 'Planned Developments shall be 10 acres minimum.' Sec. 3.5.8(A): the PD is 'an alternative to the base zoning districts'. Sec. 1.7.1(5)(c): 'If the Planned Development regulations do not contain or are silent to certain standards, then the standards of this Ordinance shall apply.' Sec. 3.5.2(1): a Concept Plan is required for any Special District zoning request.",
      "limitations": "The 10-acre minimum applies to the whole PD, not to individual lots. The Article III text ends at Sec. 3.5.8(B)(3) on p. 50. Any later PD subsections (such as development standards) are not in the provided text. Actual lot sizes depend on the specific PD ordinance, which was not provided."
    },
    {
      "id": "af5a5736ff2a3d2fb71a71ba43e2022cbb5fcbf7e95f6e79a212565233a57695",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "2F maximum lot coverage for two-family/duplex homes is 45%, counting main buildings and accessory buildings. Single-family lots and detached dwellings built in 2F must instead conform to SF-8 standards, and SF-8 sets maximum lot coverage at 40% by main and accessory buildings.",
      "citation": "Forney Zoning Ordinance §22.4.C (p.74); §22.5.A (p.74); §19.4.C (p.63)",
      "numeric_facts": [
        {
          "field": "max_lot_coverage",
          "value": 45,
          "unit": "percent",
          "condition": "two-family/duplex homes; main and accessory buildings"
        },
        {
          "field": "max_lot_coverage",
          "value": 40,
          "unit": "percent",
          "condition": "single-family detached lots/dwellings in 2F (via SF-8 standards)"
        }
      ],
      "evidence": "§22.4.C (p.74): \"Maximum Lot Coverage for Two-Family/Duplex Homes - forty-five percent (45%) by main buildings and accessory buildings\". §22.5.A: \"Single-family lots and detached dwellings constructed in this district shall conform to the standards as set forth in the SF-8 zoning district.\" §19.4.C (p.63): \"Forty percent (40%) by main buildings and accessory buildings.\"",
      "limitations": "2F is a transitional district: no new property may be zoned 2F. Section 43 supplemental regulations were not reviewed in full because the excerpt is incomplete. No impervious-coverage limit is stated for 2F."
    },
    {
      "id": "f0951aa27cd444e4b860b5f81232d3175f4b9a51c2d80e89a3981d1b6a2bba2b",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "The CBT overlay has no use list of its own. Uses allowed as P or C in the base zoning district (Section 37) are allowed, and conditional uses must go through the CUP procedures in §34b. Open storage is prohibited in CBT. Temporary outdoor retail sales follow the CBD standards. CBT properties zoned GR or MU also fall within the ENT overlay. In ENT, on-premise alcoholic beverage sales are a permitted use if the §34d.5 requirements are met. A private club must be at least 300 ft from any church, school, child care center, or hospital, and must earn at least one-third of gross receipts from food.",
      "citation": "§34c.2 (p.125); §34c.5.D–E (p.128); §34d.2.B, §34d.5.B–C (pp.129–130)",
      "numeric_facts": [
        {
          "field": "private_club_min_separation",
          "value": 300,
          "unit": "feet",
          "condition": "ENT overlay (CBT properties zoned GR/MU); from church, school, child care center, hospital"
        },
        {
          "field": "private_club_min_food_receipts_share",
          "value": 33.3,
          "unit": "percent",
          "condition": "ENT overlay; one-third of gross receipts in any consecutive 12 months"
        }
      ],
      "evidence": "§34c.2: \"Those uses allowed as 'P' or 'C' in the base zoning district (see Section 37). Conditional uses must be approved utilizing procedures set forth in Section 34b.\" §34c.5.D (p.128): \"Open storage is prohibited in the CBT district.\" §34d.5.B (p.130): \"Properties within the CBT (Central Business Transition) Overlay that are zoned GR or MU.\"",
      "limitations": "Allowed uses depend on the base district, which this question does not specify. The Section 37 use charts are garbled in the extraction and truncated after p.180. Site plan and façade approval are required for new construction or redevelopment."
    },
    {
      "id": "bff3fa8eea6fd1e6058707b28f2fd5f8c088adc202548e6180221a4a104282b8",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "GR maximum height is 70 ft. Any structure above 36 ft requires a Conditional Use Permit (CUP). Height is measured as the vertical distance from grade plane to the average height of the highest roof surface. Accessory buildings are limited to 1 story. Other height rules are referenced in §43.4. Side and rear yards adjacent to a residential district increase with building height: 20 ft for a one-story building, plus 20 ft for each additional story or fraction of a story.",
      "citation": "§29.3.A (p.96); §29.4.B.4 (p.97)",
      "numeric_facts": [
        {
          "field": "max_height",
          "value": 70,
          "unit": "feet",
          "condition": "main structures"
        },
        {
          "field": "cup_required_above_height",
          "value": 36,
          "unit": "feet",
          "condition": "any structure above 36 ft requires CUP"
        },
        {
          "field": "max_accessory_height",
          "value": 1,
          "unit": "stories",
          "condition": "accessory buildings"
        }
      ],
      "evidence": "§29.3.A.1: \"Seventy feet (70'). Any structure above thirty-six feet (36') in height shall require a Conditional Use Permit (CUP). The building height is measured as the vertical distance from grade plane to the average height of the highest roof surface.\" §29.3.A.2: \"One (1) story for accessory buildings.\"",
      "limitations": "The text of §43.4 (special height regulations) is not in the provided excerpt."
    },
    {
      "id": "26f4c82d9deff46128b6e2b81429ba5bdb46a770a3daf2605d9a591d3dfd1b1d",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "HOZ is an overlay that relies on the underlying base zoning to identify allowable uses. It does not change, replace, or alter the base zoning designation, and base-district regulations apply except where HOZ provisions conflict with them. The provided excerpt shows no HOZ-specific use list. A separate section prohibits outdoor vending machine installations in historic overlay districts.",
      "citation": "§34e.2 (p.131); §34e.3.E (p.132); §43.12.B.2 (p.237)",
      "numeric_facts": [],
      "evidence": "§34e.3.E (p.132): \"The HOZ District relies upon the existing Base Zoning of property within the HOZ District to identify allowable uses and provide the basic standards for such allowed uses. The HOZ District does not change, replace or alter the underlying Base Zoning Designation.\" §43.12.B.2: \"Outdoor vending machine installations are prohibited in all zoning districts, planned development districts and historic overlay districts.\"",
      "limitations": "Pages 135–166 of §34e are omitted from the excerpt and could contain use-related restrictions, such as demolition or relocation controls. The base district is unspecified, and the Section 37 charts are garbled and truncated. HOZ is not listed among the overlay districts in §13.1."
    },
    {
      "id": "531702964cc749fd8ee278b50803e661291b9e3508ac3399a17b7a06a95f9273",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "LI maximum lot coverage is 60%, counting main and accessory buildings. Maximum impervious coverage is 90%, counting all buildings, parking areas, sidewalks, and similar surfaces. Maximum FAR is 2:1.",
      "citation": "§33.4.C–D (p.113)",
      "numeric_facts": [
        {
          "field": "max_lot_coverage",
          "value": 60,
          "unit": "percent",
          "condition": "main and accessory buildings"
        },
        {
          "field": "max_impervious_coverage",
          "value": 90,
          "unit": "percent",
          "condition": "all buildings, parking areas, sidewalks, etc."
        },
        {
          "field": "max_far",
          "value": 2,
          "unit": "ratio",
          "condition": "2:1"
        }
      ],
      "evidence": "§33.4.C: \"Maximum Lot Coverage – Sixty percent (60%) including main and accessory buildings; maximum ninety percent (90%) impervious coverage (including all buildings, parking areas, sidewalks, etc.)\"",
      "limitations": "Open storage is separately capped at 20% of lot area (§33.5.E); this is not a coverage limit."
    },
    {
      "id": "88650b5e637f1f74df2573e95d75ec0ca33e29083dd85eba851bac690b7fe835",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "MF-15 maximum lot coverage is 45% in total, counting main and accessory buildings. Related requirements: usable open space must be at least 15% of total lot area, and at least 20% of total lot area must be landscaping (pervious surface) plus usable open space. Single-family, duplex, patio home, or townhouse units built in MF-15 must follow SF-8, 2F, SF-PH, or SFA standards respectively.",
      "citation": "§24.4.D (p.81); §24.5.A–B, G (p.82)",
      "numeric_facts": [
        {
          "field": "max_lot_coverage",
          "value": 45,
          "unit": "percent",
          "condition": "total, main and accessory buildings"
        },
        {
          "field": "min_usable_open_space",
          "value": 15,
          "unit": "percent",
          "condition": "of total lot area"
        },
        {
          "field": "min_landscape_plus_open_space",
          "value": 20,
          "unit": "percent",
          "condition": "of total lot area"
        }
      ],
      "evidence": "§24.4.D: \"Maximum Lot Coverage: Forty-five percent (45%) total, including main and accessory buildings\". §24.5.B: \"A minimum of twenty percent (20%) of the total lot area shall be devoted to a combination of landscaping ... and usable open space\".",
      "limitations": "No impervious-coverage maximum is stated. Under §24.4.A.4, properties platted or zoned MF-15 before the effective date may keep their size and configuration but must meet the other standards."
    },
    {
      "id": "fb8ce7b7ff754c43e9651e107e1f7f0390aae5862f316a6db5f44337f0ae6c0b",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "MU maximum height is 70 ft. Any structure above 36 ft requires a CUP. Height is measured from grade plane to the average height of the highest roof surface. Accessory buildings are limited to 1 story. Other height rules are referenced in §43.4. Where a side or rear yard adjoins a residential district, the setback is 60 ft for any building over 1 story, and 200 ft for buildings over 2 stories or over 35 ft.",
      "citation": "§32.3.A (p.109); §32.4.B.5 (p.109)",
      "numeric_facts": [
        {
          "field": "max_height",
          "value": 70,
          "unit": "feet",
          "condition": "main structures"
        },
        {
          "field": "cup_required_above_height",
          "value": 36,
          "unit": "feet",
          "condition": "any structure above 36 ft"
        },
        {
          "field": "max_accessory_height",
          "value": 1,
          "unit": "stories",
          "condition": "accessory buildings"
        },
        {
          "field": "residential_adjacent_setback",
          "value": 60,
          "unit": "feet",
          "condition": "building over 1 story"
        },
        {
          "field": "residential_adjacent_setback",
          "value": 200,
          "unit": "feet",
          "condition": "building over 2 stories or 35 ft"
        }
      ],
      "evidence": "§32.3.A.1: \"Seventy feet (70'). Any structure above thirty-six feet (36') in height shall require a Conditional Use Permit (CUP).\" §32.4.B.5: \"sixty-foot (60') setback for any building that is over one (1) story in height, a two hundred foot (200') setback for buildings over two (2) stories or thirty-five feet (35') in height.\"",
      "limitations": "The text of §43.4 is not provided. §32.1 states that design and development standards are established on the site plan."
    },
    {
      "id": "e239083173faf9c6619ce6f9671540daa65ca9c73c4d4e10eb34e9a7e924a816",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "SF-15 maximum height for the main building/house is 2.5 stories and not more than 36 ft. The accessory-building item is marked 'Deleted', so no district-specific accessory height appears here. Other height requirements are referenced in Section 43.",
      "citation": "§17.3.A (p.56)",
      "numeric_facts": [
        {
          "field": "max_height",
          "value": 36,
          "unit": "feet",
          "condition": "main building/house"
        },
        {
          "field": "max_height",
          "value": 2.5,
          "unit": "stories",
          "condition": "main building/house"
        }
      ],
      "evidence": "§17.3.A.1: \"Two and one-half (2.5) stories, and not to exceed thirty-six feet (36'), for the main building/house. 2. Deleted. 3. Other requirements (see Section 43).\"",
      "limitations": "The Section 43 special height regulations and Section 40 accessory structure rules are not in the excerpt. Under §43.9, nonresidential structures in residential districts follow retail-district standards, including height. SF-15 is a transitional district."
    },
    {
      "id": "5253534fe8f79c7b7a30ab6792b6f09cc94c8f3c4f09b5e907ea4ebe7bea9e36",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "SF-6 allows the uses marked 'P' (by right) or 'C' (by CUP under §34b) for SF-6 in the Section 37 use charts. In the provided extraction, the chart's column headers are scrambled and blank cells are collapsed, so most row entries cannot be reliably assigned to the SF-6 column. The chart is also truncated after p.180. For rows that list all 12 residential districts, the entries suggest that single-family detached, residential accessory buildings, home occupation, foster family home, private resident swimming pools, churches, public parks, libraries, fire stations, and municipal community centers are P, and that bed & breakfast and electrical substations are C. These readings are not reliable.",
      "citation": "§20.2 (p.65); §37.1–37.2 (pp.169–180)",
      "numeric_facts": [],
      "evidence": "§20.2.A: \"Those uses listed for the SF-6 district in Section 37 as 'P' or 'C' are authorized uses permitted by right or conditionally permitted uses, respectively.\" §37.1.B: \"If a use is not listed (or blank) in the Use Charts, it is not allowed in any zoning district.\"",
      "limitations": "Table layout was lost in extraction, and use-chart pages after p.180 are missing. SF-6 is a transitional district: no new property may be zoned SF-6."
    },
    {
      "id": "a337a818cbf01197902d4a7d447bb8e01536de5eb682e1a564979e3a98f26402",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "The supplied user guide lists an accessory apartment (ADU) as a permitted residential accessory structure only 'in accordance with Section 9-1255 (m) 1.' The ADU standards in that LDO section (size, occupancy, districts, parking, and so on) are not in the provided text. General accessory-structure limits also apply: a building permit is required. Inside the corporate limits the cap is 3 accessory uses on lots of 0.3 acres or more, or 2 on lots under 0.3 acres or zoned RMU. There is no cap in the ETJ. Aggregate accessory-structure area may not exceed 10% of lots under 1 acre or 5% of lots of 1 acre or more. RMU accessory buildings are limited to 500 sq ft. Most accessory structures need an 8 ft minimum setback (see 9-1302 a.-d.). Inside the corporate limits, accessory structures may not be rented, leased or sold separately from the principal structure, and the guide does not reconcile this with ADU use. The guide states it does not supersede the LDO.",
      "citation": "Fuquay-Varina Planning Dept., Residential Accessory Structure User Guide (Rev. Feb 2024), p.1, referencing LDO Sec. 9-1255(m)1 and 9-1302",
      "numeric_facts": [
        {
          "field": "max_accessory_uses_per_lot",
          "value": 3,
          "unit": "count",
          "condition": "inside corporate limits, lots >= 0.3 acres"
        },
        {
          "field": "max_accessory_uses_per_lot",
          "value": 2,
          "unit": "count",
          "condition": "inside corporate limits, lots < 0.3 acres or zoned RMU"
        },
        {
          "field": "max_aggregate_accessory_area",
          "value": 10,
          "unit": "percent_of_lot",
          "condition": "lots < 1 acre"
        },
        {
          "field": "max_aggregate_accessory_area",
          "value": 5,
          "unit": "percent_of_lot",
          "condition": "lots >= 1 acre"
        },
        {
          "field": "max_accessory_building_area",
          "value": 500,
          "unit": "sq_ft",
          "condition": "RMU district"
        },
        {
          "field": "min_accessory_setback",
          "value": 8,
          "unit": "ft",
          "condition": "most accessory structures; specifics per LDO 9-1302 a.-d."
        }
      ],
      "evidence": "p.1 'Permitted Accessory Structures: Accessory apartment in accordance with Section 9-1255 (m) 1. Accessory Dwelling Unit (ADU)'; 'This document is not intended to supersede the Land Development Ordinance (LDO).'",
      "limitations": "Secondary user guide, not the ordinance. The operative ADU standards in LDO 9-1255(m)1 are not provided, so district applicability and ADU-specific dimensional or use conditions cannot be established. The ban on renting separately may conflict with ADU use and is unresolved from this text."
    },
    {
      "id": "82d6927cd5f71bcec2403fe71fc0651233c664064e9a0e129e98bbcbab50a1f4",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "The provided document contains no lot size standard for the RMD district. It is an accessory-structure user guide and does not mention RMD.",
      "citation": null,
      "numeric_facts": [],
      "evidence": "The only text supplied is the Residential Accessory Structure User Guide, p.1. It mentions lot-size thresholds (0.3 acre, 1 acre) only for accessory-structure limits, and mentions the RMU district but not RMD.",
      "limitations": "The LDO district dimensional standards are not provided. A missing standard here is not evidence that no standard exists."
    },
    {
      "id": "4e57711eb833d830be8d7a527383fef0744bbbe12ebc34ea8c4c135b492c8e0f",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "Citywide sign regulation is in Gallatin Zoning Ordinance §13.07. Signs must be permitted unless exempt (§13.07.055) or temporary (§13.07.060). Signs must be on the premises of the principal use, except permitted off-premises signs. All signs not expressly permitted are prohibited. Freestanding/ground signs (per §13.07.100 diagrams): maximum height 8 ft from top of the sign structure to grade; maximum ground clearance 3 ft; minimum setback 5 ft from the leading edge to the right-of-way. Non-residential/mixed-use freestanding sign face: up to 1 sq ft per linear ft of street frontage, at most 3 freestanding signs per development, subject to the zone maximums in §13.07.110. Digital signs: no more than 50% of sign area; lot must have at least 100 ft of roadway frontage; must be freestanding/monument at no more than 8 ft; must be at least 250 ft from a conforming single-family residence; copy may change at most 8 times per 24 hours with a 1-second change interval; no scrolling or flashing; 0.3 foot-candle limit. General glare limit is 0.5 foot-candles. Multi-tenant development signs: height 12 ft, 120 sq ft per face, 300 sq ft aggregate, 10 ft setback, at least 350 ft apart. Out-parcel signs: 70 sq ft per face, 6 ft tall. The CC district has separate rules (§13.07.080). Community facilities in residential districts have their own rules (§13.07.085). The Planning Commission may approve an alternative master signage plan (§13.07.095).",
      "citation": "Gallatin Zoning Ordinance §13.07.010, .020, .050-.060, .075, .090, .095, .100, .109, .110, .120",
      "numeric_facts": [
        {
          "field": "freestanding_sign_max_height",
          "value": 8,
          "unit": "ft",
          "condition": "freestanding/ground signs, top of structure to grade (§13.07.100)"
        },
        {
          "field": "freestanding_sign_max_ground_clearance",
          "value": 3,
          "unit": "ft",
          "condition": "bottom of sign to grade"
        },
        {
          "field": "freestanding_sign_min_setback",
          "value": 5,
          "unit": "ft",
          "condition": "from right-of-way, leading edge of sign structure"
        },
        {
          "field": "max_freestanding_signs_per_development",
          "value": 3,
          "unit": "signs",
          "condition": "non-residential/mixed-use, regardless of street frontages (§13.07.075.F)"
        },
        {
          "field": "digital_max_share_of_sign_area",
          "value": 50,
          "unit": "percent",
          "condition": "all digital signs"
        },
        {
          "field": "digital_min_frontage",
          "value": 100,
          "unit": "ft",
          "condition": "lot roadway frontage for digital sign"
        },
        {
          "field": "digital_min_distance_single_family",
          "value": 250,
          "unit": "ft",
          "condition": "from conforming single-family residence along ROW"
        },
        {
          "field": "digital_max_changes",
          "value": 8,
          "unit": "changes per 24 hours",
          "condition": "1-second change interval"
        },
        {
          "field": "multi_tenant_sign_max_height",
          "value": 12,
          "unit": "ft",
          "condition": "multi-tenant development signs"
        },
        {
          "field": "multi_tenant_sign_max_face",
          "value": 120,
          "unit": "sq ft",
          "condition": "per face; 300 sq ft aggregate"
        },
        {
          "field": "glare_limit",
          "value": 0.5,
          "unit": "foot-candles",
          "condition": "all districts; digital signs 0.3"
        }
      ],
      "evidence": "§13.07.010.C.4 (p.13-3): 'To prohibit all signs not expressly permitted by this ordinance.' §13.07.020.A (p.13-4): 'No sign...shall be erected...until a sign permit has been issued.' §13.07.100 diagrams (p.13-39): 'maximum height of freestanding/ground signs shall be eight (8) feet'; 'minimum setback shall be five (5) feet'. §13.07.109 (p.13-42): digital standards. §13.07.120 table (p.13-45).",
      "limitations": "The excerpt is noncontiguous. §§13.07.040-.050 (start), .060 table (partially garbled), .065, .070 (residential signs), and most of .075 are missing or incomplete. The zone-specific maximum area cells in Tables 13.07.110 and 13.07.115 are illegible in the OCR. District-specific allowances therefore cannot be stated."
    },
    {
      "id": "ac7d85057dae8e0125dbc910d3652994d908f5a10755e7f529e4b1824187a20b",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "CC maximum height at the street line is 35 ft above curb level, measured at the front wall or other portion of the building at the street line. For each foot the building is set back from the street line, height may increase by 1.5 ft. Spires, belfries, cupolas, antennas, water tanks, chimneys and similar non-occupied rooftop appurtenances are exempt from height limits (§12.06).",
      "citation": "Gallatin Zoning Ordinance §08.01.020.B; §12.06",
      "numeric_facts": [
        {
          "field": "max_height_at_street_line",
          "value": 35,
          "unit": "ft",
          "condition": "front wall at street line, above curb level"
        },
        {
          "field": "height_increase_per_ft_setback",
          "value": 1.5,
          "unit": "ft per ft",
          "condition": "for each foot of setback from street line"
        }
      ],
      "evidence": "§08.01.020.B (p.8-4): 'maximum height of a front wall...at the street line shall be 35 feet above the curb level'; 'For each foot the building is set back from the street line the height...may be increased by 1.5 feet.'",
      "limitations": "No absolute cap is stated in the excerpt. Tower height limits under §12.11 are separate."
    },
    {
      "id": "71bafd5fb27ea831a4ff2db67e2388bd1ff309127e7cf6db82660f20556035b7",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "CG maximum lot coverage is 50 percent.",
      "citation": "Gallatin Zoning Ordinance §08.03.020.A",
      "numeric_facts": [
        {
          "field": "max_lot_coverage",
          "value": 50,
          "unit": "percent",
          "condition": "CG district"
        }
      ],
      "evidence": "§08.03.020 Bulk Regulations (p.8-11): 'A. Maximum Lot Coverage - 50 percent'.",
      "limitations": "Required yards and bufferyards may further limit buildable area. The excerpt does not define how coverage is measured."
    },
    {
      "id": "704e7a2150cbb91b9b49e3138895e9b08f5722935d359180ffee3e884ceaaec0",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "CS minimum yards: front 10 ft, side 10 ft, rear 20 ft; minimum setback line 10 ft. Greater setbacks may be required next to another zoning district to meet §13.03 bufferyard requirements. The building setback must equal or exceed the required yard or bufferyard, whichever is greater (§12.01.050). On roads scheduled for widening, setbacks are measured from the projected future right-of-way line (§12.04). Accessory structures must be 4 ft from side and rear lines and are not allowed in the front yard (§12.01.030).",
      "citation": "Gallatin Zoning Ordinance §08.02.030; §12.01.050; §12.04; §12.01.030",
      "numeric_facts": [
        {
          "field": "min_front_yard",
          "value": 10,
          "unit": "ft",
          "condition": "CS"
        },
        {
          "field": "min_side_yard",
          "value": 10,
          "unit": "ft",
          "condition": "CS"
        },
        {
          "field": "min_rear_yard",
          "value": 20,
          "unit": "ft",
          "condition": "CS"
        },
        {
          "field": "min_setback_line",
          "value": 10,
          "unit": "ft",
          "condition": "CS"
        },
        {
          "field": "accessory_min_side_rear_setback",
          "value": 4,
          "unit": "ft",
          "condition": "accessory structures, from side and rear lot lines (§12.01.030)"
        }
      ],
      "evidence": "§08.02.030 (p.8-8): 'B. Minimum Front Yard - 10 feet C. Minimum Side Yard - 10 feet D. Minimum Rear Yard - 20 feet E. Minimum Setback Line - 10 feet'; 'Greater yard and building setbacks may be required...bufferyard requirements of Article 13, Section 13.03.'",
      "limitations": "The §13.03/13.04 bufferyard widths are not provided, so actual setbacks next to other districts cannot be computed."
    },
    {
      "id": "fa9762e99d1bb6511c85b89ead8633cb0b5d6a9391f3f3adb216e4314679b4f9",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "IR maximum lot coverage is 50 percent.",
      "citation": "Gallatin Zoning Ordinance §09.02.020.A",
      "numeric_facts": [
        {
          "field": "max_lot_coverage",
          "value": 50,
          "unit": "percent",
          "condition": "IR district"
        }
      ],
      "evidence": "§09.02.020 Bulk Regulations (p.9-6): 'A. Maximum Lot Coverage - 50 percent'.",
      "limitations": "Yards, the 75 ft setback from residential lot lines (§09.02.050.B), and bufferyards may further limit buildable area."
    },
    {
      "id": "0bfbc4d80a63a19948c63e2b18d3b7f4fb961dc0b128627755810c74635c7541",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "No numeric minimum lot area is set for IR. Individual building sites must be large enough that the structures have architectural unity and flexibility in arrangement and all space requirements of the district are met. For limited child/adult care facilities in IR, lot size conforms to the district (§15.06.050.A). Some conditional community facilities require twice the district lot area or other set minimums.",
      "citation": "Gallatin Zoning Ordinance §09.02.030.A",
      "numeric_facts": [],
      "evidence": "§09.02.030.A (p.9-6): 'Lot Area - Individual building sites shall be of such size that the structures involved will have architectural unity and flexibility in arrangements and that all space requirements set forth herein are met.'",
      "limitations": "The standard is qualitative. Compliance depends on the yards (20/15/20 ft), coverage, parking and bufferyard requirements."
    },
    {
      "id": "7bfa1b92ce3875f97deb9b22603eba6df74741e6530432693fb4797508e45f10",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "MU maximum building height is 35 ft for both residential and non-residential development. Exceptions to maximum building height may be granted through Preliminary or Final Master Development Plan approval (§15.07.030.D.1.h and D.2.c). Non-occupied rooftop appurtenances are exempt (§12.06).",
      "citation": "Gallatin Zoning Ordinance §07.03.020.A.2; §07.03.30.A.1; §15.07.030.D; §12.06",
      "numeric_facts": [
        {
          "field": "max_building_height",
          "value": 35,
          "unit": "ft",
          "condition": "MU residential development"
        },
        {
          "field": "max_building_height",
          "value": 35,
          "unit": "ft",
          "condition": "MU non-residential development"
        }
      ],
      "evidence": "§07.03.020.A (p.7-8): '2. Maximum Building Height 35 feet'. §07.03.30.A (p.7-9): '1. Maximum Building Height 35 feet'. §15.07.030.D.1.h (p.15-45): exceptions to 'maximum building height' may be granted.",
      "limitations": "The height measurement method is not provided in the excerpt."
    },
    {
      "id": "8cbcd57009d1c0b697ef261f6bce60f7a42e05100a96d43c4a389c72acfb4c38",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "MUG maximum height is 35 ft. MUG provisions apply only to MUG districts approved before July 7, 1998. Non-occupied rooftop appurtenances are exempt (§12.06).",
      "citation": "Gallatin Zoning Ordinance §07.04.020.D; §07.04; §12.06",
      "numeric_facts": [
        {
          "field": "max_height",
          "value": 35,
          "unit": "ft",
          "condition": "existing MUG districts approved prior to July 7, 1998"
        }
      ],
      "evidence": "§07.04.020 (p.7-13): 'D. Maximum Height – 35 feet'. §7.04 (p.7-11): 'These provisions apply to only those Mixed-Use General Districts that were approved prior to July 7, 1998.'",
      "limitations": "The height measurement method is not provided."
    },
    {
      "id": "47e3a0eb381c5c14f7b8791588056c3a257baa22c3839d6aae57f69a7a8e913c",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "PGC maximum lot coverage is 50 percent. In addition, at least 7.5 percent of lot area must be permanently maintained landscape area, exclusive of required bufferyards. Bufferyards are 20/15/12 ft depending on frontage. Development is governed by the approved master development plans.",
      "citation": "Gallatin Zoning Ordinance §08.04.040.A.2; §08.04.050.B.1",
      "numeric_facts": [
        {
          "field": "max_lot_coverage",
          "value": 50,
          "unit": "percent",
          "condition": "PGC district"
        },
        {
          "field": "min_site_landscape_area",
          "value": 7.5,
          "unit": "percent of lot area",
          "condition": "exclusive of required bufferyard"
        }
      ],
      "evidence": "§08.04.040.A (p.8-15): '2. Maximum Lot Coverage: 50 percent'. §08.04.050.B.1 (p.8-16): 'a minimum of seven and one-half percent of the lot area...shall be permanently maintained landscape area'.",
      "limitations": "Master development plan conditions may impose more restrictive limits."
    },
    {
      "id": "c47025e85a7b27f5aa1888697029ef578afe5b61eae4606d5c21bad2f07b4308",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "R8 minimum lot area is 8,000 sq ft, with a minimum lot width of 55 ft at the building line. Other R8 qualifications:\n- Minimum development area is 7,000 sq ft per dwelling unit.\n- Maximum overall site density is 5.5 units per gross acre.\n- Townhouses need at least 6,500 sq ft of site area per unit in a common development; an individually sold townhouse lot must be at least 5,000 sq ft and 20 ft wide.\n- Limited child/adult care facilities in R-8 require twice the district lot area (§15.06.050.A).\n- In a PRD on an R-8 base, the minimum single-family lot is 6,000 sq ft (Table 06-01). In a mixed-type PRD it is 6,000 sq ft detached and 5,500 sq ft attached (Table 06-02).\n- The R8 district requires a preliminary master development plan, through which lot-size exceptions may be granted (§15.07.030.D.1.h).",
      "citation": "Gallatin Zoning Ordinance §06.07.040.A.1-2; §06.07.030.A, D; §06.07.062; Tables 06-01, 06-02; §15.06.050.A",
      "numeric_facts": [
        {
          "field": "min_lot_area",
          "value": 8000,
          "unit": "sq ft",
          "condition": "R8 base"
        },
        {
          "field": "min_lot_width",
          "value": 55,
          "unit": "ft",
          "condition": "at building line"
        },
        {
          "field": "min_development_area_per_unit",
          "value": 7000,
          "unit": "sq ft",
          "condition": "per dwelling unit"
        },
        {
          "field": "max_overall_density",
          "value": 5.5,
          "unit": "units per gross acre",
          "condition": "site"
        },
        {
          "field": "townhouse_site_area_per_unit",
          "value": 6500,
          "unit": "sq ft",
          "condition": "common townhouse development"
        },
        {
          "field": "townhouse_individual_lot_min",
          "value": 5000,
          "unit": "sq ft",
          "condition": "townhouse lot sold individually"
        },
        {
          "field": "prd_min_lot_size",
          "value": 6000,
          "unit": "sq ft",
          "condition": "PRD with R-8 base, single-family on individual lots"
        }
      ],
      "evidence": "§06.07.040.A (p.6-24): '1. Minimum Required Lot Area - the minimum required lot area shall be 8,000 square feet. 2. Minimum Lot Width...fifty-five (55) feet.' §06.07.030.A: 'less than 7,000 square feet per dwelling unit.' §06.07.062.B-C (p.6-26).",
      "limitations": "Article 13.01 provisions on lot area remainder adjustments are referenced but not provided."
    },
    {
      "id": "05e4a531d7254d566b048458f0513f513da3281d091d004c4b3f2cc30e299dd5",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "ER (Estate Residential) base-district minimum yards: front 40 ft; side street 35 ft; interior side 20 ft; rear 35 ft. Table 4 attaches footnotes 5 and 6 to rear yards only from SR-1 rightward; none appear in the ER rear cell. Qualifications: (1) permitted encroachments under Ch. 10.5 / Table 12 and accessory-structure rules in 10.4.1.4. Example: roofed accessory buildings up to 400 sf, at least 10 ft from the principal building, may sit within 5 ft of rear and side lot lines. (2) Table 4 applies to base districts only. An ER planned development uses Table 9 instead (front 25, side street 20, side 8, rear 20; non-residential uses double the SF figures). (3) Variances are available under Ch. 4.4. (4) A detached accessory dwelling, conditional in ER, must be at least 20 ft from side and rear lines.",
      "citation": "Zoning Ordinance 2026-10, Ch. 6.3, Table 4 (p. 86); Ch. 10.5 Table 12; Ch. 10.4.1.4.C; Ch. 10.4.2.3.I; Ch. 8 Table 9",
      "numeric_facts": [
        {
          "field": "min_front_yard",
          "value": 40,
          "unit": "ft",
          "condition": "ER base district"
        },
        {
          "field": "min_side_street_yard",
          "value": 35,
          "unit": "ft",
          "condition": "ER base district"
        },
        {
          "field": "min_side_yard",
          "value": 20,
          "unit": "ft",
          "condition": "ER base district"
        },
        {
          "field": "min_rear_yard",
          "value": 35,
          "unit": "ft",
          "condition": "ER base district"
        },
        {
          "field": "accessory_dwelling_side_rear_setback",
          "value": 20,
          "unit": "ft",
          "condition": "detached accessory dwelling; no variance"
        }
      ],
      "evidence": "p.86 Table 4: the ER column (1 acre lot, 100 ft width, 20% coverage) reads Min. Front Yard 40, Min. Side Street Yard 35, Min. Side Yard 20, Min. Rear Yard 35. 6.3: 'These regulations apply to the base districts only. See Chapter 8, Table 9...' and 'See Chapter 10.5 ... for allowed encroachments.'",
      "limitations": "The Table 4 header text is garbled, but the ER column is identified consistently by its lot area, width, and coverage values. The excerpt is incomplete, so other overlays (e.g., airport hazard) were not reviewed. ER-PD values come from a garbled Table 9 and are less certain."
    },
    {
      "id": "04d6c0a62074f782d4b8c5096ab78e8c3771c6184c73af146b2862c1a00527c7",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "No reliable MXC maximum lot coverage can be established from this excerpt. MXC is permitted only with a Planned Development overlay (7.1.3). Table 6 (commercial base-district bulk) has no MXC column. Its note 1 says only 'Development Plan required for MXC and MXR.' Table 10 (commercial PD) lists floor-area ratio and minimum pervious area but has no lot-coverage row. Its column headers are scrambled, so the MXC FAR and pervious values cannot be assigned reliably. Table 9 (residential PD) includes an MXC column with a Max. Lot Coverage row for residential uses. Its text layout is garbled, though it appears to read SF 50% / TH 75% / MF 40%; this cannot be verified. Table 7 requires 20% common open space for the residential part of an MXC-PD.",
      "citation": "Zoning Ordinance 2026-10, Ch. 7.1.3; Ch. 7.4.1 Table 6 (p. 99); Ch. 8.7.3 Table 10 (p. 114); Ch. 8.6.3 Table 9 (p. 112); Table 7 (p. 108)",
      "numeric_facts": [],
      "evidence": "7.1.3: 'This district is permitted only with a Planned Development overlay Plan.' Table 6 columns are NC, O, GC, HC, DN, I only. 8.7.3: 'Table 10 ... establishes minimum lot pervious and yard areas, maximum building height, and floor-area ratio.' Table 9 has an MXC column, but its lot-coverage cells are misaligned in the extracted text.",
      "limitations": "Table layout prevents reliable column mapping in Tables 9 and 10. The absence of a lot-coverage row in Table 10 is not positive evidence of no regulation. Individual PD development plans may impose their own standards."
    },
    {
      "id": "e4a9a91d0100872dba28788f205b4bf20f2454cebc20b55a547bf684e3731f5f",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "The full NC permitted-use list cannot be reliably extracted. The Table 5 column headers are scrambled, and blank cells collapse in the text, so most rows cannot be mapped to the NC column. Reliably established: (1) Rows marked P in all eight columns, which therefore include NC, are permitted in NC: Government Facility & Offices; Public Safety Facility; Public Works Facility & Utility; Day Care Center, Child (subject to 10.3.4); Utility, Private. (2) Smoke shops are not allowed in NC; 10.3.17.1 limits them to conditional use in GC and HC only. (3) Data centers are not allowed in NC (10.3.20: HC and I only). (4) Uses that are unlisted or blank are not permitted, subject to Director interpretation under 7.3. NC's stated purpose (7.1.1) is convenience retail and service establishments for nearby residential areas. Footnote 4 in Table 5 (10,000 sf maximum gross building area per tenant) likely applies to NC retail and office entries, but the column assignment is unverified.",
      "citation": "Zoning Ordinance 2026-10, Ch. 7.1.1; Ch. 7.2 Table 5 (pp. 91-95) and notes; Ch. 7.3; Ch. 10.3.17.1; Ch. 10.3.20",
      "numeric_facts": [],
      "evidence": "7.2: a 'P' means permitted, a 'C' means conditional, and a blank or unlisted use 'is not an allowable use.' Table 5 rows such as 'Government Facility & Offices P P P P P P P P' and 'Utility, Private P P P P P P P P' carry P in all eight columns. 10.3.17.1: 'smoke shops shall be permitted by Conditional Use only in General Commercial (GC) and Heavy Commercial (HC).'",
      "limitations": "Column order and blank cells are lost in the extracted table text, so the P/C status in NC is undetermined for most uses (retail, office, restaurant, personal services, etc.). A clean rendering of Table 5 is needed."
    },
    {
      "id": "dfadad1d82f8141ff28b80a339420aacdf958aea416698d7d2ea823db85d983f",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "CB setbacks, applying to all buildings and structures: front minimum 30 ft with no front maximum (n/a). Side-corner minimum 30 ft. All other setbacks (side and rear) minimum 5 ft. Minimum setback to adjacent RR/SR/NR districts is 50 ft. Thoroughfare setbacks: 100 ft from Freeway NC 540/US 1, 50 ft from Freeway NC 55, and 25 ft from a Thoroughfare. Qualifications: N9 allows attached dwelling units a 0-ft side setback where they share a common wall; end units must provide a 5-ft side setback or 10 ft between buildings. N8 says building placement standards apply to all buildings and structures unless specifically permitted otherwise, and refers to §2.3.6 encroachments, §3.3 and §3.4. Under §2.3.5, outlots or multi-tenant buildings in an Integrated Center may use a 0-ft setback along lot lines shared with other outlots or the main portion of the center. Outlot portions on the project perimeter must meet the thoroughfare, front, side and rear setbacks. Setbacks are measured from the future planned right-of-way (§2.3.3.D). PUD or CD approvals may set different standards, and building placement is CD-modifiable (Table 2.4.3-A).",
      "citation": "Holly Springs UDO Ch. 2, Table 2.2.2-A and Notes N8–N9 (pp. 2-9–2-10); §§2.3.3, 2.3.5, 2.3.6, 2.4.3 (pp. 2-14–2-20)",
      "numeric_facts": [
        {
          "field": "front_setback_min",
          "value": 30,
          "unit": "ft",
          "condition": "CB, all buildings/structures"
        },
        {
          "field": "side_corner_setback_min",
          "value": 30,
          "unit": "ft",
          "condition": "CB"
        },
        {
          "field": "side_rear_setback_min",
          "value": 5,
          "unit": "ft",
          "condition": "CB, all other side and rear setbacks"
        },
        {
          "field": "setback_adjacent_residential_min",
          "value": 50,
          "unit": "ft",
          "condition": "CB adjacent to RR/SR/NR districts"
        },
        {
          "field": "thoroughfare_setback",
          "value": 100,
          "unit": "ft",
          "condition": "Freeway NC 540/US 1"
        },
        {
          "field": "thoroughfare_setback",
          "value": 50,
          "unit": "ft",
          "condition": "Freeway NC 55"
        },
        {
          "field": "thoroughfare_setback",
          "value": 25,
          "unit": "ft",
          "condition": "Thoroughfare"
        },
        {
          "field": "side_setback_common_wall",
          "value": 0,
          "unit": "ft",
          "condition": "Attached dwelling units sharing a common wall (N9)"
        },
        {
          "field": "end_unit_side_setback",
          "value": 5,
          "unit": "ft",
          "condition": "Attached dwelling end units, or a minimum 10 ft between buildings (N9)"
        },
        {
          "field": "outlot_shared_line_setback_min",
          "value": 0,
          "unit": "ft",
          "condition": "Outlots or multi-tenant buildings in an Integrated Center, along lot lines in common (§2.3.5.A)"
        }
      ],
      "evidence": "Table 2.2.2-A, CB column: 'Front Setback (minimum) 30'; 'Front Setback (maximum) n/a'; 'Side - Corner Setback (minimum) 30'; 'All other setbacks (Side and Rear) (N9) 5'; 'Setback to Adjacent RR/SR/NR Districts (minimum) 50'. Thoroughfare rows: 100/50/25. N9: 'Attached Dwelling Units are allowed a 0-ft Side Setback where the unit shared a common wall...'",
      "limitations": "Attached dwellings are shown as '--' (not permitted) for CB in Table 3.2-A, so N9 has limited practical effect in CB. Table 2.3.6-A encroachment allowances and the §3.3/§3.4 use-specific setbacks were only partly reviewed; for example, fueling canopies must be 15 ft from the right-of-way and 30 ft from Residential districts. Perimeter buffers in Chapter 5 were not provided."
    },
    {
      "id": "6d26e320ceb69178924d764fd70aba48423fd5f1c6d10b417ec2bd868ef196c2",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "DMX permissions under Table 3.2-A (DMX is the 7th of 13 district columns). P = permitted by right. PS = permitted with additional standards. CD = Conditional Zoning District only. A = accessory only. '--' = prohibited.\n\nPermitted by right (P): Hotel; Inn; Business Services; Medical Office; Office Use; Personal Services; Veterinary Clinic/Hospital; Food/Restaurant Uses; Retail Uses; Theater; Assembly Use; Community Support Facility; School (Commercial, Trade or Business); Fitness Facilities/Studios; Transit Station/Terminal.\n\nPermitted with additional standards (PS): Apartment Dwelling; Apartment Dwelling – Upper Story Unit; Bed and Breakfast; Child Care Center; Amusement & Entertainment, Indoor (max 5,000 sf GFA under §3.3.5.B); Bar/Tasting Room; Cemetery; Civic Building; Religious Use; Recreation Facility, Indoor; Recreation Facility, Outdoor (<50 acres); Neighborhood Manufacturing; Infrastructure/Utilities (Minor); Parking Garage; Wireless Telecommunications Equipment.\n\nConditional Zoning District only (CD): Attached Dwelling (Duplex, Triplex, Quadruplex, Townhome); Amusement & Entertainment, Outdoor; Recreation Facility, Outdoor (>50 acres); Infrastructure/Utilities (Major); Parking Lot – Principal Use.\n\nAccessory only (A): Solar Energy Systems – Small.\n\nProhibited (--): all other listed uses. These include Detached and Cottage Dwellings, Family Care Home, Group Home, Manufactured Dwelling, Residential Care Facilities, Motel, Hospital, Self-Service Laundry, Mortuary, Vehicle Service (Major and Minor), Drive In/Drive Through (including Car Wash), Fueling Station, vehicle sales and leasing, Tobacco Stores, School (K-12), Golf Course, Research and Development Facilities, industrial and agricultural uses, Large Solar, Wireless Telecommunications Tower, Neighborhood Recycling Collection Point, Outdoor Advertising Sign, and Adult and Electronic Gaming uses.\n\nKey qualifications:\n- §3.3.2.A.2: in non-residential districts, apartments are allowed only on upper stories of a vertically integrated mixed-use building with permitted non-residential ground-floor uses. Other locations or configurations require a CD.\n- §3.3.2.B.2: attached dwellings may not front Main Street between Earp Street and Elm Street.\n- §3.1.3.B: the Administrator decides uses not listed in the table.\n- §2.4.1.E.2: a CD may not allow uses not expressly permitted in the base district, except as Table 2.4.3-A allows.",
      "citation": "Holly Springs UDO Ch. 3, §3.1.1, §3.1.3, Table 3.2-A (pp. 3-1–3-6), §3.3.2.A–B (p. 3-7), §3.3.5.B (p. 3-10)",
      "numeric_facts": [
        {
          "field": "indoor_amusement_max_gfa",
          "value": 5000,
          "unit": "sf",
          "condition": "Amusement & Entertainment, Indoor (PS) per §3.3.5.B"
        },
        {
          "field": "bar_tasting_room_school_separation",
          "value": 300,
          "unit": "ft",
          "condition": "Bars/Tasting Rooms not within 300 ft of a School (K-12) per §3.3.5.D.2.a"
        },
        {
          "field": "bar_dwelling_cd_trigger",
          "value": 100,
          "unit": "ft",
          "condition": "Bar/Tasting Room within 100 ft of a dwelling unit requires a CD per §3.3.5.D.2.b"
        }
      ],
      "evidence": "Table 3.2-A header order: RR, SR, NR, NCR, MXR, NMX, DMX, RMX, CB, SP (CD only), IVMX, BRT, HI (CD only). Example rows: Apartment Dwelling '-- -- -- CD PS PS PS PS PS -- PS -- --' (DMX = PS); Hotel '-- -- -- -- -- CD P P P P P -- --' (DMX = P); Detached Dwelling 'P P P P P CD -- CD ...' (DMX = --). §3.1.1 defines P/PS/A/SUP/CD/'—'.",
      "limitations": "The excerpt is incomplete, and several §3.3 PS standards (for example, Neighborhood Manufacturing, Parking Garage, Child Care, Religious and Recreation uses) were not provided. The Tattoo Studios row extracted with only 12 values ('-- -- -- -- -- -- -- P P -- P --'), so its DMX value is uncertain; it is probably '--'. Column alignment was inferred from token counts in the extracted PDF text."
    },
    {
      "id": "a3c926596f6e602c3de21357356303a2f9387fda14eaee5f5c57d6de1e1f22e5",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "There is no fixed numeric height limit for HI. Table 2.2.3-A sets HI 'All Building/Structure(s)' height and the CD maximum to N9: 'Maximum Building Height shall be established with a Conditional Zoning District (CD).' HI is a Conditional Zoning District–only district (§2.1.3). Residential finished floor elevation is n/a for HI. Height is measured from the average elevation of the proposed finished grade at the front of the building or structure to the uppermost eave line (§2.3.7.A). Parapet walls, chimneys, spires, cupolas, steeples and building-attached antennas are excluded from height (§2.3.7.B).",
      "citation": "Holly Springs UDO Ch. 2, §2.1.3 (p. 2-5); Table 2.2.3-A and Note N9 (p. 2-13); §2.3.7 (p. 2-15)",
      "numeric_facts": [],
      "evidence": "Table 2.2.3-A, Building Height (ft), HI column: 'All Building/Structure(s) N9'; '(maximum with Conditional Zoning District (CD)) N9'. N9: 'Maximum Building Height shall be established with a Conditional Zoning District (CD).' §2.1.3: 'Heavy Industrial Districts may only be established or expanded using the Conditional Zoning District (CD) process.'",
      "limitations": "The actual height limit depends on each property's CD approval, which is not in the source. Other ordinances, such as airport overlays, were not provided."
    },
    {
      "id": "3c8d9c7af20da296f5026349f7c867dafeb92dd2315837fc9fc7c3ce9c7d113f",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Table 2.2.2-A sets no minimum lot area or minimum lot width for NMX. Its 'Lot Configuration' block lists only frontage standards:\n- Minimum Lot Frontage: 50 ft. Under N6, each Single Use Site, Subdivision or Integrated Center must have this frontage on a Public Street. Outlots on Private Streets or common Open Space measure frontage along the private street or alley line and need recorded public access easements.\n- Minimum Frontage for a Driveway: 60 ft for Detached/Attached Dwellings permitted by right. N7 allows alternatives for pre-UDO lots, and flexibility is available through a CD.\n- Development intensity: Minimum Development Area is 0 acres. Under N1, this applies only to sites over 5 acres.\n- Related intensity limits: Maximum Gross Main Floor Area per building is 16,000 sf for a Single Use Site, 24,000 sf for an Integrated Center, and up to 125,000 sf for an Integrated Center with a CD.\n- PUD or CD approvals may set different standards. Table 2.4.3-A lists Minimum Lot Area and Lot Width as CD-modifiable.",
      "citation": "Holly Springs UDO Ch. 2, §2.1.D (p. 2-1); Table 2.2.2-A and Notes N1, N6, N7 (pp. 2-9–2-10); Table 2.4.3-A (p. 2-20)",
      "numeric_facts": [
        {
          "field": "minimum_development_area",
          "value": 0,
          "unit": "acres",
          "condition": "NMX; N1 applicable to sites greater than 5 acres"
        },
        {
          "field": "minimum_lot_frontage",
          "value": 50,
          "unit": "ft",
          "condition": "NMX, on a Public Street (N6)"
        },
        {
          "field": "minimum_driveway_frontage",
          "value": 60,
          "unit": "ft",
          "condition": "NMX Detached/Attached Dwellings permitted by right (N7)"
        },
        {
          "field": "max_main_floor_area_per_building",
          "value": 16000,
          "unit": "sf",
          "condition": "NMX Single Use Site"
        },
        {
          "field": "max_main_floor_area_per_building",
          "value": 24000,
          "unit": "sf",
          "condition": "NMX Integrated Center"
        },
        {
          "field": "max_main_floor_area_per_building",
          "value": 125000,
          "unit": "sf",
          "condition": "NMX Integrated Center with CD"
        }
      ],
      "evidence": "Table 2.2.2-A: 'Minimum Development Area (acres) (N1) 0'; 'Lot Configuration – Minimum Lot Frontage (N6) 50'; 'Minimum Frontage for a Driveway (ft) ... 60'. By contrast, the residential Table 2.2.1-A has explicit 'Minimum Lot Area (sf)' and 'Minimum Lot Width' rows. §2.1.D: Section 2.2 establishes '...minimum Lot configurations.'",
      "limitations": "The conclusion that NMX has no minimum lot area or width rests on the omission of those rows from the Chapter 2 table, not on an express 'none' entry. Chapter 8 (lot design standards) and use-specific standards in Chapter 3 were not fully provided and could add lot requirements."
    },
    {
      "id": "1e222802f21bbf23e5f823d1291e10675f204db6289f8d99b1665e1b50da31e3",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "SR height limits:\n- Primary building(s): maximum 35 ft, or 50 ft with a Conditional Zoning District (CD).\n- Accessory building/structure(s): maximum 25 ft, and under N14 never higher than the primary building on the lot.\n- Residential finished floor elevation above sidewalk grade: n/a in SR.\n- Measurement (§2.3.7.A): from the average elevation of the proposed finished grade at the front of the building or structure to the uppermost eave line.\n- Exemptions (§2.3.7.B): parapet walls, chimneys, spires, cupolas, steeples and attached antennas are excluded.\n- PUD or CD approvals may set different standards (§2.2.1.A).",
      "citation": "Holly Springs UDO Ch. 2, §2.2.1.A, Table 2.2.1-A Building Height and Note N14 (p. 2-8); §2.3.7 (p. 2-15)",
      "numeric_facts": [
        {
          "field": "primary_building_height_max",
          "value": 35,
          "unit": "ft",
          "condition": "SR by right"
        },
        {
          "field": "primary_building_height_max",
          "value": 50,
          "unit": "ft",
          "condition": "SR with Conditional Zoning District (CD)"
        },
        {
          "field": "accessory_structure_height_max",
          "value": 25,
          "unit": "ft",
          "condition": "SR; not to exceed primary building height (N14)"
        }
      ],
      "evidence": "Table 2.2.1-A, SR column: 'Primary Building(s) (maximum) 35'; '(maximum with Conditional Zoning District (CD)) 50'; 'Accessory Building/Structure(s) (maximum) (N14) 25'; 'Finished Floor Elevation ... n/a'. N14: 'Accessory Buildings/Structures shall not exceed the height of the primary Building on the Lot/property.'",
      "limitations": "Use-specific height standards in §3.3/§3.4 (for example, wireless facilities or fences) were not fully provided."
    },
    {
      "id": "836956de7f75c82d9d1b8ef7792f29b7227da76c3d9ef0888b48dd76aee0bfb1",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "In the NR district, these residential uses are permitted by right: bed and breakfast inns; boarding or rooming houses for up to four roomers; congregate housing designed within the 'civic' building type; family care home; multi-family homes; and single family homes. These residential uses are permitted with conditions: retirement communities (Sec. 9.50) and multi-family homes (Sec. 9.64). Multi-family homes appear in both lists, so in either case they are subject to Sec. 9.64. Under 9.64.1, one multi-family home on one lot must meet minimum buffer widths along adjoining property lines (street rights-of-way excluded). The buffers run from 5 ft to 40 ft depending on unit count, density and the adjoining use. Planting is 3 trees and 10 evergreen shrubs per 1,000 sq ft of buffer. Under 9.64.2, two or more multi-family homes on one lot constitute a major subdivision and must follow the Multi-Building Sites approval process (Subdivision Ordinance Sec. 6.800). Mixed-use or commercial-building uses and civic uses (cemeteries, religious institutions, schools, parks, etc.) are also listed but are not residential.",
      "citation": "Huntersville Zoning Ordinance Art. 3.2.4(a) and Art. 9.64, as amended by TA 22-16 (Town Board decision March 20, 2023)",
      "numeric_facts": [
        {
          "field": "boarding_rooming_house_max_roomers",
          "value": 4,
          "unit": "roomers",
          "condition": "permitted by right in NR"
        },
        {
          "field": "mf_min_buffer_width",
          "value": 5,
          "unit": "feet",
          "condition": "one MF home on one lot; 4 or fewer units, or internal to the major subdivision, or adjoining TC/TOD-R/TOD-E"
        },
        {
          "field": "mf_min_buffer_width",
          "value": 10,
          "unit": "feet",
          "condition": "density under 10 units/acre; or 10+ units/acre adjoining anything other than a detached, duplex or attached house"
        },
        {
          "field": "mf_min_buffer_width",
          "value": 20,
          "unit": "feet",
          "condition": "10-15 units/acre adjoining a detached, duplex or attached house"
        },
        {
          "field": "mf_min_buffer_width",
          "value": 30,
          "unit": "feet",
          "condition": "15+ to 20 units/acre adjoining a detached, duplex or attached house"
        },
        {
          "field": "mf_min_buffer_width",
          "value": 40,
          "unit": "feet",
          "condition": "over 20 units/acre adjoining a detached, duplex or attached house"
        },
        {
          "field": "mf_buffer_trees",
          "value": 3,
          "unit": "trees per 1,000 sq ft of buffer",
          "condition": "at least 50% large maturing, at least 25% small maturing, at least 75% evergreen"
        },
        {
          "field": "mf_buffer_shrubs",
          "value": 10,
          "unit": "shrubs per 1,000 sq ft of buffer",
          "condition": "100% evergreen"
        },
        {
          "field": "mf_homes_per_lot_triggering_major_subdivision",
          "value": 2,
          "unit": "buildings",
          "condition": "two or more MF homes on one lot"
        }
      ],
      "evidence": "File 4c2ac16fbbee04ef.pdf (TA 22-16), p.1, Sec. 3.2.4(a), 'Uses permitted by right': 'bed and breakfast inns', 'boarding or rooming houses for up to four roomers', 'congregate housing designed within the \"civic\" building type', 'family care home', 'multi-family homes', 'single family homes'. 'Uses permitted with conditions' includes 'retirement communities (9.50)' and 'multi-family homes (9.64)'. pp.5-6, Art. 9.64: 'Multi-family homes in the NR, NC, TC and HC zones shall be subject to the following provisions', followed by the .1 buffer table and the .2 major subdivision rule. File 28a019104bed3d2b.pdf, p.2, Sec. 10.4 classifies NR as a Residential district. Separately, MH-O overlay Sec. 3.3.1(a) (file 01ca063228a61fd2.pdf) allows underlying-district uses plus family care homes and conditional manufactured homes, but only where that overlay applies.",
      "limitations": "This is amendment text, not the codified ordinance. It notes that new language is bold and removed language is struck through, but that formatting is lost in this extraction. As a result, it cannot be confirmed whether by-right 'multi-family homes' was retained or struck when the conditional '(9.64)' listing was added. Either way, 9.64 applies to multi-family homes in NR. The conditions in Secs. 9.50 (retirement communities) and other referenced Art. 9 sections are not provided. Building-type and lot-type limits in Article 4 are not provided. Later amendments after these vintages are not reviewed. The MH-O overlay manufactured-home allowance applies only where the overlay is mapped."
    },
    {
      "id": "1291e78e7159743bffc165348377979e1b651be9ea8844176d0a76866d33cb83",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "Not established by the provided source. The document is only Division 500, Table 500-5 (Table of Permitted Uses). It contains no general accessory structure standards such as size, height, setbacks, number or location. The only accessory-related rows are use permissions: Accessory Apartments, Accessory Use - Short-Term Rental, Equine Stables accessory to Single-Family residence, Accessory Outdoor Storage, and Retail Sales, Accessory. Note 1 refers to Division 700 for supplementary use regulations, and that division is not provided.",
      "citation": null,
      "numeric_facts": [],
      "evidence": "Table 500-5, pp.1-11: lists use types and P/C/-- codes only. Note 1 (p.11): 'Supplementary Use Regulations for additional requirements in Division 700.' No accessory structure dimensional rules appear.",
      "limitations": "Accessory structure standards are likely in another division (e.g., Division 700 or district dimensional standards), which was not supplied. The absence of rules in this table is not positive evidence that no standard exists."
    },
    {
      "id": "d95e5e99374e7fe653a0f53cb5d845847fe0b35f8e1da1e0ff570c02d123d946",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "Not established by the provided source. Table 500-5 has no 'Home Occupation' use row and no home occupation standards. Related rows that do appear are Adult Day Care Home (up to 6 enrollees) and Family Child Care Home (up to 9 enrollees), both P in RSF and SF-1 through SF-5. Neither is a general home occupation rule.",
      "citation": null,
      "numeric_facts": [],
      "evidence": "Table 500-5, pp.1-11: no home occupation entry. p.3: 'Adult Day Care Home (up to 6 enrollees)' P in RSF and SF-1 to SF-5; 'Family Child Care Home (up to 9 enrollees)' P in RSF and SF-1 to SF-5.",
      "limitations": "Home occupation regulations are likely in Division 700 or definitions in Division 1600, neither of which was provided. Absence from the table is not proof that no standard exists."
    },
    {
      "id": "13356ce3485b20fb76af507269de47c4c9396c231c0ab22bd2f9fee8d36bbc92",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "SF-1 is the 2nd of 17 columns in Table 500-5 (P = permitted; C = Conditional Zoning; -- = prohibited).\n\nPermitted (P) in SF-1:\n- Accessory Apartments (see §710.060)\n- Accessory Use - Short-Term Rental, Whole House (see §710.090; use in principal home)\n- Single-Family Detached (site built or modular)\n- Group Homes, Small (not allowed within 1/2 mile of another group living use property line)\n- Agricultural Operations without livestock\n- Equine Stables accessory to Single-Family residence (see Ch. 7110)\n- Animal Foster Care\n- Adult Day Care Home (up to 6 enrollees)\n- Family Child Care Home (up to 9 enrollees)\n- School, Public or Private\n- Emergency Services\n- Government Office\n- Library and Cultural Exhibits/Museum\n- Public Parks and Open Spaces\n- Religious Assembly\n- Utilities, Minor\n- Wireless Tower or Antenna co-located on an existing building, structure or tower (see Ch. 7170)\n- Small Cell Wireless Tower (P*; must comply with G.S. 160D, Art. 9, Part 3)\n\nConditional Zoning (C) in SF-1:\n- Single-Family Manufactured Home, Class A and Class B (see §1310.050; manufactured home parks not permitted)\n- Group Homes, Large; Special Care Facility; Halfway House (each subject to the 1/2-mile group living separation)\n- Nursing/Skilled Care, Assisted Living, Senior Housing, Independent Living, and Continuing Care Facility\n- Agricultural Operations with Livestock (no livestock or poultry within 150 ft of an adjoining lot line)\n- Greenhouse/Garden Center, Retail (see Ch. 760)\n- Horseback Riding Stables (see Ch. 7110)\n- Bed and Breakfast (see Ch. 740)\n- Golf Course (see Ch. 7160)\n- Recreational Facility, Outdoor\n- Freestanding Wireless Tower (see Ch. 7180)\n- Utilities, Major (see §110.080 and Ch. 770)\n\nProhibited (--) in SF-1: all other listed uses. Examples include multi-unit apartments, townhouses, two-family dwellings, upper-story residential, boarding/rooming houses, wholesale greenhouses, veterinarian offices, kennels, hospitals, cemeteries, and all commercial and industrial uses.\n\nNote 1 adds supplementary requirements from Division 700.",
      "citation": "Indian Trail UDO Division 500, Table 500-5 Table of Permitted Uses (Updated/Approved 1/13/2026), pp.1-11 and Notes 1-4",
      "numeric_facts": [
        {
          "field": "group_living_separation",
          "value": 0.5,
          "unit": "miles",
          "condition": "Small/large group homes, special care facility, halfway house: not allowed if the property edge is within 1/2 mile of another group living use property line"
        },
        {
          "field": "livestock_setback_from_adjoining_lot_line",
          "value": 150,
          "unit": "feet",
          "condition": "Agricultural operations with livestock (C in SF-1)"
        },
        {
          "field": "adult_day_care_home_max_enrollees",
          "value": 6,
          "unit": "enrollees",
          "condition": "Adult Day Care Home, P"
        },
        {
          "field": "family_child_care_home_max_enrollees",
          "value": 9,
          "unit": "enrollees",
          "condition": "Family Child Care Home, P"
        }
      ],
      "evidence": "p.1: 'P = Permitted Use; C = Conditional Zoning; and \"--\" = Prohibited Use/Not Permitted.' p.1: Single-Family Detached 'P P P P P P --...'. p.1: Single-Family Manufactured Home 'P C -- ...'. p.1: Group Homes, Small 'P P P P P P P'. p.2: Agricultural Operations with Livestock 'P C C C C --'. p.5: Bed and Breakfast 'P C C C C C'. p.6: Golf Course 'P C C C C C C'. p.11 Note 1: Division 700 supplementary regulations.",
      "limitations": "The column assignment is read from PDF text extraction of a 17-column table. Rows were checked to contain 17 tokens, with SF-1 as the 2nd token, but layout misalignment remains possible. The referenced use-specific standards (Division 700, Chs. 740, 760, 7110, 7160, 7170/7180, §1310.050) and the SF-1 district description are not provided, so their additional conditions are not extracted. The table may not list every use (for example, home occupations) that is regulated elsewhere."
    },
    {
      "id": "af332d375f6226acc62d6c1322bec60d93b9825a4ec7e1a538d16ead063231a6",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "A citywide rule for special land uses cannot be established from these sources. Each district chapter lists 'Conditional Uses'. For example, CI lists Automotive Repair and Cleaning, Automotive Servicing, Building Materials and Farm Equipment, Check Cashing Services, and Vehicular, Craft, and Related Equipment Sales. RPI, RM6, RMH and RXH list Bed and breakfast homestay/Airbnb, among others. However, the approval procedure and criteria for conditional uses (Chapter 8) and any supplemental use-specific standards (Chapter 5) are not in the provided text. The sources do contain two related regimes: Specific Plan (SP) districts under 14.404 (Regular and Hybrid SP require at least 1 acre; Text Only SP applies to 5 acres or less; Council approval is legislative; zoning reverts to RR if no site plan or preliminary plat is approved within 3 years) and mobile home park standards in RMH §13.",
      "citation": "Lebanon Zoning Ordinance Title 14, district Land Use tables (Ch. 3); §14.404 SP Specific Plan Districts",
      "numeric_facts": [
        {
          "field": "sp_min_area_regular_hybrid",
          "value": 1,
          "unit": "acres",
          "condition": "Regular or Hybrid Specific Plan"
        },
        {
          "field": "sp_max_area_text_only",
          "value": 5,
          "unit": "acres",
          "condition": "Text Only Specific Plan"
        },
        {
          "field": "sp_expiration",
          "value": 3,
          "unit": "years",
          "condition": "No site plan/preliminary plat approved; reverts to RR"
        }
      ],
      "evidence": "14.404.A: 'A Regular Specific Plan (SP) zoning district may be applied to any property that is 1 acre or more... A Text Only Specific Plan may be applied to a property of 5 acres or less.' 14.404.H: 'within three (3) years... the Zoning will change to RR'. District tables include 'Conditional Uses' columns.",
      "limitations": "The conditional/special use permit procedure and review criteria are not included. The topic scope ('special land uses') is ambiguous relative to these excerpts."
    },
    {
      "id": "ea2a793dcc354ea655783cceec93f69240190c7fcf5fe6c3572e57e1104ab234",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "The general accessory building and ADU standards are in §14.503.A, which is cross-referenced but not provided. The only fragments in the source are district-level:\n- Maximum accessory building height is 2 stories in RS20, RS12, RS9, RS6, RD9, RXH, RM6, RMH, RPI, UC and RPO; 3 stories in CI; N/A in CS and COM; 50 ft in CF.\n- CI accessory buildings: maximum structure area 2,000 sf; front setback 30 ft; corner side setback 10 ft; rear setback 25 ft. CI note (c) says accessory buildings may be residential for employees living on site.\n- In many districts, outbuildings over 250 sf must match the principal building's materials.\n- Detached garages for multifamily, townhouse and residential court uses must meet the accessory building requirements of 14.503.A.\n- In mobile home parks, the mobile home plus its accessory structures may not exceed 50% of the space area.",
      "citation": "Lebanon Zoning Ordinance Title 14, district Lot/Building Development Standards; cross-reference §14.503.A (not provided)",
      "numeric_facts": [
        {
          "field": "accessory_height_max",
          "value": 2,
          "unit": "stories",
          "condition": "RS20/RS12/RS9/RS6/RD9/RXH/RM6/RMH/RPI/UC/RPO"
        },
        {
          "field": "accessory_height_max",
          "value": 3,
          "unit": "stories",
          "condition": "CI"
        },
        {
          "field": "accessory_height_max",
          "value": 50,
          "unit": "ft",
          "condition": "CF"
        },
        {
          "field": "accessory_structure_area_max",
          "value": 2000,
          "unit": "sf",
          "condition": "CI"
        },
        {
          "field": "accessory_front_setback_min",
          "value": 30,
          "unit": "ft",
          "condition": "CI"
        },
        {
          "field": "accessory_corner_side_setback_min",
          "value": 10,
          "unit": "ft",
          "condition": "CI"
        },
        {
          "field": "accessory_rear_setback_min",
          "value": 25,
          "unit": "ft",
          "condition": "CI"
        },
        {
          "field": "outbuilding_material_match_threshold",
          "value": 250,
          "unit": "sf",
          "condition": "Outbuildings over this size match principal building materials (many districts)"
        }
      ],
      "evidence": "RS12 §5: 'Accessory building & Accessory Dwelling Unit (ADU) standards are located in 14.503.A.' CI §5 table: 'Accessory building c ... Structure area (max) 2,000 sf'. RS12 §12.c: 'The materials of outbuildings over 250 sq ft shall match...'",
      "limitations": "§14.503.A, the governing citywide accessory standards (size, setbacks, ADU rules), is not in the provided text. Table layouts are garbled."
    },
    {
      "id": "7c5c35ef636329471bd7808ecb912221ea22e2e215e8f57bf39e59f86fd3a8c8",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Permitted uses in CI:\n- Animal Care, Shelter and Veterinarian Services; Automotive Parking\n- Community Assembly; Community Education\n- Construction Sales and Services; Consumer Repair Services; Convenience Commercial\n- Cultural and Recreation Services\n- Dwelling, Single-Family*\n- Essential Services; Financial, Consultative, and Administrative Services\n- Food and Beverage Services; Food Service Drive-In, Drive-Thru, and Take-Out\n- General Business and Communication Services; General Personal Services; General Retail Trade\n- Health Care Facilities; Hotel and Motel\n- Major Entertainment Services; Minor Entertainment Services; Medical Services\n- Personal and Group Care; Public Services; Undertaking Services\n- Uses envisioned in the South Hartmann Overlay; Uses allowed in the Infill Overlay\n\n*Single-family residential is permitted only as an accessory use or on an existing lot of record on June 6, 2023.\n\nConditional uses: Automotive Repair and Cleaning; Automotive Servicing; Building Materials and Farm Equipment; Check Cashing Services; Vehicular, Craft, and Related Equipment Sales.\n\nProhibited uses: Car washes; Specialty Smoke and Vape Shops; any use not specifically allowed.\n\nRelated use-specific standards:\n- Maximum lot size of 20 acres applies to Vehicular, Craft, and Related Equipment Sales only.\n- Building Materials and Farm Equipment requires 50 ft minimum side and rear setbacks unless screening is provided.",
      "citation": "Lebanon Zoning Ordinance Title 14, CI – Interchange Commercial, §4 Land Uses; §5 notes (a)-(c)",
      "numeric_facts": [
        {
          "field": "vehicle_sales_lot_size_max",
          "value": 20,
          "unit": "acres",
          "condition": "Vehicular, Craft, and Related Equipment Sales only"
        },
        {
          "field": "building_materials_side_rear_setback_min",
          "value": 50,
          "unit": "ft",
          "condition": "Building Materials and Farm Equipment use; exceptions with screening"
        }
      ],
      "evidence": "CI §4 table (pp.1-2). Footnote: '*Single-family residential permitted as an accessory use or on an existing lot of record on June 6, 2023.' Prohibited: 'Car washes... Specialty Smoke and Vape Shops... Any use not specifically allowed'.",
      "limitations": "Use definitions are not provided. The two-column table extraction interleaves the columns, but the lists are recoverable."
    },
    {
      "id": "ad293856f06997ed6d2e69c27ad745df165bb115275198611beebda89d2d2d3d",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "No lot coverage standard appears in the CI district text. The district sets lot size, setbacks, height (5 stories / 65 ft) and accessory structure area (2,000 sf), but nothing positively states that coverage is unregulated. Chapter 5 and other referenced standards are not provided.",
      "citation": "Lebanon Zoning Ordinance Title 14, CI – Interchange Commercial, §§5-6",
      "numeric_facts": [],
      "evidence": "CI §5 Lot Development Standards lists lot size, width, setbacks and accessory structure area only. §6 lists height and façade elements. No coverage entry.",
      "limitations": "Absence of a standard is not positive evidence of no regulation. Coverage-related limits could exist in uncited chapters."
    },
    {
      "id": "00030b651aabb23dac4207807bc674e2dec64663f3a1193b5499d74891a05514",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "No lot coverage or impervious surface standard appears in the RM6 district text. Lot size, width, depth, setbacks, height and frontage are regulated, but nothing positively states that coverage is unregulated.",
      "citation": "Lebanon Zoning Ordinance Title 14, RM6 – Multifamily Residential 6,000, §§5-6",
      "numeric_facts": [],
      "evidence": "RM6 §5 lists lot size (6,000 sf first dwelling / 1,500 sf additional), width, depth and setbacks. §6 lists height 3 stories / 45 ft and frontage 100 ft. No coverage entry.",
      "limitations": "No positive no-standard statement exists. Chapter 5 and §14.503.A are not provided."
    },
    {
      "id": "174aa12f613e108953a4d73669774748688949a24ae044ad235460dd5cd98482",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "Coverage limits apply only within mobile home parks:\n- A mobile home stand may not occupy more than 25% of its lot area.\n- The mobile home plus its accessory structures may not exceed 50% of the space area.\n- Each space must be at least 5,000 sf.\n\nNo general lot coverage standard is stated for other RMH development (single-family, two-family, townhome, residential court).",
      "citation": "Lebanon Zoning Ordinance Title 14, RMH – Mobile Home Park Residential, §13 Development Standards for Mobile Home Parks, 'Spacing of Mobile Homes and Site Coverage'",
      "numeric_facts": [
        {
          "field": "mobile_home_stand_coverage_max",
          "value": 25,
          "unit": "percent",
          "condition": "Of respective lot area; mobile home parks"
        },
        {
          "field": "mobile_home_plus_accessory_coverage_max",
          "value": 50,
          "unit": "percent",
          "condition": "Of respective space area; mobile home parks"
        }
      ],
      "evidence": "RMH p.17: 'Mobile home stands shall not occupy an area in excess of twenty-five (25) percent of the respective lot area. The total area occupied by the mobile home and its accessory structures shall not exceed fifty (50) percent of the respective space area.'",
      "limitations": "These limits apply only to mobile home parks. Coverage for non-MHP development in RMH is not addressed in the text, and that silence is not positive evidence of no regulation."
    },
    {
      "id": "ae5b71a762071fc1ff4ad13acefeda36c514b244fab4eca1a408f88a4268b751",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Minimum lot size in RMH is 6,000 sf for the first dwelling plus 1,500 sf for each additional dwelling.\n\nOther lot dimensions:\n- Minimum lot width is 50 ft (18 ft for Dwelling, Townhome).\n- Minimum lot depth is 100 ft (75 ft for Dwelling, Townhome).\n\nResidential courts, in addition to the district minimums:\n- Lot area at least 20,000 sf\n- Lot width at least 100 ft\n- Lot depth at least 150 ft\n- At most 12 units per lot for a townhouse court and 8 for a cottage court\n\nMobile home parks:\n- At least 3 acres and at least 15 spaces\n- Each space at least 5,000 sf\n- Density at most 7 units per acre\n- Peripheral yards of 40 ft front, 30 ft side and 40 ft rear",
      "citation": "Lebanon Zoning Ordinance Title 14, RMH – Mobile Home Park Residential, §5 Lot Development Standards & notes (a),(b); §12.a; §13",
      "numeric_facts": [
        {
          "field": "lot_size_min_first_dwelling",
          "value": 6000,
          "unit": "sf",
          "condition": "General"
        },
        {
          "field": "lot_size_min_additional_dwelling",
          "value": 1500,
          "unit": "sf",
          "condition": "Per additional dwelling"
        },
        {
          "field": "lot_width_min",
          "value": 50,
          "unit": "ft",
          "condition": "General"
        },
        {
          "field": "lot_width_min",
          "value": 18,
          "unit": "ft",
          "condition": "Dwelling, Townhome"
        },
        {
          "field": "lot_depth_min",
          "value": 100,
          "unit": "ft",
          "condition": "General"
        },
        {
          "field": "lot_depth_min",
          "value": 75,
          "unit": "ft",
          "condition": "Dwelling, Townhome"
        },
        {
          "field": "lot_area_min",
          "value": 20000,
          "unit": "sf",
          "condition": "Residential court"
        },
        {
          "field": "lot_width_min",
          "value": 100,
          "unit": "ft",
          "condition": "Residential court"
        },
        {
          "field": "lot_depth_min",
          "value": 150,
          "unit": "ft",
          "condition": "Residential court"
        },
        {
          "field": "park_area_min",
          "value": 3,
          "unit": "acres",
          "condition": "Mobile home park"
        },
        {
          "field": "park_spaces_min",
          "value": 15,
          "unit": "spaces",
          "condition": "Mobile home park"
        },
        {
          "field": "space_size_min",
          "value": 5000,
          "unit": "sf",
          "condition": "Each mobile home space"
        },
        {
          "field": "density_max",
          "value": 7,
          "unit": "units/acre",
          "condition": "Mobile home park"
        }
      ],
      "evidence": "RMH §5: 'Lot size (min) First dwelling 6,000 sf / Additional dwelling 1,500 sf / Lot width (min) a 50 ft / Lot depth (min) b 100 ft'. Notes '(a) 18 ft minimum lot width for Dwelling, Townhome use. (b) 75 ft minimum lot depth...'. §13: 'No space shall be smaller than five thousand (5,000) square feet.'",
      "limitations": "The table text is garbled, but the values align with the footnotes."
    },
    {
      "id": "afb0f4420c6e54623988ae62c00fd429d2beaf29cb0991b995a479c66f830851",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Permitted uses in RPI:\n- Automotive, Parking\n- Community Assembly; Community Education; Convenience Commercial; Cultural and Recreational Services\n- Dwelling, Single-Family Detached; Dwelling, Two-Family Detached; Dwelling, Townhome; Dwelling, Residential Court\n- Dwelling, Multifamily*\n- Dwelling, Apartment Hotel\n- Essential Services; Financial, Consulting, and Administrative; Food and Beverage Service\n- General Business and Communication Services; General Personal Services\n- Hotel and Motel; Medical Services; Personal and Group Care Facilities; Public Services\n- Uses allowed in the Infill Overlay; Uses envisioned in the South Hartmann Overlay\n\n*A multifamily building may have at most 4 units, with at most 1 multifamily building per parcel.\n\nAlso, residential parcels may not exceed 85% of the total area of all development parcels in each RPI polygon.\n\nConditional use: Bed and breakfast homestay/Airbnb.\n\nProhibited uses: Specialty and Smoke Shops; any use not specifically allowed.",
      "citation": "Lebanon Zoning Ordinance Title 14, RPI – Residential, Public, Institutional, §4 Land Uses and footnote",
      "numeric_facts": [
        {
          "field": "residential_parcel_area_max",
          "value": 85,
          "unit": "percent",
          "condition": "Of total development parcel area per RPI polygon"
        },
        {
          "field": "multifamily_units_per_building_max",
          "value": 4,
          "unit": "units",
          "condition": "Dwelling, Multifamily"
        },
        {
          "field": "multifamily_buildings_per_parcel_max",
          "value": 1,
          "unit": "buildings",
          "condition": "Dwelling, Multifamily"
        }
      ],
      "evidence": "RPI §4: 'the total area of residential parcels cannot exceed 85% of the total area of all development parcels in each polygon'. Footnote: '*The maximum number of units in a multifamily building shall be four (4). The maximum number of multifamily buildings on a parcel shall be one (1).'",
      "limitations": "Use definitions are not provided. The prohibited entry reads 'Specialty and Smoke Shops' as printed."
    },
    {
      "id": "5931db5452f86bf9c4ac2b4f0217006fdd0d8decb2f7d406e649dc8bd5549351",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "No lot coverage standard appears in the RS12 district text. Lot size, width, setbacks and height (3 stories; accessory 2 stories) are regulated, but nothing positively states that coverage is unregulated.",
      "citation": "Lebanon Zoning Ordinance Title 14, RS12 – Single-Family Residential 12,000, §§5-6",
      "numeric_facts": [],
      "evidence": "RS12 §5 lists lot size 12,000 sf, width 75/40 ft and setbacks. §6 lists height only. No coverage entry. The document ends with a blank page 8.",
      "limitations": "Silence is not positive evidence of no regulation. §14.503.A and Chapter 5 are not provided."
    },
    {
      "id": "bc2e5fe30ba8d160c2a3c9a836a8d80fec37a7f81b493c3f87ff877a9fe60eea",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Maximum primary building height in RXH is 3 stories and 45 ft. Maximum accessory building height is 2 stories.\n\nQualifications:\n- Residential courts are limited to 2 stories / 35 ft.\n- Any portion of a building within 75 ft of adjacent single-family housing may not exceed 1.5 times the actual height of those houses.\n- For multifamily, townhouse and residential court development within 75 ft of an existing residential building, height must step up at no more than 1 ft of added height per 3 ft of separation. Existing buildings are assumed to be 15 ft tall unless measured.",
      "citation": "Lebanon Zoning Ordinance Title 14, RXH – Mixed Housing, §6.a; §10.b; §12.b; §13.b; §14.a.v, §14.d",
      "numeric_facts": [
        {
          "field": "primary_height_max",
          "value": 3,
          "unit": "stories",
          "condition": "General"
        },
        {
          "field": "primary_height_max",
          "value": 45,
          "unit": "ft",
          "condition": "General"
        },
        {
          "field": "accessory_height_max",
          "value": 2,
          "unit": "stories",
          "condition": "Accessory building"
        },
        {
          "field": "residential_court_height_max",
          "value": 2,
          "unit": "stories",
          "condition": "Residential court"
        },
        {
          "field": "residential_court_height_max",
          "value": 35,
          "unit": "ft",
          "condition": "Residential court"
        },
        {
          "field": "transition_multiplier_max",
          "value": 1.5,
          "unit": "ratio",
          "condition": "Within 75 ft of adjacent single-family housing"
        },
        {
          "field": "transition_rate",
          "value": 3,
          "unit": "ft separation per 1 ft added height",
          "condition": "MF/townhouse/residential court within 75 ft of existing residential building"
        },
        {
          "field": "assumed_existing_height",
          "value": 15,
          "unit": "ft",
          "condition": "Unless measurements provided"
        }
      ],
      "evidence": "RXH §6 table: 'Primary building height, stories (max) 3 ... Primary building height, feet (max) 45 ... Accessory building height, stories (max) 2'. §14.a.v: 'Building Height: 2 stories / 35 feet'. §10.b: 'shall not exceed the actual height of those houses by more than 1.5 times.'",
      "limitations": "The table layout is garbled, but the values are unambiguous. The height measurement method is defined elsewhere and not provided."
    },
    {
      "id": "7925528761f1f8eb51b26e89ccd89c94736650fbe613a3853db04f19006c575c",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "This UDO does not establish a standalone 'CU' district. Conditional zoning districts parallel each Residential or Mixed-Use/Nonresidential base district. Under §3.4.4, no use is permitted in a conditional district except in accordance with the conditions imposed in its approval. Permitted uses are limited to those allowed in the corresponding base district under Table 4-1, unless voluntary written conditions restrict them further. Conditions may not be less restrictive than the UDO (§3.4.5.B). Unmodified base-district standards continue to apply (§3.4.5.A). There is no fixed district-wide use list; uses are set case by case through the approved Concept Plan and conditions (§2.5.4.C.8.a).",
      "citation": "UDO §3.4.2, §3.4.4, §3.4.5; §2.5.4.C.8.a; §1.9.5; Table 1-1",
      "numeric_facts": [],
      "evidence": "p.157 §3.4.4: 'No use shall be permitted within a conditional zoning district except as in accordance with the conditions imposed... limited to those allowed in the corresponding base zoning district in accordance with Table 4-1... unless restricted through voluntary written conditions.' p.52 §2.5.4.C.8.a: 'approved Concept Plan and conditions shall constitute the standards for the approved conditional zoning district.' p.25 Table 1-1: 'Conditional zoning districts approved under the prior zoning ordinance shall continue in effect.'",
      "limitations": "The abbreviation 'CU' is not defined in the excerpts. I treated it as the conditional zoning district category; it could instead mean former conditional use districts carried forward under §1.9.5 and Table 1-1, which are governed by their prior approvals and Special Use Permits rather than by this text. The designation is also inconsistent: §3.4.2 uses a 'C' prefix (e.g., C-CC) and §2.5.4 uses a 'C' suffix. Uses for any specific CU parcel depend on its approval documents, which were not provided."
    },
    {
      "id": "8a7f910704b52abc71583ce56e66a9f3c9f921eb14f271ed897b55118037af93",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "Unresolved. The extracted text of Table 4-1 lost its column alignment, so most HMV cells for residential uses cannot be read reliably. The most probable readings are below, but none is confirmed:\n- Single-Family Detached Dwelling: probably P (permitted), subject to §4.3.3.B.8.\n- Family Care Home: probably P.\n- Accessory Dwelling Unit: probably A (accessory only), subject to §4.3.7.B.1.\n- Duplex, Cottage Development, Attached Residential, Multi-Family, Group Living uses: cannot be determined.\nAll residential development in HMV must also meet the §3.2.6.E design standards.",
      "citation": "UDO Table 4-1 (pp.184, 188); §4.2.1.B; §3.2.6.A, C, E",
      "numeric_facts": [
        {
          "field": "density_max",
          "value": 7,
          "unit": "du/acre",
          "condition": "HMV, all uses (Table 3-7); context only"
        }
      ],
      "evidence": "p.184 Table 4-1 columns: RC RLS RLI RG HMV TN TD DE CM CC HLI IN PD. The 'Single-Family Detached Dwelling' row shows six consecutive P's then a gap ('P P P P P P      P ... P'), consistent with RC through TN being P. The 'Accessory Dwelling Unit' row (p.188) shows 'A A A A A A    A'. p.130 §3.2.6.A: HMV is intended to 'plan for new single family residential infill construction.' The Duplex, Cottage, and Attached rows have spacing too ambiguous to place cells.",
      "limitations": "Column positions were lost in text extraction, and blank cells (prohibited) cannot be placed with confidence. The original table layout is needed to verify each HMV cell. The HPO overlay may impose further limits (§4.1.3)."
    },
    {
      "id": "6a33059c7819586455a4243b4ffab263bfd9b42b484877aecd58944fa6f7e7d4",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "The UDO sets no fixed minimum front, side, or rear setbacks for the PD district. Setbacks are 'As established for the planned development in the PD Plan and PD Agreement' (Table 3-15). The PD Plan must state the dimensional standards that apply (§3.5.2.E.1.iv). Where relevant, it must also include perimeter standards that keep development compatible with adjacent development (§3.5.2.E.1.v). For campus-style PDs next to a Residential base district, building massing and height must step down along the perimeter (§3.5.2.G.2.d). Perimeter buffers are required along the district boundary but not between internal uses (§3.5.2.G.1.d, G.2.c).",
      "citation": "UDO §3.5.2.D, Table 3-15; §3.5.2.E.1.iv–v; §3.5.2.G",
      "numeric_facts": [
        {
          "field": "district_area_min",
          "value": 10,
          "unit": "acres",
          "condition": "PD with residential/mixed use; reducible to 5 acres with public lake access (§3.5.2.G.1.a)"
        },
        {
          "field": "district_area_min",
          "value": 40,
          "unit": "acres",
          "condition": "campus-style PD (§3.5.2.G.2.a)"
        }
      ],
      "evidence": "p.160 Table 3-15: 'Front setback, min / Side setback, min / Rear setback, min — As established for the planned development in the PD Plan and PD Agreement in accordance with the requirements in this chapter.' p.161 §3.5.2.E.1.iv: 'The dimensional standards that apply in the planned development district.'",
      "limitations": "Actual setbacks depend on each PD's adopted Plan and Agreement, which were not provided. Use-specific setbacks in Chapter 4 may also apply unless modified under Table 3-16."
    },
    {
      "id": "fb78308957a9145b0f04a226a4e25cfe0119c392ca292b3d6d64c5e7d1f5bcb9",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "RLI minimum lot area is 10,000 sf for all uses, with a maximum density of 3 du/acre. Related dimensional standards are a minimum lot width of 40 ft at the right-of-way and 70 ft at the front setback. Use-specific rules:\n- Duplex: minimum lot size per unit is 0.75 × the single-family detached minimum, i.e., 7,500 sf per unit (§4.3.3.B.3.a.i).\n- Cottage development: site minimum 0.5 acre, at least 4 dwellings; individual lots, if used, at least 4,000 sf; density up to 1.5 × district maximum (§4.3.3.B.2).\n- Attached residential: minimum lot width 16 ft (§4.3.3.B.1.a.i).",
      "citation": "UDO §3.2.4.D, Table 3-5 (p.127); §4.3.3.B.2, B.3",
      "numeric_facts": [
        {
          "field": "lot_area_min",
          "value": 10000,
          "unit": "sq ft",
          "condition": "RLI, all uses"
        },
        {
          "field": "density_max",
          "value": 3,
          "unit": "du/acre",
          "condition": "RLI"
        },
        {
          "field": "lot_width_row_min",
          "value": 40,
          "unit": "ft",
          "condition": "at right-of-way"
        },
        {
          "field": "lot_width_setback_min",
          "value": 70,
          "unit": "ft",
          "condition": "at front setback"
        },
        {
          "field": "lot_area_min_per_unit",
          "value": 7500,
          "unit": "sq ft",
          "condition": "duplex (0.75 × 10,000)"
        },
        {
          "field": "lot_area_min",
          "value": 4000,
          "unit": "sq ft",
          "condition": "cottage development individual lots"
        },
        {
          "field": "site_area_min",
          "value": 0.5,
          "unit": "acres",
          "condition": "cottage development site"
        }
      ],
      "evidence": "p.127 Table 3-5 RLI: 'Lot area, min 10,000 sf'; 'Density, max (du/acre) 3'; 'Lot width at right-of-way, min (ft) 40'; 'Lot width at front setback, min (ft) 70'. p.194 §4.3.3.B.3.a.i: 'minimum lot size, per unit, shall be 0.75 times the minimum lot size required for a single-family detached dwelling.' p.193 §4.3.3.B.2.a: '0.5 acres... at least four dwellings'; 'minimum lot area of 4,000 square feet.'",
      "limitations": "Conservation subdivision (Ch. 6) and WPO overlay lot-size rules were not in the excerpts and may alter these minimums. Administrative adjustments do not apply to lot area."
    },
    {
      "id": "ef3f9c1f5633a22278b8a310724fa0406939ab31ec229c9041f8856f525243e3",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "RLS maximum building height is 3 stories for all uses. Under the story definition, a residential story may be at most 12 ft (15 ft for office or mixed-use), except the ground floor and atriums, lobbies, or similar features. Height is measured from the lowest point along the front finished grade to the flat-roof surface, mansard deck line, or average of eave and ridge for pitched roofs. Exceptions and related limits:\n- Roof-mounted solar may extend up to 5 ft above the maximum height.\n- Water towers may exceed the maximum height with 1 ft of extra setback per 2 ft of excess.\n- Accessory structures may not exceed the principal structure's height or the district maximum.\n- Non-occupiable structures are measured at 15 ft per story.",
      "citation": "UDO §3.2.3.D, Table 3-4 (p.125); §9.2.1.C.3, C.5, C.8; §4.3.4.E.4.b; §4.3.4.E.8.iv; §4.3.7.A.3, B.2.b",
      "numeric_facts": [
        {
          "field": "building_height_max",
          "value": 3,
          "unit": "stories",
          "condition": "RLS, all uses"
        },
        {
          "field": "story_height_max",
          "value": 12,
          "unit": "ft",
          "condition": "residential structure, excluding ground floor/atriums etc."
        },
        {
          "field": "story_height_max",
          "value": 15,
          "unit": "ft",
          "condition": "office or mixed-use structure"
        },
        {
          "field": "solar_roof_extension_max",
          "value": 5,
          "unit": "ft",
          "condition": "above district max height"
        }
      ],
      "evidence": "p.125 Table 3-4 RLS: 'F Building height, max (stories) 3'. p.557 §9.2.1.C.5: 'The maximum story height in a residential structure shall be 12 feet.' p.208 §4.3.4.E.4.b: 'may extend up to five feet above the maximum building height.'",
      "limitations": "No feet-based maximum is stated for RLS; any feet equivalent is derived from the story definition. Overlay district limits were not reviewed."
    },
    {
      "id": "345dd317455d5ea43ca5eb67048c7998168704bb2f8085fa62950fdda3bb0bac",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "Cannot be reliably determined from the supplied excerpts. The CW City West district regulations (Section 3.1.30) are not included. The front-matter Use Matrix has a CW column, but the text extraction does not preserve column alignment. The matrix also states that Section 3.1 controls in any conflict.",
      "citation": null,
      "numeric_facts": [],
      "evidence": "Use Matrix, pp. xi-xviii: 'Consult Section 3.1 as certain conditions and standards may apply. If there are any conflicts between this table and the uses listed in Section 3.1, the latter will control.' EXO page 3-33: 'See the underlying zoning district CW City West for Principal Permitted uses, standards and regulations (Section 3.1.30)'. That section is not in the excerpts.",
      "limitations": "Section 3.1.30 (CW), Section 3.33 (CW Required Conditions) and Section 3.34 (MDO) are absent. The Use Matrix is non-controlling, and its column layout is garbled in the extracted text, so CW cells cannot be attributed reliably."
    },
    {
      "id": "fcc973384bf0d24c14fcf6459db3abe5acf0e71431b7c52595846d59455d4a4f",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "NCC minimum lot area is 2 acres and minimum lot width is 200 ft. Maximum lot coverage is not stated here; it is referred to Section 3.6.2.D. The district table adds notes C, D, E, L, M, P and Q of Section 3.6.2, and Section 3.16 (NCC Required Conditions), which may add qualifications.",
      "citation": "Novi Zoning Ordinance §3.1.20.D (p. 3-47); District Summary Table (p. xx)",
      "numeric_facts": [
        {
          "field": "min_lot_area",
          "value": 2,
          "unit": "acres",
          "condition": "NCC district"
        },
        {
          "field": "min_lot_width",
          "value": 200,
          "unit": "ft",
          "condition": "NCC district"
        }
      ],
      "evidence": "§3.1.20.D, p. 3-47: 'Lot Size Minimum lot area: 2 acres; Minimum lot width: 200 ft; Lot Coverage Maximum lot coverage: See Section 3.6.2.D'. The Notes say 'refer to Section 3.6.2 Notes to District Standards: C, D, E, L, M, P, and Q'. The District Summary Table on p. xx agrees: 'NCC Non-Center Commercial 2 acres 200 ft'.",
      "limitations": "The Section 3.6.2 notes and Section 3.16 NCC Required Conditions are not in the excerpts and may contain exceptions or modifications. Residential uses in NCC follow RM-1, RT or R-4 standards (§3.1.20.C), and those lot standards may differ."
    },
    {
      "id": "a10c34c1a0821ebb80a41ee4d4b126edecc774d28c5b13b6e597d94419ba0f6e",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "RM-1 lists two special land uses: (i) convalescent homes, assisted living facilities, hospice care facilities and child care centers, subject to §4.21; and (ii) accessory buildings and uses customarily incident to any of the above permitted uses (§4.19).",
      "citation": "Novi Zoning Ordinance §3.1.7.C (p. 3-16), as amended by Ord. No. 18.282, Pt. III, 7-08-2019",
      "numeric_facts": [],
      "evidence": "§3.1.7.C SPECIAL LAND USES, p. 3-16: 'i. Convalescent homes, assisted living facilities, hospice care facilities and child care centers §4.21; ii. Accessory buildings and uses §4.19 customarily incident to any of the above permitted uses'. Page footer: '(Amended by Ord. No. 18.282, Pt. III, 7-08-2019)'.",
      "limitations": "The use-specific conditions in §4.21 and §4.19, the RM-1/RM-2 Required Conditions in §3.8, and the special land use procedures are not in the excerpts. This answer lists the uses only, not their approval conditions."
    },
    {
      "id": "b7d9b5291ac883b700381cc30bdd6de4063ec991678ea5211191130b4c09ac1c",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "Cannot be determined from the supplied excerpts. The excerpts end partway through the TC district development standards (p. 3-57). The TC-1 district page (Section 3.1.26) and Section 3.27 (TC and TC-1 Required Conditions) are not included.",
      "citation": null,
      "numeric_facts": [],
      "evidence": "Table of contents: 'Sec. 3.27 TC and TC-1 District Required Conditions 3-127'. District Summary Table, p. xx: 'TC-1 Town Center -1 ... See Section 3.27.1.C'. Neither section's text is in the excerpts.",
      "limitations": "No TC-1 height text is present. The TC standards are cut off and cannot be substituted for TC-1."
    },
    {
      "id": "ab37fb4608d2f2aa50113cc4a05b7bc7640b372d9165e6ac5756f77e26dc7595",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "A township-wide parking answer cannot be reliably extracted. Section 27.04(A) is only partly provided, and the Off-Street Parking Chart (use-by-use ratios and dimensions) is omitted. The provided general provisions say:\n- Parking applies to new buildings and uses as required by district regulations.\n- Added intensity requires added parking.\n- A change of use requires parking for the new use, regardless of any prior variance.\n- Existing parking may not be reduced below requirements.\n- Required calculations go on the plot or site plan.\n- The Planning Commission may allow less parking than required, with the remaining area banked as open space for future parking.\n- EV charging stations accessory to a principal use are allowed in all districts. They may count toward required parking and are sized as standard spaces. Outlets must be 26 to 48 inches high. Curbing may replace bollards if the charger is set back at least 24 inches from the curb face.\n- Stand-alone for-profit EV charging is allowed only in districts that permit automobile service centers.\n- Off-premise storage of a travel trailer or motor home is restricted to LI-zoned parcels.",
      "citation": "Orion Twp. Zoning Ord. 78, §27.04(A)(1)(a)-(f), §27.04(C)(2)(c)(ii), pp. 27-19 to 27-21, 27-29",
      "numeric_facts": [
        {
          "field": "ev_outlet_min_height",
          "value": 26,
          "unit": "inches",
          "condition": "EV charging outlets/connectors, measured from the mounting surface"
        },
        {
          "field": "ev_outlet_max_height",
          "value": 48,
          "unit": "inches",
          "condition": "EV charging outlets/connectors"
        },
        {
          "field": "ev_curb_setback_min",
          "value": 24,
          "unit": "inches",
          "condition": "when curbing is used instead of bollards"
        }
      ],
      "evidence": "§27.04(A)(1)(e), p.27-20: \"The Planning Commission may allow a lesser amount of parking than required by this Ordinance. An area ... may be banked.\" §27.04(A)(1)(f)(ii), p.27-20: EV stations \"may be included in the calculation of minimum required off-street parking spaces.\"",
      "limitations": "The excerpt cuts off after the EV provisions (p.27-21) and resumes at the stall-dimension table footer (p.27-24). The township Off-Street Parking Chart, space dimensions, shared-parking rules and other special parking provisions are missing. District-specific ratios exist in the district articles but are not a township-wide answer."
    },
    {
      "id": "e03725ea882a2b97da6a9b97f0f65c9f03986d0f71a311bc6e5806828a47efb4",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "No accessory dwelling unit provision appears in the provided excerpts, and none of them states positively that ADUs are unregulated or prohibited township-wide. Related provisions in the excerpts:\n- Basement residency is expressly prohibited.\n- Temporary structures (garages, barns, trailers and similar) may not be used as a dwelling unit without ZBA approval, or compliance with §27.04(C)(2)(a).\n- Temporary residential use is approvable only while a disaster-damaged dwelling is repaired, for up to 3 months plus a 3-month extension.\n- Accessory buildings may not be used for commercial operations other than home occupations.\n- The lakefront second-garage exception bars overnight habitation.",
      "citation": "Orion Twp. Zoning Ord. 78, §27.02(A)(1)(e), (A)(7), (C)(1)-(3), (H), pp. 27-11, 27-12, 27-14, 27-15, 27-17",
      "numeric_facts": [
        {
          "field": "temporary_residential_use_initial_max",
          "value": 3,
          "unit": "months",
          "condition": "ZBA approval while a disaster-damaged principal dwelling is repaired; one extension of up to 3 months"
        }
      ],
      "evidence": "§27.02(H), p.27-17: \"Basement residency is expressly prohibited in this Township.\" §27.02(C)(1), p.27-14: a temporary structure, including a garage or barn, \"shall not be used as a dwelling unit ... without the approval of the Zoning Board of Appeals.\"",
      "limitations": "The excerpts omit Article II definitions, the single-family district use lists (Articles V and VI) and much of Article XXVII. ADU or accessory-dwelling rules may exist there. The absence of a provision is not treated as no_standard."
    },
    {
      "id": "bde88fba92c760f438c939a20cc24336b36591328f5c91e59eac626d5397ed27",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "BIZ (Brown Road Innovation Zone) land and buildings may be used only for the Table 34-1 use groups.\n\nType A (Residential, Child Care, Health Care, Public):\n- Uses: single-family and multi-family residential; child care centers; senior assisted living; public, semi-public and parks; essential public services and their buildings; hospitals, medical offices and clinics; radio, TV and telephone transmission towers; colleges and commercial schools.\n- Ancillary uses allowed: restaurants; banks and credit unions (with or without drive-thru); convenience store without gas; upper-floor residential; outdoor patio.\n- Ancillary uses by special land use: drive-thrus other than banks; convenience store with gas; auto wash; outdoor café; places of worship.\n\nType B (Commercial):\n- Ancillary uses allowed without special land use approval: restaurants without drive-thru; banks and credit unions; convenience store without gas; upper-floor residential; office and retail; multi-tenant shopping centers; outdoor patio.\n- By special land use: drive-thrus; convenience store with gas; auto wash; outdoor café.\n\nType C (Regional Commercial):\n- Uses: auto dealerships; large retail over 55,000 sq ft; multi-tenant centers over 55,000 sq ft; building and lumber supply and garden centers; office buildings; hospitals and medical complexes; hotels and motels with conference, banquet or restaurant space totaling at least 5,000 sq ft.\n- Ancillary uses allowed without special land use approval: restaurants without drive-thru; office and retail; banks with drive-thru; convenience store without gas; upper-floor residential; outdoor patio.\n- By special land use: drive-thrus; auto service and body repair; convenience store with gas; auto wash; animal kennel boarding, pet day care and grooming; outdoor café.\n\nType D (Research and Development/Industrial):\n- Uses: computer and IT services; corporate offices; experimental R&D and testing labs; life science and medical labs; incubator workshops; manufacturing, processing and stamping; printing; tool and die, gauge and machine shops; truck rental, truck terminals and distribution; warehousing and wholesale; indoor mini-storage with centralized access; indoor commercial recreation.\n- By special land use: contractor's equipment storage and storage yards; RV storage; indoor mini-storage without centralized access.\n\nConditions:\n- Ancillary and support uses are allowed only with larger-scale planned developments over 10 acres.\n- Ancillary or stand-alone commercial uses in Types A to C require a multi-tenant planned development of at least 10 acres. They may be built only after the primary use has building permits, and a development agreement is required. The Planning Commission may waive the multi-tenant and 10-acre requirement for economic-development projects.\n- Special land uses follow §34.02 and §30.02.\n\nNot permitted (Table 34-2): adult regulated uses; salvage and junk yards; asphalt plants; cement plants; extractive uses; commercial and industrial incinerators; slaughterhouses and rendering; waste processing; composting; bulk petroleum.\n\nUnlisted uses may be allowed on the Planning & Zoning Director's positive recommendation that they are clearly similar or compatible, or by referral to the Planning Commission under §27.02(E).\n\nBIZ requirements apply in addition to those of the corresponding zoning district, as determined by the Planning Commission, and supersede them where they conflict.",
      "citation": "Orion Twp. Zoning Ord. 78, §34.01(A)-(E), Tables 34-1 and 34-2, pp. 34-1 to 34-3",
      "numeric_facts": [
        {
          "field": "min_planned_development_area_for_ancillary_uses",
          "value": 10,
          "unit": "acres",
          "condition": "ancillary or support uses and ancillary/stand-alone commercial in Types A-C; Planning Commission may waive"
        },
        {
          "field": "large_scale_retail_threshold",
          "value": 55000,
          "unit": "sq ft",
          "condition": "Type C large-scale retail and multi-tenant centers (over)"
        },
        {
          "field": "hotel_min_combined_conference_banquet_restaurant_area",
          "value": 5000,
          "unit": "sq ft",
          "condition": "Type C hotels/motels"
        }
      ],
      "evidence": "§34.01(B), p.34-1: \"Use and development of land and buildings shall only be for the following use groups ... Ancillary uses or support uses shall only be allowed in conjunction with larger-scale projects involving planned developments of over ten (10) acres.\" Table 34-2, p.34-3 lists the NP uses.",
      "limitations": "§34.02 special land use standards are truncated. The text gives no explicit P/S designation for Type B core uses beyond the listed categories. The uses are \"examples ... including or similar to.\""
    },
    {
      "id": "780db8cd7418126b821fc0725001f7a7a3783c7cea56783ad9c4737b8b40703e",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "GB use matrix. Unless otherwise permitted as a special use, a single-tenant retail or service establishment may not exceed 55,000 sq ft GFA.\n\nPermitted by right (P):\n- Health clubs; small-scale private indoor recreation (yoga, karate, dance); bowling alleys; theaters and arenas (one-story, free-standing, fully enclosed; fn B).\n- Automobile parts and accessories; auto dealerships, used car sales and showrooms (fn K: inventory parking shown on the site plan and excluded from required parking); auto repair, service centers and other automotive retail without gasoline; auto wash (enclosed, sewers required, stacking area; fn C); RV sales and service.\n- Bar/lounge; outdoor patio (administrative review; fn E); restaurant without drive-thru; catering and food storage lockers.\n- Day-to-day consumer goods; grocery; furniture and appliance stores; florists, nurseries and garden shops; home improvement and hardware under 55,000 sq ft; lumber yard; neighborhood convenience store without gas; pharmacy with or without drive-thru (fn A, I); specialty food; outdoor display areas (fn G: no more than 10% of the building or 1,000 sq ft, whichever is less, with administrative permit); showrooms of a plumber, electrician or building contractor.\n- Dry cleaning and laundromats; printing and publishing under 10,000 sq ft; printing, copying and shipping stores; general appliance repair; banks with or without drive-thru (fn A, I); personal service; pet grooming and daycare (fn H: fully enclosed, no outdoor runs); real estate and property management; travel and ticket agencies.\n- Professional and medical offices; veterinary clinics and hospitals (fn H).\n- Music, dance, business and trade schools; private for-profit schools; public service and government facilities; private clubs, lodges, banquet halls and places of worship; public transportation facilities; PUD (§30.03).\n- Accessory: outdoor storage (§27.19); accessory buildings and uses (§27.02); accessory outdoor uses up to 25% of the principal use area (P/S follows the principal use).\n\nSpecial use (S):\n- Large-scale private indoor recreation (court sports, billiards, skating rinks, laser tag).\n- Gasoline and fuel stations.\n- Outdoor café (fn D).\n- Drive-thru restaurant (fn A, I).\n- Conference, meeting and banquet facilities.\n- Large-scale retail over 55,000 sq ft (fn F, §27.16).\n- Hotel/motel.\n- Overnight pet boarding and kennels.\n- Emergency or extended-hour medical clinics (fn A).\n- Extended-hour uses (fn A).\n\nSpecial use only within the Lapeer Road Overlay (S*):\n- Showrooms with on-site fabrication, processing or wholesaling (fn J).\n- Mini-storage and warehousing (fn J).\n\nFootnote A (extended-hour uses and drive-thrus):\n- Buildings, canopies and speaker boxes at least 100 ft from single-family or multi-family zoned or used lot lines; parking and drive lanes at least 50 ft.\n- A 6 ft continuous buffer where abutting single-family.\n- Noise at most 60 dB at the property line.\n- Light at most 0.3 fc at the single-family line, and 0.0 fc from dusk to dawn.\n\nSimilar uses may be allowed under §27.02(E).",
      "citation": "Orion Twp. Zoning Ord. 78, §14.01 Use Matrix and §14.02 Footnotes A-K, pp. 14-1 to 14-4 (Revised 10/06/25)",
      "numeric_facts": [
        {
          "field": "max_single_tenant_retail_service_gfa",
          "value": 55000,
          "unit": "sq ft",
          "condition": "unless permitted as a special use"
        },
        {
          "field": "outdoor_display_max_area",
          "value": 1000,
          "unit": "sq ft",
          "condition": "or 10% of the building, whichever is less"
        },
        {
          "field": "accessory_outdoor_area_max",
          "value": 25,
          "unit": "percent",
          "condition": "of the area occupied by the principal use"
        },
        {
          "field": "drive_thru_extended_hours_building_setback_from_residential",
          "value": 100,
          "unit": "ft",
          "condition": "fn A"
        },
        {
          "field": "drive_thru_extended_hours_parking_lane_setback_from_residential",
          "value": 50,
          "unit": "ft",
          "condition": "fn A"
        }
      ],
      "evidence": "§14.01, p.14-1: \"Unless otherwise permitted as a special use, retail or service establishments shall not exceed fifty-five thousand (55,000) square feet in gross floor area for a single tenant.\" Matrix rows on pp.14-1 and 14-2, e.g. \"Gasoline/fuel service stations S\" and \"Grocery store P\".",
      "limitations": "Article XIV pages show \"Revised 10/06/25\", while other articles show 11/06/25. §27.16 and §30.02 standards are not reviewed. Lapeer Road Overlay boundaries are not provided."
    },
    {
      "id": "41f509d467c4d951dbbbfa2c0f3f1a116708541ecd05ba7b956555e97b1ca5a3",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "The maximum height of all structures in GB is 25 ft, and it applies to principal and accessory uses. The Schedule of Regulations also lists 25 ft for GB.\n\nDetached accessory buildings in non-residential districts must conform to the principal-building height requirement. Any detached accessory building taller than the principal building as constructed may not be located in the front yard.",
      "citation": "Orion Twp. Zoning Ord. 78, §14.04 (p.14-7); Art. XXVI Schedule of Regulations (p.26-3); §27.02(A)(5) (p.27-12)",
      "numeric_facts": [
        {
          "field": "max_height_all_structures",
          "value": 25,
          "unit": "ft",
          "condition": "GB, principal and accessory structures"
        }
      ],
      "evidence": "§14.04, p.14-7: \"Maximum Heights of All Structures 25 ft.\" Article XXVI, p.26-3: GB \"25 ft.\"",
      "limitations": "Township-wide height exceptions (chimneys, towers and similar), the definition of height and any story limit are not in the excerpts. Flagpoles other than official flags are limited to 1.5 times the building height under the sign ordinance §4(G)."
    },
    {
      "id": "79c9dcb17dcb383cacd2b3f5a3f86d851d6cb314c069dd5169da7179a15411b1",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "IP use matrix.\n\nPermitted by right (P):\n- Compounding, manufacture, assembly, treatment, repair, processing and packaging of:\n  - electrical appliances and electronics;\n  - electronic or neon signs and light sheet metal products;\n  - previously prepared materials such as canvas, cloth, glass, leather, paper, plastics, metals, textiles, millwork, wood and sheet metal, but not large stamping plants or saw mills;\n  - pottery and ceramics using previously pulverized clay or electric/gas kilns;\n  - bakery goods, candy, food, cosmetics, pharmaceuticals, toiletries, hardware and cutlery;\n  - musical instruments, toys, novelties and stamps and small molded rubber products.\n- Storage buildings, repair facilities and yards for contractors, landscaping, lawn services and RVs (fn A, §27.19).\n- Packaging and parcel delivery; printing plants; tool, die, gauge and machine shops.\n- Warehousing, wholesale, storage and transfer, excluding facilities accessory to adjoining retail and waste transfer stations.\n- Experimental and testing facilities.\n- Offices related to the principal use; building material sales; PUD.\n- Extended hours are by right when the principal use runs multiple shifts (fn F).\n\nP/S (follows the principal use):\n- Outdoor storage as a principal or accessory use (§27.19).\n- Accessory buildings and uses (fn C): repair of the proprietor's vehicles or vehicles stored at least 4 months, inside an enclosed building; one storage building; incidental uses.\n\nSpecial use (S):\n- Health clubs and private indoor recreation (fn B: parking review; the Planning Commission may allow 40 ft height).\n- Showrooms with fabrication or wholesaling (fn E: retail a minor part of the use, no more than 30% of floor area).\n- Private clubs, lodges and places of worship.\n\nSpecial use only within the Lapeer Road Overlay (S*, fn D):\n- Veterinary clinics and animal boarding.\n- Automotive retail and service.\n- Automotive repair, paint and body.\n- Equipment repair and sales.\n- Restaurants including drive-through, with outdoor café or patio conditions.\n- Mini-storage and warehousing.\n- Hotels and motels.\n- Banks and credit unions.\n\nNot permitted:\n- Retail facilities, except building material sales, parcel delivery, and licensed marihuana facilities with a retail component under Ord. 154.\n- Stand-alone food or beverage facilities, except as special land uses in the Lapeer Overlay.\n\nSimilar uses may be allowed under §27.02(E).",
      "citation": "Orion Twp. Zoning Ord. 78, §18.01 Use Matrix and §18.02 Footnotes A-F, pp. 18-1 to 18-3",
      "numeric_facts": [
        {
          "field": "showroom_retail_floor_area_max",
          "value": 30,
          "unit": "percent",
          "condition": "of total floor area, fn E"
        },
        {
          "field": "indoor_recreation_max_height_allowable",
          "value": 40,
          "unit": "ft",
          "condition": "Planning Commission discretion, fn B"
        },
        {
          "field": "long_term_storage_repair_min",
          "value": 4,
          "unit": "months",
          "condition": "accessory repair of stored vehicles, fn C(2)"
        }
      ],
      "evidence": "§18.01, pp.18-1 and 18-2: \"Printing plants P F ... Restaurants, including drive-through restaurants S* D\". Uses Not Permitted: \"Facilities where activities of a retail nature, except for building material sales, parcel delivery services, and licensed marihuana facilities ... are conducted.\"",
      "limitations": "Section 27.19 and Ord. No. 154 are not provided. Lapeer Road Overlay boundaries are not given."
    },
    {
      "id": "b0bb98aa8263c566e4c72c02f64e86a6533df96866f341a6c55ab49277f54a7e",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "LI use matrix.\n\nPermitted by right (P):\n- Manufacture, assembly, repair, processing and packaging of:\n  - electrical appliances and electronics;\n  - fabricated metal products and electronic or neon signs;\n  - material science products (plastics, polymers, laser technology, robotics);\n  - professional, scientific and precision instruments;\n  - semi-finished products (bakery goods, food, cloth, glass, plastics).\n- Building material sales; mini-storage and warehousing; printing plants; tool, die, gauge and machine shops; warehousing, wholesale, storage and transfer.\n- Offices related to the principal use; outdoor patio (fn E); printing, copying and shipping stores; PUD.\n- Pet crematorium (fn I): domestic pets only; no more than 3,000 sq ft GLA; no visible emissions or odors beyond lot lines; remains stored no more than 5 days; viewing rooms allowed but no funeral services.\n- Extended hours are by right for multi-shift principal uses (fn K).\n\nP, S or P/S:\n- Contractor storage yards (P, S); RV storage buildings and yards (P/S); fn A, §27.19.\n- Outdoor storage as a principal or accessory use (P, S).\n- Accessory buildings and uses (P/S following the principal use; fn G).\n\nSpecial use (S):\n- Health clubs and private indoor recreation (fn B: the Planning Commission may allow 40 ft height).\n- Restaurant with no drive-thru or carry-out (fn C):\n  - must abut a major thoroughfare with at least 120 ft right-of-way;\n  - 1 parking space per 100 sq ft GFA;\n  - parking at least 10 ft from the property line, located to the side or rear;\n  - not within 1,000 yards of another restaurant.\n- Outdoor café (fn D).\n- Showrooms with fabrication or wholesaling (fn J: retail no more than 30% of floor area).\n- Public utility buildings and transformer/regulator stations (fn F).\n- Private clubs, lodges and places of worship.\n\nSpecial use only within the Lapeer Road Overlay (S*, fn H):\n- Veterinary clinics and animal boarding.\n- Automotive retail and service.\n- Auto dealerships, repair and used car facilities (fn L: inventory parking).\n- Auto repair, paint and body.\n- Equipment repair and sales.\n- Restaurants with drive-thru.\n- Hotels and motels.\n- Banks.\n\nSimilar uses may be allowed under §27.02(E).",
      "citation": "Orion Twp. Zoning Ord. 78, §16.01 Use Matrix and §16.02 Footnotes A-L, pp. 16-1 to 16-5",
      "numeric_facts": [
        {
          "field": "pet_crematorium_max_gla",
          "value": 3000,
          "unit": "sq ft",
          "condition": "fn I"
        },
        {
          "field": "restaurant_min_row_abutting_thoroughfare",
          "value": 120,
          "unit": "ft",
          "condition": "fn C, restaurant without drive-thru"
        },
        {
          "field": "restaurant_separation",
          "value": 1000,
          "unit": "yards",
          "condition": "from another restaurant, fn C(4)"
        },
        {
          "field": "restaurant_parking_ratio",
          "value": 100,
          "unit": "sq ft GFA per space",
          "condition": "fn C(3)(a)"
        },
        {
          "field": "showroom_retail_floor_area_max",
          "value": 30,
          "unit": "percent",
          "condition": "fn J"
        }
      ],
      "evidence": "§16.01, pp.16-1 and 16-2: \"Mini-storage and warehousing P ... Restaurant (no drive-thru or carry-out) S C ... Pet Crematorium P I\". §16.02(H), p.16-4 lists the Lapeer Road Overlay special land uses.",
      "limitations": "Section 27.19 is not provided. Lapeer Road Overlay boundaries are not given. The LI article has no explicit \"uses not permitted\" list in the excerpt."
    },
    {
      "id": "056458ab5c2763c5635288819efacacafc18af9a997ebd4282cc1203fdf567b6",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "SP-1 lot size standards:\n- The minimum development area is 10 acres, and the district as a whole has a 10-acre minimum lot area.\n- For each separate structure, the minimum lot area is 5,000 sq ft.\n- Lot coverage may not exceed 30%.\n- Maximum structure area is 200,000 sq ft collectively and 10,000 sq ft per structure.\n- The Schedule of Regulations matches: 10 acres for the whole development and 5,000 sq ft for each structure.",
      "citation": "Orion Twp. Zoning Ord. 78, §21.03(B), §21.04, §21.05 (pp. 21-3, 21-5, 21-6); Art. XXVI (p.26-4)",
      "numeric_facts": [
        {
          "field": "min_development_area",
          "value": 10,
          "unit": "acres",
          "condition": "SP-1 district/development as a whole"
        },
        {
          "field": "min_lot_area_each_structure",
          "value": 5000,
          "unit": "sq ft",
          "condition": "each separate structure"
        },
        {
          "field": "max_lot_coverage",
          "value": 30,
          "unit": "percent",
          "condition": "buildings and structures"
        },
        {
          "field": "max_structure_area_collective",
          "value": 200000,
          "unit": "sq ft",
          "condition": "whole development"
        },
        {
          "field": "max_structure_area_each",
          "value": 10000,
          "unit": "sq ft",
          "condition": "each separate structure"
        }
      ],
      "evidence": "§21.03(B)(1), p.21-3: \"The minimum development area shall be ten (10) acres.\" §21.04: \"Minimum Lot Area 10 acres.\" §21.05: \"Minimum Lot Area 5,000 sq. ft.\"",
      "limitations": "Lot width is not specified in the excerpts. Use-specific variations are referenced to the §21.01 matrix, which shows none for lot area."
    },
    {
      "id": "6a88c51149d53e3271710130641bd84e661af5106589f6af15ee280e1a4145fb",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "R-1A maximum height is two stories or 35 feet. The same limit applies to residential and non-residential uses. Building height is measured from grade plane to the average height of the highest roof surface.",
      "citation": "Pembroke Pines LDC §155.421(C), Table 155.421.1 (p. 100); §155.203 'Height of a Building' (p. 30)",
      "numeric_facts": [
        {
          "field": "max_height",
          "value": 35,
          "unit": "feet",
          "condition": "residential use; alternatively two stories"
        },
        {
          "field": "max_stories",
          "value": 2,
          "unit": "stories",
          "condition": "residential use"
        },
        {
          "field": "max_height",
          "value": 35,
          "unit": "feet",
          "condition": "non-residential use; alternatively two stories"
        },
        {
          "field": "max_stories",
          "value": 2,
          "unit": "stories",
          "condition": "non-residential use"
        }
      ],
      "evidence": "Table 155.421.1 Residential Single-Family (R-1A), p.100: 'Maximum Height | Two Stories or 35 feet | Two Stories or 35 feet'. §155.203, p.30: 'Height of a Building: The vertical distance from grade plane to the average height of the highest roof surface.'",
      "limitations": "The table says 'Two Stories or 35 feet' without stating which governs if they conflict. §155.636 (Height Limitation Encroachment Specifications) and accessory-structure height rules (Table 155.620) were not fully provided, so permitted projections above the limit could not be verified. The excerpt is incomplete."
    },
    {
      "id": "12960373ed3cb3ac9fe43e8a43e4f4d8ebe4926c828aaf2a2a5f5e344bc8ea54",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "R-1Z maximum lot coverage is 45%. Coverage means the percentage of lot area covered by buildings or roofed portions of structures. Accessory buildings and structures with solid roofs count toward the district lot-coverage limit.",
      "citation": "Pembroke Pines LDC §155.422(C), Table 155.422 (p. 102); §155.203 'Coverage' (p. 25); §155.620(C)(2) (p. 218)",
      "numeric_facts": [
        {
          "field": "max_lot_coverage",
          "value": 45,
          "unit": "percent",
          "condition": "R-1Z residential; buildings and roofed portions of structures, including solid-roofed accessory structures"
        }
      ],
      "evidence": "Table 155.422, p.102: 'Maximum Lot Coverage 45%'. §155.203: 'Coverage: The percentage of lot area covered or occupied by buildings or roofed portions of structures.' §155.620(C)(2): 'Accessory buildings and structures constructed, with solid roofs ... shall be subject to the lot coverage standards of the zoning district.'",
      "limitations": "The table text extraction is garbled ('45% Coverage' is split across lines), but the value is unambiguous. §155.652 adds R-1Z criteria; the excerpted portion shows no coverage modification. Separately, Table 155.620 caps zero-lot-line driveways at 40% of front lot coverage / 40% of width, and §155.653 requires 35% open space for residential developments; these are not the district lot-coverage cap. The excerpt is incomplete."
    },
    {
      "id": "b5817e083048cdd9dbf4aca691baad27cc288d66d4dd86cd17e014b58b902ce0",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "R-2 minimum setbacks: Residential uses: front 25 ft; side 7.5 ft; rear 15 ft; street side 15 ft. If a two-family dwelling is built on two platted lots, no setback is needed along the common wall and lot line. Non-residential uses: front 30 ft; side 20 ft; rear 25 ft; street side 15 ft. The non-residential side setback increases 1 ft for every 2 ft of building height above 20 ft.",
      "citation": "Pembroke Pines LDC §155.424(C), Table 155.424 and notes [2]-[3] (p. 105)",
      "numeric_facts": [
        {
          "field": "front_setback",
          "value": 25,
          "unit": "feet",
          "condition": "residential"
        },
        {
          "field": "side_setback",
          "value": 7.5,
          "unit": "feet",
          "condition": "residential; 0 along common wall/lot line when two-family dwelling erected on two platted lots"
        },
        {
          "field": "rear_setback",
          "value": 15,
          "unit": "feet",
          "condition": "residential"
        },
        {
          "field": "street_side_setback",
          "value": 15,
          "unit": "feet",
          "condition": "residential"
        },
        {
          "field": "front_setback",
          "value": 30,
          "unit": "feet",
          "condition": "non-residential"
        },
        {
          "field": "side_setback",
          "value": 20,
          "unit": "feet",
          "condition": "non-residential; +1 ft per 2 ft of height exceeding 20 ft"
        },
        {
          "field": "rear_setback",
          "value": 25,
          "unit": "feet",
          "condition": "non-residential"
        },
        {
          "field": "street_side_setback",
          "value": 15,
          "unit": "feet",
          "condition": "non-residential"
        }
      ],
      "evidence": "Table 155.424, p.105: 'Front Setback 25 feet | 30 feet; Side Setback 7.5 feet [2] | 20 feet [3]; Rear Setback 15 feet | 25 feet; Street Side Setback 15 feet | 15 feet'. Note [2]: 'if two-family dwelling is erected on two platted lots, no setback is needed along common wall and lot line.' Note [3]: 'Side setback shall increase by one foot for every two feet in height of structure or building exceeding 20 feet.'",
      "limitations": "Setback encroachment rules (§155.634) and bufferyard rules (§155.630-155.633) were not provided, so permitted projections and any added buffers could not be verified. Accessory structures have separate setbacks in Table 155.620. Unlike R-1A, the R-2 table shows no narrow-lot side-setback reduction in this excerpt. The excerpt is incomplete."
    },
    {
      "id": "fd73b931a803e2baed6a0bb51bc12c0a198c6e6710c3b482037ad142eb364e6b",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "The excerpts do not establish the general zoning variance process. They confirm only that the Board of Adjustment (BOA) has authority over variances. The BOA powers, criteria, vote and notice rules are in §1.02.C (TOC pp. 4–7), which was not provided. Related relief provisions are excerpted, but none is the general zoning variance procedure: (1) BOA appeals of administrative decisions under §2.03.L: notice of appeal within 15 calendar days, a stay of proceedings, and a BOA decision within 30 calendar days. (2) BOA has no jurisdiction over decisions on the land use designated by an SUP (§2.06.C.6). (3) The Planning and Zoning Commission (P&Z) may grant variances to certain landscaping requirements of §2.08.F at Preliminary Site Plan or Site Plan approval, only if conformance is impossible and no alternative exists; its decision is final. (4) Town Council may grant park-fee variances after a public hearing on a finding of substantial hardship not common to similarly situated owners. (5) Subdivision waivers under §3.05.A require undue hardship and specific findings; financial hardship alone does not qualify; the waiver must be the minimum variation. (6) Staff may approve Alternative Compliance (§2.03.K) only for pre-authorized deviations.",
      "citation": "UDC (adopted May 1, 2026) §2.03.L.1 (pp. 34–35); §2.06.C.6 (p. 56); §2.08.F (pp. 98–99); §3.05.A (pp. 208–210); TOC §1.02.C Board of Adjustment pp. 4–7",
      "numeric_facts": [
        {
          "field": "zoning_appeal_filing_deadline",
          "value": 15,
          "unit": "calendar days",
          "condition": "notice of appeal of an administrative official's decision to the BOA (§2.03.L.1.c.i)"
        },
        {
          "field": "boa_appeal_decision_deadline",
          "value": 30,
          "unit": "calendar days",
          "condition": "after notice of appeal received (§2.03.L.1.c.iii)"
        }
      ],
      "evidence": "§2.03.L.1.a p.34: \"In addition to the authorization of variances and special exceptions from the terms of this article, the Board of Adjustment shall have the authority to hear and decide an appeal...\"; §2.06.C.6 p.56: \"The Board of Adjustment shall not have jurisdiction to hear, review, reverse, or modify any decision... with respect to the specific land use designated by any SUP.\"; §2.08.F.d p.98: \"The Planning and Zoning Commission may grant variances to the requirements of this section... The decision by the Planning and Zoning Commission shall be final.\"",
      "limitations": "§1.02.C (BOA composition, powers, variance criteria, vote requirement and notice) is omitted from the excerpts. The general variance standards, application and hearing procedure cannot be extracted. The §1.02.D Construction Board of Appeals text shown governs building-code appeals, not zoning variances."
    },
    {
      "id": "a83a8a527843d7d5a7c85e2d87cd5138fa51bbf5c40cc76e2d7fb0b5323ca009",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "SF-15 requires a minimum lot area of 15,000 sq ft, a minimum lot width of 100 ft and a minimum lot depth of 150 ft. Qualifications: (1) Legally nonconforming recorded, platted lots are deemed conforming and may be developed (§2.02.A.4). (2) The Director of Development Services may waive the minimum lot size administratively for an existing tract created before UDC adoption (§3.04.G.9; Fig. 3.05-1). (3) Width of irregular-shaped lots is determined case by case by the Director (note to Fig. 2.04-5).",
      "citation": "UDC (adopted May 1, 2026) §2.04.D.3.b (p. 45); §2.02.A.4 (p. 16); §3.04.G.9 (p. 181); Fig. 2.04-5 note (p. 39)",
      "numeric_facts": [
        {
          "field": "min_lot_area",
          "value": 15000,
          "unit": "sq ft",
          "condition": "SF-15 district"
        },
        {
          "field": "min_lot_width",
          "value": 100,
          "unit": "ft",
          "condition": "SF-15 district"
        },
        {
          "field": "min_lot_depth",
          "value": 150,
          "unit": "ft",
          "condition": "SF-15 district"
        }
      ],
      "evidence": "§2.04.D.3.b p.45 SF-15 table: \"Minimum Lot Area 15,000 square feet; Minimum Lot Width 100 feet; Minimum Lot Depth 150 feet\"; §2.04.D.3.a: \"minimum lot size of 15,000 square feet\".",
      "limitations": "§2.14.A Lot Regulations (p. 124) was not provided and may contain further lot qualifications. PD ordinances may vary these standards."
    },
    {
      "id": "1854b2ed72b3b0c654adccae4fe572417ee58a1682b0f5b3eecc3f808f913fb1",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "SUP is listed as a special district, but it has no standalone use list. A use may be authorized by SUP only where the Schedule of Uses (§2.07.C) marks it 'S' for the base district; any approval is shown as an 'S'-prefixed designation over that base district. Unlisted or blank uses are prohibited. Approval process: Town Council may approve, conditionally approve or deny, considering P&Z findings on four criteria: harmony and compatibility, activities normally associated with the use, reasonableness, and mitigation of impacts. An SUP site plan must show relationships to all properties within 200 ft. A building permit is required within 12 months, with one possible 6-month extension. Later changes need a new SUP if they increase height, increase floor area by more than 10%, reduce separation from adjacent residential, or reduce open space. Council may amend or rescind an SUP after a hearing for violations, fraud, or taxes delinquent more than 6 months. 'S' uses visible in the partial excerpt include Retirement Housing, Helistop, Mobile Food Vendor, Outdoor Merchandise Display (Incidental), Outside Storage (Incidental), Airport/Heliport, Assisted Care or Living Facility (some districts), Athletic Stadium/Field (Public) and Cemetery or Mausoleum. Separately, §2.14.O.4 requires an SUP for an accessory building that is larger than the primary dwelling, exceeds 7% of lot area, or exceeds 4,000 sq ft.",
      "citation": "UDC (adopted May 1, 2026) Fig. 2.04-1 (p. 36); §2.06.A–C (pp. 55–56); §2.07.A.2–3 (p. 57); §2.07.C Schedule of Uses (pp. 58–59, partial); §2.14.O.4 (p. 129)",
      "numeric_facts": [
        {
          "field": "sup_site_plan_context_radius",
          "value": 200,
          "unit": "ft",
          "condition": "site plan must show relationship to properties in all directions"
        },
        {
          "field": "building_permit_deadline",
          "value": 12,
          "unit": "months",
          "condition": "after SUP approval, if required"
        },
        {
          "field": "extension",
          "value": 6,
          "unit": "months",
          "condition": "Council upon P&Z recommendation"
        },
        {
          "field": "max_floor_area_increase_without_new_sup",
          "value": 10,
          "unit": "percent",
          "condition": "over size at original SUP grant"
        },
        {
          "field": "accessory_building_sup_trigger_lot_share",
          "value": 7,
          "unit": "percent of lot area",
          "condition": "§2.14.O.4.b"
        },
        {
          "field": "accessory_building_sup_trigger_size",
          "value": 4000,
          "unit": "sq ft",
          "condition": "§2.14.O.4.c"
        }
      ],
      "evidence": "§2.07.A.2 p.57 legend: \"S Designates use is permitted upon approval of a Specific Use Permit\"; §2.07.A.3: \"If a use is not listed (or is blank)... it is not allowed\"; §2.06.A p.55: \"approve, conditionally approve, or deny identified specific uses that may be permitted in specified zoning districts\"; §2.06.C.7 p.56: zoning map amended \"prefixed by an 'S' designation.\"",
      "limitations": "The Schedule of Uses is truncated after the first rows of the Educational/Institutional category, so the complete list of SUP-eligible uses by district cannot be extracted. Extracted table column alignment is unreliable, so district assignments for the S uses listed above are not asserted. PD ordinances may alter permitted uses."
    },
    {
      "id": "529723227caf32169afd947a5bdb2394f4e821a1b17304ac3cbaa37964e1666f",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Agricultural (AG) District: maximum building height is 36 feet. Residential accessory structures (e.g., accessory buildings) have separate height limits in Subsection 07.04.",
      "citation": "UDC Art. 05, Subsection 07.01, Residential District Development Standards (p. 5-79); Subsection 02.01(C) (p. 5-6)",
      "numeric_facts": [
        {
          "field": "max_building_height",
          "value": 36,
          "unit": "feet",
          "condition": "AG District principal buildings"
        }
      ],
      "evidence": "Sec. 02.01(C), p. 5-6: AG development 'shall conform to Subsection 03.01 ... and the related standards listed within Subsection 07.01.' Table 07.01, p. 5-79: 'BUILDING HEIGHT (FEET) 36 36 36 36 36 36 36 32 30 32 36'. The last value falls in the AG column.",
      "limitations": "The table text extraction is misaligned. The column mapping (SFE-1.5 through 2F, then AG) was inferred from the column order and the abbreviation row. Height rules for accessory structures, antennas, flag poles, overlays, and PDs are not included. The BOA may modify height for odd-shaped parcels (Sec. 04.03(B), Art. 02)."
    },
    {
      "id": "3b5ce53edeecef02a99558de28b814a253b0c5914d3af018df7f6f2923067aca",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "Downtown (DT) height is set in stories, not feet, under Table 1:\n- Blocks facing the Square: maximum 4 stories, minimum 2 stories.\n- Blocks facing single-family zoning: maximum 2 stories, minimum 2 stories.\n- All other blocks: maximum 4 stories, minimum 2 stories.\n\nQualifications:\n- Note (1): maximum of 2 stories when the building is within 200 ft of single-family zoned property.\n- Note (3): increased height for feature buildings may be approved by minor waiver at site plan; additional height for other buildings is a major waiver.\n- Buildings over 3 stories must step back at least 8 ft at the 4th floor along street frontages. Changing this requires a major waiver.",
      "citation": "UDC Art. 05, Subsection 04.07, Downtown (DT) District, Table 1 and notes (p. 5-15); Subsection 04.07(D)(2)(b)(1) (p. 5-16); waiver lists (p. 5-14)",
      "numeric_facts": [
        {
          "field": "max_stories",
          "value": 4,
          "unit": "stories",
          "condition": "blocks facing the Square"
        },
        {
          "field": "max_stories",
          "value": 2,
          "unit": "stories",
          "condition": "blocks facing single-family zoning; also any building within 200 ft of single-family zoned property"
        },
        {
          "field": "max_stories",
          "value": 4,
          "unit": "stories",
          "condition": "all other blocks"
        },
        {
          "field": "min_stories",
          "value": 2,
          "unit": "stories",
          "condition": "all block types"
        },
        {
          "field": "single_family_proximity_threshold",
          "value": 200,
          "unit": "feet",
          "condition": "triggers 2-story maximum"
        },
        {
          "field": "fourth_floor_stepback",
          "value": 8,
          "unit": "feet",
          "condition": "buildings greater than 3 stories, along street frontages"
        }
      ],
      "evidence": "Table 1, p. 5-15: 'BUILDING HEIGHT (1) & (3) ... MAXIMUM # OF STORIES ... 4 / 2 (1) / 4; MINIMUM # OF STORIES 2 2 2'. Note (1): 'MAXIMUM OF TWO (2) STORIES WHEN THE BUILDING IS WITHIN 200-FEET OF SINGLE-FAMILY ZONED PROPERTY.' Note (3): 'INCREASED HEIGHT FOR FEATURE BUILDINGS MAY BE APPROVED ... BY MINOR WAIVER. ADDITIONAL HEIGHT FOR OTHER BUILDINGS SHALL BE CONSIDERED A MAJOR WAIVER.' Sec. 04.07(D)(2)(b)(1): 'greater than three (3) stories ... set back at the fourth floor at least eight feet'.",
      "limitations": "The Table 1 layout is garbled. The column assignment of 4 / 2 / 4 maximum stories was inferred. No height in feet is stated in the excerpt. Table 07.03 refers DT to 'Section 04.08', which appears to be a cross-reference error. Regulating-plan details and parts of 04.07 are omitted from the excerpts."
    },
    {
      "id": "55c33c5f2c0e416ffe297093701be3aac98c6007a0aad7a745ccb2656b8ad6ca",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Neighborhood Services (NS) District minimum lot requirements:\n- Minimum lot area: 6,000 SF.\n- Minimum lot width: 60 ft.\n- Minimum lot depth: 100 ft.\n\nRelated limit: maximum building size is 5,000 SF unless a larger size is approved by SUP (Planning and Zoning Commission and City Council).",
      "citation": "UDC Art. 05, Subsection 07.03, Non-Residential District Development Standards, NS column and footnote 1 (p. 5-81)",
      "numeric_facts": [
        {
          "field": "min_lot_area",
          "value": 6000,
          "unit": "square feet",
          "condition": "NS District"
        },
        {
          "field": "min_lot_width",
          "value": 60,
          "unit": "feet",
          "condition": "NS District"
        },
        {
          "field": "min_lot_depth",
          "value": 100,
          "unit": "feet",
          "condition": "NS District"
        },
        {
          "field": "max_building_size",
          "value": 5000,
          "unit": "square feet",
          "condition": "unless otherwise approved through SUP"
        }
      ],
      "evidence": "Table 07.03, p. 5-81, NS column sequence: 'NS ... 5,000 1 ... 6,000 ... 60 ... 100 ... 15 5'. Rows are labeled MAXIMUM BUILDING SIZE (SF), MINIMUM LOT AREA (SF), WIDTH (FEET), DEPTH (FEET). Footnote 1: 'A MAXIMUM BUILDING SIZE OF 5,000 SF IN AREA, UNLESS OTHERWISE APPROVED THROUGH A SUP'.",
      "limitations": "The table extraction is badly misaligned for some columns (GR, C, HC, LI, HI). The NS values were read from a consistent column sequence but cannot be visually verified. The RO maximum lot area in footnote 3 does not apply to NS. Overlay or PD standards may differ."
    },
    {
      "id": "be40e3fac126b46d87ab9a00a6ea5d19ed982aa3bf4c8aacc35ffeff0e7c3053",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Single-Family 10 (SF-10) District: maximum building height is 36 feet. Accessory buildings and structures are limited separately, generally to 15 ft, under Subsection 07.04.",
      "citation": "UDC Art. 05, Subsection 07.01, Residential District Development Standards (p. 5-79); Subsection 03.07(C) (p. 5-8); Subsection 07.04 (p. 5-82)",
      "numeric_facts": [
        {
          "field": "max_building_height",
          "value": 36,
          "unit": "feet",
          "condition": "SF-10 principal structures"
        },
        {
          "field": "max_accessory_building_height",
          "value": 15,
          "unit": "feet",
          "condition": "accessory buildings in 'All other single-family zoning districts (SF-7, SF-8.4, SF-10, SF-16 & SF-1)'; two-story accessory buildings prohibited"
        }
      ],
      "evidence": "Sec. 03.07(C): SF-10 shall conform to 'Subsection 07.01'. Table 07.01, p. 5-79: 'BUILDING HEIGHT (FEET) 36 36 36 36 36 36 36 32 30 32 36'. SF-10 is the 6th column. Table 07.04: 'BUILDING HEIGHT (FEET) 8 15 15 15 15 ...'; fn 8: 'TWO (2) STORY ACCESSORY BUILDINGS OR STRUCTURES SHALL BE PROHIBITED.'",
      "limitations": "The column mapping was inferred from garbled table text. Accessory-structure heights vary by type (portable 10 ft, pergolas 12 ft, etc.). Overlay or PD rules are not addressed."
    },
    {
      "id": "b84038dfdc490a45ade28777efc6024a2f0f330d55cea3e9d86ef4d09d2b7a9d",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Single-Family Estate 1.5 (SFE-1.5) District minimum setbacks:\n- Front: 50 ft.\n- Rear: 10 ft.\n- Side: 25 ft.\n- Between buildings: 10 ft.\n\nQualifications:\n- A side setback adjacent to a street is treated the same as a front yard setback (fn 3).\n- Ordinary projections such as sills, cornices, chimneys, and eaves may extend no more than 30 in into a required yard.\n- Accessory buildings: rear 10 ft; rear with alleyway 20 ft if garage doors face the alley, otherwise the base district setback applies (fn 4); side setback per the zoning district; 10 ft between buildings. They must be located behind the front facade.",
      "citation": "UDC Art. 05, Subsection 07.01 and footnote 3 (p. 5-79); Subsection 07.04 (p. 5-82); Subsection 01.07(A) (p. 5-5)",
      "numeric_facts": [
        {
          "field": "min_front_setback",
          "value": 50,
          "unit": "feet",
          "condition": "SFE-1.5; also applies to side yard adjacent to a street"
        },
        {
          "field": "min_rear_setback",
          "value": 10,
          "unit": "feet",
          "condition": "SFE-1.5 principal structure"
        },
        {
          "field": "min_side_setback",
          "value": 25,
          "unit": "feet",
          "condition": "SFE-1.5 interior side"
        },
        {
          "field": "min_between_buildings",
          "value": 10,
          "unit": "feet",
          "condition": "SFE-1.5"
        },
        {
          "field": "max_projection_into_required_yard",
          "value": 30,
          "unit": "inches",
          "condition": "ordinary projections"
        },
        {
          "field": "accessory_building_rear_setback",
          "value": 10,
          "unit": "feet",
          "condition": "SFE-1.5 accessory building"
        },
        {
          "field": "accessory_building_rear_setback_alley",
          "value": 20,
          "unit": "feet",
          "condition": "accessory building with garage doors facing alley"
        },
        {
          "field": "accessory_building_separation",
          "value": 10,
          "unit": "feet",
          "condition": "SFE-1.5 accessory building"
        }
      ],
      "evidence": "Table 07.01, p. 5-79, MINIMUM SETBACKS rows (front, rear, side, between buildings), first column: '50', '10', '25', '10'. Fn 3: 'THE SIDE SETBACK ADJACENT TO A STREET IS TREATED THE SAME AS A FRONT YARD BUILDING SETBACK.' Sec. 01.07(A): projections may not extend 'into a required yard by more than 30-inches'. Table 07.04 SFE-1.5: 'REAR 10; REAR W/ ALLEYWAY 20 4; SIDE SEE ZONING DISTRICT; BETWEEN BUILDINGS 10'.",
      "limitations": "The row-to-value mapping was inferred from garbled table text. Overlay district setbacks (e.g., Sec. 06.02(D)(1)) apply only to non-residential and multi-family uses unless otherwise stated. Future right-of-way measurement (Sec. 01.07(B)) and PD modifications are not quantified."
    },
    {
      "id": "1952f450390118cbc15864d15ff4d1d6119bd370af5519d0f56a634024cdf3a6",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Single-Family Estate 4.0 (SFE-4.0) District: maximum lot coverage is 35%. Pergolas count against residential lot coverage.",
      "citation": "UDC Art. 05, Subsection 07.01, Residential District Development Standards (p. 5-79); Subsection 03.04(C) (p. 5-7); Subsection 07.04 fn 11 (p. 5-82)",
      "numeric_facts": [
        {
          "field": "max_lot_coverage",
          "value": 35,
          "unit": "percent",
          "condition": "SFE-4.0 District"
        }
      ],
      "evidence": "Sec. 03.04(C): SFE-4.0 shall conform to 'Subsection 07.01'. Table 07.01: 'MAXIMUM LOT COVERAGE (%) ... 35 35 35 45 45 45 45 45 50 45 N/A'. SFE-4.0 is the 3rd column. Table 07.04 fn 11: 'PERGOLAS ... DO COUNT AGAINST THE RESIDENTIAL LOT COVERAGE REQUIREMENTS'.",
      "limitations": "The table layout is garbled and the column mapping was inferred. A definition of lot coverage was not provided in the excerpts."
    },
    {
      "id": "e440b6d8a7ff46a8dabd34a54d6fb9e35b70f3e541aca53912d7c913645edb33",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "The Southside Residential Neighborhood Overlay (SRO) District does not set its own list of permitted uses. Permitted uses are those of the underlying base zoning district under the Article 04 Land Use Schedule:\n- In the schedule legend, a blank cell means 'for Overlay Districts Refer to Base Zoning District'. SRO has no column in the schedule.\n- Where an overlay does not address a standard, the underlying zoning district governs.\n- The City Council may approve special requests in furtherance of neighborhood preservation, such as signage plans, alternate building materials, or reduced setbacks. Such approvals preempt underlying zoning restrictions, but special requests may not include any request to change the land use of a property.\n- Sexually Oriented Businesses are not permitted within any overlay district.",
      "citation": "UDC Art. 05, Subsection 06.05(A)-(B) (p. 5-37); Section 06 general overlay text (p. 5-26); Art. 04, Subsection 01.01 legend and Land Use Schedule; Art. 04, Subsection 02.03(E)(7)",
      "numeric_facts": [],
      "evidence": "Sec. 06.05(B), p. 5-37: 'Special requests shall not include any request to change the land use of a property.' P. 5-26: 'In cases where the overlay district does not specifically address a standard or requirement, the underlying zoning district will govern.' Art. 04 legend: 'Land Use NOT Permitted OR for Overlay Districts Refer to Base Zoning District'. The schedule's overlay columns list only SOV, SH-66, and IH-30. Sec. 02.03(E)(7)(a): 'Sexually Oriented Businesses shall not be permitted within any Overlay District'.",
      "limitations": "The excerpts are noncontiguous. Ord. 26-06 (March 2, 2026) amended SRO to remove reduced density and development standards; the shown 06.05 text appears to reflect that change. Actual permitted uses depend on each parcel's base district, which is not identified. Any PD or SUP on a parcel is not covered."
    },
    {
      "id": "141fdc884ca91ba7a1699651511c4017e042974434fce346629ab4db8690429b",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Special land uses in One-Family Residential (1F) per §770-34C:\n(1) Group family day-care homes and day-care centers when incorporated with an existing church or school (§770-59).\n(2) Police and fire stations, public safety buildings, public utility buildings, telephone exchange buildings, electric transformer stations and gas regulator stations, not including service or storage yards.\n(3) Churches and other institutions for religious worship (§770-74: 25 ft front/side, 35 ft rear; access to an urban collector).\n(4) Bed-and-breakfast operations (§770-78).\n(5) Residential accessory parking lots (§770-73; final decision by City Commission).\n(6) Senior accessory housing (§770-71).\n(7) Golf courses and country clubs.\n(8) Cemeteries (§770-50).\n(9) Community centers (§770-51).\n(10) Uses/parcels in the Single-Family Residential Overlay District (§770-58).\n(11) Reuse of school facilities when the existing principal buildings are maintained (§770-87).\n\nRelated chapter-wide special land use routes that also apply:\n- Community gardens, in any district where there are no existing dwelling units (§770-56D).\n- Wireless communication facilities that cannot reasonably be established as permitted uses (§770-88B(2)).\n- Rebutting the four-person functional-family presumption (§770-8 'Family').\n- Parking land banking (§770-106D(2)).\n\nProcedure: all are discretionary Plan Commission approvals after a public hearing under §770-11 standards (§770-21A(3)).",
      "citation": "Royal Oak Code ch. 770, §770-34C; §770-11; §770-21A(3); §770-56D; §770-88B(2)",
      "numeric_facts": [],
      "evidence": "p.49 §770-34C 'Special land uses. (1) Group family day-care homes and day-care centers, when incorporated with an existing church or school... (11) Reuse of school facilities...'. p.38 §770-21A(3) 'Special land uses are permitted at the discretion of the Plan Commission... only if specifically listed in the various zones.' p.87 §770-56D 'Community gardens shall be permitted as a special land use in any zoning district, provided that there are no existing dwelling units upon the property.'",
      "limitations": "The district code '1F' does not appear in the text; it is mapped to 'One-Family Residential' (§770-19/§770-34). The overlay map and the school/hotel site lists are referenced but not provided."
    },
    {
      "id": "52702279ec8e0b27b40219e3fbc5561cb039013b375ee68c6afe56b8b1a20a66",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Principal building setbacks in 1F (§770-34D):\n\nFront yard\n- Interior lot: the greater of 25 ft or the average setback of adjacent dwellings, but not more than 50 ft from the front property line.\n- Corner lot, side-street front yard where the adjacent lot does not front that street: at least 10 ft. Lots with frontage under 50 ft may reduce this to 8 ft.\n- Corner lot, side-street front yard where the adjacent lot does front that street: interior-lot minimums apply.\n\nSide yard\n- Lots 45 ft or wider at the building line: 5 ft minimum each side; 15 ft total if no attached accessory building is in the side yard.\n- Lots under 45 ft wide: 4 ft minimum; 12 ft total if no attached accessory building is provided.\n- Lots without accessory buildings in the side yard: one side yard must keep an unobstructed open area at least 8 ft wide suitable for a driveway.\n\nRear yard: 35 ft.\n\nGeneral qualifications (§770-21C):\n- Front setbacks are measured from the right-of-way. Corner lots provide front setbacks on both frontages unless otherwise noted.\n- Unenclosed porches and steps may project up to 7 ft into the front setback, one story maximum.\n- Chimneys, eaves, bay windows and similar features may project up to 24 in. Cantilevers containing floor area must meet setbacks.\n- Decks and patios at grade need no setback. Decks 6 in or more above grade need 3 ft from the rear and side lines if entirely in the rear yard.\n\nAccessory buildings (§770-22A):\n- Allowed in side or rear yards only.\n- 3 ft from the rear and side lot lines when entirely in the rear yard; otherwise principal setbacks apply.\n- Garages entered at right angles to an alley: 10 ft from the rear line.\n- Height above 13 ft (up to 15 ft) requires 1 ft of extra setback per foot.\n\nOther setback rules:\n- Vinsetta Boulevard Overlay: front setback is the greater of 50 ft or the adjacent average (§770-55C(3)).\n- Churches: 25 ft front and side, 35 ft rear (§770-74A(1)).",
      "citation": "Royal Oak Code ch. 770, §770-34D(5)-(7); §770-21C; §770-22A; §770-55C(3); §770-74A(1)",
      "numeric_facts": [
        {
          "field": "front_setback_min",
          "value": 25,
          "unit": "ft",
          "condition": "interior lot; or average of adjacent dwellings if greater"
        },
        {
          "field": "front_setback_max",
          "value": 50,
          "unit": "ft",
          "condition": "interior lot"
        },
        {
          "field": "corner_side_street_front_min",
          "value": 10,
          "unit": "ft",
          "condition": "adjacent lot does not front side street"
        },
        {
          "field": "corner_side_street_front_min",
          "value": 8,
          "unit": "ft",
          "condition": "lot frontage less than 50 ft"
        },
        {
          "field": "side_setback_min",
          "value": 5,
          "unit": "ft",
          "condition": "lot width >=45 ft at building line"
        },
        {
          "field": "side_setback_total_min",
          "value": 15,
          "unit": "ft",
          "condition": "lot width >=45 ft; no attached accessory building in side yard"
        },
        {
          "field": "side_setback_min",
          "value": 4,
          "unit": "ft",
          "condition": "lot width <45 ft"
        },
        {
          "field": "side_setback_total_min",
          "value": 12,
          "unit": "ft",
          "condition": "lot width <45 ft; no attached accessory building"
        },
        {
          "field": "driveway_open_area_width_min",
          "value": 8,
          "unit": "ft",
          "condition": "one side yard, lots without side-yard accessory buildings"
        },
        {
          "field": "rear_setback_min",
          "value": 35,
          "unit": "ft",
          "condition": "principal buildings"
        },
        {
          "field": "porch_front_projection_max",
          "value": 7,
          "unit": "ft",
          "condition": "unenclosed porches/steps"
        },
        {
          "field": "architectural_projection_max",
          "value": 24,
          "unit": "in",
          "condition": "chimneys, eaves, bay windows etc."
        },
        {
          "field": "accessory_rear_side_setback_min",
          "value": 3,
          "unit": "ft",
          "condition": "accessory building entirely in rear yard"
        }
      ],
      "evidence": "p.50 §770-34D(5)(a) 'set back the greater of 25 feet or the average setback of adjacent dwellings, but shall not exceed 50 feet'; (6)(a) 'no less than five feet... total... no less than 15 feet'; (6)(b) 'minimum of four feet... no less than 12 feet'; (7) 'no less than 35 feet from the rear property line.' p.39-40 §770-21C exceptions.",
      "limitations": "'1F' is mapped to One-Family Residential by inference. Adjacent-dwelling averaging requires site facts. Overlay boundaries are not provided."
    },
    {
      "id": "abb4b2d976fac2ac4046eded916d11e78dba073ae3952714c1a54ac5f5f117f0",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Lot coverage in 1F (§770-34D(8)):\n- Lots under 6,000 sq ft: coverage of all buildings may not exceed 35% of the site, and total ground floor area of all buildings may not exceed 1,800 sq ft.\n- Lots of 6,000 sq ft or more: coverage of all buildings may not exceed 30%.\n\nHow coverage is counted:\n- Lot coverage is the percentage of lot area covered by building area. Building area means the ground-floor area of all principal and accessory buildings, including covered porches (§770-8).\n- Accessory buildings count toward coverage (§770-22A(6)).\n- Accessory buildings are separately capped at 10% of lot area and 800 sq ft total (§770-22A(5)).\n- Solar collectors do not count toward lot coverage (§770-54D(1)).",
      "citation": "Royal Oak Code ch. 770, §770-34D(8) (amended 5-20-2013, Ord. 2013-08); §770-8; §770-22A(5)-(6); §770-54D(1)",
      "numeric_facts": [
        {
          "field": "max_lot_coverage",
          "value": 35,
          "unit": "percent",
          "condition": "lots less than 6,000 sq ft"
        },
        {
          "field": "max_total_ground_floor_area_all_buildings",
          "value": 1800,
          "unit": "sq ft",
          "condition": "lots less than 6,000 sq ft"
        },
        {
          "field": "max_lot_coverage",
          "value": 30,
          "unit": "percent",
          "condition": "lots 6,000 sq ft or larger"
        },
        {
          "field": "accessory_building_floor_area_max",
          "value": 10,
          "unit": "percent of lot area",
          "condition": "all accessory buildings"
        },
        {
          "field": "accessory_building_floor_area_max",
          "value": 800,
          "unit": "sq ft",
          "condition": "all accessory buildings"
        }
      ],
      "evidence": "p.50 §770-34D(8) 'On lots less than 6,000 square feet, the lot coverage of all buildings shall not exceed 35% of the site, provided that in no instance shall the total ground floor area of all buildings exceed 1,800 square feet. On lots equal to or larger than 6,000 square feet, the lot coverage of all buildings shall not exceed 30% of the site.' p.17 'LOT COVERAGE — The percentage of the lot area covered by the building area.'",
      "limitations": "'1F' is mapped to One-Family Residential by inference. The minimum lot size is 6,000 sq ft, so the under-6,000 rule applies to nonconforming lots (§770-113)."
    },
    {
      "id": "588eee93b72326ef92557432df78cb22e439d2029f63032889bf432972681c56",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "One-Family Large Lot Residential (1FL) has no list of its own. Its special land uses are 'All special land uses allowed in the One-Family Residential Zone' (§770-35C(1)). By reference, these are the §770-34C uses:\n(1) Group family day-care homes and day-care centers when incorporated with an existing church or school (§770-59).\n(2) Police and fire stations, public safety buildings, public utility buildings, telephone exchanges, electric transformer and gas regulator stations, without service or storage yards.\n(3) Churches and other institutions for religious worship (§770-74).\n(4) Bed-and-breakfast operations (§770-78).\n(5) Residential accessory parking lots (§770-73).\n(6) Senior accessory housing (§770-71). In 1FL, a senior accessory dwelling of up to 600 sq ft may exceed the 3,500 sq ft floor-area cap (§770-35D(10)).\n(7) Golf courses and country clubs.\n(8) Cemeteries (§770-50).\n(9) Community centers (§770-51).\n(10) Single-Family Residential Overlay District uses (§770-58).\n(11) Reuse of school facilities (§770-87).\n\nCommunity gardens are also a special land use in any district (§770-56D). All approvals follow the §770-11 Plan Commission procedure.",
      "citation": "Royal Oak Code ch. 770, §770-35C(1) (amended 4-21-2014, Ord. 2014-04; 5-18-2026, Ord. 2026-05); §770-34C; §770-35D(10)",
      "numeric_facts": [
        {
          "field": "senior_accessory_dwelling_floor_area_max",
          "value": 600,
          "unit": "sq ft",
          "condition": "addition to existing single-family dwelling in 1FL"
        }
      ],
      "evidence": "p.51 §770-35C 'Special land uses. (1) All special land uses allowed in the One-Family Residential Zone.' p.49 §770-34C(1)-(11) list.",
      "limitations": "'1FL' is mapped to One-Family Large Lot Residential by inference. The answer depends on the cross-referenced §770-34C list. Applicability of the §770-58 overlay (which by its text addresses the One-Family Residential Zone) to 1FL parcels is unclear."
    },
    {
      "id": "5624f0a49af6e7d1111ff3d4281608c0588bcfa041a55b52a2bb01e7e141ce19",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Principal buildings in Two-Family Residential (2F) may not exceed 30 ft (§770-36D(4)). Single-family detached dwellings follow the One-Family standards, which are also 30 ft.\n\nMeasurement (§770-21D(2)): from the average finished grade at the base of the building front to the midpoint of the roof for pitched roofs, or to the roofline for flat roofs.\n\nExceptions (§770-21D(3)): elevator and stair housings, mechanical equipment, parapets, chimneys, steeples, antennae, wind/solar systems and similar structures may exceed the limit if they are proportional, screened and set back from the building edge by their height. None may exceed the district limit by more than 15 ft.\n\nAccessory buildings: 13 ft, or up to 15 ft with 1 ft of extra setback per extra foot (§770-22A(7)).",
      "citation": "Royal Oak Code ch. 770, §770-36D(4); §770-36B(1); §770-21D(2)-(3); §770-22A(7)",
      "numeric_facts": [
        {
          "field": "max_height_principal",
          "value": 30,
          "unit": "ft",
          "condition": "principal buildings"
        },
        {
          "field": "rooftop_structure_max_above_limit",
          "value": 15,
          "unit": "ft",
          "condition": "§770-21D(3) exceptions"
        },
        {
          "field": "max_height_accessory",
          "value": 13,
          "unit": "ft",
          "condition": "accessory buildings"
        },
        {
          "field": "max_height_accessory",
          "value": 15,
          "unit": "ft",
          "condition": "with 1 ft additional setback per extra foot"
        }
      ],
      "evidence": "p.52 §770-36D(4) 'Height. No principal buildings shall exceed a height of 30 feet.' p.40 §770-21D(3) 'No such structure shall exceed by more than 15 feet above the height limit of the district.'",
      "limitations": "'2F' is mapped to Two-Family Residential by inference. The §770-8 definition of 'building height' (average height between eaves and ridge, measured from average grade at the building wall) differs from the §770-21D(2) measurement method."
    },
    {
      "id": "5ee70a33c94ae600bc081a3a29e7f6406cc734f89339daf3c509b671159a842c",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "Setbacks in General Business (GB) (§770-41D(2)):\n\nBase rule: no setback is required unless the property is adjacent to a residential zone. Any setback that is provided must be at least 5 ft.\n\nWhen adjacent to a residential zone:\n- Front: if on the same side of the street in the same block as residentially zoned property (with or without an alley), the front setback equals the setback required in that residential zone.\n- Side and rear, no intervening alley: 25 ft.\n- Side and rear, public alley adjacent to the lot line: 25 ft measured from the alley centerline.\n\nPlan Commission discretion (§770-41D(2)(b)): during site plan review it may set a greater or lesser setback. It must consider building size and configuration, relationship to existing and proposed buildings, uses and thoroughfares, safety, and impact on adjacent land.\n\nRelated rules:\n- Off-street parking adjacent to residential zones needs a 10 ft screened setback, unless the Plan Commission permits otherwise (§770-105C).\n- Several special uses require a 10 ft landscaped greenbelt along rights-of-way (§§770-63 to 770-67).\n- Automobile wash vacuuming must be at least 50 ft from a residential zone (§770-67G).\n- Filling station buildings follow district setbacks (§770-64F).",
      "citation": "Royal Oak Code ch. 770, §770-41D(2); §770-105C; §§770-63D, 770-64E-F, 770-67G",
      "numeric_facts": [
        {
          "field": "min_setback_if_provided",
          "value": 5,
          "unit": "ft",
          "condition": "not adjacent to residential zone; setback otherwise not required"
        },
        {
          "field": "side_rear_setback",
          "value": 25,
          "unit": "ft",
          "condition": "adjacent to residential zone, no intervening alley"
        },
        {
          "field": "side_rear_setback",
          "value": 25,
          "unit": "ft",
          "condition": "measured from centerline of adjacent public alley"
        },
        {
          "field": "parking_setback_from_residential",
          "value": 10,
          "unit": "ft",
          "condition": "side/rear lines adjacent to residential zone"
        }
      ],
      "evidence": "p.62 §770-41D(2)(a) 'No setback shall be required except where the property is adjacent to a residential zone. If a setback is to be provided, it shall not be less than five feet... [2] Where there is no intervening alley, the side and rear yard setbacks shall be 25 feet...' p.62-63 (b) 'Alternately, the Plan Commission... may establish a greater or lesser setback.'",
      "limitations": "'GB' is mapped to General Business by inference. The residential-adjacent front setback depends on the adjoining residential zone's requirement. Plan Commission discretion can change any value."
    },
    {
      "id": "ab9645a009c0dea1a1aa146921e6ad33133f6b3edcc090f7ae6265621899eb1c",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "No building in General Industrial (GI) may be taller than four stories or 50 ft (§770-44D(1)).\n\nMeasurement (§770-21D(2)): from the average finished grade at the front base to the roof midpoint for pitched roofs, or the roofline for flat roofs.\n\nRooftop exceptions (§770-21D(3)): equipment, parapets, towers, chimneys, smokestacks, tanks and similar structures may exceed the limit by up to 15 ft. They must be proportional, screened and set back from the building edge.\n\nUse-specific limits:\n- Hospitals (a GI special land use): building height may not exceed 140 ft (§770-79A(5)). How this interacts with the 50 ft district cap is not resolved in the text.\n- Billboards: 25 ft above the street level they face (§770-57C).\n- Ground-mounted wind systems: 100 ft on sites not adjacent to residential or mixed-use districts; otherwise twice the principal height limit (§770-54C(2)).\n- Ground-mounted solar: 20 ft (§770-54D(2)).\n- Lighting fixtures: 20 ft, or 15 ft next to residential areas (§770-96B(3)(e)).",
      "citation": "Royal Oak Code ch. 770, §770-44D(1); §770-21D(2)-(3); §770-79A(5); §770-57C; §770-54C(2), D(2)",
      "numeric_facts": [
        {
          "field": "max_height_building",
          "value": 50,
          "unit": "ft",
          "condition": "all buildings"
        },
        {
          "field": "max_stories",
          "value": 4,
          "unit": "stories",
          "condition": "all buildings"
        },
        {
          "field": "rooftop_structure_max_above_limit",
          "value": 15,
          "unit": "ft",
          "condition": "§770-21D(3) exceptions"
        },
        {
          "field": "max_height_hospital",
          "value": 140,
          "unit": "ft",
          "condition": "hospital special land use (§770-79A(5)); interaction with 50-ft cap unresolved"
        },
        {
          "field": "max_height_billboard",
          "value": 25,
          "unit": "ft",
          "condition": "above street level faced"
        },
        {
          "field": "max_height_wind_system",
          "value": 100,
          "unit": "ft",
          "condition": "ground-mounted, site not adjacent to residential/mixed-use"
        }
      ],
      "evidence": "p.71 §770-44D(1) 'Height. No building shall be taller than four stories or 50 feet.' p.110 §770-79A(5) 'Building height shall not exceed 140 feet.'",
      "limitations": "'GI' is mapped to General Industrial by inference. The conflict between the hospital limit and the district limit may resolve to the more restrictive limit (§770-3C, §770-5A) or the particular limit (§770-7A); the text does not settle it."
    },
    {
      "id": "3e5d76326914e3ac158c7a3a0f7f40c138ea61a5ac3333c600b5bf6f7b984343",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "Special Redevelopment (SR) (§770-48) has no fixed numeric setbacks. All special redevelopment projects are governed by §770-87, Special redevelopment projects, under which setbacks are set case by case through special land use and Plan Commission plan approval.\n\n- Residential uses (§770-87D(1)): deviations from applicable setbacks may be granted as part of approval, if the applicant demonstrates design features the Plan Commission deems adequate.\n- Nonresidential uses (§770-87D(2)): adequate separation and buffering from adjoining residential uses is required, at the Plan Commission's discretion (for example berms or walls). The development design standards and regulations of the district where the property is situated must be met, but setback deviations may be granted.\n- The approved special land use, its conditions and the development agreement then become the land use authorization (§770-87G).\n- If the project includes senior housing, adult foster care congregate facilities or convalescent centers: perimeter setbacks of 25 ft from rights-of-way, 50 ft from single-family zoned property, and 25 ft from other lines apply in all districts except the CBD, subject to Plan Commission modification (§770-72B(1)).",
      "citation": "Royal Oak Code ch. 770, §770-48A; §770-87D(1)-(2), E, G; §770-72B(1)",
      "numeric_facts": [
        {
          "field": "senior_housing_perimeter_setback_row",
          "value": 25,
          "unit": "ft",
          "condition": "only if senior housing/AFC congregate/convalescent use; modifiable"
        },
        {
          "field": "senior_housing_perimeter_setback_single_family",
          "value": 50,
          "unit": "ft",
          "condition": "adjacent single-family zoned property; modifiable"
        },
        {
          "field": "senior_housing_perimeter_setback_other",
          "value": 25,
          "unit": "ft",
          "condition": "all other property lines; modifiable"
        }
      ],
      "evidence": "p.75 §770-48A 'All special redevelopment projects are subject to the criteria and standards set forth in § 770-87.' p.118 §770-87D(1) 'deviations from the applicable setbacks... may be granted as part of the overall approval'; D(2) 'all development design standards and regulations of the district in which the property is situated shall be met, provided that deviations from the applicable setbacks... may be granted.'",
      "limitations": "'SR' is mapped to Special Redevelopment by inference. The text does not say which district's base setbacks are 'applicable' to SR-zoned land; this may refer to prior or underlying zoning. Actual setbacks depend on individual approvals and development agreements, which are not in the source."
    },
    {
      "id": "af137d63c9f0d568b324a9f9e173c90fb8d75f46354a96d82b64991992e80265",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "The MF-1 Area Requirements table sets no minimum lot area, lot width, or lot depth. The only lot-intensity control it gives is a maximum density of 18 dwelling units per acre, with a maximum lot coverage of 65%. The ordinance does not state 'None' for MF-1 lot size, which it does for C-1, C-2 and I, so the absence cannot be read as an affirmative no-standard rule.",
      "citation": "Royse City Zoning Ordinance § 4-5.C (MF-1 Zoning District Area Requirements); § 3-3 (Density definition)",
      "numeric_facts": [
        {
          "field": "max_density",
          "value": 18,
          "unit": "dwelling_units_per_acre",
          "condition": "MF-1 district; density is per net acre, excluding streets and alleys (§ 3-3)"
        },
        {
          "field": "max_lot_coverage",
          "value": 65,
          "unit": "percent",
          "condition": "MF-1 district"
        }
      ],
      "evidence": "§ 4-5.C: 'The requirements regulating the minimum lot size ... shall conform with the provisions provided in the Area Requirements table for the MF1 Zoning District.' The table lists only 'Maximum Density 18 d.u. per acre', street/side/rear yards, building separation, 'Maximum Lot Coverage 65%', height and living area, with no Minimum Lot Area, Width or Depth row. § 3-3: 'Density. The number of dwelling units permitted per net acre of land. A net acre of land does not include portions of streets or alleys.'",
      "limitations": "Section C says minimum lot size is governed by the table, but the table has no lot-size row and does not say 'None'. It is unclear whether lot size is unregulated or omitted, so this is unresolved rather than no_standard. Density implies a minimum land area per unit (about 2,420 sq ft per unit at 18 du per net acre), but the ordinance does not state that as a lot-size standard. The subdivision regulations and any PD ordinance are not provided. § 2-4 relieves nonconforming lots of record from area and width minimums."
    },
    {
      "id": "2c888993c9e8b304752124df31afdbe2d256fbebfe18c0d45d0e5b74edfb43a9",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "The maximum building height in the MH district is 20 ft. The table gives no story limit.\n\nHeight is measured from the higher of:\n- the average established grade at the street line, or\n- the average natural front yard ground level.\n\nIt is measured to:\n- the highest point of a flat roof,\n- the deck line of a mansard roof, or\n- the mean height between eaves and ridge for hip and gable roofs.\n\nChimneys, cupolas, domes, spires, parapets up to 10 ft and similar features are excluded.\n\nQualifications:\n- Steeples, domes, cupolas and other architectural elements above the roof that are not intended for occupancy are exempt (§ 6-4.B).\n- Nonresidential buildings may exceed the limit by up to 20 ft with a site plan and 1 ft of extra front, side and rear setback per foot of added height. Greater height requires a special exception (§ 6-4.A).\n- Churches, schools and other public or quasi-public buildings may reach 60 ft or 5 stories if each yard is increased 1 ft per foot of added height (§ 6-4.I).\n- Accessory buildings are limited to 18 ft (§ 6-3.E).\n- Land zoned MH that is not developed as a manufactured home subdivision may be developed under SF-2 rules, which allow 35 ft or 2-1/2 stories (§ 4-4.B, § 4-3.C).",
      "citation": "Royse City Zoning Ordinance § 4-4.D–E (MH Zoning District Area Requirements); § 3-3 (Height); § 6-4.A, B, I; § 6-3.E; § 4-4.B",
      "numeric_facts": [
        {
          "field": "max_building_height",
          "value": 20,
          "unit": "feet",
          "condition": "MH district, manufactured home subdivision development"
        },
        {
          "field": "max_height_nonresidential_bonus",
          "value": 20,
          "unit": "feet",
          "condition": "nonresidential building; additional height over district max with site plan and 1 ft added setback per ft of height (§ 6-4.A)"
        },
        {
          "field": "max_height_public_quasi_public",
          "value": 60,
          "unit": "feet",
          "condition": "churches, schools, public/quasi-public buildings, or 5 stories; yards increased 1 ft per ft above district height (§ 6-4.I)"
        },
        {
          "field": "max_height_public_quasi_public",
          "value": 5,
          "unit": "stories",
          "condition": "churches, schools, public/quasi-public buildings (§ 6-4.I)"
        },
        {
          "field": "max_accessory_building_height",
          "value": 18,
          "unit": "feet",
          "condition": "accessory buildings, measured from grade to tallest portion (§ 6-3.E)"
        },
        {
          "field": "max_building_height",
          "value": 35,
          "unit": "feet",
          "condition": "MH-zoned land not developed as a manufactured home subdivision, developed under SF-2 regulations (or 2-1/2 stories)"
        }
      ],
      "evidence": "§ 4-4.D table: 'Maximum Building Height 20 ft.' § 4-4.E: the 'maximum building height ... as pertains to the \"MH\" district, shall conform to ... the Area Requirements table.' § 4-4.B: 'Land zoned \"MH\" which is not developed as a manufactured home subdivision may be developed in accordance with \"SF2\" zoning district regulations.' § 6-4.B: 'Height regulations do not apply to steeples, domes, cupolas ...' § 6-4.I: public and quasi-public buildings 'not to exceed sixty (60) feet or five (5) stories.' § 6-3.E: accessory 'maximum height allowed is eighteen feet (18').'",
      "limitations": "The MH table gives a feet limit only, with no story limit. Planned Development ordinances could override the limit but are not provided."
    },
    {
      "id": "a67cb76a0cc477287d8e53f7eac4e90cc89c46aad119d58a1e79a7bd4afe5384",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "Township-wide rule: a use is allowed in a district only if that district lists it. Unlisted uses are prohibited. Permitted ('principal uses permitted') and special land uses are limited to the uses specifically listed for each district. A permitted use must meet the district's minimum requirements plus other applicable ordinance requirements. A special land use may be allowed only after special procedures, with the Planning Commission applying the Sec. 6.5.B standards and any special conditions for that use. The Use Matrix is only a summary; if it conflicts, the district lists control.",
      "citation": "Sec. 3.24.A-B (p. 3-60); Sec. 2.2 'Special land use' (p. 2-31); Use Matrix notes (pp. xi-xxi)",
      "numeric_facts": [],
      "evidence": "Sec. 3.24.A (p. 3-60): 'Unless a use is permitted in a particular zoning district, it shall be prohibited in that zoning district.' Sec. 3.24.B: 'A special land use shall be a use ... which may be permitted in that district only after following special procedures ... the Planning Commission shall apply the standards contained in Section 6.5.B.' Use Matrix: 'If there are any conflicts between this table and the uses listed in Section 3.1, the latter will control.'",
      "limitations": "The Sec. 6.5 special land use procedures/standards and the Sec. 4.24 commercial use standards are not in the excerpt. District-specific use lists vary by district."
    },
    {
      "id": "cfb1b4be0f8b8d1b9c42702fd585d37a942da3c7c9462c5025105df725cb0c9d",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "Cannot be determined from the excerpt. The only content provided is the definition: a variance is a ZBA relaxation of dimensional regulations where it is not contrary to the public interest, and where conditions peculiar to the property (not caused by the applicant) would make literal enforcement result in practical difficulty. The procedure in Sec. 7.16 (Zoning Board of Appeals) is not included.",
      "citation": "Sec. 2.2 'Variance' (p. 2-33); Sec. 7.16 listed in TOC (p. 7-10), text not provided",
      "numeric_facts": [],
      "evidence": "p. 2-33: 'Variance. A relaxation by the Zoning Board of Appeals of the dimensional regulations of the Ordinance where such action will not be contrary to the public interest ... a literal enforcement of this Ordinance would result in practical difficulty.'",
      "limitations": "The excerpt omits the Sec. 7.16 application, notice, hearing, standards, vote and appeal provisions."
    },
    {
      "id": "c711fb10464f800b85b3ed029a247805445aa8a9a535120ceeec98f34237c100",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "C-1 setbacks:\n- Rear yard: minimum 24 ft.\n- Side yard not abutting a street or alley: minimum 20 ft.\n- Side yard abutting residential: minimum 30 ft.\n- Front and street-side: per Sec. 3.27.C, measured from the road right-of-way centerline (building/parking): arterial and minor arterial 105/70; collector 88/53; local 75/40; cul-de-sac radius 105/70; freeway and major arterial 45/10 (freeways measured from the right-of-way line); private road 45/20 (measured from the easement line).\n- Footnote 2: parking setbacks apply only to new development. Modifications to existing sites need a 3-ft brick wall or an alternative treatment the Planning Commission accepts.\n- Footnote 3: the Planning Commission may vary the setback at site plan review.\n- Setbacks are measured from the principal building's exterior wall (3.28.B.2).\n- Lots with frontage on two streets must observe front setbacks from both (3.28.B.16, if applicable).",
      "citation": "Sec. 3.13.E (p. 3-27); Sec. 3.27.C and footnotes 2-3 (p. 3-62); Sec. 3.28.B.2-3",
      "numeric_facts": [
        {
          "field": "rear_setback_min",
          "value": 24,
          "unit": "ft",
          "condition": "C-1"
        },
        {
          "field": "side_setback_min",
          "value": 20,
          "unit": "ft",
          "condition": "not abutting street or alley"
        },
        {
          "field": "side_setback_min",
          "value": 30,
          "unit": "ft",
          "condition": "abutting residential"
        },
        {
          "field": "front_building_setback_from_centerline",
          "value": 105,
          "unit": "ft",
          "condition": "arterial/minor arterial"
        },
        {
          "field": "front_parking_setback_from_centerline",
          "value": 70,
          "unit": "ft",
          "condition": "arterial/minor arterial"
        },
        {
          "field": "front_building_setback_from_centerline",
          "value": 88,
          "unit": "ft",
          "condition": "collector"
        },
        {
          "field": "front_parking_setback_from_centerline",
          "value": 53,
          "unit": "ft",
          "condition": "collector"
        },
        {
          "field": "front_building_setback_from_centerline",
          "value": 75,
          "unit": "ft",
          "condition": "local"
        },
        {
          "field": "front_parking_setback_from_centerline",
          "value": 40,
          "unit": "ft",
          "condition": "local"
        },
        {
          "field": "front_building_setback",
          "value": 45,
          "unit": "ft",
          "condition": "freeway/major arterial; private road"
        },
        {
          "field": "front_parking_setback",
          "value": 10,
          "unit": "ft",
          "condition": "freeway/major arterial"
        },
        {
          "field": "front_parking_setback",
          "value": 20,
          "unit": "ft",
          "condition": "private road"
        }
      ],
      "evidence": "p. 3-27: 'Minimum rear yard setback: 24 ft. Minimum side yard setback: Not abutting street or alley 20 ft. Abutting residential 30 ft.' p. 3-62 table 3.27.C, C-1 column: '105/70 ... 88/53 ... 75/40 ... 45/10 ... 45/20'.",
      "limitations": "The District Summary Table (p. xxiii) conflicts with the district page: it shows rear 20 ft and side '20 abutting street or alley'. I followed the Article 3 district page because the summary defers to it. The C-1 page is truncated after the setbacks, so district-specific notes are not visible. The applicability matrix for Sec. 3.28 notes lost its marks in extraction. General exceptions (Sec. 3.38) are not provided."
    },
    {
      "id": "328697727a44698718ee36e1fff572d6337a8497410a780483d52c09d09b780b",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "C-3 principal permitted uses (subject to the Sec. 4.24 standard):\n1. Professional office buildings\n2. All principal uses permitted in the immediately abutting R-1-A, R-1-B, R-1-C or R-2 district\n3. General merchandise, department and variety stores\n4. Home furniture, furnishings and equipment stores\n5. Eating and drinking establishments, including fast-food restaurants and coffee shops with drive-thru windows\n6. Grocery stores and supermarkets\n7. Retail, general\n8. Pet shops\n9. Photographic studios\n10. Motion picture theaters, except drive-ins\n11. Art galleries\n12. Health and athletic clubs\n13. Accessory buildings and uses\n14. Temporary buildings\n15. Hookah lounges with license\n16. Amusement device centers\n17. Churches\n\nSpecial land uses: gas stations and auto service; private schools; nurseries and greenhouses; outdoor retail sales of plant material, lawn furniture, playground equipment and garden supplies; PUD; public utility buildings without storage; children's amusement park and similar recreation; communication towers.\n\nAccessory uses: propane sales; massage therapy.\n\nC-3 conditions (Sec. 3.33.G):\n- Site of 5 or more acres.\n- Initial construction of at least 20,000 sq ft and at least 3 permitted or special uses.\n- Outdoor display and storage prohibited except as approved by the Township Board as a special land use; sidewalk sales per Sec. 4.63.",
      "citation": "Sec. 3.15.B-D (p. 3-30); Sec. 3.33.D, G (pp. 3-76 to 3-77)",
      "numeric_facts": [
        {
          "field": "min_site_area",
          "value": 5,
          "unit": "acres",
          "condition": "C-3 development site (Sec. 3.33.G.1)"
        },
        {
          "field": "min_initial_floor_area",
          "value": 20000,
          "unit": "sq ft",
          "condition": "initial construction, with at least 3 uses (Sec. 3.33.G.2)"
        }
      ],
      "evidence": "p. 3-30, 3.15.B: 'The following uses are permitted subject to the standard in Section 4.24. 1. Professional office buildings ... 17. Churches §4.4'. 3.15.C lists special land uses 1-8.",
      "limitations": "The Sec. 4.24 and Article 4 use-specific standards are not provided. The Use Matrix differs in places and is non-controlling."
    },
    {
      "id": "bdfafecd32ecfca8c85b7376417f445b05c6e12a325b3f661141876f2b864f97",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "There is no fixed percentage. In C-4, maximum lot coverage is governed by meeting all requirements for yard space, landscaping, screening, off-street parking, loading and road rights-of-way.",
      "citation": "Sec. 3.33.A.9.a (p. 3-75)",
      "numeric_facts": [],
      "evidence": "p. 3-75, 3.33.A.9.a: 'In the O-1, O-2, C-1, C-2, C-3 and C-4 districts, maximum lot coverage shall be governed by meeting all requirements for yard space, landscaping, screening, off-street parking, loading and road rights-of-way.'",
      "limitations": "The C-4 district development standards page (Sec. 3.16.E) is not in the excerpt. It probably cross-references 3.33.A.9 as the other office/commercial pages do, but that is not shown."
    },
    {
      "id": "ed29b4dfe3e28c388b251605d8de31ccdcc8577a355c46f2e2cd5f8b8432457f",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "There is no fixed percentage. In O-2, maximum lot coverage is governed by meeting all requirements for yard space, landscaping, screening, off-street parking, loading and road rights-of-way.",
      "citation": "Sec. 3.12.E (p. 3-25); Sec. 3.33.A.9.a (p. 3-75)",
      "numeric_facts": [],
      "evidence": "p. 3-25: 'Maximum lot coverage: Section 3.33.A.9'. p. 3-75: 'In the O-1, O-2 ... districts, maximum lot coverage shall be governed by meeting all requirements for yard space, landscaping, screening, off-street parking, loading and road rights-of-way.'",
      "limitations": "Indirect limits from the related yard, landscaping and parking sections are not quantified here."
    },
    {
      "id": "9576de21b2c435199f73010c435e263d220467721064a1ea0aa69cd790cc1a3a",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Maximum building height in R-1-C is 35 ft. Height is measured from the average curb elevation (or from average grade along the building front if the building is set back) to: the highest point of a flat roof; the deck line of a mansard roof; or the midpoint between eaves and ridge of a gable, hip or gambrel roof.",
      "citation": "Sec. 3.5.D (p. 3-11); Sec. 2.2 'Building height' (p. 2-9)",
      "numeric_facts": [
        {
          "field": "max_building_height",
          "value": 35,
          "unit": "ft",
          "condition": "R-1-C"
        }
      ],
      "evidence": "p. 3-11: 'Building Height Maximum building height: 35 ft.'",
      "limitations": "General exceptions in Sec. 3.38 (e.g., chimneys, spires) are not provided."
    },
    {
      "id": "197ccae1eb06ad6df48b61dc052ca97744c9edb21ab2152f34e0ae7d7eb02d6c",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Maximum building height in R-2 is 2 stories, not to exceed 35 ft. Height is measured per the Sec. 2.2 definition of building height.",
      "citation": "Sec. 3.6.D (p. 3-13)",
      "numeric_facts": [
        {
          "field": "max_building_height",
          "value": 35,
          "unit": "ft",
          "condition": "R-2"
        },
        {
          "field": "max_stories",
          "value": 2,
          "unit": "stories",
          "condition": "R-2"
        }
      ],
      "evidence": "p. 3-13: 'Maximum building height: 2 stories not to exceed 35 ft.'",
      "limitations": "Sec. 3.38 general exceptions are not provided."
    },
    {
      "id": "b83d51fea2f8a3ba647803fc6c58d376c0a8b714bc775a09dd95c153f9526ae2",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "R-4 (governed by the R-3 to R-7 standards):\n- Minimum lot area: 24,000 sq ft.\n- Minimum frontage: 100 ft.\n- Maximum density: 4 dwelling units per acre.\n- Uses permitted 'as regulated' in the abutting one-family district, and two-family uses per Sec. 3.6, follow those districts' standards.",
      "citation": "Sec. 3.7.D (p. 3-15)",
      "numeric_facts": [
        {
          "field": "min_lot_area",
          "value": 24000,
          "unit": "sq ft",
          "condition": "R-3 to R-7 incl. R-4"
        },
        {
          "field": "min_frontage",
          "value": 100,
          "unit": "ft",
          "condition": "R-3 to R-7"
        },
        {
          "field": "max_density",
          "value": 4,
          "unit": "dwelling units/acre",
          "condition": "R-4"
        }
      ],
      "evidence": "p. 3-15: 'Minimum lot area: 24,000 sq. ft. Minimum frontage: 100 ft.'; 'R-4 Multiple-Family 4 Dwelling Units' (Maximum Density Per Acre).",
      "limitations": "The summary table mislabels a row as 'R-4 to R-12'. Sec. 3.31 multiple-family regulations are not provided."
    },
    {
      "id": "579c41193eaa40c469815c76230fbbe385f87f79036797f01e97d6f907e4e008",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "B-1 setbacks are set by the Article 22 Schedule of Regulations (Sec. 5.153). The B-1 row appears to show three 15 ft yard values (likely front and rear, plus one side value) together with footnotes (s) and (c). The extracted table layout does not reliably show which yard columns carry footnote (c), or whether 15 is the least-side or total-sides figure. The text of footnotes (c) and (s) (Sec. 5.195) is not in the excerpt. Sec. 5.45 (Nonresidential Setback from Residential) is also not provided. The minimum yards therefore cannot be reliably stated.",
      "citation": "Sec. 5.153; Sec. 5.194 Schedule of Regulations (p. 370-371); Sec. 5.151(4) (p. 303-304)",
      "numeric_facts": [],
      "evidence": "Sec. 5.153 (p. 304): 'See Article 22, \"Schedule of Regulations,\" which ... provides minimum yard setback requirements.' Sec. 5.194 English table (p. 370), B-1 row: '25 (s) (c) (c) / 15 15 15'. Metric table (p. 371): '7.625 (s) (c) (c) / 4.575 4.575 4.575'. Sec. 5.151(4): 'At least fifty (50%) percent of any required front yard shall be landscaped. Along any side or rear lot line abutting a street ... continuous landscaped area with a minimum width equal to one-half (1/2) the width of the required yard.'",
      "limitations": "The flattened table loses column alignment between front, least side, total sides and rear. Notes (c) and (s) in Sec. 5.195 are omitted, and Sec. 5.45 (nonresidential setback from residential) is omitted. The provided text is incomplete."
    },
    {
      "id": "acbc0c222fa91c4ea2cb857c5f43c3f77e2db968a8ced530daf0b8525e400e08",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "R-1 requires a minimum lot area of 9,000 sq ft per dwelling unit and a minimum lot width of 70 ft, measured at the minimum required building line (Sec. 5.19). Under Sec. 5.23(4), a single-family dwelling may still be built on a nonconforming lot of record that fails the area or width requirements, provided yard and other non-area/width requirements are met.",
      "citation": "Sec. 5.193 Schedule of Regulations (p. 368); Sec. 5.19 (p. 35); Sec. 5.23(4) (p. 116)",
      "numeric_facts": [
        {
          "field": "min_lot_area",
          "value": 9000,
          "unit": "sq_ft",
          "condition": "per dwelling unit"
        },
        {
          "field": "min_lot_width",
          "value": 70,
          "unit": "ft",
          "condition": "at minimum required building line"
        }
      ],
      "evidence": "Sec. 5.193 table (p. 368): 'R 1  9,000  70  25  2  40  8  20  35  1,000  30'. Metric table (p. 369): 'R 1 837 21.35'. Sec. 5.19: 'No dwelling shall be built upon a lot having a width, at the minimum required building line, of less than the lot width as required in the \"Schedule of Regulations\"'.",
      "limitations": "The text of Sec. 5.68 (Lot Area), Sec. 5.70 (Single Family Cluster Option) and the Sec. 5.195 notes is not in the excerpt and may add qualifications. The R-1 lot-area cell shows no footnote."
    },
    {
      "id": "f1f7b33fbac1de2ae9990eff48c7e9f613d835ea7732474a7865dc4f4e915fd6",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "In R-E, a one-family dwelling together with its accessory buildings may cover at most 30% of the lot area.",
      "citation": "Sec. 5.66 (p. 235); Sec. 5.193 Schedule of Regulations (p. 368)",
      "numeric_facts": [
        {
          "field": "max_lot_coverage",
          "value": 30,
          "unit": "percent",
          "condition": "one family dwelling together with accessory buildings"
        }
      ],
      "evidence": "Sec. 5.66: 'the maximum percent of the area of a lot that one (1) family dwellings, together with accessory buildings, may occupy shall be as set forth in the \"S[chedule]...\"'. Sec. 5.193 (p. 368), R E row ends '1,400  30'. Metric table: 'R E ... 130.2  30'.",
      "limitations": "The rest of Sec. 5.66 and Sec. 5.69 (Accessory Buildings) are truncated or absent. No footnote is shown on the R-E coverage cell."
    },
    {
      "id": "8ea4a4c34848c917df237d364bc9563fbf1cfafff76762b380295daa5f2e065b",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "R-E requires a minimum lot area of 20,000 sq ft per dwelling unit and a minimum lot width of 70 ft... correction: the minimum lot width is 90 ft, measured at the minimum required building line. The nonconforming lot-of-record relief in Sec. 5.23(4) applies.",
      "citation": "Sec. 5.193 Schedule of Regulations (p. 368); Sec. 5.19 (p. 35); Sec. 5.61 (p. 229)",
      "numeric_facts": [
        {
          "field": "min_lot_area",
          "value": 20000,
          "unit": "sq_ft",
          "condition": "per dwelling unit"
        },
        {
          "field": "min_lot_width",
          "value": 90,
          "unit": "ft",
          "condition": "at minimum required building line"
        }
      ],
      "evidence": "Sec. 5.193 table (p. 368): 'R E  20,000  90  25  2  40  10  25  35  1,400  30'. Metric table (p. 369): 'R E 1860 27.45'. Sec. 5.61 describes R-E as applying where existing development 'clearly meets the requirements of this district'.",
      "limitations": "Sec. 5.68 (Lot Area), Sec. 5.70 (Cluster Option) and the Sec. 5.195 notes are not provided and may add qualifications."
    },
    {
      "id": "1b8ffe29130f8c674621a18d5f165cf4a3a31a8c5c914e6b6fb3a774f44883f1",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "RC yard setbacks are set by the Article 22 Schedule of Regulations (Sec. 5.142). The RC row shows yard values of 75, 50 and 75 ft, each subject to footnote (v), which is not provided. The flattened layout does not establish whether 50 ft is the least-side or total-sides figure. Separately, Sec. 5.141(3) requires a continuous landscaped strip at least 25 ft wide along any lot line abutting a street (except at approved access points), and no more than 50% of a required street yard may be used for parking and driveways. Sec. 5.141(6) states parking structures follow the Schedule setbacks. The minimum yards cannot be reliably stated without note (v).",
      "citation": "Sec. 5.142 (p. 300); Sec. 5.194 Schedule of Regulations (p. 370-371); Sec. 5.141(3),(6) (p. 298-299)",
      "numeric_facts": [
        {
          "field": "street_landscape_strip_min_width",
          "value": 25,
          "unit": "ft",
          "condition": "adjacent to any lot line abutting a street, except at approved vehicular access points"
        },
        {
          "field": "max_street_yard_parking_share",
          "value": 50,
          "unit": "percent",
          "condition": "share of required yard abutting a street usable for parking and driveways"
        }
      ],
      "evidence": "Sec. 5.194 English table (p. 370), RC row: '(u) 10 acres (b) (v) (v) (v) (t) / 75 50 75'. Metric table (p. 371): '22.875 15.25 22.875'. Sec. 5.141(3): 'Not more than fifty (50%) percent of the area of any required yard abutting a street shall be used for vehicular parking ... continuous landscaped area not less than twenty-five (25') feet ... wide'.",
      "limitations": "Footnote (v) in Sec. 5.195 is missing and likely modifies the yards. Column alignment is ambiguous. Sec. 5.45 is not provided."
    },
    {
      "id": "576e5dbd947e7957c342362cd26f717dd624ab2272980d15fdf6611b3466424e",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Every RM use requires site plan approval under Sec. 5.22; single-family structures are exempt from site plan review.\n\nPermitted by right (Sec. 5.83):\n(1) All principal uses permitted in single-family districts. Per Sec. 5.62, these are one-family dwellings, farms, accessory uses, and licensed family child care homes. They must meet requirements at least equal to the most restrictive immediately abutting residential district; if none abuts, the least restrictive residential district's requirements apply.\n(2) Two-family dwellings.\n(3) Multiple-family dwellings of no more than 2 stories, subject to a minimum land area per unit:\n- 1-bedroom: 2,290 sq ft (19 du/ac)\n- 2-bedroom: 2,720 sq ft (16 du/ac)\n- 3-bedroom: 3,350 sq ft (13 du/ac)\n- 4-bedroom: 3,960 sq ft (11 du/ac)\n(4) Accessory buildings and uses customarily incidental to the above.\n(5) Parking per Sec. 5.30.\n\nSpecial approval (Sec. 5.84), by City Council after a Planning Commission recommendation:\n- Housing for the elderly, after Housing Commission review.\n- Minimum unit sizes: 525 sq ft for 1-bedroom, 700 sq ft for 2-bedroom, and up to 25% efficiencies of at least 425 sq ft.\n- 1,500 sq ft of land per unit (29 du/ac) for 2 stories.\n- A recorded use covenant is required.\n- Adult day services may be an accessory use to elderly housing, also by special approval.\n\nUse restrictions (Sec. 5.85):\n- Every unit must have at least one living room and one bedroom, except elderly-housing efficiencies.\n- Every unit must have at least 2 rooms of 80 sq ft or more, excluding kitchen and sanitary facilities.\n- No more than 90% of units may be 1-bedroom.",
      "citation": "Sec. 5.82-5.85 (p. 248-250); Sec. 5.62 (p. 229-230)",
      "numeric_facts": [
        {
          "field": "max_multifamily_stories",
          "value": 2,
          "unit": "stories",
          "condition": "multiple family dwellings permitted by right"
        },
        {
          "field": "land_area_per_unit",
          "value": 2290,
          "unit": "sq_ft",
          "condition": "1-bedroom multiple family unit"
        },
        {
          "field": "land_area_per_unit",
          "value": 2720,
          "unit": "sq_ft",
          "condition": "2-bedroom multiple family unit"
        },
        {
          "field": "land_area_per_unit",
          "value": 3350,
          "unit": "sq_ft",
          "condition": "3-bedroom multiple family unit"
        },
        {
          "field": "land_area_per_unit",
          "value": 3960,
          "unit": "sq_ft",
          "condition": "4-bedroom multiple family unit"
        },
        {
          "field": "elderly_housing_land_area_per_unit",
          "value": 1500,
          "unit": "sq_ft",
          "condition": "special approval; 2 stories"
        },
        {
          "field": "max_one_bedroom_share",
          "value": 90,
          "unit": "percent",
          "condition": "of dwelling units"
        }
      ],
      "evidence": "Sec. 5.83 (p. 248): '(1) All principal uses permitted in single family residence districts ... (2) Two family dwellings. (3) Multiple family dwellings not in excess of two (2) stories ... (4) Accessory buildings ... (5) Automobile parking'. Sec. 5.84(2)(a) (p. 249): 'Housing for the elderly upon review and report from the Southfield Housing Commission'. Sec. 5.85 (p. 250): 'not more than ninety (90%) percent of the units may be of the one (1) bedroom type.'",
      "limitations": "Uses authorized elsewhere in the ordinance (for example wireless facilities as special land uses under Sec. 5.58, and historic-district additional uses) are only partially shown. The excerpt is noncontiguous."
    },
    {
      "id": "e0332a544c4ac0d6d6ffcc60c4d2cf0b3f109a416bf5ab65779be1318480cd37",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "C-2 Professional Office: Front setback none. Interior side 5 ft, or 10 ft if abutting a residential district. Corner side 10 ft. Rear 15 ft, or 25 ft if abutting a residential district.",
      "citation": "UDC §5.3, Table 5-1 (p. 5-2)",
      "numeric_facts": [
        {
          "field": "front_setback",
          "value": 0,
          "unit": "ft",
          "condition": "none required"
        },
        {
          "field": "interior_side_setback",
          "value": 5,
          "unit": "ft",
          "condition": "not abutting residential district"
        },
        {
          "field": "interior_side_setback",
          "value": 10,
          "unit": "ft",
          "condition": "abutting residential district"
        },
        {
          "field": "corner_side_setback",
          "value": 10,
          "unit": "ft",
          "condition": "all"
        },
        {
          "field": "rear_setback",
          "value": 15,
          "unit": "ft",
          "condition": "not abutting residential district"
        },
        {
          "field": "rear_setback",
          "value": 25,
          "unit": "ft",
          "condition": "abutting residential district"
        }
      ],
      "evidence": "Table 5-1, C-2 column: 'Front Setback None'; 'Interior Side Setback 5', unless abutting residential district, then 10''; 'Corner Side Setback 10''; 'Rear Setback 15', unless abutting residential district, then 25''. §5.3.A: these apply 'to all uses within each district unless a different standard is listed for a specific use.'",
      "limitations": "The excerpts are incomplete. Use-specific standards in Art. 8, permitted encroachments in §9.4 (not provided), and accessory structure setbacks are not reflected. Under §9.3.A.5, detached accessories have a 5 ft minimum. Where a non-residential district abuts a residential district, §11.8 requires a buffer yard of at least 15 ft. That buffer may sit within the setback."
    },
    {
      "id": "2f868355324f338a2355e2e8d4fbd278746dda67a103d3b05d9b8a30ba8e2797",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "Unresolved. Table 8-1 governs uses, but the extracted text does not reliably establish which uses are P or S in the C-D-E1 sub-district.",
      "citation": "UDC §5.2; §8.2, Table 8-1 (pp. 8-2 to 8-5)",
      "numeric_facts": [],
      "evidence": "§5.2: 'Article 8 lists permitted and special principal uses... for the commercial districts.' §8.2.B: 'P' means permitted by-right, 'S' means special use, and a blank cell means not allowed. Table 8-1 headers appear to show a single 'C-D' column, with no separate C-D-E1 column. §5.5.A.3 mentions 'use restrictions' for C-D-E2 that are not in the excerpt.",
      "limitations": "The column headers in the use matrix are scrambled in the extraction. The P/S cells cannot be reliably mapped to the C-D column. It is also unclear whether sub-district-specific use restrictions exist. The only sub-district provision in the excerpt is §5.5.C.1: converting a single- or two-family dwelling to a non-residential use requires site plan review."
    },
    {
      "id": "b36f6cf5e536553a885c9c355c72fa12f4371007cd4194cb130ca8cdd1adb9fe",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "C-D-E2: maximum building height 40 ft and minimum building height 14 ft. Height is measured under §2.4.D, and the appurtenances listed there are exempt.",
      "citation": "UDC §5.5.B, Table 5-3 (p. 5-6); §2.4.D (pp. 2-21 to 2-22)",
      "numeric_facts": [
        {
          "field": "max_building_height",
          "value": 40,
          "unit": "ft",
          "condition": "C-D-E2 principal buildings"
        },
        {
          "field": "min_building_height",
          "value": 14,
          "unit": "ft",
          "condition": "C-D-E2 principal buildings"
        }
      ],
      "evidence": "Table 5-3, C-D-E2 column: 'Maximum Building Height 40''; 'Minimum Building Height 14''. §2.4.D.1 measures height from the average grade at the front lot line to: a flat roof top; a mansard or gambrel deck line; or the eave-to-ridge midpoint of a pitched roof. §2.4.D.3 exempts chimneys, steeples, and mechanical penthouses.",
      "limitations": "§5.5.B says existing residential uses in C-D-E1/E2 are subject to the dimensional standards of 'item C below', but §5.5.C contains design standards and no alternative height figures appear in the excerpt. Other limits may apply but are not fully shown: detached accessories are capped at 12 ft (§9.3.A.4), and the HS overlay restriction appears only as a fragment."
    },
    {
      "id": "db431bc634bf712697426564eea4f0be1a45a680432d058ffcb1b7deba0512cd",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "Unresolved. §7.5, the F-1 Open Floodway District section, is not included in the excerpts.",
      "citation": "UDC Art. 7 TOC (§7.5, p. 7-8); §8.2 Table 8-1",
      "numeric_facts": [],
      "evidence": "TOC: '7.5 F-1 OPEN FLOODWAY DISTRICT ... 7-8'. §2.3.A.1: 'General definitions for the F-1 District are located in Article 7.' The Table 8-1 headers as extracted do not clearly include an F-1 column.",
      "limitations": "The F-1 use provisions on pp. 7-8 to 7-21 are omitted from the excerpt. It cannot be determined whether F-1 uses come from §7.5 or from Table 8-1."
    },
    {
      "id": "655eea5d5795e3b0d1617c8cb7298d8acf5958bf40c31f6e69a98220089cf28a",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "Unresolved as to the full list. Table 8-1 governs, but its column alignment is unreliable in the extraction. One I-2-specific rule is clear: any requested use with no comparable use in any district may be allowed in I-2 after a special use permit is approved.",
      "citation": "UDC §6.2; §8.1.C; §8.2, Table 8-1 and footnote (p. 8-6)",
      "numeric_facts": [],
      "evidence": "Table 8-1 footnote: 'Any requested use that does not have a comparable use within any zoning district may be allowed within the I-2 (General Industrial District) after approval of a special-use permit.' §8.1.C: 'Any use that is not included in the use matrix is prohibited in all districts.' §6.1.B describes the district's purpose: general manufacturing, fabricating, processing, wholesale distributing, and warehousing.",
      "limitations": "The matrix headers and cell spacing are garbled, so P/S/blank values cannot be reliably assigned to the I-2 column. That includes rows such as Industrial-General, Warehouse, and Sexually-Oriented Business."
    },
    {
      "id": "1fc7ddbb2ee621766174315de3750740dd546686037ec9a0d41cfd05217e449e",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "R-4: maximum building height 40 ft, measured under §2.4.D. Detached accessory structures are limited to 12 ft, and detached garages to 15 ft.",
      "citation": "UDC §4.3, Table 4-1 (p. 4-4); §2.4.D; §9.3.A.4; §9.3.M.2",
      "numeric_facts": [
        {
          "field": "max_building_height",
          "value": 40,
          "unit": "ft",
          "condition": "principal building"
        },
        {
          "field": "max_accessory_structure_height",
          "value": 12,
          "unit": "ft",
          "condition": "detached accessory structure"
        },
        {
          "field": "max_detached_garage_height",
          "value": 15,
          "unit": "ft",
          "condition": "single-family detached garage"
        }
      ],
      "evidence": "Table 4-1 'Maximum Building Height': R-A through R-5 each 40', R-6/R-7 50'. §9.3.A.4: 'maximum height of any detached accessory structure is 12 feet in all districts except for the AG, R-A, R-R, and R-1.' §9.3.M.2: 'A detached garage may be up to 15 feet in height.' §2.4.D.3 exempts listed appurtenances.",
      "limitations": "Table 4-1 applies 'unless a different standard is listed for a specific use'. Use standards in Art. 8 are only partially excerpted."
    },
    {
      "id": "4ffc3b2da75d67ba1b0341ea3a931486a3aae40e12cb1e4ca2923486e5e79bd6",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "R-5 setbacks vary by dwelling type:\n- Front: SF/2F/3F build-to zone of 20–25 ft; TH 20 ft per individual TH lot.\n- Interior side: SF 5 ft; 2F/3F 5 ft from the side lot line or 10 ft between residential buildings; TH none.\n- Corner side: SF/2F/3F 10 ft; TH none.\n- Reverse corner side: 20 ft (SF/2F/3F only).\n- Rear: 25 ft.\nFootnote ~ refers to §8.3.K.1 for townhome building separation and perimeter yards.",
      "citation": "UDC §4.3, Table 4-1 and footnote ~ (pp. 4-4 to 4-5)",
      "numeric_facts": [
        {
          "field": "front_build_to_zone_min",
          "value": 20,
          "unit": "ft",
          "condition": "SF, 2F, 3F"
        },
        {
          "field": "front_build_to_zone_max",
          "value": 25,
          "unit": "ft",
          "condition": "SF, 2F, 3F"
        },
        {
          "field": "front_setback",
          "value": 20,
          "unit": "ft",
          "condition": "TH, each individual TH lot"
        },
        {
          "field": "interior_side_setback",
          "value": 5,
          "unit": "ft",
          "condition": "SF; 2F/3F from side lot line"
        },
        {
          "field": "building_separation",
          "value": 10,
          "unit": "ft",
          "condition": "2F/3F between residential buildings"
        },
        {
          "field": "interior_side_setback",
          "value": 0,
          "unit": "ft",
          "condition": "TH (none)"
        },
        {
          "field": "corner_side_setback",
          "value": 10,
          "unit": "ft",
          "condition": "SF, 2F, 3F"
        },
        {
          "field": "corner_side_setback",
          "value": 0,
          "unit": "ft",
          "condition": "TH (none)"
        },
        {
          "field": "reverse_corner_side_setback",
          "value": 20,
          "unit": "ft",
          "condition": "SF, 2F, 3F only"
        },
        {
          "field": "rear_setback",
          "value": 25,
          "unit": "ft",
          "condition": "all dwelling types"
        }
      ],
      "evidence": "Table 4-1, R-5 column:\n- Front: 'SF, 2F, 3F Build-To Zone: 20' to 25''; 'TH: 20' for each individual TH lot (Ord. 19-09)'.\n- Interior side: 'SF: 5'; 2F, 3F: 5' from side lot line or 10' between residential buildings; TH: None'.\n- Corner side: 'SF, 2F, 3F: 10'; TH: None'.\n- Reverse corner: 20'. Rear: 25'.\n- Footnote ~: 'See article 8.3.K.1 for multi-family and townhome building separation and perimeter yard requirements.'",
      "limitations": "The front setback cells for R-4, R-5, and R-6 are interleaved in the extraction. Assigning the 20–25 ft build-to zone plus TH 20 ft to R-5 is a reconstruction from text order. §8.3.K.1 is not provided. §2.4.Q.3.c applies interior side setbacks only to end units in townhouse developments."
    },
    {
      "id": "7b91bcea73b1855cfe0bbe4185a7c16dc3d4e13608827d6a54c84926f6b5133b",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "R-A: maximum building coverage 20% and maximum impervious surface 35%. These limits apply per individual lot when one dwelling sits on one platted lot. When multiple dwellings share a lot or development site, they apply to the whole site. Detached accessory structures count toward both limits, except structures for an active agricultural use.",
      "citation": "UDC §4.3, Table 4-1 and footnotes ^ and * (pp. 4-4 to 4-5); §2.4.C, §2.4.I; §9.3.A.6",
      "numeric_facts": [
        {
          "field": "max_building_coverage",
          "value": 20,
          "unit": "percent",
          "condition": "per single-family lot with one dwelling; else per development site"
        },
        {
          "field": "max_impervious_surface",
          "value": 35,
          "unit": "percent",
          "condition": "per single-family lot with one dwelling; else per development site"
        }
      ],
      "evidence": "Table 4-1: 'Maximum Building Coverage ^ 20%' and 'Maximum Impervious Surface * 35%' for R-A. Footnote ^: 'per individual single-family lot in the R-A through R-6 District when one dwelling is located on one platted lot...'. §9.3.A.6: detached accessory structures 'are included in and must comply with all maximum impervious surface and building coverage requirements', except active agricultural accessories. §2.4.I.2: pervious concrete and grid pavers count as 50% impervious.",
      "limitations": "Use-specific overrides in Art. 8 are not fully excerpted."
    },
    {
      "id": "16d5f526b4de468e893940cef43be1986da297a9cd7daa53e4f006ae0188a96d",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "R-MH development is limited to manufactured home parks:\n- Minimum park area: 5 acres.\n- Maximum density: 4 manufactured homes per gross acre.\n- No minimum area is stated for an individual home site.\n- A home may cover at most 25% of its site; home plus attached features, accessories, and paving at most 60%.\n- Required clearances: 35 ft side-to-side, 25 ft end-to-end, and 10 ft from a site boundary to an interior street.\n- A 25 ft perimeter yard is required around the park.",
      "citation": "UDC §4.4.A, §4.4.C, §4.4.D (pp. 4-7 to 4-9); §4.3",
      "numeric_facts": [
        {
          "field": "min_park_area",
          "value": 5,
          "unit": "acres",
          "condition": "manufactured home park"
        },
        {
          "field": "max_density",
          "value": 4,
          "unit": "homes per gross acre",
          "condition": "manufactured home park"
        },
        {
          "field": "max_home_site_coverage",
          "value": 25,
          "unit": "percent",
          "condition": "manufactured home on its site"
        },
        {
          "field": "max_total_site_coverage",
          "value": 60,
          "unit": "percent",
          "condition": "home, attached features, accessories, paving"
        },
        {
          "field": "perimeter_yard",
          "value": 25,
          "unit": "ft",
          "condition": "park perimeter"
        }
      ],
      "evidence": "§4.3: 'standards for development in the R-MH District are found in Section 4.4.' §4.4.A.1: 'The minimum area of a manufactured home park is five acres.' §4.4.A.2: 'maximum overall density... is four manufactured homes per gross acre.' §4.4.D.3: home 'cannot occupy an area in excess of 25% of its respective site area... cannot exceed 60%'.",
      "limitations": "The excerpt states no minimum lot or site area for an individual manufactured home site. Manufactured homes outside a park are governed by §8.3.J, which is not provided."
    },
    {
      "id": "4884b6c14de99b7a7ec0c1f05e34d4b188619374b64720f1e12d158fa491e276",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "RD Research and Development:\n- Front: 30 ft minimum.\n- Corner side: 30 ft minimum.\n- Interior side: 10 ft. If abutting a residential district, 20 ft for structures 50 ft or less in height and 40 ft for structures over 50 ft.\n- Rear: same as interior side.",
      "citation": "UDC §6.3, Table 6-1 (p. 6-1)",
      "numeric_facts": [
        {
          "field": "front_setback",
          "value": 30,
          "unit": "ft",
          "condition": "all"
        },
        {
          "field": "corner_side_setback",
          "value": 30,
          "unit": "ft",
          "condition": "all"
        },
        {
          "field": "interior_side_setback",
          "value": 10,
          "unit": "ft",
          "condition": "not abutting residential district"
        },
        {
          "field": "interior_side_setback",
          "value": 20,
          "unit": "ft",
          "condition": "abutting residential; structure ≤50 ft tall"
        },
        {
          "field": "interior_side_setback",
          "value": 40,
          "unit": "ft",
          "condition": "abutting residential; structure >50 ft tall"
        },
        {
          "field": "rear_setback",
          "value": 10,
          "unit": "ft",
          "condition": "not abutting residential district"
        },
        {
          "field": "rear_setback",
          "value": 20,
          "unit": "ft",
          "condition": "abutting residential; structure ≤50 ft tall"
        },
        {
          "field": "rear_setback",
          "value": 40,
          "unit": "ft",
          "condition": "abutting residential; structure >50 ft tall"
        }
      ],
      "evidence": "Table 6-1, RD column: 'Minimum Front Setback 30''; 'Minimum Corner Side Setback 30''. Minimum Interior Side and Minimum Rear: '10', unless abutting a residential district, then: Structure 50' or less in height: 20'; Structure greater than 50' in height: 40''. RD maximum height is 80'.",
      "limitations": "The cells are interleaved in the extraction. The height-tiered text is attributed to RD because it is the rightmost column, and it is consistent with RD's 80 ft height limit. §6.4 Table 6-2 bars parking in the required front setback in RD. A 15 ft minimum buffer yard (§11.8) applies where RD abuts a residential district. Permitted encroachments in §9.4 are not provided."
    },
    {
      "id": "f202be79666b88500b8ec45f01566d4c0a88679f2991f5a5ffef9b69629b17e1",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "GR does not set its own parking ratio. Sec. 3.16 says parking is 'As established by Section 4.03', so the requirement depends on the use. Representative 4.03 ratios for uses permitted in GR:\n- Retail stores and shops: 1 space per 200 sq ft.\n- Office, professional and administrative: 1 per 300 sq ft.\n- Restaurant: 1 per 100 sq ft of seating or waiting area.\n- Bank or credit union: 1 per 200 sq ft, plus stacking.\n- Indoor amusement: 1 per 100 sq ft.\n\nSec. 5.02 qualifications:\n- In O, NS, GR and C, a development that puts 80% or more of required parking behind the front building plane may reduce the required spaces by 10%.\n- Standard spaces are 9'x18'.\n- Compact spaces (9'x16') are allowed in GR with administrative site plan approval: up to 10% of required parking to preserve trees, or up to 25% for single-tenant lots of more than 50 spaces serving large industrial or office buildings.\n- Fractions round up.\n- Mixed-use buildings are calculated at the most intensive use.\n- Bicycle parking is 10% of required auto spaces (minimum 2, maximum 20) when more than 10 auto spaces are required.\n- Loading berths are required from 10,001 sq ft of gross floor area.",
      "citation": "App. A Secs. 3.16, 4.03(c), 5.02(f),(g),(n),(o),(r),(v)",
      "numeric_facts": [
        {
          "field": "retail_parking_ratio",
          "value": 200,
          "unit": "sq ft per space",
          "condition": "Retail Stores and Shops"
        },
        {
          "field": "office_parking_ratio",
          "value": 300,
          "unit": "sq ft per space",
          "condition": "Office, Professional and Administrative"
        },
        {
          "field": "restaurant_parking_ratio",
          "value": 100,
          "unit": "sq ft seating/waiting area per space",
          "condition": "Restaurant"
        },
        {
          "field": "parking_reduction",
          "value": 10,
          "unit": "percent",
          "condition": "if >=80% of required parking is behind the front building plane (O, NS, GR, C)"
        },
        {
          "field": "standard_space_width",
          "value": 9,
          "unit": "feet",
          "condition": "standard space"
        },
        {
          "field": "standard_space_length",
          "value": 18,
          "unit": "feet",
          "condition": "standard space"
        },
        {
          "field": "compact_space_max_share",
          "value": 25,
          "unit": "percent",
          "condition": "single-tenant lots of more than 50 spaces with large industrial/office buildings; 10% where preserving trees"
        }
      ],
      "evidence": "Sec. 3.16 GR: 'Parking Regulations As established by Section 4.03'. Sec. 4.03 use chart, Parking Requirement column: 'Retail Stores and Shops ... 1 space per 200 sq ft'. Sec. 5.02(f)(i)(1): 'Developments that situate eighty (80) percent or more of their required parking behind the front building plane ... are eligible for a ten (10) percent reduction'.",
      "limitations": "The requirement is use-specific, so there is no single GR number. In the flattened use chart, matching each column marker to a district is not fully reliable; the parking ratio column itself is clear."
    },
    {
      "id": "35e45d14d1788a9a39798d53d01a9566ef7ce50316c1e5a971a8f88ce71fa5a5",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "HI does not set its own parking ratio. Sec. 3.21 says parking is 'As established by Section 4.03', so the requirement depends on the use. Typical 4.03 ratios for industrial uses:\n- Heavy and medium manufacturing, storage warehouse, chemical plant, data center and similar uses: 1 per 1,000 sq ft or 1 space per 2 employees.\n- Machine or welding shop: same formula.\n- Landfill: 1 per 300 sq ft of office.\n- Trailer and heavy load vehicle repair: 1 per 500 sq ft, minimum 5 spaces.\n- Truck stop: 1 truck space per 10,000 sq ft of site, plus 1 per 200 sq ft of building.\n\nSec. 5.02 qualifications:\n- Spaces are 9'x18'.\n- Compact spaces are allowed in HI with site plan approval: up to 10% (tree preservation) or 25% (single-tenant lots of more than 50 spaces with large industrial buildings).\n- Fractions round up.\n- Bicycle parking is 10% of required auto spaces (2–20 stalls).\n- Loading berths are 10'x45': 1 for 10,001–50,000 sq ft, 2 up to 100,000, 3 up to 200,000, then 1 per additional 100,000 sq ft.\n- Parking must be paved and striped.\n- The 10% behind-building reduction applies only to O, NS, GR and C, not HI.",
      "citation": "App. A Secs. 3.21, 4.03(d), 5.02(e),(g),(o),(r),(v)",
      "numeric_facts": [
        {
          "field": "industrial_parking_ratio",
          "value": 1000,
          "unit": "sq ft per space",
          "condition": "most industrial uses; alternative is 1 per 2 employees (chart does not state which governs)"
        },
        {
          "field": "industrial_parking_employee_ratio",
          "value": 2,
          "unit": "employees per space",
          "condition": "alternative industrial ratio"
        },
        {
          "field": "loading_berth_threshold",
          "value": 10001,
          "unit": "sq ft GFA",
          "condition": "first loading berth required"
        },
        {
          "field": "compact_space_max_share",
          "value": 25,
          "unit": "percent",
          "condition": "single-tenant lots >50 spaces with large industrial buildings"
        }
      ],
      "evidence": "Sec. 3.21 HI: 'Parking Regulations As established by Section 4.03'. Sec. 4.03(d), e.g. 'Heavy Manufacturing, Outdoor S 1/1,000 sq ft or 1 space per 2 emp'. Sec. 5.02(r)(vii): compact spaces 'In the O, NS, GR, LI1, LI2 and HI Districts'.",
      "limitations": "The requirement is use-specific. For '1/1,000 sq ft or 1 space per 2 emp', the chart does not say whether the greater or lesser governs. Matching use-chart columns to districts is unreliable in the flattened text."
    },
    {
      "id": "a681a1798120fe90c4809285681a0e9cb4ab3d9313371d5fcfa84cd4db1c1336",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "LI1 minimum yards:\n- Front yard: 40 ft.\n- Side yard: 30 ft.\n- Rear yard: 30 ft.\n\nRelated rules:\n- On corner lots, the front yard applies along both street frontages unless the plat provides otherwise (Sec. 7.06(b)(i)).\n- Yards are measured from any established future right-of-way line.\n- Loading docks facing the front lot line need a 75 ft setback from the right-of-way (Sec. 5.02(o)).\n- Antennas and support structures may not sit in required yards and must keep twice their height from residential districts (Sec. 7.08).\n- Open storage must be behind the front building line and meet main-building setbacks (Sec. 7.15).",
      "citation": "App. A Sec. 3.19; Secs. 7.06, 5.02(o), 7.08, 7.15",
      "numeric_facts": [
        {
          "field": "front_setback_min",
          "value": 40,
          "unit": "feet",
          "condition": "LI1"
        },
        {
          "field": "side_setback_min",
          "value": 30,
          "unit": "feet",
          "condition": "LI1"
        },
        {
          "field": "rear_setback_min",
          "value": 30,
          "unit": "feet",
          "condition": "LI1"
        },
        {
          "field": "loading_dock_front_setback",
          "value": 75,
          "unit": "feet",
          "condition": "loading dock facing the front lot line"
        }
      ],
      "evidence": "Sec. 3.19 LI1: 'Minimum Front Yard 40' Minimum Side Yard 30' Minimum Rear Yard 30''.",
      "limitations": "Sec. 3.19 lists no residential-adjacency increase for LI1, unlike LI2 and HI. Article IX illustrations are reserved and not provided."
    },
    {
      "id": "4a4c8816be9b3d4c4f0c46ef9fd652f46c507058bd140b580a71fdc696fab581",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "LI2 maximum height is 6 stories.\n\nRelated rules:\n- A story is defined as at most 12 ft per story (Sec. 4.01 def. 242), but the district standard itself is stated in stories, not feet.\n- Commercial antennas are allowed by right up to the district maximum height; taller ones need an SUP (Sec. 7.08(b)(i)).\n- The Sec. 7.16 cooling-tower and steeple allowances apply only in 2- or 2.5-story districts, so they do not apply to LI2.",
      "citation": "App. A Sec. 3.20; Secs. 4.01(f)(242), 7.08(b)",
      "numeric_facts": [
        {
          "field": "max_height_stories",
          "value": 6,
          "unit": "stories",
          "condition": "LI2"
        },
        {
          "field": "max_story_height",
          "value": 12,
          "unit": "feet",
          "condition": "definition of story"
        }
      ],
      "evidence": "Sec. 3.20 LI2: 'Height Regulations 6 stories'. Sec. 4.01 def. 242: 'The maximum height for a story shall be twelve (12) feet.'",
      "limitations": "No foot-based height limit is stated for LI2. Any implied 72 ft figure is derived, not stated."
    },
    {
      "id": "0df5f5ff5433e42689e64a227b4ade63ff1525e653ee5e9c4950e455fec660e3",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "MF2 minimum yards depend on what the lot is adjacent to and on building height.\n\nFront yard:\n- Adjacent to SF: 25 ft, or 75 ft if the building is over two stories.\n- Adjacent to MF or nonresidential: 25 ft, or 100 ft if over 2 stories.\n\nSide yard:\n- Adjacent to SF: 50 ft, or 75 ft if over two stories.\n- Adjacent to MF or nonresidential: 25 ft, or 100 ft if over 2 stories.\n\nRear yard:\n- Adjacent to residential: 50 ft, or 75 ft if over two stories.\n\nRelated rules:\n- All areas adjacent to a street are deemed front yards (Sec. 5.05(a)(ii)).\n- Building separation is 15 ft (1 story) or 20 ft (2 stories) without openings, and 25 ft or 35 ft with openings.\n- Refuse dumpsters must be at least 30 ft from adjacent single-family property.\n- Corner-lot and future right-of-way rules in Sec. 7.06 also apply.",
      "citation": "App. A Sec. 3.09; Secs. 5.05(a),(b), 7.06",
      "numeric_facts": [
        {
          "field": "front_setback_min",
          "value": 25,
          "unit": "feet",
          "condition": "adjacent to SF, or to MF/nonresidential, building 2 stories or less"
        },
        {
          "field": "front_setback_min",
          "value": 75,
          "unit": "feet",
          "condition": "adjacent to SF, over two stories"
        },
        {
          "field": "front_setback_min",
          "value": 100,
          "unit": "feet",
          "condition": "adjacent to MF/nonresidential, over 2 stories"
        },
        {
          "field": "side_setback_min",
          "value": 50,
          "unit": "feet",
          "condition": "adjacent to SF, 2 stories or less"
        },
        {
          "field": "side_setback_min",
          "value": 75,
          "unit": "feet",
          "condition": "adjacent to SF, over two stories"
        },
        {
          "field": "side_setback_min",
          "value": 25,
          "unit": "feet",
          "condition": "adjacent to MF/nonresidential, 2 stories or less"
        },
        {
          "field": "side_setback_min",
          "value": 100,
          "unit": "feet",
          "condition": "adjacent to MF/nonresidential, over 2 stories"
        },
        {
          "field": "rear_setback_min",
          "value": 50,
          "unit": "feet",
          "condition": "adjacent to residential"
        },
        {
          "field": "rear_setback_min",
          "value": 75,
          "unit": "feet",
          "condition": "adjacent to residential, over two stories"
        }
      ],
      "evidence": "Sec. 3.09: 'Minimum Front Yard Adjacent to SF - 25'. 75' if over two stories. Adjacent to MF or Nonresidential - 25'. 100' if over 2 stories Minimum Side Yard Adjacent to SF - 50'. 75' if over two stories. ... Minimum Rear Yard Adjacent to a residential; 50', over two story is 75''.",
      "limitations": "No rear yard is stated for MF2 lots adjacent to nonresidential uses. The text sets a larger over-2-story setback next to MF/nonresidential (100 ft) than next to SF (75 ft); this is extracted as written."
    },
    {
      "id": "6753ec1afcacd40566bd327a86332e1778248eb3a8e84c3581c07bd94ac6a548",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "MF2 maximum lot coverage is 40%, counting both main and accessory buildings. Lot coverage is defined as the area covered by all buildings and structures, including overhanging roofs (Sec. 4.01 def. 146).",
      "citation": "App. A Sec. 3.09; Sec. 4.01(f)(146)",
      "numeric_facts": [
        {
          "field": "max_lot_coverage",
          "value": 40,
          "unit": "percent",
          "condition": "main and accessory buildings"
        }
      ],
      "evidence": "Sec. 3.09 MF2: 'Maximum Lot Coverage 40% by main and accessory buildings'.",
      "limitations": "Townhouses in MF2 are governed separately by Sec. 5.09 (50%)."
    },
    {
      "id": "8808a61d5f5b30bf7dd2a0f1a4819f858b579e372c8a0f5c977305f484fa8f02",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "MH (Manufactured Home) lot requirements:\n- Minimum lot area: 3,000 sq ft per unit.\n- Minimum lot width: 35 ft.\n- Minimum lot depth: 80 ft.\n\nRelated rules:\n- Required 9'x18' parking spaces may not be counted in the lot size (Sec. 5.06(a)(iv)).\n- By definition, a HUD Code manufactured home park or mobile home park parcel must be between 5 and 25 acres.",
      "citation": "App. A Sec. 3.10; Secs. 5.06(a)(iv), 4.01(f)(125),(173)",
      "numeric_facts": [
        {
          "field": "min_lot_area",
          "value": 3000,
          "unit": "sq ft per unit",
          "condition": "MH"
        },
        {
          "field": "min_lot_width",
          "value": 35,
          "unit": "feet",
          "condition": "MH"
        },
        {
          "field": "min_lot_depth",
          "value": 80,
          "unit": "feet",
          "condition": "MH"
        },
        {
          "field": "park_parcel_min",
          "value": 5,
          "unit": "acres",
          "condition": "HUD Code manufactured home park or mobile home park, by definition"
        },
        {
          "field": "park_parcel_max",
          "value": 25,
          "unit": "acres",
          "condition": "HUD Code manufactured home park or mobile home park, by definition"
        }
      ],
      "evidence": "Sec. 3.10: 'Minimum Lot Area 3,000 SF per unit Minimum Lot Width 35' Minimum Lot Depth 80''. Sec. 5.06(a)(iv): parking space '9 x 18 ... not to be included in the lot size'.",
      "limitations": "The 5–25 acre park size comes from definitions, not the district table."
    },
    {
      "id": "b43f0cfb46b48faf14d51de66f397e95459fe91e53c404d3bd1eb3fd4fe2db9f",
      "source_sufficient": true,
      "rule_kind": "conditional_or_referential",
      "answer": "MUNR maximum lot coverage is 50%. The full 50% is available only if 50% of the parking for the multifamily (MF) portion is provided in attached, enclosed garages. If a smaller share of MF parking is in such garages, maximum coverage drops to match that percentage.",
      "citation": "App. A Sec. 3.13",
      "numeric_facts": [
        {
          "field": "max_lot_coverage",
          "value": 50,
          "unit": "percent",
          "condition": "if 50% of MF parking is in attached, enclosed garages; reduced to match the garage percentage otherwise"
        }
      ],
      "evidence": "Sec. 3.13: 'Maximum Lot Coverage 50% if 50% of parking for MF portion is provided by attached, enclosed garages. 50% maximum. Lower lot coverage to match percentage of attached, enclosed garages.'",
      "limitations": "The text does not say how the reduction is calculated (for example, whether 30% garage parking means 30% coverage), how coverage applies to a development with no MF portion, or whether accessory buildings count. Sec. 3.09 says multifamily development permitted in other districts follows MF2 standards (40%); its interaction with this provision is unclear."
    },
    {
      "id": "e54650f5fcdf87d0131d2cc9cbaba1e60818f8d5bbb13d0975317d486d380282",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "SF2 maximum lot coverage is 50%, counting both main and accessory buildings.\n\nRelated rules:\n- Accessory structures, including garages, may occupy no more than 50% of the minimum required rear yard (Sec. 5.07(d)(i)).\n- Qualifying lots in the Infill Overlay (platted or conveyed before 1980 and inside Exhibit A) may reach 80% coverage (Sec. 3.25(d)(ii)).",
      "citation": "App. A Sec. 3.05; Secs. 5.07(d)(i), 3.25(d)(ii)",
      "numeric_facts": [
        {
          "field": "max_lot_coverage",
          "value": 50,
          "unit": "percent",
          "condition": "main and accessory buildings"
        },
        {
          "field": "accessory_rear_yard_max_occupancy",
          "value": 50,
          "unit": "percent of required rear yard",
          "condition": "accessory structures"
        },
        {
          "field": "max_lot_coverage",
          "value": 80,
          "unit": "percent",
          "condition": "qualifying Infill Overlay property"
        }
      ],
      "evidence": "Sec. 3.05 SF2: 'Maximum Lot Coverage 50% by main and accessory buildings'. Sec. 3.25(d)(ii): 'Maximum lot coverage is eighty (80) percent.'",
      "limitations": "The Exhibit A boundary of the infill overlay is not provided."
    },
    {
      "id": "1c7468a8201df6f8857e447d9778b76091b802ff116faa5954739ee80468fff1",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "SF3 minimum yards:\n- Front yard: 30 ft.\n- Side yard: 10 ft, or 15 ft on corner lots adjacent to a street.\n- Rear yard: 25 ft.\n\nRelated rules:\n- On interior (non-corner) lots, a side-entry garage door must be at least 25 ft from the side property line.\n- On corner and double-frontage lots, front yards apply on both streets unless the plat designates a side or rear building line (Sec. 7.06).\n- Lots on final plats approved before May 21, 2018 keep the prior side-yard rules (Sec. 2.01(b)(v)-(vi)).\n- Accessory structures:\n  - Front: no closer to the street than the main building or the front setback, whichever is greater.\n  - Rear: 3 ft, or 20 ft for rear-access garages.\n  - Side: 5 ft if behind the main building; otherwise the main-building setback.\n- Qualifying Infill Overlay lots use different rules: front yard within 5 ft of the average of nearby structures, and side yards at least 10% of lot width.",
      "citation": "App. A Sec. 3.06; Secs. 2.01(b)(v)-(vi), 5.07(f)(i), 7.06, 3.25(d)",
      "numeric_facts": [
        {
          "field": "front_setback_min",
          "value": 30,
          "unit": "feet",
          "condition": "SF3"
        },
        {
          "field": "side_setback_min",
          "value": 10,
          "unit": "feet",
          "condition": "interior side"
        },
        {
          "field": "side_setback_min",
          "value": 15,
          "unit": "feet",
          "condition": "corner lot side adjacent to a street"
        },
        {
          "field": "rear_setback_min",
          "value": 25,
          "unit": "feet",
          "condition": "SF3"
        },
        {
          "field": "side_entry_garage_door_to_side_line",
          "value": 25,
          "unit": "feet",
          "condition": "side-entry garage on a non-corner lot"
        }
      ],
      "evidence": "Sec. 3.06 SF3: 'Minimum Front Yard 30' Minimum Side Yard 10'; 15' on corner lots adjacent to a street Minimum Rear Yard 25''.",
      "limitations": "The pre-2018 side-yard standards are not included in this source. The Exhibit A infill overlay boundary is not provided."
    },
    {
      "id": "9265904fe02f3717286d55df023b698b060b57919303035858a55cd3bca90b99",
      "source_sufficient": false,
      "rule_kind": "unresolved",
      "answer": "Cannot be determined from the provided excerpts. The Land Use Chart (Sec. 5.1) is truncated after the agricultural rows, so no row for accessory dwelling units, guest quarters or caretakers quarters is shown with district permissions. The only related text is a definition: Sec. 5.2 (accessory uses), item 8, 'Caretakers Quarters, Domestic or Security Unit,' meaning an independent, self-contained dwelling unit on the same lot as the principal use for a property manager or security personnel. That excerpt gives no district permissions or standards for it.",
      "citation": null,
      "numeric_facts": [],
      "evidence": "Sec. 5.2 accessory uses, item 8: 'Caretakers Quarters, Domestic or Security Unit means an independent, self-contained dwelling unit located on the same lot as the principal use or structure...' Sec. 5.1 Figure 5-1: 'A blank square means that the use is not allowed...', but the chart rows for accessory or residential uses are not in the excerpt. Sec. 5.6.A: 'Uses not specifically listed in this Chapter are prohibited.'",
      "limitations": "The document is not complete. Use chart rows, other Sec. 5.2 provisions and Article 7 are missing. Without the chart rows, it cannot be established whether ADUs or caretaker units are permitted, need an SUP, or are prohibited in any district. The accessory building standards in Sec. 2.5.C apply to accessory structures generally, not specifically to dwelling units."
    },
    {
      "id": "cd0143f9ec0c7d8754488e9622dee460e22729d1cf67037654d9c7ac8e259a66",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "Main structure setbacks in CC (Figure 4-3) are front yard 25 ft, side yard 10 ft and rear yard 10 ft. Where a nonresidential use is adjacent to single family, the side and rear setbacks are doubled and 10 ft of landscaping with screening is required. Where it is adjacent to multifamily, they are doubled with 5 ft of landscaping with screening. Height is also limited by a 3:1 slope from a residential lot line. Detached accessory buildings follow Sec. 2.5.C.2.c: no closer to the front than the main building or the district front setback; side 3 ft when behind the main building, or the main-building setback when in the side yard; rear 3 ft (5 ft for a rear-access garage or carport); primary-structure setbacks apply when the accessory structure is over 15 ft tall; none in easements; and 5 ft separation from other structures except carports.",
      "citation": "Wylie Zoning Ordinance (App. B) Sec. 4.1.C.3, Figure 4-3; Sec. 2.5.C.2.c",
      "numeric_facts": [
        {
          "field": "front_setback",
          "value": 25,
          "unit": "ft",
          "condition": "main structure"
        },
        {
          "field": "side_setback",
          "value": 10,
          "unit": "ft",
          "condition": "main structure"
        },
        {
          "field": "rear_setback",
          "value": 10,
          "unit": "ft",
          "condition": "main structure"
        },
        {
          "field": "side_rear_setback_multiplier",
          "value": 2,
          "unit": "x",
          "condition": "nonresidential use adjacent to single family or multifamily"
        },
        {
          "field": "landscape_buffer_width",
          "value": 10,
          "unit": "ft",
          "condition": "adjacent to single family, with screening"
        },
        {
          "field": "landscape_buffer_width",
          "value": 5,
          "unit": "ft",
          "condition": "adjacent to multifamily, with screening"
        },
        {
          "field": "accessory_side_setback",
          "value": 3,
          "unit": "ft",
          "condition": "detached accessory building behind main building, height <=15 ft"
        },
        {
          "field": "accessory_rear_setback",
          "value": 3,
          "unit": "ft",
          "condition": "detached accessory building, height <=15 ft"
        },
        {
          "field": "accessory_rear_setback",
          "value": 5,
          "unit": "ft",
          "condition": "garage or carport with rear access"
        }
      ],
      "evidence": "Figure 4-3 Commercial Corridor District (CC): 'Front Yard Setback (feet) 25; Side Yard Setback (feet) 10; Rear Yard Setback (feet) 10''; 'Nonresidential Use Adjacent to Single Family: Double Side and Rear Setback - 10' required landscaping w/screening'; 'Adjacent to Multifamily: Double Side and Rear Setback - 5' required landscaping w/screening'. Sec. 2.5.C.2.c(1)-(6) sets the accessory setbacks.",
      "limitations": "Sec. 4.1.C.4 refers to Article 7 (General Development Regulations), which is not provided and may contain setback exceptions, projections or thoroughfare-based rules. Sec. 4.3 Figure 4-8 requires a landscaped front buffer of at least 10 ft over at least 50% of the front yard. The excerpt is incomplete."
    },
    {
      "id": "8c83f41b78b4e1aa1002630875f6c9e55aa93940bd6da21b9ff1e853160839f5",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "In CR (Figure 4-2), the main structure may be at most 36 ft and 2 stories. Residential proximity is limited by a 3:1 slope from a residential lot line. Detached accessory structures may be at most 15 ft on lots under 1 acre and 20 ft on lots of 1 acre or more (Sec. 2.5.C.2.f).",
      "citation": "Wylie Zoning Ordinance (App. B) Sec. 4.1.B.3, Figure 4-2; Sec. 2.5.C.2.f",
      "numeric_facts": [
        {
          "field": "max_height",
          "value": 36,
          "unit": "ft",
          "condition": "main structure"
        },
        {
          "field": "max_stories",
          "value": 2,
          "unit": "stories",
          "condition": "main structure"
        },
        {
          "field": "residential_proximity_slope",
          "value": 3,
          "unit": "ratio (3:1)",
          "condition": "slope measured from residential lot line"
        },
        {
          "field": "accessory_max_height",
          "value": 15,
          "unit": "ft",
          "condition": "lot less than 1 acre"
        },
        {
          "field": "accessory_max_height",
          "value": 20,
          "unit": "ft",
          "condition": "lot 1 acre or greater"
        }
      ],
      "evidence": "Figure 4-2 Community Retail District (CR): 'Height of Main Structure (feet) 36; Number of Stories 2; Residential Proximity 3:1 slope from residential lot line'. Sec. 2.5.C.2.f(1): 'not more than fifteen (15) feet on lots less than one acre and not more than twenty (20) feet on lots one acre or greater.'",
      "limitations": "Article 7, which is not provided, may contain height measurement rules or exceptions such as parapets or mechanical equipment. The excerpt does not explain how the 3:1 slope is applied geometrically."
    },
    {
      "id": "2f71a0c78196eb00fd4b3b0080828dec28274cf5048137103a08002b0786ae91",
      "source_sufficient": true,
      "rule_kind": "explicit_standard",
      "answer": "In SF-20/26 (Figure 3-3), the main structure may be at most 40 ft and accessory structures at most 15 ft. Sec. 2.5.C.2.f separately limits detached accessory structures to 15 ft on lots under 1 acre and 20 ft on lots of 1 acre or more. That creates an unreconciled difference with the 15 ft district figure for lots of 1 acre or more. Accessory structures over 15 ft must meet primary-structure side setbacks (Sec. 2.5.C.2.c(4)).",
      "citation": "Wylie Zoning Ordinance (App. B) Sec. 3.2.A.3, Figure 3-3; Sec. 2.5.C.2.f",
      "numeric_facts": [
        {
          "field": "max_height",
          "value": 40,
          "unit": "ft",
          "condition": "main structure"
        },
        {
          "field": "accessory_max_height",
          "value": 15,
          "unit": "ft",
          "condition": "per Figure 3-3; also Sec. 2.5.C.2.f for lots less than 1 acre"
        },
        {
          "field": "accessory_max_height",
          "value": 20,
          "unit": "ft",
          "condition": "Sec. 2.5.C.2.f for lots 1 acre or greater; conflicts with Figure 3-3"
        }
      ],
      "evidence": "Figure 3-3 Single Family 20 District (SF-20/26), Height of Structures: 'Main Structure (feet) 40; Accessory Structure (feet) 15'. Sec. 2.5.C.2.f(1): 'fifteen (15) feet on lots less than one acre and not more than twenty (20) feet on lots one acre or greater.'",
      "limitations": "The main-structure height is clear. The accessory height for lots of 1 acre or more is ambiguous because the district table and the general rule differ, and the excerpt contains no conflict rule. Article 7 and Sec. 3.4, which are not provided, may contain height measurement rules or exceptions."
    }
  ],
  "adjudication": {
    "adjudicated_at": "2026-10-19",
    "status": "complete",
    "scope": "V2 error findings only; original blind answers remain frozen. No v1 assessment used. Does not certify current adopted law; source-vintage review. Royse City handled separately by root.",
    "counts": {
      "confirmed_error": 16,
      "unresolved": 1,
      "false_positive": 3
    },
    "findings": [
      {
        "id": "a09bb946038ced13b25139d1c8798016e2c7d7c9c10d66ec6d01f140d582f3ed",
        "municipality_slug": "apex-nc",
        "district_code": "HDSF",
        "topic": "lot_coverage",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "high",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "high",
        "operative_quote": "HDSF / Single Family: Max. Density (Gross Units per Acre) = 8.",
        "source_url": "https://apexnc.org/DocumentCenter/View/551",
        "source_file": ".tmp/accuracy/source-bodies/apex-nc/cff9323ba0dd3e47.pdf",
        "source_pdf_pages": [
          2
        ],
        "source_sha256": "4c68eb89136670b51dc988b3b9bd4e5e6fb5667e2c1a7b27565b44281600fabb",
        "reason": "Visually inspected table row and column grid. The published express claim of no listed single-family density cap is false, not merely an omitted optional detail. All 65% coverage figures agree.",
        "proposed_replacement": "Maximum built-upon area **65 percent** for single family, duplexes, townhouses, and townhouses (detached). Maximum density: single family and duplexes **8 gross units per acre**; townhouses (detached) **7 gross units per acre** (Sec. 4.4.1.J).",
        "proposed_citation": "Sec. 5.1.1 chart (HDSF rows)",
        "publication_changed": false
      },
      {
        "id": "4cc4d85e90441d1af40b5f5d1be57b465dd96f16722553e7b22510e1b80848af",
        "municipality_slug": "apex-nc",
        "district_code": "LD",
        "topic": "lot_size",
        "decision": "confirmed_error",
        "error_class": "transcription",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "transcription",
        "original_severity": "medium",
        "operative_quote": "Table heading: Average Lot Size. LD / Single family: 10,000 square feet; Minimum Lot Width (Feet): 50; Additional Regulations: Sec. 5.2.3.B.",
        "source_url": "https://apexnc.org/DocumentCenter/View/551",
        "source_file": ".tmp/accuracy/source-bodies/apex-nc/cff9323ba0dd3e47.pdf",
        "source_pdf_pages": [
          1
        ],
        "source_sha256": "4c68eb89136670b51dc988b3b9bd4e5e6fb5667e2c1a7b27565b44281600fabb",
        "reason": "Visually inspected header and LD single-family row. Averaged lot-size standard was stated as a per-lot minimum. The table itself does not justify dropping average.",
        "proposed_replacement": "Single family: required **average lot size 10,000 square feet** and minimum lot width **50 feet**. Apply the additional lot-size provisions in Sec. 5.2.3.B.",
        "proposed_citation": "Sec. 5.1.1 chart (LD single-family row); Sec. 5.2.3.B",
        "publication_changed": false
      },
      {
        "id": "2b508f635ee2ffe5e048011fa0272257c698c31134ee6e263780be999a61e428",
        "municipality_slug": "fate-tx",
        "district_code": "A",
        "topic": "lot_coverage",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "Lot Coverage Percentage / All buildings on the lot (max): 20%.",
        "source_url": "https://www.fatetx.gov/DocumentCenter/View/4319/Article-III_Zoning-Districts_Final_20240701",
        "source_file": "sources/fate-tx/doc-4319.pdf",
        "source_pdf_pages": [
          5
        ],
        "source_sha256": "4b6da7d556edd57ef7d0acda1525c339398f8e2daa8df161a3f9034a50163ab2",
        "reason": "Visually inspected Fig.3.2-2. Published lot-coverage answer exposes internal facts.md/snapshot paths and withholds the explicit usable cap; it also attributes an open-space standard to a table that has no such row. This is answer incompleteness, not a wrong numeric extraction.",
        "proposed_replacement": "Maximum lot coverage for **all buildings on the lot is 20 percent** (Figure 3.2-2). Other applicable landscaping, parking, screening and drainage requirements must also be met.",
        "proposed_citation": "Article III §3.2.2, Figure 3.2-2",
        "publication_changed": false
      },
      {
        "id": "54821031d086711b33786480143cb808ff6edd36a36d3c1e9ed989b3fac72d74",
        "municipality_slug": "fate-tx",
        "district_code": "IND",
        "topic": "setbacks",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "Front: On Freeway, Freeway Frontage Road, or Arterial Roadway (min) 20; On All Other Streets (min) 20; Side: (min) 40; Rear: (min) 40.",
        "source_url": "https://www.fatetx.gov/DocumentCenter/View/4319/Article-III_Zoning-Districts_Final_20240701",
        "source_file": "sources/fate-tx/doc-4319.pdf",
        "source_pdf_pages": [
          27
        ],
        "source_sha256": "4b6da7d556edd57ef7d0acda1525c339398f8e2daa8df161a3f9034a50163ab2",
        "reason": "Visually inspected Fig.3.3-8. Generic internal-file referral omits the published topic's four readily stated requirements. No separate allegation is made that every generic site-planning caution is false.",
        "proposed_replacement": "IND minimum setbacks: **front 20 feet** on freeway, freeway frontage road, arterial roadway, and other streets; **side 40 feet**; **rear 40 feet**. Figure 3.3-8 lists no maximum front setback.",
        "proposed_citation": "Article III §3.3.5, Figure 3.3-8",
        "publication_changed": false
      },
      {
        "id": "7dddceb8ee2150db48ca423f708f7e7cd6151141da170e9074721616fca14591",
        "municipality_slug": "fate-tx",
        "district_code": "OTC",
        "topic": "height",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "Stories (min): 2, except for single-family detached residential. Stories (max): 4 or 55'; 5+ with SUP.",
        "source_url": "https://www.fatetx.gov/DocumentCenter/View/4319/Article-III_Zoning-Districts_Final_20240701",
        "source_file": "sources/fate-tx/doc-4319.pdf",
        "source_pdf_pages": [
          46
        ],
        "source_sha256": "4b6da7d556edd57ef7d0acda1525c339398f8e2daa8df161a3f9034a50163ab2",
        "reason": "Visually inspected Fig.3.5-14. Published internal-file referral gives no operative height figures or exception although the table is readable. Preserve the table's literal or rather than inventing which limit controls.",
        "proposed_replacement": "OTC height: **minimum 2 stories**, except single-family detached residential. The table lists **maximum 4 stories or 55 feet**, with **5 or more stories requiring an SUP**.",
        "proposed_citation": "Article III §3.5.7, Figure 3.5-14",
        "publication_changed": false
      },
      {
        "id": "703caee380ce69ce0811ee404b5932e37bbc7aa410e85d300faac3a036751876",
        "municipality_slug": "fate-tx",
        "district_code": "PD",
        "topic": "lot_size",
        "decision": "confirmed_error",
        "error_class": "citation",
        "severity": "low",
        "original_assessment_status": "error",
        "original_error_class": "citation",
        "original_severity": "low",
        "operative_quote": "The request for Planned Development District zoning is considered a zoning change ... Section 2.5 shall apply. ... Planned Developments shall be 10 acres minimum.",
        "source_url": "https://www.fatetx.gov/DocumentCenter/View/4319/Article-III_Zoning-Districts_Final_20240701",
        "source_file": "sources/fate-tx/doc-4319.pdf",
        "source_pdf_pages": [
          49
        ],
        "source_sha256": "4b6da7d556edd57ef7d0acda1525c339398f8e2daa8df161a3f9034a50163ab2",
        "reason": "Visually inspected §3.5.8(B). The 10-acre result is correct, but the published claim that it came from a dimensional table area cell is false; it is enumerated prose. Internal file paths are not useful public citations.",
        "proposed_replacement": "Planned Development requires the applicable concept-plan and zoning-change review procedures. A PD must be **at least 10 acres**; standards are set through the approved PD.",
        "proposed_citation": "Article III §§3.5.2(1), 3.5.8(B)(1); Article II §2.5",
        "publication_changed": false
      },
      {
        "id": "af5a5736ff2a3d2fb71a71ba43e2022cbb5fcbf7e95f6e79a212565233a57695",
        "municipality_slug": "forney-tx",
        "district_code": "2F",
        "topic": "lot_coverage",
        "decision": "confirmed_error",
        "error_class": "applicability",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "Maximum Lot Coverage for Two-Family/Duplex Homes - forty-five percent (45%) by main buildings and accessory buildings. Single-family lots and detached dwellings ... shall conform to ... SF-8.",
        "source_url": "https://www.forneytx.gov/DocumentCenter/View/3790/Zoning-Ordinance-2026-2",
        "source_file": ".tmp/accuracy/source-bodies/forney-tx/ec0647f623730dd0.pdf",
        "source_pdf_pages": [
          63,
          74
        ],
        "source_sha256": "e64b5653af24dd76279b80906c4d5d624479ddc534a0aa296f831ff84ef9b497",
        "reason": "Read §§22.4.C,22.5.A and19.4.C. The 45% is not universal within2F; single-family follows40%. Reclassified from omission to applicability because a use-specific standard was applied to the whole district.",
        "proposed_replacement": "For two-family/duplex homes in 2F, maximum lot coverage is **45 percent**, including main and accessory buildings (§22.4.C). Single-family lots and detached dwellings follow SF-8 standards (§22.5.A), including **40 percent** maximum coverage (§19.4.C).",
        "proposed_citation": "§§22.4.C, 22.5.A, 19.4.C",
        "publication_changed": false
      },
      {
        "id": "f0951aa27cd444e4b860b5f81232d3175f4b9a51c2d80e89a3981d1b6a2bba2b",
        "municipality_slug": "forney-tx",
        "district_code": "CBT",
        "topic": "special_land_uses",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "For existing structures/uses ... Any existing parking, or lack of same ... shall be considered a conforming parking arrangement. ... For new structures and uses - as required in the base zoning district. ... Open storage is prohibited in the CBT district.",
        "source_url": "https://www.forneytx.gov/DocumentCenter/View/3790/Zoning-Ordinance-2026-2",
        "source_file": ".tmp/accuracy/source-bodies/forney-tx/ec0647f623730dd0.pdf",
        "source_pdf_pages": [
          125,
          126,
          128
        ],
        "source_sha256": "e64b5653af24dd76279b80906c4d5d624479ddc534a0aa296f831ff84ef9b497",
        "reason": "Read complete operative parking clauses, site-plan requirements and open-storage prohibition. Published all-parking base-district claim conflicts with express existing-structure protection. Architecture-only characterization also omits operational conditions.",
        "proposed_replacement": "CBT generally carries the base district's permitted/conditional uses and dimensional standards. Existing structures and uses have protected existing parking arrangements under §34c.4.E(1); additions, significant use expansion and reconstruction have stated conditions. New structures and uses follow base-district parking. Open storage is prohibited. Site redevelopment/new structures require approved site plans, and applicable work requires facade approval; development standards are established on the approved site plan.",
        "proposed_citation": "§§34c.2, 34c.4.E, 34c.5",
        "publication_changed": false
      },
      {
        "id": "704e7a2150cbb91b9b49e3138895e9b08f5722935d359180ffee3e884ceaaec0",
        "municipality_slug": "gallatin-tn",
        "district_code": "CS",
        "topic": "setbacks",
        "decision": "unresolved",
        "error_class": null,
        "severity": null,
        "original_assessment_status": "error",
        "original_error_class": "applicability",
        "original_severity": "medium",
        "operative_quote": "Greater yard and building setbacks may be required when the CS zoned properties are located adjacent to a separate zoning district ... Section13.03. Setbacks from roadways scheduled for widening ... projected future right-of-way line.",
        "source_url": "https://gallatintn.gov/DocumentCenter/View/1120",
        "source_file": ".tmp/accuracy/source-bodies/gallatin-tn/9cccd3f8b3c9a855.pdf",
        "source_pdf_pages": [
          8
        ],
        "source_sha256": "08b23cc78538848f2b9897c9ea881468258f60d5e62e77a8802e03a157ab91f3",
        "reason": "The cited CS provision supports10/10/20ft but contains no corner-lot sentence. Absence in this section alone does not prove no general corner rule, and saying buffers can apply next to residential districts does not literally deny other adjacencies. Do not count as confirmed error without completing general provisions. Separately, current official page labels this code previous and applicable only to EPD; current-law applicability requires substantive review.",
        "proposed_replacement": "Pending currency review: do not publish a generic current CS verdict. For an actually applicable legacy CS rule, state10ftfront,10ftside,20ftrear, separate-district bufferyard qualification and future-right-of-way measurement; include corner rule only after a controlling citation is established.",
        "proposed_citation": "Previous code §08.02.030; current-code/EPD applicability must be resolved",
        "publication_changed": false
      },
      {
        "id": "05e4a531d7254d566b048458f0513f513da3281d091d004c4b3f2cc30e299dd5",
        "municipality_slug": "hendersonville-tn",
        "district_code": "ER",
        "topic": "setbacks",
        "decision": "false_positive",
        "error_class": null,
        "severity": null,
        "original_assessment_status": "error",
        "original_error_class": "applicability",
        "original_severity": "low",
        "operative_quote": "ER cells: front40; side street35; side20; rear35. Footnotes2,3,5,6 attach to other cells, not ER.",
        "source_url": "https://www.hvilletn.org/DocumentCenter/View/439/2025-Zoning-Ordinance-2025-19-PDF",
        "source_file": ".tmp/accuracy/source-bodies/hendersonville-tn/7a329742bb4abdce.pdf",
        "source_pdf_pages": [
          87,
          88
        ],
        "source_sha256": "88e06cf9b3c31823b8fa3f73b81238eed1504bfd00f214c1c51730dbc291c9fb",
        "reason": "Visually inspected ER column and note markers. All four published base values match. The generic sentence says table notes can modify listed conditions; it does not actually assign a different ER value or affirm those notes attach to ER. Ambiguous boilerplate merits clarification, but an inferred application is insufficient for a confirmed factual error.",
        "proposed_replacement": "Optional clarity edit: Base yards in ER: front **40 feet**, side-street **35 feet**, side **20 feet**, rear **35 feet** (Chapter6.3,Table4). Do not import footnotes attached only to other districts.",
        "proposed_citation": "Chapter6.3,Table4",
        "publication_changed": false
      },
      {
        "id": "3c8d9c7af20da296f5026349f7c867dafeb92dd2315837fc9fc7c3ce9c7d113f",
        "municipality_slug": "holly-springs-nc",
        "district_code": "NMX",
        "topic": "lot_size",
        "decision": "false_positive",
        "error_class": null,
        "severity": null,
        "original_assessment_status": "error",
        "original_error_class": "transcription",
        "original_severity": "low",
        "operative_quote": "NMX Minimum Development Area (acres) (N1):0. N1:Applicable to sites that are greater than5acres.",
        "source_url": "https://www.hollyspringsnc.gov/DocumentCenter/View/37679/Section-2-Districts",
        "source_file": ".tmp/accuracy/source-bodies/holly-springs-nc/159408aec3190b53.pdf",
        "source_pdf_pages": [
          9,
          10
        ],
        "source_sha256": "6363914822ebfda13aa2d0e2e97a1b7b583aa88f1c78e6a51ee5a03d2be31bdd",
        "reason": "Visually inspected table and N1. Published no minimum below5acres is true because the row applies only above5acres. The source also gives zero above5acres. The assessor inferred an unstated positive requirement above5; the product never states one. Incomplete clarity is not a proven false requirement.",
        "proposed_replacement": "Optional clarity edit: NMX minimum development area is **0 acres** in Table2.2.2-A; NoteN1 applies that row to sites greater than5acres. Retain the separately correct frontage and floor-area figures.",
        "proposed_citation": "Table2.2.2-A andNoteN1",
        "publication_changed": false
      },
      {
        "id": "174aa12f613e108953a4d73669774748688949a24ae044ad235460dd5cd98482",
        "municipality_slug": "lebanon-tn",
        "district_code": "RMH",
        "topic": "lot_coverage",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "Mobile home stands shall not occupy an area in excess of twenty-five (25) percent of the respective lot area. The total area occupied by the mobile home and its accessory structures shall not exceed fifty (50) percent of the respective space area.",
        "source_url": "https://www.lebanontn.org/DocumentCenter/View/6419",
        "source_file": ".tmp/accuracy/source-bodies/lebanon-tn/6f2e3a71e7e71c85.pdf",
        "source_pdf_pages": [
          17
        ],
        "source_sha256": "17473dbeb455a77c0df193a7303674959ac16e9ef3aa7609685cfdf0df2c6cc0",
        "reason": "Read RMH§13 park-specific standards. First clause is narrowly about the lot-development table, but the following assertion that bulk is controlled through other means instead omits explicit coverage caps for a central allowed use. Preserve park applicability rather than impose these caps on allRMHdevelopment.",
        "proposed_replacement": "The general RMH lot-development table does not list a districtwide coverage cap. **Mobile-home parks have specific caps:** mobile-home stands may occupy no more than **25 percent** of their respective lot area, and a mobile home plus accessory structures may occupy no more than **50 percent** of the respective space area (§13,SpacingofMobileHomesandSiteCoverage).",
        "proposed_citation": "§14.303RMH,§13,SpacingofMobileHomesandSiteCoverage",
        "publication_changed": false
      },
      {
        "id": "afb0f4420c6e54623988ae62c00fd429d2beaf29cb0991b995a479c66f830851",
        "municipality_slug": "lebanon-tn",
        "district_code": "RPI",
        "topic": "permitted_uses",
        "decision": "confirmed_error",
        "error_class": "transcription",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "transcription",
        "original_severity": "low",
        "operative_quote": "the total area of residential parcels cannot exceed85%of the total area of all development parcels in each polygon of this zoning district.",
        "source_url": "https://www.lebanontn.org/DocumentCenter/View/6391",
        "source_file": ".tmp/accuracy/source-bodies/lebanon-tn/3ddfc9670170cdbf.pdf",
        "source_pdf_pages": [
          1
        ],
        "source_sha256": "9b76caced6a3fced50dd16fc91f769a0961d322f0f8f5456af18528e230f83d9",
        "reason": "Read RPI§4. Published denominator is all polygon land rather than development parcels. This can overstate residential allocation if public rights-of-way or other excluded land are in the polygon; medium severity rather than purely cosmetic low.",
        "proposed_replacement": "Retain the verified use list and qualifications. Replace the85%sentence with: Residential parcels cannot exceed **85 percent of the total area of all development parcels in each RPI polygon**.",
        "proposed_citation": "RPI§4LandUses",
        "publication_changed": false
      },
      {
        "id": "bde88fba92c760f438c939a20cc24336b36591328f5c91e59eac626d5397ed27",
        "municipality_slug": "orion-township",
        "district_code": "BIZ",
        "topic": "permitted_uses",
        "decision": "confirmed_error",
        "error_class": "applicability",
        "severity": "high",
        "original_assessment_status": "error",
        "original_error_class": "applicability",
        "original_severity": "high",
        "operative_quote": "The requirements of this Section shall be applied in addition to the requirements of the applicable zoning districts and other applicable sections ... Where conflicts exist ... this Section shall supersede.",
        "source_url": "https://cms9files.revize.com/oriontwp/Zoning%20Ordinance/section%2034%20Final.pdf",
        "source_file": ".tmp/accuracy/source-bodies/orion-township/93bd158f5dce9f12.pdf",
        "source_pdf_pages": [
          1
        ],
        "source_sha256": "c95884b7aa8bd0d81d47bcf7094ceb46bbb3dace625481dc09b9eb98531986be",
        "reason": "Section 34.01A expressly incorporates corresponding district standards. The published direction not to apply general district tables reverses this requirement.",
        "proposed_replacement": "BIZ standards apply in addition to the applicable zoning district and other ordinance requirements. The Planning Commission determines the corresponding district based on the permitted uses; BIZ provisions control conflicts. Apply permitted/prohibited use Tables 34-1 and 34-2 and the conditions in Section 34.01B-D.",
        "proposed_citation": "Article XXXIV, Section 34.01A-D",
        "publication_changed": false
      },
      {
        "id": "780db8cd7418126b821fc0725001f7a7a3783c7cea56783ad9c4737b8b40703e",
        "municipality_slug": "orion-township",
        "district_code": "GB",
        "topic": "permitted_uses",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "Outdoor display and sales shall not exceed ten percent (10%) of the building or one thousand (1,000) square feet, whichever is less.",
        "source_url": "https://cms9files.revize.com/oriontwp/Zoning%20Ordinance/section%2014%20Final.pdf",
        "source_file": ".tmp/accuracy/source-bodies/orion-township/ea35233ffca8ccfd.pdf",
        "source_pdf_pages": [
          4
        ],
        "source_sha256": "6f1070261911288a7d9857f65b87aa7f8ebe4d55a238532af15038f585cb7bae",
        "reason": "Published 1,000-square-foot allowance omits the smaller building-relative limit.",
        "proposed_replacement": "Replace the outdoor-display phrase with: outdoor display and sales limited to 10 percent of the building or 1,000 square feet, whichever is less, subject to Section 14.02G, including administrative review and permitting.",
        "proposed_citation": "Section 14.02G",
        "publication_changed": false
      },
      {
        "id": "b0bb98aa8263c566e4c72c02f64e86a6533df96866f341a6c55ab49277f54a7e",
        "municipality_slug": "orion-township",
        "district_code": "LI",
        "topic": "permitted_uses",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "low",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "low",
        "operative_quote": "Outdoor patio P E. Restaurant uses may also include outdoor patio subject to administrative review by the Building Department.",
        "source_url": "https://cms9files.revize.com/oriontwp/Zoning%20Ordinance/section%2016%20Final.pdf",
        "source_file": ".tmp/accuracy/source-bodies/orion-township/41bff0702ba7b300.pdf",
        "source_pdf_pages": [
          2,
          3
        ],
        "source_sha256": "eb7eba1710c29e2da3e847ca5c9d065997cf3b24521dae9a2aca398d28ead71f",
        "reason": "The published detailed use enumeration omits outdoor patios. This is accessory to restaurant uses and does not remove restaurant special-use approval.",
        "proposed_replacement": "Add: Outdoor patios accessory to restaurant uses are allowed subject to the administrative review in Section 16.02E; this does not remove the special-use approval required for the restaurant.",
        "proposed_citation": "Sections 16.01 and 16.02E",
        "publication_changed": false
      },
      {
        "id": "3b5ce53edeecef02a99558de28b814a253b0c5914d3af018df7f6f2923067aca",
        "municipality_slug": "rockwall-tx",
        "district_code": "DT",
        "topic": "height",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "Minimum building height: 2 stories. Maximum building height: 4 stories [square/other blocks]; 2 stories [blocks facing single-family]. Maximum building height shall be two (2) stories when within 200 feet of single-family zoned property.",
        "source_url": "https://www.rockwall.com/pz/Planning/Documents/Unified%20Development%20Code%20(UDC).pdf",
        "source_file": "sources/rockwall-tx/udc.pdf",
        "source_pdf_pages": [
          72,
          73
        ],
        "source_sha256": "6254fbc35492bb831cc35fef5df22e76d7afd0b0c3b3ecef2f9019523f181703",
        "reason": "Visually inspected Table 1 and read fourth-floor setback and waiver clauses. Internal draft referral is not an operative height answer.",
        "proposed_replacement": "DT buildings require at least 2 stories. Maximum height is 4 stories on blocks facing the square and other blocks, and 2 stories on blocks facing single-family; the maximum is also 2 stories within 200 feet of single-family-zoned property. Buildings above 3 stories must set the fourth floor back at least 8 feet behind the first-three-story street-facing building face. Feature-building height increases require a minor waiver at site-plan review; other added height and changes to the fourth-floor setback require a major waiver.",
        "proposed_citation": "Article 05, Section 04.07, Table 1 notes 1 and 3; Section 04.07D.2.b(1)",
        "publication_changed": false
      },
      {
        "id": "e440b6d8a7ff46a8dabd34a54d6fb9e35b70f3e541aca53912d7c913645edb33",
        "municipality_slug": "rockwall-tx",
        "district_code": "SRO",
        "topic": "permitted_uses",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "Unless otherwise addressed in this section, all other standards and requirements of the underlying zoning district shall govern. ... Special requests shall not include any request to change the land use of a property.",
        "source_url": "https://www.rockwall.com/pz/Planning/Documents/Unified%20Development%20Code%20(UDC).pdf",
        "source_file": "sources/rockwall-tx/udc.pdf",
        "source_pdf_pages": [
          83,
          94
        ],
        "source_sha256": "6254fbc35492bb831cc35fef5df22e76d7afd0b0c3b3ecef2f9019523f181703",
        "reason": "SRO is an overlay; the published internal use-table referral omits the operative base-district rule and limitation on special requests.",
        "proposed_replacement": "SRO is an overlay. Apply the underlying zoning district land-use permissions unless the overlay addresses the requirement; SRO governs conflicts. A neighborhood-preservation special request under Section 06.05B cannot change a property land use. Determine the underlying district and apply its use schedule and any relevant overlay conditions.",
        "proposed_citation": "Article 05, Sections 06.01 and 06.05B; Article 04 use schedule",
        "publication_changed": false
      },
      {
        "id": "588eee93b72326ef92557432df78cb22e439d2029f63032889bf432972681c56",
        "municipality_slug": "royal-oak",
        "district_code": "1FL",
        "topic": "special_land_uses",
        "decision": "false_positive",
        "error_class": null,
        "severity": null,
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "All special land uses allowed in the One-Family Residential Zone.",
        "source_url": "https://ecode360.com/4478808",
        "source_file": "review/freshness-2026-10-19/royal-oak-ch770.pdf",
        "source_pdf_pages": [
          49,
          51
        ],
        "source_sha256": "edf9a0dc22364296a4640053d5721e57f50caeb9b787a9d6e0c6733fad607cb8",
        "reason": "Section 770-35C lists special uses by incorporating the One-Family zone. The published answer correctly directs readers to that controlling section and states no false permission. The assessor treated the valid public cross-reference as a substantive error.",
        "proposed_replacement": "Optional clarification only: 1FL incorporates the One-Family special land uses through Section 770-35C(1), referring to Section 770-34C.",
        "proposed_citation": "Sections 770-35C(1), 770-34C",
        "publication_changed": false
      },
      {
        "id": "4ffc3b2da75d67ba1b0341ea3a931486a3aae40e12cb1e4ca2923486e5e79bd6",
        "municipality_slug": "spring-hill-tn",
        "district_code": "R-5",
        "topic": "setbacks",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "R-5: Front build-to 20 to 25 feet [single-, two-, three-family]; townhomes 20 feet. Interior side 5 feet [single-family], 5 feet from side lot line or 10 feet between residential buildings [two-/three-family], none [townhomes]. Corner side 10 feet [single-/two-/three-family], none [townhomes]. Reverse corner side 20 feet; rear 25 feet.",
        "source_url": "https://www.springhilltn.org/DocumentCenter/View/10522/Unified-Development-Code--Revised-December-2025",
        "source_file": ".tmp/accuracy/source-bodies/spring-hill-tn/b94e760b96866e2f.pdf",
        "source_pdf_pages": [
          48,
          49,
          111
        ],
        "source_sha256": "197190cf5a6440db0ca8dbbf90345f319f4bee6f94def5f40e1ec5e65e29c67f",
        "reason": "Visually inspected table continuation and townhome footnote. Published setbacks answer lists other bulk facts but omits all operative setbacks. Townhome individual-lot none cannot be construed as no site perimeter requirements.",
        "proposed_replacement": "R-5 setbacks: single-, two- and three-family front build-to range 20 to 25 feet; individual townhome lots front 20 feet. Interior side: single-family 5 feet; two-/three-family 5 feet from side lot line or 10 feet between residential buildings; individual townhome lots none. Corner side: single-/two-/three-family 10 feet; individual townhome lots none. Reverse corner side 20 feet; rear 25 feet. Apply Section 8.3K.1 townhome/multifamily building-separation and perimeter-yard requirements in addition to the individual-lot entries.",
        "proposed_citation": "Table 4-1 (R-5), including continuation and townhome footnote; Section 8.3K.1",
        "publication_changed": false
      }
    ],
    "pending_ids": [],
    "methodology_findings": [
      "Rule-kind kappa is not correctness agreement and does not score numeric facts.",
      "Use only valid predeclared categories and independently resolved paired classifications; exclude unassessed rows and either-side unresolved categories.",
      "Do not infer an error from an unstated implication when the published assertion is literally supported; record optional clarification separately.",
      "Distinguish missing operative answers from wrong numeric values; both can require repair but should not be conflated.",
      "Gallatin sources are on the Previous Zoning Ordinance page. Current source says prior code only applies to EPD; legislative currentness is a separate high-priority issue."
    ],
    "assessments": [
      {
        "id": "a09bb946038ced13b25139d1c8798016e2c7d7c9c10d66ec6d01f140d582f3ed",
        "municipality_slug": "apex-nc",
        "district_code": "HDSF",
        "topic": "lot_coverage",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "high",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "high",
        "operative_quote": "HDSF / Single Family: Max. Density (Gross Units per Acre) = 8.",
        "source_url": "https://apexnc.org/DocumentCenter/View/551",
        "source_file": ".tmp/accuracy/source-bodies/apex-nc/cff9323ba0dd3e47.pdf",
        "source_pdf_pages": [
          2
        ],
        "source_sha256": "4c68eb89136670b51dc988b3b9bd4e5e6fb5667e2c1a7b27565b44281600fabb",
        "reason": "Visually inspected table row and column grid. The published express claim of no listed single-family density cap is false, not merely an omitted optional detail. All 65% coverage figures agree.",
        "proposed_replacement": "Maximum built-upon area **65 percent** for single family, duplexes, townhouses, and townhouses (detached). Maximum density: single family and duplexes **8 gross units per acre**; townhouses (detached) **7 gross units per acre** (Sec. 4.4.1.J).",
        "proposed_citation": "Sec. 5.1.1 chart (HDSF rows)",
        "publication_changed": false,
        "status": "error",
        "evidence": "HDSF / Single Family: Max. Density (Gross Units per Acre) = 8."
      },
      {
        "id": "4cc4d85e90441d1af40b5f5d1be57b465dd96f16722553e7b22510e1b80848af",
        "municipality_slug": "apex-nc",
        "district_code": "LD",
        "topic": "lot_size",
        "decision": "confirmed_error",
        "error_class": "transcription",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "transcription",
        "original_severity": "medium",
        "operative_quote": "Table heading: Average Lot Size. LD / Single family: 10,000 square feet; Minimum Lot Width (Feet): 50; Additional Regulations: Sec. 5.2.3.B.",
        "source_url": "https://apexnc.org/DocumentCenter/View/551",
        "source_file": ".tmp/accuracy/source-bodies/apex-nc/cff9323ba0dd3e47.pdf",
        "source_pdf_pages": [
          1
        ],
        "source_sha256": "4c68eb89136670b51dc988b3b9bd4e5e6fb5667e2c1a7b27565b44281600fabb",
        "reason": "Visually inspected header and LD single-family row. Averaged lot-size standard was stated as a per-lot minimum. The table itself does not justify dropping average.",
        "proposed_replacement": "Single family: required **average lot size 10,000 square feet** and minimum lot width **50 feet**. Apply the additional lot-size provisions in Sec. 5.2.3.B.",
        "proposed_citation": "Sec. 5.1.1 chart (LD single-family row); Sec. 5.2.3.B",
        "publication_changed": false,
        "status": "error",
        "evidence": "Table heading: Average Lot Size. LD / Single family: 10,000 square feet; Minimum Lot Width (Feet): 50; Additional Regulations: Sec. 5.2.3.B."
      },
      {
        "id": "2b508f635ee2ffe5e048011fa0272257c698c31134ee6e263780be999a61e428",
        "municipality_slug": "fate-tx",
        "district_code": "A",
        "topic": "lot_coverage",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "Lot Coverage Percentage / All buildings on the lot (max): 20%.",
        "source_url": "https://www.fatetx.gov/DocumentCenter/View/4319/Article-III_Zoning-Districts_Final_20240701",
        "source_file": "sources/fate-tx/doc-4319.pdf",
        "source_pdf_pages": [
          5
        ],
        "source_sha256": "4b6da7d556edd57ef7d0acda1525c339398f8e2daa8df161a3f9034a50163ab2",
        "reason": "Visually inspected Fig.3.2-2. Published lot-coverage answer exposes internal facts.md/snapshot paths and withholds the explicit usable cap; it also attributes an open-space standard to a table that has no such row. This is answer incompleteness, not a wrong numeric extraction.",
        "proposed_replacement": "Maximum lot coverage for **all buildings on the lot is 20 percent** (Figure 3.2-2). Other applicable landscaping, parking, screening and drainage requirements must also be met.",
        "proposed_citation": "Article III §3.2.2, Figure 3.2-2",
        "publication_changed": false,
        "status": "error",
        "evidence": "Lot Coverage Percentage / All buildings on the lot (max): 20%."
      },
      {
        "id": "54821031d086711b33786480143cb808ff6edd36a36d3c1e9ed989b3fac72d74",
        "municipality_slug": "fate-tx",
        "district_code": "IND",
        "topic": "setbacks",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "Front: On Freeway, Freeway Frontage Road, or Arterial Roadway (min) 20; On All Other Streets (min) 20; Side: (min) 40; Rear: (min) 40.",
        "source_url": "https://www.fatetx.gov/DocumentCenter/View/4319/Article-III_Zoning-Districts_Final_20240701",
        "source_file": "sources/fate-tx/doc-4319.pdf",
        "source_pdf_pages": [
          27
        ],
        "source_sha256": "4b6da7d556edd57ef7d0acda1525c339398f8e2daa8df161a3f9034a50163ab2",
        "reason": "Visually inspected Fig.3.3-8. Generic internal-file referral omits the published topic's four readily stated requirements. No separate allegation is made that every generic site-planning caution is false.",
        "proposed_replacement": "IND minimum setbacks: **front 20 feet** on freeway, freeway frontage road, arterial roadway, and other streets; **side 40 feet**; **rear 40 feet**. Figure 3.3-8 lists no maximum front setback.",
        "proposed_citation": "Article III §3.3.5, Figure 3.3-8",
        "publication_changed": false,
        "status": "error",
        "evidence": "Front: On Freeway, Freeway Frontage Road, or Arterial Roadway (min) 20; On All Other Streets (min) 20; Side: (min) 40; Rear: (min) 40."
      },
      {
        "id": "7dddceb8ee2150db48ca423f708f7e7cd6151141da170e9074721616fca14591",
        "municipality_slug": "fate-tx",
        "district_code": "OTC",
        "topic": "height",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "Stories (min): 2, except for single-family detached residential. Stories (max): 4 or 55'; 5+ with SUP.",
        "source_url": "https://www.fatetx.gov/DocumentCenter/View/4319/Article-III_Zoning-Districts_Final_20240701",
        "source_file": "sources/fate-tx/doc-4319.pdf",
        "source_pdf_pages": [
          46
        ],
        "source_sha256": "4b6da7d556edd57ef7d0acda1525c339398f8e2daa8df161a3f9034a50163ab2",
        "reason": "Visually inspected Fig.3.5-14. Published internal-file referral gives no operative height figures or exception although the table is readable. Preserve the table's literal or rather than inventing which limit controls.",
        "proposed_replacement": "OTC height: **minimum 2 stories**, except single-family detached residential. The table lists **maximum 4 stories or 55 feet**, with **5 or more stories requiring an SUP**.",
        "proposed_citation": "Article III §3.5.7, Figure 3.5-14",
        "publication_changed": false,
        "status": "error",
        "evidence": "Stories (min): 2, except for single-family detached residential. Stories (max): 4 or 55'; 5+ with SUP."
      },
      {
        "id": "703caee380ce69ce0811ee404b5932e37bbc7aa410e85d300faac3a036751876",
        "municipality_slug": "fate-tx",
        "district_code": "PD",
        "topic": "lot_size",
        "decision": "confirmed_error",
        "error_class": "citation",
        "severity": "low",
        "original_assessment_status": "error",
        "original_error_class": "citation",
        "original_severity": "low",
        "operative_quote": "The request for Planned Development District zoning is considered a zoning change ... Section 2.5 shall apply. ... Planned Developments shall be 10 acres minimum.",
        "source_url": "https://www.fatetx.gov/DocumentCenter/View/4319/Article-III_Zoning-Districts_Final_20240701",
        "source_file": "sources/fate-tx/doc-4319.pdf",
        "source_pdf_pages": [
          49
        ],
        "source_sha256": "4b6da7d556edd57ef7d0acda1525c339398f8e2daa8df161a3f9034a50163ab2",
        "reason": "Visually inspected §3.5.8(B). The 10-acre result is correct, but the published claim that it came from a dimensional table area cell is false; it is enumerated prose. Internal file paths are not useful public citations.",
        "proposed_replacement": "Planned Development requires the applicable concept-plan and zoning-change review procedures. A PD must be **at least 10 acres**; standards are set through the approved PD.",
        "proposed_citation": "Article III §§3.5.2(1), 3.5.8(B)(1); Article II §2.5",
        "publication_changed": false,
        "status": "error",
        "evidence": "The request for Planned Development District zoning is considered a zoning change ... Section 2.5 shall apply. ... Planned Developments shall be 10 acres minimum."
      },
      {
        "id": "af5a5736ff2a3d2fb71a71ba43e2022cbb5fcbf7e95f6e79a212565233a57695",
        "municipality_slug": "forney-tx",
        "district_code": "2F",
        "topic": "lot_coverage",
        "decision": "confirmed_error",
        "error_class": "applicability",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "Maximum Lot Coverage for Two-Family/Duplex Homes - forty-five percent (45%) by main buildings and accessory buildings. Single-family lots and detached dwellings ... shall conform to ... SF-8.",
        "source_url": "https://www.forneytx.gov/DocumentCenter/View/3790/Zoning-Ordinance-2026-2",
        "source_file": ".tmp/accuracy/source-bodies/forney-tx/ec0647f623730dd0.pdf",
        "source_pdf_pages": [
          63,
          74
        ],
        "source_sha256": "e64b5653af24dd76279b80906c4d5d624479ddc534a0aa296f831ff84ef9b497",
        "reason": "Read §§22.4.C,22.5.A and19.4.C. The 45% is not universal within2F; single-family follows40%. Reclassified from omission to applicability because a use-specific standard was applied to the whole district.",
        "proposed_replacement": "For two-family/duplex homes in 2F, maximum lot coverage is **45 percent**, including main and accessory buildings (§22.4.C). Single-family lots and detached dwellings follow SF-8 standards (§22.5.A), including **40 percent** maximum coverage (§19.4.C).",
        "proposed_citation": "§§22.4.C, 22.5.A, 19.4.C",
        "publication_changed": false,
        "status": "error",
        "evidence": "Maximum Lot Coverage for Two-Family/Duplex Homes - forty-five percent (45%) by main buildings and accessory buildings. Single-family lots and detached dwellings ... shall conform to ... SF-8."
      },
      {
        "id": "f0951aa27cd444e4b860b5f81232d3175f4b9a51c2d80e89a3981d1b6a2bba2b",
        "municipality_slug": "forney-tx",
        "district_code": "CBT",
        "topic": "special_land_uses",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "For existing structures/uses ... Any existing parking, or lack of same ... shall be considered a conforming parking arrangement. ... For new structures and uses - as required in the base zoning district. ... Open storage is prohibited in the CBT district.",
        "source_url": "https://www.forneytx.gov/DocumentCenter/View/3790/Zoning-Ordinance-2026-2",
        "source_file": ".tmp/accuracy/source-bodies/forney-tx/ec0647f623730dd0.pdf",
        "source_pdf_pages": [
          125,
          126,
          128
        ],
        "source_sha256": "e64b5653af24dd76279b80906c4d5d624479ddc534a0aa296f831ff84ef9b497",
        "reason": "Read complete operative parking clauses, site-plan requirements and open-storage prohibition. Published all-parking base-district claim conflicts with express existing-structure protection. Architecture-only characterization also omits operational conditions.",
        "proposed_replacement": "CBT generally carries the base district's permitted/conditional uses and dimensional standards. Existing structures and uses have protected existing parking arrangements under §34c.4.E(1); additions, significant use expansion and reconstruction have stated conditions. New structures and uses follow base-district parking. Open storage is prohibited. Site redevelopment/new structures require approved site plans, and applicable work requires facade approval; development standards are established on the approved site plan.",
        "proposed_citation": "§§34c.2, 34c.4.E, 34c.5",
        "publication_changed": false,
        "status": "error",
        "evidence": "For existing structures/uses ... Any existing parking, or lack of same ... shall be considered a conforming parking arrangement. ... For new structures and uses - as required in the base zoning district. ... Open storage is prohibited in the CBT district."
      },
      {
        "id": "704e7a2150cbb91b9b49e3138895e9b08f5722935d359180ffee3e884ceaaec0",
        "municipality_slug": "gallatin-tn",
        "district_code": "CS",
        "topic": "setbacks",
        "decision": "unresolved",
        "error_class": null,
        "severity": null,
        "original_assessment_status": "error",
        "original_error_class": "applicability",
        "original_severity": "medium",
        "operative_quote": "Greater yard and building setbacks may be required when the CS zoned properties are located adjacent to a separate zoning district ... Section13.03. Setbacks from roadways scheduled for widening ... projected future right-of-way line.",
        "source_url": "https://gallatintn.gov/DocumentCenter/View/1120",
        "source_file": ".tmp/accuracy/source-bodies/gallatin-tn/9cccd3f8b3c9a855.pdf",
        "source_pdf_pages": [
          8
        ],
        "source_sha256": "08b23cc78538848f2b9897c9ea881468258f60d5e62e77a8802e03a157ab91f3",
        "reason": "The cited CS provision supports10/10/20ft but contains no corner-lot sentence. Absence in this section alone does not prove no general corner rule, and saying buffers can apply next to residential districts does not literally deny other adjacencies. Do not count as confirmed error without completing general provisions. Separately, current official page labels this code previous and applicable only to EPD; current-law applicability requires substantive review.",
        "proposed_replacement": "Pending currency review: do not publish a generic current CS verdict. For an actually applicable legacy CS rule, state10ftfront,10ftside,20ftrear, separate-district bufferyard qualification and future-right-of-way measurement; include corner rule only after a controlling citation is established.",
        "proposed_citation": "Previous code §08.02.030; current-code/EPD applicability must be resolved",
        "publication_changed": false,
        "status": "unassessed",
        "evidence": "Greater yard and building setbacks may be required when the CS zoned properties are located adjacent to a separate zoning district ... Section13.03. Setbacks from roadways scheduled for widening ... projected future right-of-way line."
      },
      {
        "id": "05e4a531d7254d566b048458f0513f513da3281d091d004c4b3f2cc30e299dd5",
        "municipality_slug": "hendersonville-tn",
        "district_code": "ER",
        "topic": "setbacks",
        "decision": "false_positive",
        "error_class": null,
        "severity": null,
        "original_assessment_status": "error",
        "original_error_class": "applicability",
        "original_severity": "low",
        "operative_quote": "ER cells: front40; side street35; side20; rear35. Footnotes2,3,5,6 attach to other cells, not ER.",
        "source_url": "https://www.hvilletn.org/DocumentCenter/View/439/2025-Zoning-Ordinance-2025-19-PDF",
        "source_file": ".tmp/accuracy/source-bodies/hendersonville-tn/7a329742bb4abdce.pdf",
        "source_pdf_pages": [
          87,
          88
        ],
        "source_sha256": "88e06cf9b3c31823b8fa3f73b81238eed1504bfd00f214c1c51730dbc291c9fb",
        "reason": "Visually inspected ER column and note markers. All four published base values match. The generic sentence says table notes can modify listed conditions; it does not actually assign a different ER value or affirm those notes attach to ER. Ambiguous boilerplate merits clarification, but an inferred application is insufficient for a confirmed factual error.",
        "proposed_replacement": "Optional clarity edit: Base yards in ER: front **40 feet**, side-street **35 feet**, side **20 feet**, rear **35 feet** (Chapter6.3,Table4). Do not import footnotes attached only to other districts.",
        "proposed_citation": "Chapter6.3,Table4",
        "publication_changed": false,
        "status": "supported",
        "evidence": "ER cells: front40; side street35; side20; rear35. Footnotes2,3,5,6 attach to other cells, not ER."
      },
      {
        "id": "3c8d9c7af20da296f5026349f7c867dafeb92dd2315837fc9fc7c3ce9c7d113f",
        "municipality_slug": "holly-springs-nc",
        "district_code": "NMX",
        "topic": "lot_size",
        "decision": "false_positive",
        "error_class": null,
        "severity": null,
        "original_assessment_status": "error",
        "original_error_class": "transcription",
        "original_severity": "low",
        "operative_quote": "NMX Minimum Development Area (acres) (N1):0. N1:Applicable to sites that are greater than5acres.",
        "source_url": "https://www.hollyspringsnc.gov/DocumentCenter/View/37679/Section-2-Districts",
        "source_file": ".tmp/accuracy/source-bodies/holly-springs-nc/159408aec3190b53.pdf",
        "source_pdf_pages": [
          9,
          10
        ],
        "source_sha256": "6363914822ebfda13aa2d0e2e97a1b7b583aa88f1c78e6a51ee5a03d2be31bdd",
        "reason": "Visually inspected table and N1. Published no minimum below5acres is true because the row applies only above5acres. The source also gives zero above5acres. The assessor inferred an unstated positive requirement above5; the product never states one. Incomplete clarity is not a proven false requirement.",
        "proposed_replacement": "Optional clarity edit: NMX minimum development area is **0 acres** in Table2.2.2-A; NoteN1 applies that row to sites greater than5acres. Retain the separately correct frontage and floor-area figures.",
        "proposed_citation": "Table2.2.2-A andNoteN1",
        "publication_changed": false,
        "status": "supported",
        "evidence": "NMX Minimum Development Area (acres) (N1):0. N1:Applicable to sites that are greater than5acres."
      },
      {
        "id": "174aa12f613e108953a4d73669774748688949a24ae044ad235460dd5cd98482",
        "municipality_slug": "lebanon-tn",
        "district_code": "RMH",
        "topic": "lot_coverage",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "Mobile home stands shall not occupy an area in excess of twenty-five (25) percent of the respective lot area. The total area occupied by the mobile home and its accessory structures shall not exceed fifty (50) percent of the respective space area.",
        "source_url": "https://www.lebanontn.org/DocumentCenter/View/6419",
        "source_file": ".tmp/accuracy/source-bodies/lebanon-tn/6f2e3a71e7e71c85.pdf",
        "source_pdf_pages": [
          17
        ],
        "source_sha256": "17473dbeb455a77c0df193a7303674959ac16e9ef3aa7609685cfdf0df2c6cc0",
        "reason": "Read RMH§13 park-specific standards. First clause is narrowly about the lot-development table, but the following assertion that bulk is controlled through other means instead omits explicit coverage caps for a central allowed use. Preserve park applicability rather than impose these caps on allRMHdevelopment.",
        "proposed_replacement": "The general RMH lot-development table does not list a districtwide coverage cap. **Mobile-home parks have specific caps:** mobile-home stands may occupy no more than **25 percent** of their respective lot area, and a mobile home plus accessory structures may occupy no more than **50 percent** of the respective space area (§13,SpacingofMobileHomesandSiteCoverage).",
        "proposed_citation": "§14.303RMH,§13,SpacingofMobileHomesandSiteCoverage",
        "publication_changed": false,
        "status": "error",
        "evidence": "Mobile home stands shall not occupy an area in excess of twenty-five (25) percent of the respective lot area. The total area occupied by the mobile home and its accessory structures shall not exceed fifty (50) percent of the respective space area."
      },
      {
        "id": "afb0f4420c6e54623988ae62c00fd429d2beaf29cb0991b995a479c66f830851",
        "municipality_slug": "lebanon-tn",
        "district_code": "RPI",
        "topic": "permitted_uses",
        "decision": "confirmed_error",
        "error_class": "transcription",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "transcription",
        "original_severity": "low",
        "operative_quote": "the total area of residential parcels cannot exceed85%of the total area of all development parcels in each polygon of this zoning district.",
        "source_url": "https://www.lebanontn.org/DocumentCenter/View/6391",
        "source_file": ".tmp/accuracy/source-bodies/lebanon-tn/3ddfc9670170cdbf.pdf",
        "source_pdf_pages": [
          1
        ],
        "source_sha256": "9b76caced6a3fced50dd16fc91f769a0961d322f0f8f5456af18528e230f83d9",
        "reason": "Read RPI§4. Published denominator is all polygon land rather than development parcels. This can overstate residential allocation if public rights-of-way or other excluded land are in the polygon; medium severity rather than purely cosmetic low.",
        "proposed_replacement": "Retain the verified use list and qualifications. Replace the85%sentence with: Residential parcels cannot exceed **85 percent of the total area of all development parcels in each RPI polygon**.",
        "proposed_citation": "RPI§4LandUses",
        "publication_changed": false,
        "status": "error",
        "evidence": "the total area of residential parcels cannot exceed85%of the total area of all development parcels in each polygon of this zoning district."
      },
      {
        "id": "bde88fba92c760f438c939a20cc24336b36591328f5c91e59eac626d5397ed27",
        "municipality_slug": "orion-township",
        "district_code": "BIZ",
        "topic": "permitted_uses",
        "decision": "confirmed_error",
        "error_class": "applicability",
        "severity": "high",
        "original_assessment_status": "error",
        "original_error_class": "applicability",
        "original_severity": "high",
        "operative_quote": "The requirements of this Section shall be applied in addition to the requirements of the applicable zoning districts and other applicable sections ... Where conflicts exist ... this Section shall supersede.",
        "source_url": "https://cms9files.revize.com/oriontwp/Zoning%20Ordinance/section%2034%20Final.pdf",
        "source_file": ".tmp/accuracy/source-bodies/orion-township/93bd158f5dce9f12.pdf",
        "source_pdf_pages": [
          1
        ],
        "source_sha256": "c95884b7aa8bd0d81d47bcf7094ceb46bbb3dace625481dc09b9eb98531986be",
        "reason": "Section 34.01A expressly incorporates corresponding district standards. The published direction not to apply general district tables reverses this requirement.",
        "proposed_replacement": "BIZ standards apply in addition to the applicable zoning district and other ordinance requirements. The Planning Commission determines the corresponding district based on the permitted uses; BIZ provisions control conflicts. Apply permitted/prohibited use Tables 34-1 and 34-2 and the conditions in Section 34.01B-D.",
        "proposed_citation": "Article XXXIV, Section 34.01A-D",
        "publication_changed": false,
        "status": "error",
        "evidence": "The requirements of this Section shall be applied in addition to the requirements of the applicable zoning districts and other applicable sections ... Where conflicts exist ... this Section shall supersede."
      },
      {
        "id": "780db8cd7418126b821fc0725001f7a7a3783c7cea56783ad9c4737b8b40703e",
        "municipality_slug": "orion-township",
        "district_code": "GB",
        "topic": "permitted_uses",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "Outdoor display and sales shall not exceed ten percent (10%) of the building or one thousand (1,000) square feet, whichever is less.",
        "source_url": "https://cms9files.revize.com/oriontwp/Zoning%20Ordinance/section%2014%20Final.pdf",
        "source_file": ".tmp/accuracy/source-bodies/orion-township/ea35233ffca8ccfd.pdf",
        "source_pdf_pages": [
          4
        ],
        "source_sha256": "6f1070261911288a7d9857f65b87aa7f8ebe4d55a238532af15038f585cb7bae",
        "reason": "Published 1,000-square-foot allowance omits the smaller building-relative limit.",
        "proposed_replacement": "Replace the outdoor-display phrase with: outdoor display and sales limited to 10 percent of the building or 1,000 square feet, whichever is less, subject to Section 14.02G, including administrative review and permitting.",
        "proposed_citation": "Section 14.02G",
        "publication_changed": false,
        "status": "error",
        "evidence": "Outdoor display and sales shall not exceed ten percent (10%) of the building or one thousand (1,000) square feet, whichever is less."
      },
      {
        "id": "b0bb98aa8263c566e4c72c02f64e86a6533df96866f341a6c55ab49277f54a7e",
        "municipality_slug": "orion-township",
        "district_code": "LI",
        "topic": "permitted_uses",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "low",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "low",
        "operative_quote": "Outdoor patio P E. Restaurant uses may also include outdoor patio subject to administrative review by the Building Department.",
        "source_url": "https://cms9files.revize.com/oriontwp/Zoning%20Ordinance/section%2016%20Final.pdf",
        "source_file": ".tmp/accuracy/source-bodies/orion-township/41bff0702ba7b300.pdf",
        "source_pdf_pages": [
          2,
          3
        ],
        "source_sha256": "eb7eba1710c29e2da3e847ca5c9d065997cf3b24521dae9a2aca398d28ead71f",
        "reason": "The published detailed use enumeration omits outdoor patios. This is accessory to restaurant uses and does not remove restaurant special-use approval.",
        "proposed_replacement": "Add: Outdoor patios accessory to restaurant uses are allowed subject to the administrative review in Section 16.02E; this does not remove the special-use approval required for the restaurant.",
        "proposed_citation": "Sections 16.01 and 16.02E",
        "publication_changed": false,
        "status": "error",
        "evidence": "Outdoor patio P E. Restaurant uses may also include outdoor patio subject to administrative review by the Building Department."
      },
      {
        "id": "3b5ce53edeecef02a99558de28b814a253b0c5914d3af018df7f6f2923067aca",
        "municipality_slug": "rockwall-tx",
        "district_code": "DT",
        "topic": "height",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "Minimum building height: 2 stories. Maximum building height: 4 stories [square/other blocks]; 2 stories [blocks facing single-family]. Maximum building height shall be two (2) stories when within 200 feet of single-family zoned property.",
        "source_url": "https://www.rockwall.com/pz/Planning/Documents/Unified%20Development%20Code%20(UDC).pdf",
        "source_file": "sources/rockwall-tx/udc.pdf",
        "source_pdf_pages": [
          72,
          73
        ],
        "source_sha256": "6254fbc35492bb831cc35fef5df22e76d7afd0b0c3b3ecef2f9019523f181703",
        "reason": "Visually inspected Table 1 and read fourth-floor setback and waiver clauses. Internal draft referral is not an operative height answer.",
        "proposed_replacement": "DT buildings require at least 2 stories. Maximum height is 4 stories on blocks facing the square and other blocks, and 2 stories on blocks facing single-family; the maximum is also 2 stories within 200 feet of single-family-zoned property. Buildings above 3 stories must set the fourth floor back at least 8 feet behind the first-three-story street-facing building face. Feature-building height increases require a minor waiver at site-plan review; other added height and changes to the fourth-floor setback require a major waiver.",
        "proposed_citation": "Article 05, Section 04.07, Table 1 notes 1 and 3; Section 04.07D.2.b(1)",
        "publication_changed": false,
        "status": "error",
        "evidence": "Minimum building height: 2 stories. Maximum building height: 4 stories [square/other blocks]; 2 stories [blocks facing single-family]. Maximum building height shall be two (2) stories when within 200 feet of single-family zoned property."
      },
      {
        "id": "e440b6d8a7ff46a8dabd34a54d6fb9e35b70f3e541aca53912d7c913645edb33",
        "municipality_slug": "rockwall-tx",
        "district_code": "SRO",
        "topic": "permitted_uses",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "Unless otherwise addressed in this section, all other standards and requirements of the underlying zoning district shall govern. ... Special requests shall not include any request to change the land use of a property.",
        "source_url": "https://www.rockwall.com/pz/Planning/Documents/Unified%20Development%20Code%20(UDC).pdf",
        "source_file": "sources/rockwall-tx/udc.pdf",
        "source_pdf_pages": [
          83,
          94
        ],
        "source_sha256": "6254fbc35492bb831cc35fef5df22e76d7afd0b0c3b3ecef2f9019523f181703",
        "reason": "SRO is an overlay; the published internal use-table referral omits the operative base-district rule and limitation on special requests.",
        "proposed_replacement": "SRO is an overlay. Apply the underlying zoning district land-use permissions unless the overlay addresses the requirement; SRO governs conflicts. A neighborhood-preservation special request under Section 06.05B cannot change a property land use. Determine the underlying district and apply its use schedule and any relevant overlay conditions.",
        "proposed_citation": "Article 05, Sections 06.01 and 06.05B; Article 04 use schedule",
        "publication_changed": false,
        "status": "error",
        "evidence": "Unless otherwise addressed in this section, all other standards and requirements of the underlying zoning district shall govern. ... Special requests shall not include any request to change the land use of a property."
      },
      {
        "id": "588eee93b72326ef92557432df78cb22e439d2029f63032889bf432972681c56",
        "municipality_slug": "royal-oak",
        "district_code": "1FL",
        "topic": "special_land_uses",
        "decision": "false_positive",
        "error_class": null,
        "severity": null,
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "All special land uses allowed in the One-Family Residential Zone.",
        "source_url": "https://ecode360.com/4478808",
        "source_file": "review/freshness-2026-10-19/royal-oak-ch770.pdf",
        "source_pdf_pages": [
          49,
          51
        ],
        "source_sha256": "edf9a0dc22364296a4640053d5721e57f50caeb9b787a9d6e0c6733fad607cb8",
        "reason": "Section 770-35C lists special uses by incorporating the One-Family zone. The published answer correctly directs readers to that controlling section and states no false permission. The assessor treated the valid public cross-reference as a substantive error.",
        "proposed_replacement": "Optional clarification only: 1FL incorporates the One-Family special land uses through Section 770-35C(1), referring to Section 770-34C.",
        "proposed_citation": "Sections 770-35C(1), 770-34C",
        "publication_changed": false,
        "status": "supported",
        "evidence": "All special land uses allowed in the One-Family Residential Zone."
      },
      {
        "id": "4ffc3b2da75d67ba1b0341ea3a931486a3aae40e12cb1e4ca2923486e5e79bd6",
        "municipality_slug": "spring-hill-tn",
        "district_code": "R-5",
        "topic": "setbacks",
        "decision": "confirmed_error",
        "error_class": "omission",
        "severity": "medium",
        "original_assessment_status": "error",
        "original_error_class": "omission",
        "original_severity": "medium",
        "operative_quote": "R-5: Front build-to 20 to 25 feet [single-, two-, three-family]; townhomes 20 feet. Interior side 5 feet [single-family], 5 feet from side lot line or 10 feet between residential buildings [two-/three-family], none [townhomes]. Corner side 10 feet [single-/two-/three-family], none [townhomes]. Reverse corner side 20 feet; rear 25 feet.",
        "source_url": "https://www.springhilltn.org/DocumentCenter/View/10522/Unified-Development-Code--Revised-December-2025",
        "source_file": ".tmp/accuracy/source-bodies/spring-hill-tn/b94e760b96866e2f.pdf",
        "source_pdf_pages": [
          48,
          49,
          111
        ],
        "source_sha256": "197190cf5a6440db0ca8dbbf90345f319f4bee6f94def5f40e1ec5e65e29c67f",
        "reason": "Visually inspected table continuation and townhome footnote. Published setbacks answer lists other bulk facts but omits all operative setbacks. Townhome individual-lot none cannot be construed as no site perimeter requirements.",
        "proposed_replacement": "R-5 setbacks: single-, two- and three-family front build-to range 20 to 25 feet; individual townhome lots front 20 feet. Interior side: single-family 5 feet; two-/three-family 5 feet from side lot line or 10 feet between residential buildings; individual townhome lots none. Corner side: single-/two-/three-family 10 feet; individual townhome lots none. Reverse corner side 20 feet; rear 25 feet. Apply Section 8.3K.1 townhome/multifamily building-separation and perimeter-yard requirements in addition to the individual-lot entries.",
        "proposed_citation": "Table 4-1 (R-5), including continuation and townhome footnote; Section 8.3K.1",
        "publication_changed": false,
        "status": "error",
        "evidence": "R-5: Front build-to 20 to 25 feet [single-, two-, three-family]; townhomes 20 feet. Interior side 5 feet [single-family], 5 feet from side lot line or 10 feet between residential buildings [two-/three-family], none [townhomes]. Corner side 10 feet [single-/two-/three-family], none [townhomes]. Reverse corner side 20 feet; rear 25 feet."
      }
    ]
  }
}
